Skip to contentSkip to conversation

Scheduler tests

PATCH Superseded Derek Morton 4 participants 15 messages Feb 12, 2016 – Mar 3, 2016 Library code

v1 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

cover Scheduler tests

This patch set adds scheduler tests.
Patch 1 adds library code used by the tests. There are other tests under development which are planned to reuse some of these libraries. Patch 2 adds some basic tests, read dependency tests and write dependency tests. Patch 3 Is the patch previously submitted by John Harrison to update gem_ctx_param_basic with ioctls to set context priorities. It is included as part of this patch set as Patch 4 is dependant on it.
Patch 4 adds tests to check sheduler behaviour for batch buffers submitted at differing priorities.

Derek Morton (3):
lib/igt_bb_factory: Add igt_bb_factory library tests/gem_scheduler: Add gem_scheduler test tests/gem_scheduler: Add subtests to test batch priority behaviour

John Harrison (1):
igt/gem_ctx_param_basic: Updated to support scheduler priority
interface

 lib/Makefile.sources        |   2 +
 lib/igt.h                   |   1 +
 lib/igt_bb_factory.c        | 401 +++++++++++++++++++++++++++++++++++++++++
 lib/igt_bb_factory.h        |  47 +++++
 lib/ioctl_wrappers.h        |   1 +
 tests/Makefile.sources      |   1 +
 tests/gem_ctx_param_basic.c |  34 +++-
 tests/gem_scheduler.c       | 431 ++++++++++++++++++++++++++++++++++++++++++++
 8 files changed, 917 insertions(+), 1 deletion(-)
 create mode 100644 lib/igt_bb_factory.c
 create mode 100644 lib/igt_bb_factory.h
 create mode 100644 tests/gem_scheduler.c
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#1 lore raw

PATCH 1/4 lib/igt_bb_factory: Add igt_bb_factory library

Adds functions to create a number of different batch buffers to perform several functions including:
Batch buffer which will run for a long duration to provide a delay on a specified ring.
Function to calibrate the delay batch buffer to run for a specified period of time.
Function to create a batch buffer which writes timestamps to a buffer object. Function to compare timestamps allowing for wrapping of the values.

Intended for use by the gem_scheduler test initially but will be used by other tests in development.

---
 lib/Makefile.sources |   2 +
 lib/igt.h            |   1 +
 lib/igt_bb_factory.c | 401 +++++++++++++++++++++++++++++++++++++++++++++++++++
 lib/igt_bb_factory.h |  47 ++++++
 4 files changed, 451 insertions(+)
 create mode 100644 lib/igt_bb_factory.c
 create mode 100644 lib/igt_bb_factory.h
lib/Makefile.sources +2 -0
index 4999868..c560b3e 100644
@@ -7,6 +7,8 @@ libintel_tools_la_SOURCES = 	\
 	i915_reg.h		\
 	i915_pciids.h		\
 	igt.h			\
+	igt_bb_factory.c	\
+	igt_bb_factory.h	\
 	igt_debugfs.c		\
 	igt_debugfs.h		\
 	igt_aux.c		\
lib/igt.h +1 -0
index 3be2551..0f29420 100644
@@ -36,6 +36,7 @@
 #include "igt_gt.h"
 #include "igt_kms.h"
 #include "igt_stats.h"
+#include "igt_bb_factory.h"
 #include "instdone.h"
 #include "intel_batchbuffer.h"
 #include "intel_chipset.h"
lib/igt_bb_factory.c new file +401 -0

401 lines not on this page · raw message

lib/igt_bb_factory.h new file +47 -0

47 lines not on this page · raw message

Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#2 lore raw

Re: [PATCH i-g-t 1/4] lib/igt_bb_factory: Add igt_bb_factory library

Quoted 9 lines · Derek Morton

Adds functions to create a number of different batch buffers to perform several functions including:
Batch buffer which will run for a long duration to provide a delay on a specified ring.
Function to calibrate the delay batch buffer to run for a specified period of time.
Function to create a batch buffer which writes timestamps to a buffer object. Function to compare timestamps allowing for wrapping of the values.

Quoted 4 lines

Intended for use by the gem_scheduler test initially but will be used by other tests in development.

We already have batchbuffer factories and stuff in intel_batchbuffer.c. Integrating it there also relieves from adding a dummy and fairly useless topic section header in the docs.
-Daniel

Quoted 497 lines
---
 lib/Makefile.sources |   2 +
 lib/igt.h            |   1 +
 lib/igt_bb_factory.c | 401 +++++++++++++++++++++++++++++++++++++++++++++++++++
 lib/igt_bb_factory.h |  47 ++++++
 4 files changed, 451 insertions(+)
 create mode 100644 lib/igt_bb_factory.c
 create mode 100644 lib/igt_bb_factory.h
lib/Makefile.sources +2 -0
index 4999868..c560b3e 100644
@@ -7,6 +7,8 @@ libintel_tools_la_SOURCES = 	\
 	i915_reg.h		\
 	i915_pciids.h		\
 	igt.h			\
+	igt_bb_factory.c	\
+	igt_bb_factory.h	\
 	igt_debugfs.c		\
 	igt_debugfs.h		\
 	igt_aux.c		\
lib/igt.h +1 -0
index 3be2551..0f29420 100644
@@ -36,6 +36,7 @@
 #include "igt_gt.h"
 #include "igt_kms.h"
 #include "igt_stats.h"
+#include "igt_bb_factory.h"
 #include "instdone.h"
 #include "intel_batchbuffer.h"
 #include "intel_chipset.h"
lib/igt_bb_factory.c new file +401 -0
new file mode 100644
index 0000000..eea63c6
@@ -0,0 +1,401 @@
+/*
+ * Copyright © 2016 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ * Authors:
+ *    Derek Morton <[email protected]>
+ *
+ */
+
+#include "igt.h"
+#include "intel_batchbuffer.h"
+#include <stdint.h>
+#include <inttypes.h>
+#include <time.h>
+
+#define SEC_TO_NSEC (1000 * 1000 * 1000)
+#define DWORDS_TO_BYTES(x) ((x)*4)
+
+#define MI_STORE_REGISTER_MEM(LENGTH)   ((0x024 << 23) | ((LENGTH - 2) & 0xff))
+#define MI_MATH(NrInst)                 ((0x01A << 23) | ((NrInst - 1) & 0x3f))
+#define MI_CONDITIONAL_BATCH_BUFFER_END ((0x036 << 23) | (1 << 21) | 2)
+#define MI_COPY_MEM_MEM                 ((0x02E << 23) | (3))
+
+#define ALU_LOAD(TO, FROM)  ((0x080 << 20) | ((TO) << 10) | (FROM))
+#define ALU_SUB             ( 0x101 << 20)
+#define ALU_STORE(TO, FROM) ((0x180 << 20) | ((TO) << 10) | (FROM))
+
+#define TIMESTAMP_offset      (0x358) /* Elapsed time from system start */
+#define CTX_TIMESTAMP_offset  (0x3A8) /* Elapsed Time from context creation */
+#define ALU_GPU_R0_LSB_offset (0x600)
+#define ALU_GPU_R0_MSB_offset (0x604)
+#define ALU_GPU_R1_LSB_offset (0x608)
+#define ALU_GPU_R1_MSB_offset (0x60C)
+#define ALU_GPU_R2_LSB_offset (0x610)
+#define ALU_GPU_R2_MSB_offset (0x614)
+
+#define ALU_R0_ENCODING   (0x00)
+#define ALU_R1_ENCODING   (0x01)
+#define ALU_SRCA_ENCODING (0x20)
+#define ALU_SRCB_ENCODING (0x21)
+#define ALU_ACCU_ENCODING (0x31)
+
+/**
+ * SECTION:igt_bb_factory
+ * @short_description: Utility functions for creating batch buffers
+ * @title: Batch Buffer Factory
+ * @include: igt.h
+ *
+ * This library implements functions for creating batch buffers which may be
+ * useful to multiple tests.
+ */
+
+static void check_gen_8(int fd)
+{
+	static bool checked = false;
+	if(!checked) {
+		igt_require(intel_gen(intel_get_drm_devid(fd)) >= 8);
+		checked = true;
+	}
+}
+
+static int bb_address_size_dw(int fd)
+{
+	if (intel_gen(intel_get_drm_devid(fd)) >= 8)
+		return 2;
+	else
+		return 1;
+}
+
+static uint32_t get_register_offset(int ringid)
+{
+	switch (ringid) {
+	case I915_EXEC_RENDER:
+		return 0x02000;
+	case I915_EXEC_BSD:
+		return 0x12000;
+	case I915_EXEC_BLT:
+		return 0x22000;
+	case I915_EXEC_VEBOX:
+		return 0x1A000;
+	default:
+		igt_assert_f(0, "Invalid ringid %d passed to get_register_offset()\n", ringid);
+	}
+}
+
+/**
+ * igt_create_delay_bb:
+ * @fd: file descriptor for i915 driver instance
+ * @bufmgr: Buffer manager to be used for creation of batch buffers
+ * ringid: Ring to create batch buffer for. e.g. I915_EXEC_RENDER
+ * loops: Number of times to loop
+ * dest: Buffer to use for saving the current loop count and timestamp.
+ *
+ * This creates a batch buffer which will iterate a loop a specified number
+ * of times. Intended for creating batch buffers which take an arbitarily
+ * long time to execute. This can be useful to keep a ring busy while
+ * constructing a test scenario.
+ *
+ * The dest buffer will have a number of Dwords written by the batch buffer
+ * when it runs. They are:
+ * DW0 & DW1 - These are loade with the value of 'loops' and are decremented
+ *             as the batch buffer executes. They will be 0 after the batch
+ *             buffer completes if it finished succesfully.
+ * DW2 Timestamp - An indication of when the batch buffer ran allowing a
+ *                 comparison between batch buffers to show execution order.
+ *                 May wrap so igt_compare_timestamps() should be used to
+ *                 compare timestamps.
+ *
+ * Returns:
+ * The struct intel_batchbuffer created.
+ */
+struct intel_batchbuffer *igt_create_delay_bb(int fd, drm_intel_bufmgr *bufmgr,
+		int ringid, uint32_t loops, drm_intel_bo *dest)
+{
+	struct intel_batchbuffer *batch;
+	int addr_size_dw;
+	uint32_t regOffset;
+
+	check_gen_8(fd);
+
+	addr_size_dw = bb_address_size_dw(fd);
+	regOffset = get_register_offset(ringid);
+	batch = intel_batchbuffer_alloc(bufmgr, intel_get_drm_devid(fd));
+	igt_assert(batch);
+
+	BEGIN_BATCH(32, 5);
+	/* store current timestamp in DW2 */
+	OUT_BATCH(MI_STORE_REGISTER_MEM(addr_size_dw + 2));
+	OUT_BATCH(regOffset + TIMESTAMP_offset);
+	OUT_RELOC(dest, I915_GEM_DOMAIN_INSTRUCTION, I915_GEM_DOMAIN_INSTRUCTION, DWORDS_TO_BYTES(2));
+
+	/* Load R0 with loops */
+	OUT_BATCH(MI_LOAD_REGISTER_IMM);
+	OUT_BATCH(regOffset + ALU_GPU_R0_LSB_offset);
+	OUT_BATCH(loops);
+	OUT_BATCH(MI_LOAD_REGISTER_IMM);
+	OUT_BATCH(regOffset + ALU_GPU_R0_MSB_offset);
+	OUT_BATCH(0x00000000);
+	/* Load R1 with 1 */
+	OUT_BATCH(MI_LOAD_REGISTER_IMM);
+	OUT_BATCH(regOffset + ALU_GPU_R1_LSB_offset);
+	OUT_BATCH(0x00000001);
+	OUT_BATCH(MI_LOAD_REGISTER_IMM);
+	OUT_BATCH(regOffset + ALU_GPU_R1_MSB_offset);
+	OUT_BATCH(0x00000000);
+	/* Copy R0 / R1 into SRCA / SRCB, Perform R0 - R1, Store result in R0 */
+	/* e.g. R0 -= 1 */
+	OUT_BATCH(MI_MATH(4));
+	OUT_BATCH(ALU_LOAD(ALU_SRCA_ENCODING, ALU_R0_ENCODING));
+	OUT_BATCH(ALU_LOAD(ALU_SRCB_ENCODING, ALU_R1_ENCODING));
+	OUT_BATCH(ALU_SUB);
+	OUT_BATCH(ALU_STORE(ALU_R0_ENCODING, ALU_ACCU_ENCODING));
+	/* Copy R0 to dest
+	 * On Gen8 MI_CONDITIONAL_BATCH_BUFFER_END BSD ring Compare address
+	 * points to 2 Dwords, a mask (DW0) and data (DW1) which are ANDed
+	 * together.
+	 * On Gen9+, and the other rings on Gen8 Compare address points to
+	 * just Data (DW0). For simplicity always copy R0 LSB to DW0 and DW1.
+	 */
+	OUT_BATCH(MI_STORE_REGISTER_MEM(addr_size_dw + 2));
+	OUT_BATCH(regOffset + ALU_GPU_R0_LSB_offset);
+	OUT_RELOC(dest, I915_GEM_DOMAIN_INSTRUCTION, I915_GEM_DOMAIN_INSTRUCTION, 0);
+	OUT_BATCH(MI_STORE_REGISTER_MEM(addr_size_dw + 2));
+	OUT_BATCH(regOffset + ALU_GPU_R0_LSB_offset);
+	OUT_RELOC(dest, I915_GEM_DOMAIN_INSTRUCTION, I915_GEM_DOMAIN_INSTRUCTION, DWORDS_TO_BYTES(1));
+	/* Repeat until R0 == 0 */
+	OUT_BATCH(MI_CONDITIONAL_BATCH_BUFFER_END);
+	OUT_BATCH(0x00000000);
+	OUT_RELOC(dest, I915_GEM_DOMAIN_INSTRUCTION, I915_GEM_DOMAIN_INSTRUCTION, 0);
+	OUT_BATCH(MI_BATCH_BUFFER_START | (addr_size_dw - 1));
+	OUT_RELOC(batch->bo, I915_GEM_DOMAIN_INSTRUCTION, 0, DWORDS_TO_BYTES(15));
+	/* Should never get here, but end if it happens */
+
+	OUT_BATCH(MI_BATCH_BUFFER_END);
+	ADVANCE_BATCH();
+
+	return batch;
+}
+
+/**
+ * igt_create_timestamp_bb:
+ * @fd: file descriptor for i915 driver instance
+ * @bufmgr: Buffer manager to be used for creation of batch buffers
+ * ringid: Ring to create batch buffer for. e.g. I915_EXEC_RENDER
+ * dest: Buffer to use for saving the timestamps.
+ * load: Buffer to access. Set NULL if not required.
+ * write: If true and load is not NULL, will also write a timestamp to load
+ * buffer. If false and load is not NULL, will read from load buffer into dest.
+ * Intended for dependency checking.
+ *
+ * This creates a batch buffer which writes timestamps into a buffer object.
+ * If 'load' is non null, data is either written to 'load' or copied from 'load'
+ * depending on whether 'write' is set.
+ *
+ * The dest buffer will have a number of Dwords written by the batch buffer
+ * when it runs. They are:
+ * DW0 Reported timestamp - An indication of when the batch buffer ran allowing a
+ *                          comparison between batch buffers to show execution order.
+ *                          May wrap so igt_compare_timestamps() should be used to
+ *                          compare timestamps.
+ * DW1 Context timestamp - Elapsed time since context was created.
+ * DW2 Value copied from DW0 of load if write == false
+ *
+ * Returns:
+ * The struct intel_batchbuffer created.
+ */
+struct intel_batchbuffer *igt_create_timestamp_bb(int fd, drm_intel_bufmgr *bufmgr,
+		int ringid, drm_intel_bo *dest, drm_intel_bo *load, bool write)
+{
+	struct intel_batchbuffer *batch;
+	int addr_size_dw;
+	uint32_t regOffset;
+
+	check_gen_8(fd);
+
+	addr_size_dw = bb_address_size_dw(fd);
+	regOffset = get_register_offset(ringid);
+	batch = intel_batchbuffer_alloc(bufmgr, intel_get_drm_devid(fd));
+	igt_assert(batch);
+
+	BEGIN_BATCH(6, 2);
+	/* store current reported timestamp in DW0 */
+	OUT_BATCH(MI_STORE_REGISTER_MEM(addr_size_dw + 2));
+	OUT_BATCH(regOffset + TIMESTAMP_offset);
+	OUT_RELOC(dest, I915_GEM_DOMAIN_INSTRUCTION, I915_GEM_DOMAIN_INSTRUCTION, DWORDS_TO_BYTES(0));
+
+	/* store current context timestamp in DW1 */
+	OUT_BATCH(MI_STORE_REGISTER_MEM(addr_size_dw + 2));
+	OUT_BATCH(regOffset + CTX_TIMESTAMP_offset);
+	OUT_RELOC(dest, I915_GEM_DOMAIN_INSTRUCTION, I915_GEM_DOMAIN_INSTRUCTION, DWORDS_TO_BYTES(1));
+
+	ADVANCE_BATCH();
+
+	if(load != NULL) {
+		if(write) {
+			BEGIN_BATCH(3, 1);
+			OUT_BATCH(MI_STORE_REGISTER_MEM(addr_size_dw + 2));
+			OUT_BATCH(regOffset + TIMESTAMP_offset);
+			OUT_RELOC(load, I915_GEM_DOMAIN_INSTRUCTION, I915_GEM_DOMAIN_INSTRUCTION, DWORDS_TO_BYTES(0));
+			ADVANCE_BATCH();
+		}
+		else {
+			BEGIN_BATCH(3, 2);
+			OUT_BATCH(MI_COPY_MEM_MEM);
+			OUT_RELOC(dest, I915_GEM_DOMAIN_INSTRUCTION, I915_GEM_DOMAIN_INSTRUCTION, DWORDS_TO_BYTES(2));
+			OUT_RELOC(load, I915_GEM_DOMAIN_INSTRUCTION, 0, DWORDS_TO_BYTES(0));
+			ADVANCE_BATCH();
+		}
+	}
+
+	BEGIN_BATCH(1, 0);
+	OUT_BATCH(MI_BATCH_BUFFER_END);
+	ADVANCE_BATCH();
+
+	return batch;
+}
+
+/**
+ * igt_create_noop_bb:
+ * @fd: file descriptor for i915 driver instance
+ * @bufmgr: Buffer manager to be used for creation of batch buffers
+ * ringid: Ring to create batch buffer for. e.g. I915_EXEC_RENDER
+ * noops: Number of MI_NOOP instructions to add to the batch buffer.
+ *
+ * This creates a batch buffer with a specified number of MI_NOOP instructions.
+ *
+ * Returns:
+ * The struct intel_batchbuffer created.
+ */
+struct intel_batchbuffer *igt_create_noop_bb(int fd, drm_intel_bufmgr *bufmgr,
+		int ringid, int noops)
+{
+	struct intel_batchbuffer *batch;
+	int loop;
+
+	batch = intel_batchbuffer_alloc(bufmgr, intel_get_drm_devid(fd));
+	igt_assert(batch);
+
+	BEGIN_BATCH(noops + 1, 0);
+	for(loop = 0; loop < noops; loop++)
+		OUT_BATCH(MI_NOOP);
+	OUT_BATCH(MI_BATCH_BUFFER_END);
+	ADVANCE_BATCH();
+
+	return batch;
+}
+
+/* Store calibrated values so they only need calculating once.
+ * I915_EXEC_RING_MASK allows 3 bits for ring ids so allow for storing 8 values */
+static uint32_t calibrated_ring_value[8] = {0, 0, 0, 0, 0, 0, 0, 0};
+
+/**
+ * igt_calibrate_delay_bb:
+ * @fd: file descriptor for i915 driver instance
+ * @bufmgr: Buffer manager to be used for creation of batch buffers
+ * ringid: Ring to calibrate. e.g. I915_EXEC_RENDER
+ *
+ * This calculates the value of loops that would need to be passed to
+ * igt_create_delay_bb() to create a delay of about 1 second on the specified
+ * ring.
+ *
+ * Returns:
+ * uint32_t to be passed to igt_create_delay_bb().
+ */
+#define CAL_SEED (0x100000)
+uint32_t igt_calibrate_delay_bb(int fd, drm_intel_bufmgr *bufmgr, int ringid)
+{
+	uint32_t *buf;
+	struct intel_batchbuffer *bb;
+	struct timespec start, end;
+	uint64_t duration;
+	uint64_t calibrated;
+	drm_intel_bo *target_bo;
+
+	igt_assert(ringid < 8);
+	if(calibrated_ring_value[ringid] != 0)
+		return calibrated_ring_value[ringid];
+
+	target_bo = drm_intel_bo_alloc(bufmgr, "target bo", BATCH_SZ, BATCH_SZ);
+	igt_assert(target_bo);
+
+	/* Put some non zero values in the target bo */
+	drm_intel_bo_map(target_bo, 1);
+	buf = target_bo->virtual;
+	buf[0] = 0xff;
+	drm_intel_bo_unmap(target_bo);
+
+	bb = igt_create_delay_bb(fd, bufmgr, ringid, CAL_SEED, target_bo);
+
+	gem_quiescent_gpu(fd);
+	clock_gettime(CLOCK_MONOTONIC, &start);
+	intel_batchbuffer_flush_on_ring(bb, ringid);
+	/* This will not return until the bo has finished executing */
+	drm_intel_bo_map(target_bo, 0);
+	clock_gettime(CLOCK_MONOTONIC, &end);
+
+	buf = target_bo->virtual;
+	/* buf[0] in the target buffer should be 0 if the batch buffer completed */
+	igt_assert_f(buf[0] == 0, "buf[0] expected 0x0, got 0x%x\n", buf[0]);
+
+	duration = ((((uint64_t)end.tv_sec - (uint64_t)start.tv_sec) * SEC_TO_NSEC)
+	           + (uint64_t)end.tv_nsec) - (uint64_t)start.tv_nsec;
+
+	calibrated = (((uint64_t)(CAL_SEED) * SEC_TO_NSEC) / duration);
+	igt_debug("Uncalibrated run took %" PRIu64 ".%04" PRIu64 "s\n",
+	          duration / SEC_TO_NSEC,
+	          (duration % SEC_TO_NSEC) / 100000);
+	drm_intel_bo_unreference(target_bo);
+	intel_batchbuffer_free(bb);
+
+	/* Sanity check. If duration < 100ms, something has clearly gone wrong
+	 * */
+	igt_assert(duration > (SEC_TO_NSEC  / 10));
+
+	igt_assert_f(calibrated <= UINT32_MAX, "Calibrated value > UINT32_MAX\n");
+
+	calibrated_ring_value[ringid] = (uint32_t)calibrated;
+	return (uint32_t)calibrated;
+}
+
+/**
+ * igt_compare_timestamps:
+ * @ts1: timestamp 1
+ * @ts2: timestamp 2
+ *
+ * This compares two uint32_t timestamps. To handle wrapping it assumes the
+ * difference between the two timestamps is less than 1/4 the max elapsed time
+ * represented by the counters.
+ * It also assumes the timestamps are samples from the same counter.
+ *
+ * Returns:
+ * True if ts2 > ts1, allowing for counter wrapping, false otherwise.
+ */
+
+bool igt_compare_timestamps(uint32_t ts1, uint32_t ts2)
+{
+	if (ts2 > ts1)
+		return true;
+	else if ((ts1 > 0x80000000) && (ts2 < 0x40000000))
+		return true; /* Assuming timestamp counter wrapped */
+	else
+		return false;
+}
lib/igt_bb_factory.h new file +47 -0
new file mode 100644
index 0000000..3ab7f13
@@ -0,0 +1,47 @@
+/*
+ * Copyright © 2016 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ * Authors:
+ *    Derek Morton <[email protected]>
+ *
+ */
+
+#ifndef IGT_BB_FACTORY_H
+#define IGT_BB_FACTORY_H
+
+#include "intel_batchbuffer.h"
+#include <stdint.h>
+
+struct intel_batchbuffer *igt_create_delay_bb(int fd, drm_intel_bufmgr *bufmgr,
+		int ringid, uint32_t loops, drm_intel_bo *dest);
+
+struct intel_batchbuffer *igt_create_timestamp_bb(int fd, drm_intel_bufmgr *bufmgr,
+		int ringid, drm_intel_bo *dest, drm_intel_bo *load, bool write);
+
+struct intel_batchbuffer *igt_create_noop_bb(int fd, drm_intel_bufmgr *bufmgr,
+		int ringid, int noops);
+
+uint32_t igt_calibrate_delay_bb(int fd, drm_intel_bufmgr *bufmgr, int ringid);
+
+bool igt_compare_timestamps(uint32_t ts1, uint32_t ts2);
+
+#endif /* IGT_BB_FACTORY_H */
Signature · 1 line
1.9.1
Signature · 7 lines
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#3 lore raw

Re: [PATCH i-g-t 1/4] lib/igt_bb_factory: Add igt_bb_factory library

In reply to Derek Morton
Quoted 131 lines · Derek Morton

Adds functions to create a number of different batch buffers to perform several functions including:
Batch buffer which will run for a long duration to provide a delay on a specified ring.
Function to calibrate the delay batch buffer to run for a specified period of time.
Function to create a batch buffer which writes timestamps to a buffer object. Function to compare timestamps allowing for wrapping of the values.

Intended for use by the gem_scheduler test initially but will be used by other tests in development.

---
  lib/Makefile.sources |   2 +
  lib/igt.h            |   1 +
  lib/igt_bb_factory.c | 401 +++++++++++++++++++++++++++++++++++++++++++++++++++
  lib/igt_bb_factory.h |  47 ++++++
  4 files changed, 451 insertions(+)

create mode 100644 lib/igt_bb_factory.c
create mode 100644 lib/igt_bb_factory.h

lib/Makefile.sources +2 -0
index 4999868..c560b3e 100644
@@ -7,6 +7,8 @@ libintel_tools_la_SOURCES = 	\
  	i915_reg.h		\
  	i915_pciids.h		\
  	igt.h			\
+	igt_bb_factory.c	\
+	igt_bb_factory.h	\
  	igt_debugfs.c		\
  	igt_debugfs.h		\
  	igt_aux.c		\
lib/igt.h +1 -0
index 3be2551..0f29420 100644
@@ -36,6 +36,7 @@
  #include "igt_gt.h"
  #include "igt_kms.h"
  #include "igt_stats.h"
+#include "igt_bb_factory.h"
  #include "instdone.h"
  #include "intel_batchbuffer.h"
  #include "intel_chipset.h"
lib/igt_bb_factory.c new file +78 -0
new file mode 100644
index 0000000..eea63c6
@@ -0,0 +1,401 @@
+/*
+ * Copyright © 2016 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ * Authors:
+ *    Derek Morton <[email protected]>
+ *
+ */
+
+#include "igt.h"
+#include "intel_batchbuffer.h"
+#include <stdint.h>
+#include <inttypes.h>
+#include <time.h>
+
+#define SEC_TO_NSEC (1000 * 1000 * 1000)
+#define DWORDS_TO_BYTES(x) ((x)*4)
+
+#define MI_STORE_REGISTER_MEM(LENGTH)   ((0x024 << 23) | ((LENGTH - 2) & 0xff))
+#define MI_MATH(NrInst)                 ((0x01A << 23) | ((NrInst - 1) & 0x3f))
+#define MI_CONDITIONAL_BATCH_BUFFER_END ((0x036 << 23) | (1 << 21) | 2)
+#define MI_COPY_MEM_MEM                 ((0x02E << 23) | (3))
+
+#define ALU_LOAD(TO, FROM)  ((0x080 << 20) | ((TO) << 10) | (FROM))
+#define ALU_SUB             ( 0x101 << 20)
+#define ALU_STORE(TO, FROM) ((0x180 << 20) | ((TO) << 10) | (FROM))
+
+#define TIMESTAMP_offset      (0x358) /* Elapsed time from system start */
+#define CTX_TIMESTAMP_offset  (0x3A8) /* Elapsed Time from context creation */
+#define ALU_GPU_R0_LSB_offset (0x600)
+#define ALU_GPU_R0_MSB_offset (0x604)
+#define ALU_GPU_R1_LSB_offset (0x608)
+#define ALU_GPU_R1_MSB_offset (0x60C)
+#define ALU_GPU_R2_LSB_offset (0x610)
+#define ALU_GPU_R2_MSB_offset (0x614)
+
+#define ALU_R0_ENCODING   (0x00)
+#define ALU_R1_ENCODING   (0x01)
+#define ALU_SRCA_ENCODING (0x20)
+#define ALU_SRCB_ENCODING (0x21)
+#define ALU_ACCU_ENCODING (0x31)
+
+/**
+ * SECTION:igt_bb_factory
+ * @short_description: Utility functions for creating batch buffers
+ * @title: Batch Buffer Factory
+ * @include: igt.h
+ *
+ * This library implements functions for creating batch buffers which may be
+ * useful to multiple tests.
+ */
+
+static void check_gen_8(int fd)
+{
+	static bool checked = false;
+	if(!checked) {
+		igt_require(intel_gen(intel_get_drm_devid(fd)) >= 8);
+		checked = true;
+	}
+}

lib/igt_bb_factory.c line 88

Quoted 10 lines
lib/igt_bb_factory.c new file +10 -0
+
+static int bb_address_size_dw(int fd)
+{
+	if (intel_gen(intel_get_drm_devid(fd)) >= 8)
+		return 2;
+	else
+		return 1;
+}
+
+static uint32_t get_register_offset(int ringid)

register_offset feels a bit confusing as name, I suggest to use mmio_base instead

lib/igt_bb_factory.c line 94

Quoted 6 lines
lib/igt_bb_factory.c new file +6 -0
+{
+	switch (ringid) {
+	case I915_EXEC_RENDER:
+		return 0x02000;
+	case I915_EXEC_BSD:
+		return 0x12000;

What about the BSD2?

Quoted 21 lines
lib/igt_bb_factory.c new file +21 -0
+	case I915_EXEC_BLT:
+		return 0x22000;
+	case I915_EXEC_VEBOX:
+		return 0x1A000;
+	default:
+		igt_assert_f(0, "Invalid ringid %d passed to get_register_offset()\n", ringid);
+	}
+}
+
+/**
+ * igt_create_delay_bb:
+ * @fd: file descriptor for i915 driver instance
+ * @bufmgr: Buffer manager to be used for creation of batch buffers
+ * ringid: Ring to create batch buffer for. e.g. I915_EXEC_RENDER
+ * loops: Number of times to loop
+ * dest: Buffer to use for saving the current loop count and timestamp.
+ *
+ * This creates a batch buffer which will iterate a loop a specified number
+ * of times. Intended for creating batch buffers which take an arbitarily
+ * long time to execute. This can be useful to keep a ring busy while
+ * constructing a test scenario.

lib/igt_bb_factory.c line 125

Quoted 10 lines
lib/igt_bb_factory.c new file +10 -0
+ *
+ * The dest buffer will have a number of Dwords written by the batch buffer
+ * when it runs. They are:
+ * DW0 & DW1 - These are loade with the value of 'loops' and are decremented
+ *             as the batch buffer executes. They will be 0 after the batch
+ *             buffer completes if it finished succesfully.
+ * DW2 Timestamp - An indication of when the batch buffer ran allowing a
+ *                 comparison between batch buffers to show execution order.
+ *                 May wrap so igt_compare_timestamps() should be used to
+ *                 compare timestamps.

If I recall correctly the lower dword of the timestamp wraps in minutes, which is safe enough for normal tests but might be an issue on very long stress tests. Maybe add a comment to clarify when this is safe to use, also considering that due to the wrapping the actual supported maximum time difference between 2 timestamps is less than the total wrapping time

lib/igt_bb_factory.c line 131

Quoted 6 lines
lib/igt_bb_factory.c new file +6 -0
+ *
+ * Returns:
+ * The struct intel_batchbuffer created.
+ */
+struct intel_batchbuffer *igt_create_delay_bb(int fd, drm_intel_bufmgr *bufmgr,
+		int ringid, uint32_t loops, drm_intel_bo *dest)

Other batch-creating functions take the batch as a parameter instead of returning one (e.g. igt_blitter_fast_copy, rendercopy), so for consistency I would do the same here and in the other functions that you've added

lib/igt_bb_factory.c line 137

Quoted 6 lines
lib/igt_bb_factory.c new file +6 -0
+{
+	struct intel_batchbuffer *batch;
+	int addr_size_dw;
+	uint32_t regOffset;
+
+	check_gen_8(fd);

HSW RCS does support this, so maybe we could have something like:

static void has_delay_bb(int fd, int ringid){
    static bool checked = false;
    if (!checked) {
        int devid = intel_get_drm_devid(fd);
        igt_require(intel_gen(devid) >= 8 ||
                        (IS_HASWELL(devid) && ringid == I915_EXEC_RENDER));
        checked = true;
    }
}

The batch manipulation macros should adjust the number of dwords for addresses automatically

lib/igt_bb_factory.c line 140

Quoted 3 lines
lib/igt_bb_factory.c new file +3 -0
+
+	addr_size_dw = bb_address_size_dw(fd);
+	regOffset = get_register_offset(ringid);

Similarly to above, I would rename regOffset to mmio_base

Quoted 13 lines
lib/igt_bb_factory.c new file +13 -0
+	batch = intel_batchbuffer_alloc(bufmgr, intel_get_drm_devid(fd));
+	igt_assert(batch);
+
+	BEGIN_BATCH(32, 5);
+	/* store current timestamp in DW2 */
+	OUT_BATCH(MI_STORE_REGISTER_MEM(addr_size_dw + 2));
+	OUT_BATCH(regOffset + TIMESTAMP_offset);
+	OUT_RELOC(dest, I915_GEM_DOMAIN_INSTRUCTION, I915_GEM_DOMAIN_INSTRUCTION, DWORDS_TO_BYTES(2));
+
+	/* Load R0 with loops */
+	OUT_BATCH(MI_LOAD_REGISTER_IMM);
+	OUT_BATCH(regOffset + ALU_GPU_R0_LSB_offset);
+	OUT_BATCH(loops);

lib/igt_bb_factory.c line 163

Quoted 10 lines
lib/igt_bb_factory.c new file +10 -0
+	OUT_BATCH(MI_LOAD_REGISTER_IMM);
+	OUT_BATCH(regOffset + ALU_GPU_R0_MSB_offset);
+	OUT_BATCH(0x00000000);
+	/* Load R1 with 1 */
+	OUT_BATCH(MI_LOAD_REGISTER_IMM);
+	OUT_BATCH(regOffset + ALU_GPU_R1_LSB_offset);
+	OUT_BATCH(0x00000001);
+	OUT_BATCH(MI_LOAD_REGISTER_IMM);
+	OUT_BATCH(regOffset + ALU_GPU_R1_MSB_offset);
+	OUT_BATCH(0x00000000);

instead of emitting 4 MI_LOAD_REGISTER_IMM you can use 1 and specify extra dword lenght

Quoted 16 lines
lib/igt_bb_factory.c new file +16 -0
+	/* Copy R0 / R1 into SRCA / SRCB, Perform R0 - R1, Store result in R0 */
+	/* e.g. R0 -= 1 */
+	OUT_BATCH(MI_MATH(4));
+	OUT_BATCH(ALU_LOAD(ALU_SRCA_ENCODING, ALU_R0_ENCODING));
+	OUT_BATCH(ALU_LOAD(ALU_SRCB_ENCODING, ALU_R1_ENCODING));
+	OUT_BATCH(ALU_SUB);
+	OUT_BATCH(ALU_STORE(ALU_R0_ENCODING, ALU_ACCU_ENCODING));
+	/* Copy R0 to dest
+	 * On Gen8 MI_CONDITIONAL_BATCH_BUFFER_END BSD ring Compare address
+	 * points to 2 Dwords, a mask (DW0) and data (DW1) which are ANDed
+	 * together.
+	 * On Gen9+, and the other rings on Gen8 Compare address points to
+	 * just Data (DW0). For simplicity always copy R0 LSB to DW0 and DW1.
+	 */
+	OUT_BATCH(MI_STORE_REGISTER_MEM(addr_size_dw + 2));
+	OUT_BATCH(regOffset + ALU_GPU_R0_LSB_offset);

lib/igt_bb_factory.c line 189

Quoted 10 lines
lib/igt_bb_factory.c new file +10 -0
+	OUT_RELOC(dest, I915_GEM_DOMAIN_INSTRUCTION, I915_GEM_DOMAIN_INSTRUCTION, 0);
+	OUT_BATCH(MI_STORE_REGISTER_MEM(addr_size_dw + 2));
+	OUT_BATCH(regOffset + ALU_GPU_R0_LSB_offset);
+	OUT_RELOC(dest, I915_GEM_DOMAIN_INSTRUCTION, I915_GEM_DOMAIN_INSTRUCTION, DWORDS_TO_BYTES(1));
+	/* Repeat until R0 == 0 */
+	OUT_BATCH(MI_CONDITIONAL_BATCH_BUFFER_END);
+	OUT_BATCH(0x00000000);
+	OUT_RELOC(dest, I915_GEM_DOMAIN_INSTRUCTION, I915_GEM_DOMAIN_INSTRUCTION, 0);
+	OUT_BATCH(MI_BATCH_BUFFER_START | (addr_size_dw - 1));
+	OUT_RELOC(batch->bo, I915_GEM_DOMAIN_INSTRUCTION, 0, DWORDS_TO_BYTES(15));

Instead of using the hardcoded DWORDS_TO_BYTES(15) you could capture batch->ptr before emitting the dword you want to jump to and pass it here

Quoted 8 lines
lib/igt_bb_factory.c new file +8 -0
+	/* Should never get here, but end if it happens */
+
+	OUT_BATCH(MI_BATCH_BUFFER_END);
+	ADVANCE_BATCH();
+
+	return batch;
+}
+

lib/igt_bb_factory.c line 207

Quoted 10 lines
lib/igt_bb_factory.c new file +10 -0
+/**
+ * igt_create_timestamp_bb:
+ * @fd: file descriptor for i915 driver instance
+ * @bufmgr: Buffer manager to be used for creation of batch buffers
+ * ringid: Ring to create batch buffer for. e.g. I915_EXEC_RENDER
+ * dest: Buffer to use for saving the timestamps.
+ * load: Buffer to access. Set NULL if not required.
+ * write: If true and load is not NULL, will also write a timestamp to load
+ * buffer. If false and load is not NULL, will read from load buffer into dest.
+ * Intended for dependency checking.

The "load" buffer handling feels a bit too scheduler-specific to be in a common library. I would move it to the scheduler tests and maybe leave here an emit_timestamp_capture() or something like that.

Quoted 15 lines
lib/igt_bb_factory.c new file +15 -0
+ *
+ * This creates a batch buffer which writes timestamps into a buffer object.
+ * If 'load' is non null, data is either written to 'load' or copied from 'load'
+ * depending on whether 'write' is set.
+ *
+ * The dest buffer will have a number of Dwords written by the batch buffer
+ * when it runs. They are:
+ * DW0 Reported timestamp - An indication of when the batch buffer ran allowing a
+ *                          comparison between batch buffers to show execution order.
+ *                          May wrap so igt_compare_timestamps() should be used to
+ *                          compare timestamps.
+ * DW1 Context timestamp - Elapsed time since context was created.
+ * DW2 Value copied from DW0 of load if write == false
+ *
+ * Returns:

lib/igt_bb_factory.c line 232

Quoted 10 lines
lib/igt_bb_factory.c new file +10 -0
+ * The struct intel_batchbuffer created.
+ */
+struct intel_batchbuffer *igt_create_timestamp_bb(int fd, drm_intel_bufmgr *bufmgr,
+		int ringid, drm_intel_bo *dest, drm_intel_bo *load, bool write)
+{
+	struct intel_batchbuffer *batch;
+	int addr_size_dw;
+	uint32_t regOffset;
+
+	check_gen_8(fd);

The TIMESTAMP reg exists also on pre GEN8, so instead of skipping on those platform we could capture only that register and not the CTX_TIMESTAMP one.

Quoted 81 lines
lib/igt_bb_factory.c new file +81 -0
+
+	addr_size_dw = bb_address_size_dw(fd);
+	regOffset = get_register_offset(ringid);
+	batch = intel_batchbuffer_alloc(bufmgr, intel_get_drm_devid(fd));
+	igt_assert(batch);
+
+	BEGIN_BATCH(6, 2);
+	/* store current reported timestamp in DW0 */
+	OUT_BATCH(MI_STORE_REGISTER_MEM(addr_size_dw + 2));
+	OUT_BATCH(regOffset + TIMESTAMP_offset);
+	OUT_RELOC(dest, I915_GEM_DOMAIN_INSTRUCTION, I915_GEM_DOMAIN_INSTRUCTION, DWORDS_TO_BYTES(0));
+
+	/* store current context timestamp in DW1 */
+	OUT_BATCH(MI_STORE_REGISTER_MEM(addr_size_dw + 2));
+	OUT_BATCH(regOffset + CTX_TIMESTAMP_offset);
+	OUT_RELOC(dest, I915_GEM_DOMAIN_INSTRUCTION, I915_GEM_DOMAIN_INSTRUCTION, DWORDS_TO_BYTES(1));
+
+	ADVANCE_BATCH();
+
+	if(load != NULL) {
+		if(write) {
+			BEGIN_BATCH(3, 1);
+			OUT_BATCH(MI_STORE_REGISTER_MEM(addr_size_dw + 2));
+			OUT_BATCH(regOffset + TIMESTAMP_offset);
+			OUT_RELOC(load, I915_GEM_DOMAIN_INSTRUCTION, I915_GEM_DOMAIN_INSTRUCTION, DWORDS_TO_BYTES(0));
+			ADVANCE_BATCH();
+		}
+		else {
+			BEGIN_BATCH(3, 2);
+			OUT_BATCH(MI_COPY_MEM_MEM);
+			OUT_RELOC(dest, I915_GEM_DOMAIN_INSTRUCTION, I915_GEM_DOMAIN_INSTRUCTION, DWORDS_TO_BYTES(2));
+			OUT_RELOC(load, I915_GEM_DOMAIN_INSTRUCTION, 0, DWORDS_TO_BYTES(0));
+			ADVANCE_BATCH();
+		}
+	}
+
+	BEGIN_BATCH(1, 0);
+	OUT_BATCH(MI_BATCH_BUFFER_END);
+	ADVANCE_BATCH();
+
+	return batch;
+}
+
+/**
+ * igt_create_noop_bb:
+ * @fd: file descriptor for i915 driver instance
+ * @bufmgr: Buffer manager to be used for creation of batch buffers
+ * ringid: Ring to create batch buffer for. e.g. I915_EXEC_RENDER
+ * noops: Number of MI_NOOP instructions to add to the batch buffer.
+ *
+ * This creates a batch buffer with a specified number of MI_NOOP instructions.
+ *
+ * Returns:
+ * The struct intel_batchbuffer created.
+ */
+struct intel_batchbuffer *igt_create_noop_bb(int fd, drm_intel_bufmgr *bufmgr,
+		int ringid, int noops)
+{
+	struct intel_batchbuffer *batch;
+	int loop;
+
+	batch = intel_batchbuffer_alloc(bufmgr, intel_get_drm_devid(fd));
+	igt_assert(batch);
+
+	BEGIN_BATCH(noops + 1, 0);
+	for(loop = 0; loop < noops; loop++)
+		OUT_BATCH(MI_NOOP);
+	OUT_BATCH(MI_BATCH_BUFFER_END);
+	ADVANCE_BATCH();
+
+	return batch;
+}
+
+/* Store calibrated values so they only need calculating once.
+ * I915_EXEC_RING_MASK allows 3 bits for ring ids so allow for storing 8 values */
+static uint32_t calibrated_ring_value[8] = {0, 0, 0, 0, 0, 0, 0, 0};
+
+/**
+ * igt_calibrate_delay_bb:
+ * @fd: file descriptor for i915 driver instance
+ * @bufmgr: Buffer manager to be used for creation of batch buffers

lib/igt_bb_factory.c line 323

Quoted 10 lines
lib/igt_bb_factory.c new file +10 -0
+ * ringid: Ring to calibrate. e.g. I915_EXEC_RENDER
+ *
+ * This calculates the value of loops that would need to be passed to
+ * igt_create_delay_bb() to create a delay of about 1 second on the specified
+ * ring.
+ *
+ * Returns:
+ * uint32_t to be passed to igt_create_delay_bb().
+ */
+#define CAL_SEED (0x100000)

Can you add a comment regarding how this seed was picked? something like the expected duration of the execution with this seed on a specific platform would be nice.

Quoted 8 lines
lib/igt_bb_factory.c new file +8 -0
+uint32_t igt_calibrate_delay_bb(int fd, drm_intel_bufmgr *bufmgr, int ringid)
+{
+	uint32_t *buf;
+	struct intel_batchbuffer *bb;
+	struct timespec start, end;
+	uint64_t duration;
+	uint64_t calibrated;
+	drm_intel_bo *target_bo;

lib/igt_bb_factory.c line 341

Quoted 10 lines
lib/igt_bb_factory.c new file +10 -0
+
+	igt_assert(ringid < 8);
+	if(calibrated_ring_value[ringid] != 0)
+		return calibrated_ring_value[ringid];
+
+	target_bo = drm_intel_bo_alloc(bufmgr, "target bo", BATCH_SZ, BATCH_SZ);
+	igt_assert(target_bo);
+
+	/* Put some non zero values in the target bo */
+	drm_intel_bo_map(target_bo, 1);

Missing return code check here. Also, instead of mapping and unmapping a single subdata call would in my opinion be cleaner to write a single dword.

lib/igt_bb_factory.c line 352

Quoted 11 lines
lib/igt_bb_factory.c new file +11 -0
+	buf = target_bo->virtual;
+	buf[0] = 0xff;
+	drm_intel_bo_unmap(target_bo);
+
+	bb = igt_create_delay_bb(fd, bufmgr, ringid, CAL_SEED, target_bo);
+
+	gem_quiescent_gpu(fd);
+	clock_gettime(CLOCK_MONOTONIC, &start);
+	intel_batchbuffer_flush_on_ring(bb, ringid);
+	/* This will not return until the bo has finished executing */
+	drm_intel_bo_map(target_bo, 0);

Missing return code check and unmap. Maybe using drm_intel_bo_wait_for_rendering here and get_subdata below could be slightly neater

Quoted 8 lines
lib/igt_bb_factory.c new file +8 -0
+	clock_gettime(CLOCK_MONOTONIC, &end);
+
+	buf = target_bo->virtual;
+	/* buf[0] in the target buffer should be 0 if the batch buffer completed */
+	igt_assert_f(buf[0] == 0, "buf[0] expected 0x0, got 0x%x\n", buf[0]);
+
+	duration = ((((uint64_t)end.tv_sec - (uint64_t)start.tv_sec) * SEC_TO_NSEC)
+	           + (uint64_t)end.tv_nsec) - (uint64_t)start.tv_nsec;

lib/igt_bb_factory.c line 370

Quoted 10 lines
lib/igt_bb_factory.c new file +10 -0
+
+	calibrated = (((uint64_t)(CAL_SEED) * SEC_TO_NSEC) / duration);
+	igt_debug("Uncalibrated run took %" PRIu64 ".%04" PRIu64 "s\n",
+	          duration / SEC_TO_NSEC,
+	          (duration % SEC_TO_NSEC) / 100000);
+	drm_intel_bo_unreference(target_bo);
+	intel_batchbuffer_free(bb);
+
+	/* Sanity check. If duration < 100ms, something has clearly gone wrong
+	 * */

Without any details on the expected duration when using CAL_SEED this comment is not very clear

Quoted 74 lines
lib/igt_bb_factory.c new file +31 -0
+	igt_assert(duration > (SEC_TO_NSEC  / 10));
+
+	igt_assert_f(calibrated <= UINT32_MAX, "Calibrated value > UINT32_MAX\n");
+
+	calibrated_ring_value[ringid] = (uint32_t)calibrated;
+	return (uint32_t)calibrated;
+}
+
+/**
+ * igt_compare_timestamps:
+ * @ts1: timestamp 1
+ * @ts2: timestamp 2
+ *
+ * This compares two uint32_t timestamps. To handle wrapping it assumes the
+ * difference between the two timestamps is less than 1/4 the max elapsed time
+ * represented by the counters.
+ * It also assumes the timestamps are samples from the same counter.
+ *
+ * Returns:
+ * True if ts2 > ts1, allowing for counter wrapping, false otherwise.
+ */
+
+bool igt_compare_timestamps(uint32_t ts1, uint32_t ts2)
+{
+	if (ts2 > ts1)
+		return true;
+	else if ((ts1 > 0x80000000) && (ts2 < 0x40000000))
+		return true; /* Assuming timestamp counter wrapped */
+	else
+		return false;
+}
lib/igt_bb_factory.h new file +37 -0
new file mode 100644
index 0000000..3ab7f13
@@ -0,0 +1,47 @@
+/*
+ * Copyright © 2016 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ * Authors:
+ *    Derek Morton <[email protected]>
+ *
+ */
+
+#ifndef IGT_BB_FACTORY_H
+#define IGT_BB_FACTORY_H
+
+#include "intel_batchbuffer.h"
+#include <stdint.h>
+
+struct intel_batchbuffer *igt_create_delay_bb(int fd, drm_intel_bufmgr *bufmgr,
+		int ringid, uint32_t loops, drm_intel_bo *dest);
+
+struct intel_batchbuffer *igt_create_timestamp_bb(int fd, drm_intel_bufmgr *bufmgr,

lib/igt_bb_factory.h line 47

Quoted 10 lines
lib/igt_bb_factory.h new file +10 -0
+		int ringid, drm_intel_bo *dest, drm_intel_bo *load, bool write);
+
+struct intel_batchbuffer *igt_create_noop_bb(int fd, drm_intel_bufmgr *bufmgr,
+		int ringid, int noops);
+
+uint32_t igt_calibrate_delay_bb(int fd, drm_intel_bufmgr *bufmgr, int ringid);
+
+bool igt_compare_timestamps(uint32_t ts1, uint32_t ts2);
+
+#endif /* IGT_BB_FACTORY_H */

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#4 lore raw

Re: [PATCH i-g-t 1/4] lib/igt_bb_factory: Add igt_bb_factory library

Quoted 155 lines

-----Original Message-----
From: Ceraolo Spurio, Daniele
Sent: Wednesday, February 17, 2016 9:48 AM
To: Morton, Derek J <[email protected]>; [email protected]
Subject: Re: [Intel-gfx] [PATCH i-g-t 1/4] lib/igt_bb_factory: Add igt_bb_factory library

Quoted 144 lines · Derek Morton

Adds functions to create a number of different batch buffers to perform several functions including:
Batch buffer which will run for a long duration to provide a delay on a specified ring.
Function to calibrate the delay batch buffer to run for a specified period of time.
Function to create a batch buffer which writes timestamps to a buffer object. Function to compare timestamps allowing for wrapping of the values.

Intended for use by the gem_scheduler test initially but will be used by other tests in development.

---
  lib/Makefile.sources |   2 +
  lib/igt.h            |   1 +
  lib/igt_bb_factory.c | 401 +++++++++++++++++++++++++++++++++++++++++++++++++++
  lib/igt_bb_factory.h |  47 ++++++
  4 files changed, 451 insertions(+)

create mode 100644 lib/igt_bb_factory.c
create mode 100644 lib/igt_bb_factory.h

lib/Makefile.sources index renamed from lib/Makefile.sources +0 -0

4999868..c560b3e 100644

lib/Makefile.sources +2 -0
@@ -7,6 +7,8 @@ libintel_tools_la_SOURCES = 	\
  	i915_reg.h		\
  	i915_pciids.h		\
  	igt.h			\
+	igt_bb_factory.c	\
+	igt_bb_factory.h	\
  	igt_debugfs.c		\
  	igt_debugfs.h		\
  	igt_aux.c		\
lib/igt.h +1 -0
index 3be2551..0f29420 100644
@@ -36,6 +36,7 @@
  #include "igt_gt.h"
  #include "igt_kms.h"
  #include "igt_stats.h"
+#include "igt_bb_factory.h"
  #include "instdone.h"
  #include "intel_batchbuffer.h"
  #include "intel_chipset.h"
lib/igt_bb_factory.c new file mode renamed from lib/igt_bb_factory.c +0 -0

100644 index 0000000..eea63c6

lib/igt_bb_factory.c new file +92 -0
@@ -0,0 +1,401 @@
+/*
+ * Copyright © 2016 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person 
+obtaining a
+ * copy of this software and associated documentation files (the 
+"Software"),
+ * to deal in the Software without restriction, including without 
+limitation
+ * the rights to use, copy, modify, merge, publish, distribute, 
+sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom 
+the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including 
+the next
+ * paragraph) shall be included in all copies or substantial portions 
+of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 
+EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF 
+MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT 
+SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES 
+OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, 
+ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 
+OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ * Authors:
+ *    Derek Morton <[email protected]>
+ *
+ */
+
+#include "igt.h"
+#include "intel_batchbuffer.h"
+#include <stdint.h>
+#include <inttypes.h>
+#include <time.h>
+
+#define SEC_TO_NSEC (1000 * 1000 * 1000) #define DWORDS_TO_BYTES(x) 
+((x)*4)
+
+#define MI_STORE_REGISTER_MEM(LENGTH)   ((0x024 << 23) | ((LENGTH - 2) & 0xff))
+#define MI_MATH(NrInst)                 ((0x01A << 23) | ((NrInst - 1) & 0x3f))
+#define MI_CONDITIONAL_BATCH_BUFFER_END ((0x036 << 23) | (1 << 21) | 2)
+#define MI_COPY_MEM_MEM                 ((0x02E << 23) | (3))
+
+#define ALU_LOAD(TO, FROM)  ((0x080 << 20) | ((TO) << 10) | (FROM))
+#define ALU_SUB             ( 0x101 << 20)
+#define ALU_STORE(TO, FROM) ((0x180 << 20) | ((TO) << 10) | (FROM))
+
+#define TIMESTAMP_offset      (0x358) /* Elapsed time from system start */
+#define CTX_TIMESTAMP_offset  (0x3A8) /* Elapsed Time from context 
+creation */ #define ALU_GPU_R0_LSB_offset (0x600) #define 
+ALU_GPU_R0_MSB_offset (0x604) #define ALU_GPU_R1_LSB_offset (0x608) 
+#define ALU_GPU_R1_MSB_offset (0x60C) #define ALU_GPU_R2_LSB_offset 
+(0x610) #define ALU_GPU_R2_MSB_offset (0x614)
+
+#define ALU_R0_ENCODING   (0x00)
+#define ALU_R1_ENCODING   (0x01)
+#define ALU_SRCA_ENCODING (0x20)
+#define ALU_SRCB_ENCODING (0x21)
+#define ALU_ACCU_ENCODING (0x31)
+
+/**
+ * SECTION:igt_bb_factory
+ * @short_description: Utility functions for creating batch buffers
+ * @title: Batch Buffer Factory
+ * @include: igt.h
+ *
+ * This library implements functions for creating batch buffers which 
+may be
+ * useful to multiple tests.
+ */
+
+static void check_gen_8(int fd)
+{
+	static bool checked = false;
+	if(!checked) {
+		igt_require(intel_gen(intel_get_drm_devid(fd)) >= 8);
+		checked = true;
+	}
+}
+
+static int bb_address_size_dw(int fd) {
Quoted 8 lines

lib/igt_bb_factory.c line 88

Quoted 7 lines
lib/igt_bb_factory.c new file +7 -0
+	if (intel_gen(intel_get_drm_devid(fd)) >= 8)
+		return 2;
+	else
+		return 1;
+}
+
+static uint32_t get_register_offset(int ringid)

register_offset feels a bit confusing as name, I suggest to use mmio_base instead

Ok

Quoted 8 lines

lib/igt_bb_factory.c line 94

Quoted 7 lines
lib/igt_bb_factory.c new file +6 -0
+{
+	switch (ringid) {
+	case I915_EXEC_RENDER:
+		return 0x02000;
+	case I915_EXEC_BSD:
+		return 0x12000;

What about the BSD2?

I can add that though my tests do not use BSD2

Quoted 28 lines
Quoted 28 lines
lib/igt_bb_factory.c new file +27 -0
+	case I915_EXEC_BLT:
+		return 0x22000;
+	case I915_EXEC_VEBOX:
+		return 0x1A000;
+	default:
+		igt_assert_f(0, "Invalid ringid %d passed to get_register_offset()\n", ringid);
+	}
+}
+
+/**
+ * igt_create_delay_bb:
+ * @fd: file descriptor for i915 driver instance
+ * @bufmgr: Buffer manager to be used for creation of batch buffers
+ * ringid: Ring to create batch buffer for. e.g. I915_EXEC_RENDER
+ * loops: Number of times to loop
+ * dest: Buffer to use for saving the current loop count and timestamp.
+ *
+ * This creates a batch buffer which will iterate a loop a specified 
+number
+ * of times. Intended for creating batch buffers which take an 
+arbitarily
+ * long time to execute. This can be useful to keep a ring busy while
+ * constructing a test scenario.
+ *
+ * The dest buffer will have a number of Dwords written by the batch 
+buffer
+ * when it runs. They are:
Quoted 8 lines

lib/igt_bb_factory.c line 125

Quoted 7 lines
lib/igt_bb_factory.c new file +7 -0
+ * DW0 & DW1 - These are loade with the value of 'loops' and are decremented
+ *             as the batch buffer executes. They will be 0 after the batch
+ *             buffer completes if it finished succesfully.
+ * DW2 Timestamp - An indication of when the batch buffer ran allowing a
+ *                 comparison between batch buffers to show execution order.
+ *                 May wrap so igt_compare_timestamps() should be used to
+ *                 compare timestamps.

If I recall correctly the lower dword of the timestamp wraps in minutes, which is safe enough for normal tests but might be an issue on very long stress tests. Maybe add a comment to clarify when this is safe to use, also considering that due to the wrapping the actual supported maximum time difference between 2 timestamps is less than the total wrapping time

Will add a comment

Quoted 8 lines

lib/igt_bb_factory.c line 131

Quoted 7 lines
lib/igt_bb_factory.c new file +6 -0
+ *
+ * Returns:
+ * The struct intel_batchbuffer created.
+ */
+struct intel_batchbuffer *igt_create_delay_bb(int fd, drm_intel_bufmgr *bufmgr,
+		int ringid, uint32_t loops, drm_intel_bo *dest)

Other batch-creating functions take the batch as a parameter instead of returning one (e.g. igt_blitter_fast_copy, rendercopy), so for consistency I would do the same here and in the other functions that you've added

Ok, though that adds more code to the tests than gets removed from these library functions.

Quoted 9 lines

lib/igt_bb_factory.c line 137

Quoted 7 lines
lib/igt_bb_factory.c new file +6 -0
+{
+	struct intel_batchbuffer *batch;
+	int addr_size_dw;
+	uint32_t regOffset;
+
+	check_gen_8(fd);

HSW RCS does support this, so maybe we could have something like:

Quoted 9 lines
static void has_delay_bb(int fd, int ringid){
    static bool checked = false;
    if (!checked) {
        int devid = intel_get_drm_devid(fd);
        igt_require(intel_gen(devid) >= 8 ||
                        (IS_HASWELL(devid) && ringid == I915_EXEC_RENDER));
        checked = true;
    }
}

Ok I can update the check_gen() function

Quoted 2 lines

The batch manipulation macros should adjust the number of dwords for addresses automatically

That would require the macro to know the gen version which they don't.

Quoted 4 lines

lib/igt_bb_factory.c line 140

Quoted 3 lines
lib/igt_bb_factory.c new file +3 -0
+
+	addr_size_dw = bb_address_size_dw(fd);
+	regOffset = get_register_offset(ringid);

Similarly to above, I would rename regOffset to mmio_base

Ok

Quoted 17 lines
Quoted 17 lines
lib/igt_bb_factory.c new file +17 -0
+	batch = intel_batchbuffer_alloc(bufmgr, intel_get_drm_devid(fd));
+	igt_assert(batch);
+
+	BEGIN_BATCH(32, 5);
+	/* store current timestamp in DW2 */
+	OUT_BATCH(MI_STORE_REGISTER_MEM(addr_size_dw + 2));
+	OUT_BATCH(regOffset + TIMESTAMP_offset);
+	OUT_RELOC(dest, I915_GEM_DOMAIN_INSTRUCTION, 
+I915_GEM_DOMAIN_INSTRUCTION, DWORDS_TO_BYTES(2));
+
+	/* Load R0 with loops */
+	OUT_BATCH(MI_LOAD_REGISTER_IMM);
+	OUT_BATCH(regOffset + ALU_GPU_R0_LSB_offset);
+	OUT_BATCH(loops);
+	OUT_BATCH(MI_LOAD_REGISTER_IMM);
+	OUT_BATCH(regOffset + ALU_GPU_R0_MSB_offset);
+	OUT_BATCH(0x00000000);
Quoted 8 lines

lib/igt_bb_factory.c line 163

Quoted 7 lines
lib/igt_bb_factory.c new file +7 -0
+	/* Load R1 with 1 */
+	OUT_BATCH(MI_LOAD_REGISTER_IMM);
+	OUT_BATCH(regOffset + ALU_GPU_R1_LSB_offset);
+	OUT_BATCH(0x00000001);
+	OUT_BATCH(MI_LOAD_REGISTER_IMM);
+	OUT_BATCH(regOffset + ALU_GPU_R1_MSB_offset);
+	OUT_BATCH(0x00000000);

instead of emitting 4 MI_LOAD_REGISTER_IMM you can use 1 and specify extra dword length

The MI_LOAD_REGISTER_IMM macro only supports 1 register/value pair. I created a new macro and tried this but I don't think it improved the code so removed it again.

Quoted 23 lines
Quoted 23 lines
lib/igt_bb_factory.c new file +22 -0
+	/* Copy R0 / R1 into SRCA / SRCB, Perform R0 - R1, Store result in R0 */
+	/* e.g. R0 -= 1 */
+	OUT_BATCH(MI_MATH(4));
+	OUT_BATCH(ALU_LOAD(ALU_SRCA_ENCODING, ALU_R0_ENCODING));
+	OUT_BATCH(ALU_LOAD(ALU_SRCB_ENCODING, ALU_R1_ENCODING));
+	OUT_BATCH(ALU_SUB);
+	OUT_BATCH(ALU_STORE(ALU_R0_ENCODING, ALU_ACCU_ENCODING));
+	/* Copy R0 to dest
+	 * On Gen8 MI_CONDITIONAL_BATCH_BUFFER_END BSD ring Compare address
+	 * points to 2 Dwords, a mask (DW0) and data (DW1) which are ANDed
+	 * together.
+	 * On Gen9+, and the other rings on Gen8 Compare address points to
+	 * just Data (DW0). For simplicity always copy R0 LSB to DW0 and DW1.
+	 */
+	OUT_BATCH(MI_STORE_REGISTER_MEM(addr_size_dw + 2));
+	OUT_BATCH(regOffset + ALU_GPU_R0_LSB_offset);
+	OUT_RELOC(dest, I915_GEM_DOMAIN_INSTRUCTION, I915_GEM_DOMAIN_INSTRUCTION, 0);
+	OUT_BATCH(MI_STORE_REGISTER_MEM(addr_size_dw + 2));
+	OUT_BATCH(regOffset + ALU_GPU_R0_LSB_offset);
+	OUT_RELOC(dest, I915_GEM_DOMAIN_INSTRUCTION, I915_GEM_DOMAIN_INSTRUCTION, DWORDS_TO_BYTES(1));
+	/* Repeat until R0 == 0 */
+	OUT_BATCH(MI_CONDITIONAL_BATCH_BUFFER_END);
Quoted 8 lines

lib/igt_bb_factory.c

Quoted 5 lines
lib/igt_bb_factory.c new file +5 -0
+	OUT_BATCH(0x00000000);
+	OUT_RELOC(dest, I915_GEM_DOMAIN_INSTRUCTION, I915_GEM_DOMAIN_INSTRUCTION, 0);
+	OUT_BATCH(MI_BATCH_BUFFER_START | (addr_size_dw - 1));
+	OUT_RELOC(batch->bo, I915_GEM_DOMAIN_INSTRUCTION, 0, 
+DWORDS_TO_BYTES(15));

Instead of using the hardcoded DWORDS_TO_BYTES(15) you could capture batch->ptr before emitting the dword you want to jump to and pass it batch->here

I will add an igt_batch_used() function to do this. There is a static version of this in several tests which could be removed once this patch set has landed.

Quoted 13 lines
Quoted 13 lines
lib/igt_bb_factory.c new file +12 -0
+	/* Should never get here, but end if it happens */
+
+	OUT_BATCH(MI_BATCH_BUFFER_END);
+	ADVANCE_BATCH();
+
+	return batch;
+}
+
+/**
+ * igt_create_timestamp_bb:
+ * @fd: file descriptor for i915 driver instance
+ * @bufmgr: Buffer manager to be used for creation of batch buffers
Quoted 8 lines

lib/igt_bb_factory.c line 207

Quoted 7 lines
lib/igt_bb_factory.c new file +7 -0
+ * ringid: Ring to create batch buffer for. e.g. I915_EXEC_RENDER
+ * dest: Buffer to use for saving the timestamps.
+ * load: Buffer to access. Set NULL if not required.
+ * write: If true and load is not NULL, will also write a timestamp 
+to load
+ * buffer. If false and load is not NULL, will read from load buffer into dest.
+ * Intended for dependency checking.

The "load" buffer handling feels a bit too scheduler-specific to be in a common library. I would move it to the scheduler tests and maybe leave here an emit_timestamp_capture() or something like that.

I would prefer to leave it here as it may be useful to other tests in the future. If the load handling is not needed just set the buffer to NULL.

Quoted 19 lines
Quoted 19 lines
lib/igt_bb_factory.c new file +18 -0
+ *
+ * This creates a batch buffer which writes timestamps into a buffer object.
+ * If 'load' is non null, data is either written to 'load' or copied from 'load'
+ * depending on whether 'write' is set.
+ *
+ * The dest buffer will have a number of Dwords written by the batch 
+buffer
+ * when it runs. They are:
+ * DW0 Reported timestamp - An indication of when the batch buffer ran allowing a
+ *                          comparison between batch buffers to show execution order.
+ *                          May wrap so igt_compare_timestamps() should be used to
+ *                          compare timestamps.
+ * DW1 Context timestamp - Elapsed time since context was created.
+ * DW2 Value copied from DW0 of load if write == false
+ *
+ * Returns:
+ * The struct intel_batchbuffer created.
+ */
Quoted 8 lines

lib/igt_bb_factory.c line 232

Quoted 7 lines
lib/igt_bb_factory.c new file +7 -0
+struct intel_batchbuffer *igt_create_timestamp_bb(int fd, drm_intel_bufmgr *bufmgr,
+		int ringid, drm_intel_bo *dest, drm_intel_bo *load, bool write) {
+	struct intel_batchbuffer *batch;
+	int addr_size_dw;
+	uint32_t regOffset;
+
+	check_gen_8(fd);

The TIMESTAMP reg exists also on pre GEN8, so instead of skipping on those platform we could capture only that register and not the CTX_TIMESTAMP one.

I don't need the CTX timestamp so can remove it.

Quoted 89 lines
Quoted 89 lines
lib/igt_bb_factory.c new file +88 -0
+
+	addr_size_dw = bb_address_size_dw(fd);
+	regOffset = get_register_offset(ringid);
+	batch = intel_batchbuffer_alloc(bufmgr, intel_get_drm_devid(fd));
+	igt_assert(batch);
+
+	BEGIN_BATCH(6, 2);
+	/* store current reported timestamp in DW0 */
+	OUT_BATCH(MI_STORE_REGISTER_MEM(addr_size_dw + 2));
+	OUT_BATCH(regOffset + TIMESTAMP_offset);
+	OUT_RELOC(dest, I915_GEM_DOMAIN_INSTRUCTION, 
+I915_GEM_DOMAIN_INSTRUCTION, DWORDS_TO_BYTES(0));
+
+	/* store current context timestamp in DW1 */
+	OUT_BATCH(MI_STORE_REGISTER_MEM(addr_size_dw + 2));
+	OUT_BATCH(regOffset + CTX_TIMESTAMP_offset);
+	OUT_RELOC(dest, I915_GEM_DOMAIN_INSTRUCTION, 
+I915_GEM_DOMAIN_INSTRUCTION, DWORDS_TO_BYTES(1));
+
+	ADVANCE_BATCH();
+
+	if(load != NULL) {
+		if(write) {
+			BEGIN_BATCH(3, 1);
+			OUT_BATCH(MI_STORE_REGISTER_MEM(addr_size_dw + 2));
+			OUT_BATCH(regOffset + TIMESTAMP_offset);
+			OUT_RELOC(load, I915_GEM_DOMAIN_INSTRUCTION, I915_GEM_DOMAIN_INSTRUCTION, DWORDS_TO_BYTES(0));
+			ADVANCE_BATCH();
+		}
+		else {
+			BEGIN_BATCH(3, 2);
+			OUT_BATCH(MI_COPY_MEM_MEM);
+			OUT_RELOC(dest, I915_GEM_DOMAIN_INSTRUCTION, I915_GEM_DOMAIN_INSTRUCTION, DWORDS_TO_BYTES(2));
+			OUT_RELOC(load, I915_GEM_DOMAIN_INSTRUCTION, 0, DWORDS_TO_BYTES(0));
+			ADVANCE_BATCH();
+		}
+	}
+
+	BEGIN_BATCH(1, 0);
+	OUT_BATCH(MI_BATCH_BUFFER_END);
+	ADVANCE_BATCH();
+
+	return batch;
+}
+
+/**
+ * igt_create_noop_bb:
+ * @fd: file descriptor for i915 driver instance
+ * @bufmgr: Buffer manager to be used for creation of batch buffers
+ * ringid: Ring to create batch buffer for. e.g. I915_EXEC_RENDER
+ * noops: Number of MI_NOOP instructions to add to the batch buffer.
+ *
+ * This creates a batch buffer with a specified number of MI_NOOP instructions.
+ *
+ * Returns:
+ * The struct intel_batchbuffer created.
+ */
+struct intel_batchbuffer *igt_create_noop_bb(int fd, drm_intel_bufmgr *bufmgr,
+		int ringid, int noops)
+{
+	struct intel_batchbuffer *batch;
+	int loop;
+
+	batch = intel_batchbuffer_alloc(bufmgr, intel_get_drm_devid(fd));
+	igt_assert(batch);
+
+	BEGIN_BATCH(noops + 1, 0);
+	for(loop = 0; loop < noops; loop++)
+		OUT_BATCH(MI_NOOP);
+	OUT_BATCH(MI_BATCH_BUFFER_END);
+	ADVANCE_BATCH();
+
+	return batch;
+}
+
+/* Store calibrated values so they only need calculating once.
+ * I915_EXEC_RING_MASK allows 3 bits for ring ids so allow for 
+storing 8 values */ static uint32_t calibrated_ring_value[8] = {0, 0, 
+0, 0, 0, 0, 0, 0};
+
+/**
+ * igt_calibrate_delay_bb:
+ * @fd: file descriptor for i915 driver instance
+ * @bufmgr: Buffer manager to be used for creation of batch buffers
+ * ringid: Ring to calibrate. e.g. I915_EXEC_RENDER
+ *
+ * This calculates the value of loops that would need to be passed to
+ * igt_create_delay_bb() to create a delay of about 1 second on the 
Quoted 8 lines

lib/igt_bb_factory.c line 323

Quoted 7 lines
lib/igt_bb_factory.c new file +7 -0
+specified
+ * ring.
+ *
+ * Returns:
+ * uint32_t to be passed to igt_create_delay_bb().
+ */
+#define CAL_SEED (0x100000)

Can you add a comment regarding how this seed was picked? something like the expected duration of the execution with this seed on a specific platform would be nice.

Will state some example timings

Quoted 12 lines
Quoted 12 lines
lib/igt_bb_factory.c new file +11 -0
+uint32_t igt_calibrate_delay_bb(int fd, drm_intel_bufmgr *bufmgr, int 
+ringid) {
+	uint32_t *buf;
+	struct intel_batchbuffer *bb;
+	struct timespec start, end;
+	uint64_t duration;
+	uint64_t calibrated;
+	drm_intel_bo *target_bo;
+
+	igt_assert(ringid < 8);
+	if(calibrated_ring_value[ringid] != 0)
Quoted 8 lines

lib/igt_bb_factory.c line 341

Quoted 7 lines
lib/igt_bb_factory.c new file +7 -0
+		return calibrated_ring_value[ringid];
+
+	target_bo = drm_intel_bo_alloc(bufmgr, "target bo", BATCH_SZ, BATCH_SZ);
+	igt_assert(target_bo);
+
+	/* Put some non zero values in the target bo */
+	drm_intel_bo_map(target_bo, 1);

Missing return code check here. Also, instead of mapping and unmapping a single subdata call would in my opinion be cleaner to write a single dword.

Ok

Quoted 13 lines

lib/igt_bb_factory.c line 352

Quoted 12 lines
lib/igt_bb_factory.c new file +11 -0
+	buf = target_bo->virtual;
+	buf[0] = 0xff;
+	drm_intel_bo_unmap(target_bo);
+
+	bb = igt_create_delay_bb(fd, bufmgr, ringid, CAL_SEED, target_bo);
+
+	gem_quiescent_gpu(fd);
+	clock_gettime(CLOCK_MONOTONIC, &start);
+	intel_batchbuffer_flush_on_ring(bb, ringid);
+	/* This will not return until the bo has finished executing */
+	drm_intel_bo_map(target_bo, 0);

Missing return code check and unmap. Maybe using drm_intel_bo_wait_for_rendering here and get_subdata below could be slightly neater

Ok

Quoted 113 lines
Quoted 10 lines
lib/igt_bb_factory.c new file +9 -0
+	clock_gettime(CLOCK_MONOTONIC, &end);
+
+	buf = target_bo->virtual;
+	/* buf[0] in the target buffer should be 0 if the batch buffer completed */
+	igt_assert_f(buf[0] == 0, "buf[0] expected 0x0, got 0x%x\n", 
+buf[0]);
+
+	duration = ((((uint64_t)end.tv_sec - (uint64_t)start.tv_sec) * SEC_TO_NSEC)
+	           + (uint64_t)end.tv_nsec) - (uint64_t)start.tv_nsec;

lib/igt_bb_factory.c line 370

Quoted 10 lines
lib/igt_bb_factory.c new file +10 -0
+
+	calibrated = (((uint64_t)(CAL_SEED) * SEC_TO_NSEC) / duration);
+	igt_debug("Uncalibrated run took %" PRIu64 ".%04" PRIu64 "s\n",
+	          duration / SEC_TO_NSEC,
+	          (duration % SEC_TO_NSEC) / 100000);
+	drm_intel_bo_unreference(target_bo);
+	intel_batchbuffer_free(bb);
+
+	/* Sanity check. If duration < 100ms, something has clearly gone wrong
+	 * */

Without any details on the expected duration when using CAL_SEED this comment is not very clear

Quoted 91 lines
lib/igt_bb_factory.c new file +33 -0
+	igt_assert(duration > (SEC_TO_NSEC  / 10));
+
+	igt_assert_f(calibrated <= UINT32_MAX, "Calibrated value > 
+UINT32_MAX\n");
+
+	calibrated_ring_value[ringid] = (uint32_t)calibrated;
+	return (uint32_t)calibrated;
+}
+
+/**
+ * igt_compare_timestamps:
+ * @ts1: timestamp 1
+ * @ts2: timestamp 2
+ *
+ * This compares two uint32_t timestamps. To handle wrapping it 
+assumes the
+ * difference between the two timestamps is less than 1/4 the max 
+elapsed time
+ * represented by the counters.
+ * It also assumes the timestamps are samples from the same counter.
+ *
+ * Returns:
+ * True if ts2 > ts1, allowing for counter wrapping, false otherwise.
+ */
+
+bool igt_compare_timestamps(uint32_t ts1, uint32_t ts2) {
+	if (ts2 > ts1)
+		return true;
+	else if ((ts1 > 0x80000000) && (ts2 < 0x40000000))
+		return true; /* Assuming timestamp counter wrapped */
+	else
+		return false;
+}
lib/igt_bb_factory.h new file mode renamed from lib/igt_bb_factory.h +0 -0

100644 index 0000000..3ab7f13

lib/igt_bb_factory.h new file +53 -0
@@ -0,0 +1,47 @@
+/*
+ * Copyright © 2016 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person 
+obtaining a
+ * copy of this software and associated documentation files (the 
+"Software"),
+ * to deal in the Software without restriction, including without 
+limitation
+ * the rights to use, copy, modify, merge, publish, distribute, 
+sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom 
+the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including 
+the next
+ * paragraph) shall be included in all copies or substantial portions 
+of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 
+EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF 
+MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT 
+SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES 
+OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, 
+ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 
+OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ * Authors:
+ *    Derek Morton <[email protected]>
+ *
+ */
+
+#ifndef IGT_BB_FACTORY_H
+#define IGT_BB_FACTORY_H
+
+#include "intel_batchbuffer.h"
+#include <stdint.h>
+
+struct intel_batchbuffer *igt_create_delay_bb(int fd, drm_intel_bufmgr *bufmgr,
+		int ringid, uint32_t loops, drm_intel_bo *dest);
+
+struct intel_batchbuffer *igt_create_timestamp_bb(int fd, drm_intel_bufmgr *bufmgr,
+		int ringid, drm_intel_bo *dest, drm_intel_bo *load, bool write);
+
+struct intel_batchbuffer *igt_create_noop_bb(int fd, drm_intel_bufmgr *bufmgr,
Quoted 10 lines

lib/igt_bb_factory.h line 47

Quoted 8 lines
lib/igt_bb_factory.h new file +8 -0
+		int ringid, int noops);
+
+uint32_t igt_calibrate_delay_bb(int fd, drm_intel_bufmgr *bufmgr, int 
+ringid);
+
+bool igt_compare_timestamps(uint32_t ts1, uint32_t ts2);
+
+#endif /* IGT_BB_FACTORY_H */

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#5 lore raw

Re: [PATCH i-g-t 1/4] lib/igt_bb_factory: Add igt_bb_factory library

Quoted 267 lines

-----Original Message-----
From: Intel-gfx [mailto:[email protected]] On Behalf Of Morton, Derek J
Sent: Tuesday, March 1, 2016 10:31 AM
To: Ceraolo Spurio, Daniele <[email protected]>; [email protected]
Subject: Re: [Intel-gfx] [PATCH i-g-t 1/4] lib/igt_bb_factory: Add igt_bb_factory library

Quoted 159 lines

-----Original Message-----
From: Ceraolo Spurio, Daniele
Sent: Wednesday, February 17, 2016 9:48 AM
To: Morton, Derek J <[email protected]>; [email protected]
Subject: Re: [Intel-gfx] [PATCH i-g-t 1/4] lib/igt_bb_factory: Add igt_bb_factory library

Quoted 146 lines · Derek Morton

Adds functions to create a number of different batch buffers to perform several functions including:
Batch buffer which will run for a long duration to provide a delay on a specified ring.
Function to calibrate the delay batch buffer to run for a specified period of time.
Function to create a batch buffer which writes timestamps to a buffer object. Function to compare timestamps allowing for wrapping of the values.

Intended for use by the gem_scheduler test initially but will be used by other tests in development.

---
  lib/Makefile.sources |   2 +
  lib/igt.h            |   1 +
  lib/igt_bb_factory.c | 401 +++++++++++++++++++++++++++++++++++++++++++++++++++
  lib/igt_bb_factory.h |  47 ++++++
  4 files changed, 451 insertions(+)

create mode 100644 lib/igt_bb_factory.c
create mode 100644 lib/igt_bb_factory.h

lib/Makefile.sources index renamed from lib/Makefile.sources +0 -0

4999868..c560b3e 100644

lib/Makefile.sources +2 -0
@@ -7,6 +7,8 @@ libintel_tools_la_SOURCES = 	\
  	i915_reg.h		\
  	i915_pciids.h		\
  	igt.h			\
+	igt_bb_factory.c	\
+	igt_bb_factory.h	\
  	igt_debugfs.c		\
  	igt_debugfs.h		\
  	igt_aux.c		\
lib/igt.h +1 -0
index 3be2551..0f29420 100644
@@ -36,6 +36,7 @@
  #include "igt_gt.h"
  #include "igt_kms.h"
  #include "igt_stats.h"
+#include "igt_bb_factory.h"
  #include "instdone.h"
  #include "intel_batchbuffer.h"
  #include "intel_chipset.h"
lib/igt_bb_factory.c new file renamed from lib/igt_bb_factory.c +0 -0

mode
100644 index 0000000..eea63c6

lib/igt_bb_factory.c new file +93 -0
@@ -0,0 +1,401 @@
+/*
+ * Copyright © 2016 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person 
+obtaining a
+ * copy of this software and associated documentation files (the 
+"Software"),
+ * to deal in the Software without restriction, including without 
+limitation
+ * the rights to use, copy, modify, merge, publish, distribute, 
+sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom 
+the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including 
+the next
+ * paragraph) shall be included in all copies or substantial 
+portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 
+EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF 
+MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO 
+EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES 
+OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, 
+ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 
+OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ * Authors:
+ *    Derek Morton <[email protected]>
+ *
+ */
+
+#include "igt.h"
+#include "intel_batchbuffer.h"
+#include <stdint.h>
+#include <inttypes.h>
+#include <time.h>
+
+#define SEC_TO_NSEC (1000 * 1000 * 1000) #define DWORDS_TO_BYTES(x)
+((x)*4)
+
+#define MI_STORE_REGISTER_MEM(LENGTH)   ((0x024 << 23) | ((LENGTH - 2) & 0xff))
+#define MI_MATH(NrInst)                 ((0x01A << 23) | ((NrInst - 1) & 0x3f))
+#define MI_CONDITIONAL_BATCH_BUFFER_END ((0x036 << 23) | (1 << 21) | 2)
+#define MI_COPY_MEM_MEM                 ((0x02E << 23) | (3))
+
+#define ALU_LOAD(TO, FROM)  ((0x080 << 20) | ((TO) << 10) | (FROM))
+#define ALU_SUB             ( 0x101 << 20)
+#define ALU_STORE(TO, FROM) ((0x180 << 20) | ((TO) << 10) | (FROM))
+
+#define TIMESTAMP_offset      (0x358) /* Elapsed time from system start */
+#define CTX_TIMESTAMP_offset  (0x3A8) /* Elapsed Time from context 
+creation */ #define ALU_GPU_R0_LSB_offset (0x600) #define 
+ALU_GPU_R0_MSB_offset (0x604) #define ALU_GPU_R1_LSB_offset (0x608) 
+#define ALU_GPU_R1_MSB_offset (0x60C) #define ALU_GPU_R2_LSB_offset
+(0x610) #define ALU_GPU_R2_MSB_offset (0x614)
+
+#define ALU_R0_ENCODING   (0x00)
+#define ALU_R1_ENCODING   (0x01)
+#define ALU_SRCA_ENCODING (0x20)
+#define ALU_SRCB_ENCODING (0x21)
+#define ALU_ACCU_ENCODING (0x31)
+
+/**
+ * SECTION:igt_bb_factory
+ * @short_description: Utility functions for creating batch buffers
+ * @title: Batch Buffer Factory
+ * @include: igt.h
+ *
+ * This library implements functions for creating batch buffers 
+which may be
+ * useful to multiple tests.
+ */
+
+static void check_gen_8(int fd)
+{
+	static bool checked = false;
+	if(!checked) {
+		igt_require(intel_gen(intel_get_drm_devid(fd)) >= 8);
+		checked = true;
+	}
+}
+
+static int bb_address_size_dw(int fd) {
+	if (intel_gen(intel_get_drm_devid(fd)) >= 8)
Quoted 8 lines

lib/igt_bb_factory.c line 88

Quoted 6 lines
lib/igt_bb_factory.c new file +6 -0
+		return 2;
+	else
+		return 1;
+}
+
+static uint32_t get_register_offset(int ringid)

register_offset feels a bit confusing as name, I suggest to use mmio_base instead

Ok

Quoted 8 lines

lib/igt_bb_factory.c line 94

Quoted 7 lines
lib/igt_bb_factory.c new file +6 -0
+{
+	switch (ringid) {
+	case I915_EXEC_RENDER:
+		return 0x02000;
+	case I915_EXEC_BSD:
+		return 0x12000;

What about the BSD2?

I can add that though my tests do not use BSD2

Quoted 34 lines
Quoted 34 lines
lib/igt_bb_factory.c new file +33 -0
+	case I915_EXEC_BLT:
+		return 0x22000;
+	case I915_EXEC_VEBOX:
+		return 0x1A000;
+	default:
+		igt_assert_f(0, "Invalid ringid %d passed to get_register_offset()\n", ringid);
+	}
+}
+
+/**
+ * igt_create_delay_bb:
+ * @fd: file descriptor for i915 driver instance
+ * @bufmgr: Buffer manager to be used for creation of batch buffers
+ * ringid: Ring to create batch buffer for. e.g. I915_EXEC_RENDER
+ * loops: Number of times to loop
+ * dest: Buffer to use for saving the current loop count and timestamp.
+ *
+ * This creates a batch buffer which will iterate a loop a specified 
+number
+ * of times. Intended for creating batch buffers which take an 
+arbitarily
+ * long time to execute. This can be useful to keep a ring busy 
+while
+ * constructing a test scenario.
+ *
+ * The dest buffer will have a number of Dwords written by the batch 
+buffer
+ * when it runs. They are:
+ * DW0 & DW1 - These are loade with the value of 'loops' and are decremented
+ *             as the batch buffer executes. They will be 0 after the batch
+ *             buffer completes if it finished succesfully.
+ * DW2 Timestamp - An indication of when the batch buffer ran allowing a
+ *                 comparison between batch buffers to show execution order.
Quoted 8 lines

lib/igt_bb_factory.c line 140

Quoted 2 lines
lib/igt_bb_factory.c new file +2 -0
+ *                 May wrap so igt_compare_timestamps() should be used to
+ *                 compare timestamps.

If I recall correctly the lower dword of the timestamp wraps in minutes, which is safe enough for normal tests but might be an issue on very long stress tests. Maybe add a comment to clarify when this is safe to use, also considering that due to the wrapping the actual supported maximum time difference between 2 timestamps is less than the total wrapping time

Will add a comment

Quoted 11 lines

lib/igt_bb_factory.c line 131

Quoted 7 lines
lib/igt_bb_factory.c new file +6 -0
+ *
+ * Returns:
+ * The struct intel_batchbuffer created.
+ */
+struct intel_batchbuffer *igt_create_delay_bb(int fd, drm_intel_bufmgr *bufmgr,
+		int ringid, uint32_t loops, drm_intel_bo *dest)

Other batch-creating functions take the batch as a parameter instead of returning one (e.g. igt_blitter_fast_copy, rendercopy), so for consistency I would do the same here and in the other functions that you've added

Ok, though that adds more code to the tests than gets removed from these library functions.

Quoted 9 lines

lib/igt_bb_factory.c line 137

Quoted 7 lines
lib/igt_bb_factory.c new file +6 -0
+{
+	struct intel_batchbuffer *batch;
+	int addr_size_dw;
+	uint32_t regOffset;
+
+	check_gen_8(fd);

HSW RCS does support this, so maybe we could have something like:

Quoted 9 lines
static void has_delay_bb(int fd, int ringid){
    static bool checked = false;
    if (!checked) {
        int devid = intel_get_drm_devid(fd);
        igt_require(intel_gen(devid) >= 8 ||
                        (IS_HASWELL(devid) && ringid == I915_EXEC_RENDER));
        checked = true;
    }
}
Quoted 1 line

Ok I can update the check_gen() function

The CMD parser blacklists the TIMESTAMP register on gen 7.5 so I will leave this as requiring gen8+

//Derek

Quoted 399 lines
Quoted 4 lines

The batch manipulation macros should adjust the number of dwords for addresses automatically

That would require the macro to know the gen version which they don't.

Quoted 4 lines

lib/igt_bb_factory.c line 140

Quoted 3 lines
lib/igt_bb_factory.c new file +3 -0
+
+	addr_size_dw = bb_address_size_dw(fd);
+	regOffset = get_register_offset(ringid);

Similarly to above, I would rename regOffset to mmio_base

Ok

Quoted 18 lines
Quoted 18 lines
lib/igt_bb_factory.c new file +18 -0
+	batch = intel_batchbuffer_alloc(bufmgr, intel_get_drm_devid(fd));
+	igt_assert(batch);
+
+	BEGIN_BATCH(32, 5);
+	/* store current timestamp in DW2 */
+	OUT_BATCH(MI_STORE_REGISTER_MEM(addr_size_dw + 2));
+	OUT_BATCH(regOffset + TIMESTAMP_offset);
+	OUT_RELOC(dest, I915_GEM_DOMAIN_INSTRUCTION, 
+I915_GEM_DOMAIN_INSTRUCTION, DWORDS_TO_BYTES(2));
+
+	/* Load R0 with loops */
+	OUT_BATCH(MI_LOAD_REGISTER_IMM);
+	OUT_BATCH(regOffset + ALU_GPU_R0_LSB_offset);
+	OUT_BATCH(loops);
+	OUT_BATCH(MI_LOAD_REGISTER_IMM);
+	OUT_BATCH(regOffset + ALU_GPU_R0_MSB_offset);
+	OUT_BATCH(0x00000000);
+	/* Load R1 with 1 */
Quoted 8 lines

lib/igt_bb_factory.c line 163

Quoted 6 lines
lib/igt_bb_factory.c new file +6 -0
+	OUT_BATCH(MI_LOAD_REGISTER_IMM);
+	OUT_BATCH(regOffset + ALU_GPU_R1_LSB_offset);
+	OUT_BATCH(0x00000001);
+	OUT_BATCH(MI_LOAD_REGISTER_IMM);
+	OUT_BATCH(regOffset + ALU_GPU_R1_MSB_offset);
+	OUT_BATCH(0x00000000);

instead of emitting 4 MI_LOAD_REGISTER_IMM you can use 1 and specify extra dword length

The MI_LOAD_REGISTER_IMM macro only supports 1 register/value pair. I created a new macro and tried this but I don't think it improved the code so removed it again.

Quoted 23 lines
Quoted 23 lines
lib/igt_bb_factory.c new file +22 -0
+	/* Copy R0 / R1 into SRCA / SRCB, Perform R0 - R1, Store result in R0 */
+	/* e.g. R0 -= 1 */
+	OUT_BATCH(MI_MATH(4));
+	OUT_BATCH(ALU_LOAD(ALU_SRCA_ENCODING, ALU_R0_ENCODING));
+	OUT_BATCH(ALU_LOAD(ALU_SRCB_ENCODING, ALU_R1_ENCODING));
+	OUT_BATCH(ALU_SUB);
+	OUT_BATCH(ALU_STORE(ALU_R0_ENCODING, ALU_ACCU_ENCODING));
+	/* Copy R0 to dest
+	 * On Gen8 MI_CONDITIONAL_BATCH_BUFFER_END BSD ring Compare address
+	 * points to 2 Dwords, a mask (DW0) and data (DW1) which are ANDed
+	 * together.
+	 * On Gen9+, and the other rings on Gen8 Compare address points to
+	 * just Data (DW0). For simplicity always copy R0 LSB to DW0 and DW1.
+	 */
+	OUT_BATCH(MI_STORE_REGISTER_MEM(addr_size_dw + 2));
+	OUT_BATCH(regOffset + ALU_GPU_R0_LSB_offset);
+	OUT_RELOC(dest, I915_GEM_DOMAIN_INSTRUCTION, I915_GEM_DOMAIN_INSTRUCTION, 0);
+	OUT_BATCH(MI_STORE_REGISTER_MEM(addr_size_dw + 2));
+	OUT_BATCH(regOffset + ALU_GPU_R0_LSB_offset);
+	OUT_RELOC(dest, I915_GEM_DOMAIN_INSTRUCTION, I915_GEM_DOMAIN_INSTRUCTION, DWORDS_TO_BYTES(1));
+	/* Repeat until R0 == 0 */
+	OUT_BATCH(MI_CONDITIONAL_BATCH_BUFFER_END);
Quoted 8 lines

lib/igt_bb_factory.c

Quoted 5 lines
lib/igt_bb_factory.c new file +5 -0
+	OUT_BATCH(0x00000000);
+	OUT_RELOC(dest, I915_GEM_DOMAIN_INSTRUCTION, I915_GEM_DOMAIN_INSTRUCTION, 0);
+	OUT_BATCH(MI_BATCH_BUFFER_START | (addr_size_dw - 1));
+	OUT_RELOC(batch->bo, I915_GEM_DOMAIN_INSTRUCTION, 0, 
+DWORDS_TO_BYTES(15));

Instead of using the hardcoded DWORDS_TO_BYTES(15) you could capture batch->ptr before emitting the dword you want to jump to and pass it batch->here

I will add an igt_batch_used() function to do this. There is a static version of this in several tests which could be removed once this patch set has landed.

Quoted 13 lines
Quoted 13 lines
lib/igt_bb_factory.c new file +12 -0
+	/* Should never get here, but end if it happens */
+
+	OUT_BATCH(MI_BATCH_BUFFER_END);
+	ADVANCE_BATCH();
+
+	return batch;
+}
+
+/**
+ * igt_create_timestamp_bb:
+ * @fd: file descriptor for i915 driver instance
+ * @bufmgr: Buffer manager to be used for creation of batch buffers
Quoted 8 lines

lib/igt_bb_factory.c line 207

Quoted 7 lines
lib/igt_bb_factory.c new file +7 -0
+ * ringid: Ring to create batch buffer for. e.g. I915_EXEC_RENDER
+ * dest: Buffer to use for saving the timestamps.
+ * load: Buffer to access. Set NULL if not required.
+ * write: If true and load is not NULL, will also write a timestamp 
+to load
+ * buffer. If false and load is not NULL, will read from load buffer into dest.
+ * Intended for dependency checking.

The "load" buffer handling feels a bit too scheduler-specific to be in a common library. I would move it to the scheduler tests and maybe leave here an emit_timestamp_capture() or something like that.

I would prefer to leave it here as it may be useful to other tests in the future. If the load handling is not needed just set the buffer to NULL.

Quoted 19 lines
Quoted 19 lines
lib/igt_bb_factory.c new file +18 -0
+ *
+ * This creates a batch buffer which writes timestamps into a buffer object.
+ * If 'load' is non null, data is either written to 'load' or copied from 'load'
+ * depending on whether 'write' is set.
+ *
+ * The dest buffer will have a number of Dwords written by the batch 
+buffer
+ * when it runs. They are:
+ * DW0 Reported timestamp - An indication of when the batch buffer ran allowing a
+ *                          comparison between batch buffers to show execution order.
+ *                          May wrap so igt_compare_timestamps() should be used to
+ *                          compare timestamps.
+ * DW1 Context timestamp - Elapsed time since context was created.
+ * DW2 Value copied from DW0 of load if write == false
+ *
+ * Returns:
+ * The struct intel_batchbuffer created.
+ */
Quoted 8 lines

lib/igt_bb_factory.c line 232

Quoted 7 lines
lib/igt_bb_factory.c new file +7 -0
+struct intel_batchbuffer *igt_create_timestamp_bb(int fd, drm_intel_bufmgr *bufmgr,
+		int ringid, drm_intel_bo *dest, drm_intel_bo *load, bool write) {
+	struct intel_batchbuffer *batch;
+	int addr_size_dw;
+	uint32_t regOffset;
+
+	check_gen_8(fd);

The TIMESTAMP reg exists also on pre GEN8, so instead of skipping on those platform we could capture only that register and not the CTX_TIMESTAMP one.

I don't need the CTX timestamp so can remove it.

Quoted 90 lines
Quoted 90 lines
lib/igt_bb_factory.c new file +89 -0
+
+	addr_size_dw = bb_address_size_dw(fd);
+	regOffset = get_register_offset(ringid);
+	batch = intel_batchbuffer_alloc(bufmgr, intel_get_drm_devid(fd));
+	igt_assert(batch);
+
+	BEGIN_BATCH(6, 2);
+	/* store current reported timestamp in DW0 */
+	OUT_BATCH(MI_STORE_REGISTER_MEM(addr_size_dw + 2));
+	OUT_BATCH(regOffset + TIMESTAMP_offset);
+	OUT_RELOC(dest, I915_GEM_DOMAIN_INSTRUCTION, 
+I915_GEM_DOMAIN_INSTRUCTION, DWORDS_TO_BYTES(0));
+
+	/* store current context timestamp in DW1 */
+	OUT_BATCH(MI_STORE_REGISTER_MEM(addr_size_dw + 2));
+	OUT_BATCH(regOffset + CTX_TIMESTAMP_offset);
+	OUT_RELOC(dest, I915_GEM_DOMAIN_INSTRUCTION, 
+I915_GEM_DOMAIN_INSTRUCTION, DWORDS_TO_BYTES(1));
+
+	ADVANCE_BATCH();
+
+	if(load != NULL) {
+		if(write) {
+			BEGIN_BATCH(3, 1);
+			OUT_BATCH(MI_STORE_REGISTER_MEM(addr_size_dw + 2));
+			OUT_BATCH(regOffset + TIMESTAMP_offset);
+			OUT_RELOC(load, I915_GEM_DOMAIN_INSTRUCTION, I915_GEM_DOMAIN_INSTRUCTION, DWORDS_TO_BYTES(0));
+			ADVANCE_BATCH();
+		}
+		else {
+			BEGIN_BATCH(3, 2);
+			OUT_BATCH(MI_COPY_MEM_MEM);
+			OUT_RELOC(dest, I915_GEM_DOMAIN_INSTRUCTION, I915_GEM_DOMAIN_INSTRUCTION, DWORDS_TO_BYTES(2));
+			OUT_RELOC(load, I915_GEM_DOMAIN_INSTRUCTION, 0, DWORDS_TO_BYTES(0));
+			ADVANCE_BATCH();
+		}
+	}
+
+	BEGIN_BATCH(1, 0);
+	OUT_BATCH(MI_BATCH_BUFFER_END);
+	ADVANCE_BATCH();
+
+	return batch;
+}
+
+/**
+ * igt_create_noop_bb:
+ * @fd: file descriptor for i915 driver instance
+ * @bufmgr: Buffer manager to be used for creation of batch buffers
+ * ringid: Ring to create batch buffer for. e.g. I915_EXEC_RENDER
+ * noops: Number of MI_NOOP instructions to add to the batch buffer.
+ *
+ * This creates a batch buffer with a specified number of MI_NOOP instructions.
+ *
+ * Returns:
+ * The struct intel_batchbuffer created.
+ */
+struct intel_batchbuffer *igt_create_noop_bb(int fd, drm_intel_bufmgr *bufmgr,
+		int ringid, int noops)
+{
+	struct intel_batchbuffer *batch;
+	int loop;
+
+	batch = intel_batchbuffer_alloc(bufmgr, intel_get_drm_devid(fd));
+	igt_assert(batch);
+
+	BEGIN_BATCH(noops + 1, 0);
+	for(loop = 0; loop < noops; loop++)
+		OUT_BATCH(MI_NOOP);
+	OUT_BATCH(MI_BATCH_BUFFER_END);
+	ADVANCE_BATCH();
+
+	return batch;
+}
+
+/* Store calibrated values so they only need calculating once.
+ * I915_EXEC_RING_MASK allows 3 bits for ring ids so allow for 
+storing 8 values */ static uint32_t calibrated_ring_value[8] = {0, 
+0, 0, 0, 0, 0, 0, 0};
+
+/**
+ * igt_calibrate_delay_bb:
+ * @fd: file descriptor for i915 driver instance
+ * @bufmgr: Buffer manager to be used for creation of batch buffers
+ * ringid: Ring to calibrate. e.g. I915_EXEC_RENDER
+ *
+ * This calculates the value of loops that would need to be passed 
+to
+ * igt_create_delay_bb() to create a delay of about 1 second on the 
Quoted 8 lines

lib/igt_bb_factory.c line 323

Quoted 7 lines
lib/igt_bb_factory.c new file +7 -0
+specified
+ * ring.
+ *
+ * Returns:
+ * uint32_t to be passed to igt_create_delay_bb().
+ */
+#define CAL_SEED (0x100000)

Can you add a comment regarding how this seed was picked? something like the expected duration of the execution with this seed on a specific platform would be nice.

Will state some example timings

Quoted 13 lines
Quoted 13 lines
lib/igt_bb_factory.c new file +12 -0
+uint32_t igt_calibrate_delay_bb(int fd, drm_intel_bufmgr *bufmgr, 
+int
+ringid) {
+	uint32_t *buf;
+	struct intel_batchbuffer *bb;
+	struct timespec start, end;
+	uint64_t duration;
+	uint64_t calibrated;
+	drm_intel_bo *target_bo;
+
+	igt_assert(ringid < 8);
+	if(calibrated_ring_value[ringid] != 0)
Quoted 8 lines

lib/igt_bb_factory.c line 341

Quoted 7 lines
lib/igt_bb_factory.c new file +7 -0
+		return calibrated_ring_value[ringid];
+
+	target_bo = drm_intel_bo_alloc(bufmgr, "target bo", BATCH_SZ, BATCH_SZ);
+	igt_assert(target_bo);
+
+	/* Put some non zero values in the target bo */
+	drm_intel_bo_map(target_bo, 1);

Missing return code check here. Also, instead of mapping and unmapping a single subdata call would in my opinion be cleaner to write a single dword.

Ok

Quoted 15 lines

lib/igt_bb_factory.c line 352

Quoted 12 lines
lib/igt_bb_factory.c new file +11 -0
+	buf = target_bo->virtual;
+	buf[0] = 0xff;
+	drm_intel_bo_unmap(target_bo);
+
+	bb = igt_create_delay_bb(fd, bufmgr, ringid, CAL_SEED, target_bo);
+
+	gem_quiescent_gpu(fd);
+	clock_gettime(CLOCK_MONOTONIC, &start);
+	intel_batchbuffer_flush_on_ring(bb, ringid);
+	/* This will not return until the bo has finished executing */
+	drm_intel_bo_map(target_bo, 0);

Missing return code check and unmap. Maybe using drm_intel_bo_wait_for_rendering here and get_subdata below could be slightly neater

Ok

Quoted 115 lines
Quoted 10 lines
lib/igt_bb_factory.c new file +9 -0
+	clock_gettime(CLOCK_MONOTONIC, &end);
+
+	buf = target_bo->virtual;
+	/* buf[0] in the target buffer should be 0 if the batch buffer completed */
+	igt_assert_f(buf[0] == 0, "buf[0] expected 0x0, got 0x%x\n", 
+buf[0]);
+
+	duration = ((((uint64_t)end.tv_sec - (uint64_t)start.tv_sec) * SEC_TO_NSEC)
+	           + (uint64_t)end.tv_nsec) - (uint64_t)start.tv_nsec;

lib/igt_bb_factory.c line 370

Quoted 10 lines
lib/igt_bb_factory.c new file +10 -0
+
+	calibrated = (((uint64_t)(CAL_SEED) * SEC_TO_NSEC) / duration);
+	igt_debug("Uncalibrated run took %" PRIu64 ".%04" PRIu64 "s\n",
+	          duration / SEC_TO_NSEC,
+	          (duration % SEC_TO_NSEC) / 100000);
+	drm_intel_bo_unreference(target_bo);
+	intel_batchbuffer_free(bb);
+
+	/* Sanity check. If duration < 100ms, something has clearly gone wrong
+	 * */

Without any details on the expected duration when using CAL_SEED this comment is not very clear

Quoted 92 lines
lib/igt_bb_factory.c new file +33 -0
+	igt_assert(duration > (SEC_TO_NSEC  / 10));
+
+	igt_assert_f(calibrated <= UINT32_MAX, "Calibrated value > 
+UINT32_MAX\n");
+
+	calibrated_ring_value[ringid] = (uint32_t)calibrated;
+	return (uint32_t)calibrated;
+}
+
+/**
+ * igt_compare_timestamps:
+ * @ts1: timestamp 1
+ * @ts2: timestamp 2
+ *
+ * This compares two uint32_t timestamps. To handle wrapping it 
+assumes the
+ * difference between the two timestamps is less than 1/4 the max 
+elapsed time
+ * represented by the counters.
+ * It also assumes the timestamps are samples from the same counter.
+ *
+ * Returns:
+ * True if ts2 > ts1, allowing for counter wrapping, false otherwise.
+ */
+
+bool igt_compare_timestamps(uint32_t ts1, uint32_t ts2) {
+	if (ts2 > ts1)
+		return true;
+	else if ((ts1 > 0x80000000) && (ts2 < 0x40000000))
+		return true; /* Assuming timestamp counter wrapped */
+	else
+		return false;
+}
lib/igt_bb_factory.h new file renamed from lib/igt_bb_factory.h +0 -0

mode
100644 index 0000000..3ab7f13

lib/igt_bb_factory.h new file +53 -0
@@ -0,0 +1,47 @@
+/*
+ * Copyright © 2016 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person 
+obtaining a
+ * copy of this software and associated documentation files (the 
+"Software"),
+ * to deal in the Software without restriction, including without 
+limitation
+ * the rights to use, copy, modify, merge, publish, distribute, 
+sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom 
+the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including 
+the next
+ * paragraph) shall be included in all copies or substantial 
+portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 
+EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF 
+MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO 
+EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES 
+OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, 
+ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 
+OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ * Authors:
+ *    Derek Morton <[email protected]>
+ *
+ */
+
+#ifndef IGT_BB_FACTORY_H
+#define IGT_BB_FACTORY_H
+
+#include "intel_batchbuffer.h"
+#include <stdint.h>
+
+struct intel_batchbuffer *igt_create_delay_bb(int fd, drm_intel_bufmgr *bufmgr,
+		int ringid, uint32_t loops, drm_intel_bo *dest);
+
+struct intel_batchbuffer *igt_create_timestamp_bb(int fd, drm_intel_bufmgr *bufmgr,
+		int ringid, drm_intel_bo *dest, drm_intel_bo *load, bool write);
+
+struct intel_batchbuffer *igt_create_noop_bb(int fd, drm_intel_bufmgr *bufmgr,
Quoted 10 lines

lib/igt_bb_factory.h line 47

Quoted 8 lines
lib/igt_bb_factory.h new file +8 -0
+		int ringid, int noops);
+
+uint32_t igt_calibrate_delay_bb(int fd, drm_intel_bufmgr *bufmgr, 
+int ringid);
+
+bool igt_compare_timestamps(uint32_t ts1, uint32_t ts2);
+
+#endif /* IGT_BB_FACTORY_H */
Quoted 5 lines

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#6 lore raw

Re: [PATCH i-g-t 1/4] lib/igt_bb_factory: Add igt_bb_factory library

Quoted 4 lines · Derek J

The CMD parser blacklists the TIMESTAMP register on gen 7.5 so I will leave this as requiring gen8+

//Derek

You might still be able to store its value (to memory or the PPHWSP?) using a PIPE_CONTROL or MI_FLUSH_DW instruction rather than accessing the register.

.Dave.

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#7 lore raw

PATCH 2/4 tests/gem_scheduler: Add gem_scheduler test

In reply to Derek Morton

This is intended to test the scheduler behaviour is correct.
The subtests are
<ring>-basic
Tests that batch buffers of the same priority submitted to a ring execute in the order they are submitted.
<ring>-read
Submits a batch buffer with a read dependency to a buffer object to a ring which is held in the scheduler queue by a long running batch buffer. Submit batch buffers to other rings that have a read dependency to the same buffer object. Ensure they execute before the batch buffer being held up behind the long running batch buffer.
<ring>-write
Submits a batch buffer with a write dependency to a buffer object to a ring which is held in the scheduler queue by a long running batch buffer. Submit batch buffers to other rings that have a write dependency to the same buffer object. Submit batch buffers with no interdependencies to all rings. Ensure the batch buffers that have write dependencies are executed in submission order but the batch buffers without interdependencies do not get held up.

---
 tests/Makefile.sources |   1 +
 tests/gem_scheduler.c  | 409 +++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 410 insertions(+)
 create mode 100644 tests/gem_scheduler.c
tests/Makefile.sources +1 -0
index df92586..439f62c 100644
@@ -66,6 +66,7 @@ TESTS_progs_M = \
 	gem_request_retire \
 	gem_reset_stats \
 	gem_ringfill \
+	gem_scheduler \
 	gem_set_tiling_vs_blt \
 	gem_softpin \
 	gem_stolen \
tests/gem_scheduler.c new file +409 -0

409 lines not on this page · raw message

Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#8 lore raw

Re: [PATCH i-g-t 2/4] tests/gem_scheduler: Add gem_scheduler test

Hi,

first round of comments inline. A few things will probably have to change based on the comments on the previous patch in the series so I'll have a better look at the related logic once the new series is up.

Regards,
Daniele

Quoted 92 lines · Derek Morton

This is intended to test the scheduler behaviour is correct.
The subtests are
<ring>-basic
Tests that batch buffers of the same priority submitted to a ring execute in the order they are submitted.
<ring>-read
Submits a batch buffer with a read dependency to a buffer object to a ring which is held in the scheduler queue by a long running batch buffer. Submit batch buffers to other rings that have a read dependency to the same buffer object. Ensure they execute before the batch buffer being held up behind the long running batch buffer.
<ring>-write
Submits a batch buffer with a write dependency to a buffer object to a ring which is held in the scheduler queue by a long running batch buffer. Submit batch buffers to other rings that have a write dependency to the same buffer object. Submit batch buffers with no interdependencies to all rings. Ensure the batch buffers that have write dependencies are executed in submission order but the batch buffers without interdependencies do not get held up.

---
  tests/Makefile.sources |   1 +
  tests/gem_scheduler.c  | 409 +++++++++++++++++++++++++++++++++++++++++++++++++
  2 files changed, 410 insertions(+)

create mode 100644 tests/gem_scheduler.c

tests/Makefile.sources +1 -0
index df92586..439f62c 100644
@@ -66,6 +66,7 @@ TESTS_progs_M = \
  	gem_request_retire \
  	gem_reset_stats \
  	gem_ringfill \
+	gem_scheduler \
  	gem_set_tiling_vs_blt \
  	gem_softpin \
  	gem_stolen \
tests/gem_scheduler.c new file +47 -0
new file mode 100644
index 0000000..4824c13
@@ -0,0 +1,409 @@
+/*
+ * Copyright © 2016 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ * Authors:
+ *    Derek Morton <[email protected]>
+ *
+ */
+
+#include "igt.h"
+#include <unistd.h>
+#include <stdlib.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <string.h>
+#include <inttypes.h>
+#include <time.h>
+#include <sys/stat.h>
+#include <sys/ioctl.h>
+#include <fcntl.h>
+
+IGT_TEST_DESCRIPTION("Check scheduler behaviour. Basic tests ensure independant "
+                     "batch buffers of the same priority are executed in "
+                     "submission order. Read-read tests ensure "
+                     "batch buffers with a read dependency to the same buffer "
+                     "object do not block each other. Write-write dependency "
+                     "tests ensure batch buffers with a write dependency to a "
+                     "buffer object will be executed in submission order but "
+                     "will not block execution of other independant batch "

tests/gem_scheduler.c line 57

Quoted 10 lines
tests/gem_scheduler.c new file +10 -0
+                     "buffers.");
+
+#define SEC_TO_NSEC (1000 * 1000 * 1000)
+
+struct ring {
+	const char *name;
+	int id;
+} rings[] = {
+	{ "render", I915_EXEC_RENDER },
+	{ "bsd",    I915_EXEC_BSD },

Is BSD1/BSD2 difference of any importance for the tests?

tests/gem_scheduler.c line 60

Quoted 3 lines
tests/gem_scheduler.c new file +3 -0
+	{ "blt",    I915_EXEC_BLT },
+	{ "vebox",  I915_EXEC_VEBOX },
+};

This is a slight duplication of intel_execution_engines. However, I'm not sure that intel_execution_engines is suitable here considering that it doesn't seem you want to check both the vanilla I915_EXEC_BSD case and the BSD1/BSD2 case

Quoted 37 lines
tests/gem_scheduler.c new file +37 -0
+
+#define NBR_RINGS (sizeof(rings)/sizeof(struct ring))
+
+/* Basic test. Check batch buffers of the same priority and with no dependencies
+ * are executed in the order they are submitted.
+ */
+#define NBR_BASIC_FDs (3)
+static void run_test_basic(int in_flight, int ringid)
+{
+	int fd[NBR_BASIC_FDs];
+	int loop;
+	drm_intel_bufmgr *bufmgr[NBR_BASIC_FDs];
+	uint32_t *delay_buf, *ts1_buf, *ts2_buf;
+	struct intel_batchbuffer *ts1_bb, *ts2_bb;
+	struct intel_batchbuffer **in_flight_bbs;
+	uint32_t calibrated_1s;
+	drm_intel_bo *delay_bo, *ts1_bo, *ts2_bo;
+
+	in_flight_bbs = malloc(in_flight * sizeof(struct intel_batchbuffer *));
+	igt_assert(in_flight_bbs);
+
+	/* Need multiple i915 fd's. Scheduler will not change execution order of
+	 * batch buffers from the same context.
+	 */
+	for(loop=0; loop < NBR_BASIC_FDs; loop++) {
+		struct intel_batchbuffer *noop_bb;
+		fd[loop] = drm_open_driver(DRIVER_INTEL);
+		igt_assert(fd[loop] >= 0);
+		bufmgr[loop] = drm_intel_bufmgr_gem_init(fd[loop], BATCH_SZ);
+		igt_assert(bufmgr[loop]);
+		drm_intel_bufmgr_gem_enable_reuse(bufmgr[loop]);
+		/* Send a noop batch buffer to force any deferred initialisation */
+		noop_bb = igt_create_noop_bb(fd[loop], bufmgr[loop], ringid, 5);
+		intel_batchbuffer_flush_on_ring(noop_bb, ringid);
+		intel_batchbuffer_free(noop_bb);
+	}
+

tests/gem_scheduler.c line 107

Quoted 10 lines
tests/gem_scheduler.c new file +10 -0
+	/* Create buffer objects */
+	delay_bo = drm_intel_bo_alloc(bufmgr[0], "delay bo", BATCH_SZ, BATCH_SZ);
+	igt_assert(delay_bo);
+	ts1_bo = drm_intel_bo_alloc(bufmgr[1], "ts1 bo", BATCH_SZ, BATCH_SZ);
+	igt_assert(ts1_bo);
+	ts2_bo = drm_intel_bo_alloc(bufmgr[2], "ts2 bo", BATCH_SZ, BATCH_SZ);
+	igt_assert(ts2_bo);
+
+	/* Put some non zero values in the delay bo */
+	drm_intel_bo_map(delay_bo, 1);

As I already mentioned on the other patch in some cases you could use a subdata/get_subdata call instead of the map/unmap dance

tests/gem_scheduler.c line 114

Quoted 7 lines
tests/gem_scheduler.c new file +7 -0
+	delay_buf = delay_bo->virtual;
+	delay_buf[0] = 0xff;
+	drm_intel_bo_unmap(delay_bo);
+
+	calibrated_1s = igt_calibrate_delay_bb(fd[0], bufmgr[0], ringid);
+
+	/* Batch buffers to fill the ring */

"fill the ring" feels a bit unclear to me, because you're not filling the ringbuffer but the in-flight queue of the scheduler. Maybe use something like "reach the maximum number of in flight batches"?

Quoted 38 lines
tests/gem_scheduler.c new file +38 -0
+	in_flight_bbs[0] = igt_create_delay_bb(fd[0], bufmgr[0], ringid, calibrated_1s, delay_bo);
+	for(loop = 1; loop < in_flight; loop++)
+		in_flight_bbs[loop] = igt_create_noop_bb(fd[0], bufmgr[0], ringid, 5);
+
+	/* Extra batch buffers in the scheduler queue */
+	ts1_bb = igt_create_timestamp_bb(fd[1], bufmgr[1], ringid, ts1_bo, NULL, false);
+	ts2_bb = igt_create_timestamp_bb(fd[2], bufmgr[2], ringid, ts2_bo, NULL, false);
+
+	/* Flush batchbuffers */
+	for(loop = 0; loop < in_flight; loop++)
+		intel_batchbuffer_flush_on_ring(in_flight_bbs[loop], ringid);
+	intel_batchbuffer_flush_on_ring(ts1_bb, ringid);
+	intel_batchbuffer_flush_on_ring(ts2_bb, ringid);
+
+	/* This will not return until the bo has finished executing */
+	drm_intel_bo_map(delay_bo, 0);
+	drm_intel_bo_map(ts1_bo, 0);
+	drm_intel_bo_map(ts2_bo, 0);
+
+	delay_buf = delay_bo->virtual;
+	ts1_buf = ts1_bo->virtual;
+	ts2_buf = ts2_bo->virtual;
+
+	igt_debug("Delay Timestamp = 0x%08" PRIx32 "\n", delay_buf[2]);
+	igt_debug("TS1 Timestamp = 0x%08" PRIx32 "\n", ts1_buf[0]);
+	igt_debug("TS2 Timestamp = 0x%08" PRIx32 "\n", ts2_buf[0]);
+
+	/* buf[0] in the target buffer should be 0 if the batch buffer completed */
+	igt_assert_f(delay_buf[0] == 0,
+	             "delay_buf[0] expected 0x0, got 0x%" PRIx32 "\n", delay_buf[0]);
+
+	igt_assert_f(igt_compare_timestamps(delay_buf[2], ts1_buf[0]),
+	             "Delay ts (0x%08" PRIx32 ") > TS1 ts (0x%08" PRIx32 ")\n",
+	             delay_buf[2], ts1_buf[0]);
+	igt_assert_f(igt_compare_timestamps(ts1_buf[0], ts2_buf[0]),
+	             "TS1 ts (0x%08" PRIx32 ") > TS2 ts (0x%08" PRIx32 ")\n",
+	             ts1_buf[0], ts2_buf[0]);
+

tests/gem_scheduler.c line 162

Quoted 10 lines
tests/gem_scheduler.c new file +10 -0
+	/* Cleanup */
+	for(loop = 0; loop < in_flight; loop++)
+		intel_batchbuffer_free(in_flight_bbs[loop]);
+	intel_batchbuffer_free(ts1_bb);
+	intel_batchbuffer_free(ts2_bb);
+
+	drm_intel_bo_unreference(delay_bo);
+	drm_intel_bo_unreference(ts1_bo);
+	drm_intel_bo_unreference(ts2_bo);
+	for(loop = 0; loop < 3; loop++) {

3 -> NBR_BASIC_FDs

Quoted 6 lines
tests/gem_scheduler.c new file +6 -0
+		drm_intel_bufmgr_destroy(bufmgr[loop]);
+		close(fd[loop]);
+	}
+	free(in_flight_bbs);
+}
+

tests/gem_scheduler.c line 178

Quoted 10 lines
tests/gem_scheduler.c new file +10 -0
+/* Dependency test.
+ * write=0, Submit batch buffers with read dependencies to all rings. Delay one
+ * with a long executing batch buffer. Check the others are not held up.
+ * write=1, Submit batch buffers with write dependencies to all rings. Delay one
+ * with a long executing batch buffer. Also submit batch buffers with no
+ * dependencies to all rings. Batch buffers with write dependencies should be
+ * executed in submission order. The batch buffers with no dependencies should
+ * not be held up.
+ */
+static void run_test_dependency(int in_flight, int ring, bool write)

This function contains several setup/cleanup loops that make the actual test logic itself a bit difficult to isolate. Maybe those could be moved to helper function to make the distinction clearer

Quoted 17 lines
tests/gem_scheduler.c new file +17 -0
+{
+	int fd[NBR_RINGS], fd2[NBR_RINGS];
+	int loop;
+	int prime_fd;
+	uint32_t *delay_buf, *ts_buf[NBR_RINGS], *ts2_buf[NBR_RINGS], *shared_buf;
+	uint32_t calibrated_1s;
+	drm_intel_bufmgr *bufmgr[NBR_RINGS], *bufmgr2[NBR_RINGS];
+	struct intel_batchbuffer *ts_bb[NBR_RINGS], *ts2_bb[NBR_RINGS], **in_flight_bbs;
+	drm_intel_bo *delay_bo, *ts_bo[NBR_RINGS], *ts2_bo[NBR_RINGS], *shared_bo[NBR_RINGS];
+
+	in_flight_bbs = malloc(in_flight * sizeof(struct intel_batchbuffer *));
+	igt_assert(in_flight_bbs);
+
+	/* Need multiple i915 fd's. Scheduler will not change execution order of
+	 * batch buffers from the same context.
+	 */
+	for(loop=0; loop < NBR_RINGS; loop++) {

tests/gem_scheduler.c line 205

Quoted 10 lines
tests/gem_scheduler.c new file +10 -0
+		struct intel_batchbuffer *noop_bb;
+		fd[loop] = drm_open_driver(DRIVER_INTEL);
+		igt_assert(fd[loop] >= 0);
+		bufmgr[loop] = drm_intel_bufmgr_gem_init(fd[loop], BATCH_SZ);
+		igt_assert(bufmgr[loop]);
+		drm_intel_bufmgr_gem_enable_reuse(bufmgr[loop]);
+		/* Send a noop batch buffer to force any deferred initialisation */
+		noop_bb = igt_create_noop_bb(fd[loop], bufmgr[loop], rings[loop].id, 5);
+		intel_batchbuffer_flush_on_ring(noop_bb, rings[loop].id);
+		intel_batchbuffer_free(noop_bb);

The fd opening code is duplicated several times in this file. Could use a static function to reduce duplication

Quoted 174 lines
tests/gem_scheduler.c new file +174 -0
+		if(write) {
+			struct intel_batchbuffer *noop_bb2;
+			fd2[loop] = drm_open_driver(DRIVER_INTEL);
+			igt_assert(fd2[loop] >= 0);
+			bufmgr2[loop] = drm_intel_bufmgr_gem_init(fd2[loop], BATCH_SZ);
+			igt_assert(bufmgr2[loop]);
+			drm_intel_bufmgr_gem_enable_reuse(bufmgr2[loop]);
+			/* Send a noop batch buffer to force any deferred initialisation */
+			noop_bb2 = igt_create_noop_bb(fd2[loop], bufmgr2[loop], rings[loop].id, 5);
+			intel_batchbuffer_flush_on_ring(noop_bb2, rings[loop].id);
+			intel_batchbuffer_free(noop_bb2);
+		}
+	}
+
+	/* Create buffer objects */
+	delay_bo = drm_intel_bo_alloc(bufmgr[ring], "delay bo", BATCH_SZ, BATCH_SZ);
+	igt_assert(delay_bo);
+	for(loop = 0; loop < NBR_RINGS; loop++) {
+		ts_bo[loop] = drm_intel_bo_alloc(bufmgr[loop], "ts bo", BATCH_SZ, BATCH_SZ);
+		igt_assert(ts_bo[loop]);
+		if(write) {
+			ts2_bo[loop] = drm_intel_bo_alloc(bufmgr2[loop], "ts bo", BATCH_SZ, BATCH_SZ);
+			igt_assert(ts2_bo[loop]);
+		}
+	}
+
+	/* Create shared buffer object */
+	shared_bo[0] = drm_intel_bo_alloc(bufmgr[0], "shared bo", BATCH_SZ, BATCH_SZ);
+	igt_assert(shared_bo[0]);
+
+	drm_intel_bo_gem_export_to_prime(shared_bo[0], &prime_fd);
+	for(loop = 1; loop < NBR_RINGS; loop++) {
+		shared_bo[loop] = drm_intel_bo_gem_create_from_prime(bufmgr[loop],
+		                                                     prime_fd, BATCH_SZ);
+		igt_assert(shared_bo[loop]);
+	}
+	close(prime_fd);
+
+	/* Put some non zero values in the delay and shared bo */
+	drm_intel_bo_map(delay_bo, 1);
+	delay_buf = delay_bo->virtual;
+	delay_buf[0] = 0xff;
+	drm_intel_bo_unmap(delay_bo);
+	drm_intel_bo_map(shared_bo[0], 1);
+	shared_buf = shared_bo[0]->virtual;
+	shared_buf[0] = 0xff00ff00;
+	drm_intel_bo_unmap(shared_bo[0]);
+
+	calibrated_1s = igt_calibrate_delay_bb(fd[ring], bufmgr[ring], rings[ring].id);
+
+	/* Batch buffers to fill the ring */
+	in_flight_bbs[0] = igt_create_delay_bb(fd[ring], bufmgr[ring],
+	                                       rings[ring].id, calibrated_1s, delay_bo);
+	for(loop = 1; loop < in_flight; loop++)
+		in_flight_bbs[loop] = igt_create_noop_bb(fd[ring], bufmgr[ring],
+		                                         rings[ring].id, 5);
+
+	for(loop = 0; loop < NBR_RINGS; loop++) {
+		ts_bb[loop] = igt_create_timestamp_bb(fd[loop], bufmgr[loop],
+		                  rings[loop].id, ts_bo[loop], shared_bo[loop], write);
+		if(write)
+			ts2_bb[loop] = igt_create_timestamp_bb(fd2[loop], bufmgr2[loop],
+			                   rings[loop].id, ts2_bo[loop], NULL, false);
+	}
+
+	/* Flush batchbuffers */
+	for(loop = 0; loop < in_flight; loop++)
+		intel_batchbuffer_flush_on_ring(in_flight_bbs[loop], rings[ring].id);
+
+	intel_batchbuffer_flush_on_ring(ts_bb[ring], rings[ring].id);
+	for(loop = 0; loop < NBR_RINGS; loop++)
+		if(loop != ring)
+			intel_batchbuffer_flush_on_ring(ts_bb[loop], rings[loop].id);
+
+	if(write) {
+		intel_batchbuffer_flush_on_ring(ts2_bb[ring], rings[ring].id);
+		for(loop = 0; loop < NBR_RINGS; loop++)
+			if(loop != ring)
+				intel_batchbuffer_flush_on_ring(ts2_bb[loop], rings[loop].id);
+	}
+
+	/* This will not return until the bo has finished executing */
+	drm_intel_bo_map(delay_bo, 0);
+	delay_buf = delay_bo->virtual;
+	for(loop = 0; loop < NBR_RINGS; loop++) {
+		drm_intel_bo_map(ts_bo[loop], 0);
+		ts_buf[loop] = ts_bo[loop]->virtual;
+		if(write) {
+			drm_intel_bo_map(ts2_bo[loop], 0);
+			ts2_buf[loop] = ts2_bo[loop]->virtual;
+		}
+	}
+
+	/* buf[0] in the target buffer should be 0 if the batch buffer completed */
+	igt_assert_f(delay_buf[0] == 0,
+	             "delay_buf[0] expected 0x0, got 0x%" PRIx32 "\n",
+	             delay_buf[0]);
+
+	igt_debug("%6s delay timestamp = 0x%08" PRIx32 "\n",
+	          rings[ring].name, delay_buf[2]);
+	for(loop = 0; loop < NBR_RINGS; loop++)
+		igt_debug("%6s batch timestamp = 0x%08" PRIx32 "\n",
+		          rings[loop].name, ts_buf[loop][0]);
+
+	if(write) {
+		igt_debug("Independant batch buffers\n");
+		for(loop = 0; loop < NBR_RINGS; loop++)
+			igt_debug("%6s batch timestamp = 0x%08" PRIx32 "\n",
+			          rings[loop].name, ts2_buf[loop][0]);
+	}
+
+	for(loop = 0; loop < NBR_RINGS; loop++) {
+		if(loop != ring) {
+			if(write) {
+				/* Write dependency, delayed ring should run first */
+				igt_assert_f(igt_compare_timestamps(ts_buf[ring][0], ts_buf[loop][0]),
+				             "%s ran before %s - 0x%08" PRIx32 " vs 0x%08" PRIx32 "\n",
+				             rings[loop].name, rings[ring].name,
+				             ts_buf[loop][0], ts_buf[ring][0]);
+				/* Second bb without dependency should run first */
+				igt_assert_f(igt_compare_timestamps(ts2_buf[loop][0], ts_buf[loop][0]),
+				             "(%s) independant bb was held up - 0x%08" PRIx32 " vs 0x%08" PRIx32 "\n",
+				             rings[loop].name, ts_buf[loop][0], ts2_buf[loop][0]);
+			}
+			else
+				/* Read dependency, delayed ring should run last */
+				igt_assert_f(igt_compare_timestamps(ts_buf[loop][0], ts_buf[ring][0]),
+				             "%s ran after %s - 0x%08" PRIx32 " vs 0x%08" PRIx32 "\n",
+				             rings[loop].name, rings[ring].name,
+				             ts_buf[loop][0], ts_buf[ring][0]);
+		}
+	}
+
+	/* Cleanup */
+	for(loop = 0; loop < in_flight; loop++)
+		intel_batchbuffer_free(in_flight_bbs[loop]);
+
+	for(loop = 0; loop < NBR_RINGS; loop++) {
+		intel_batchbuffer_free(ts_bb[loop]);
+		drm_intel_bo_unreference(ts_bo[loop]);
+		drm_intel_bo_unreference(shared_bo[loop]);
+		if(write) {
+			intel_batchbuffer_free(ts2_bb[loop]);
+			drm_intel_bo_unreference(ts2_bo[loop]);
+		}
+	}
+
+	drm_intel_bo_unreference(delay_bo);
+
+	for(loop = 0; loop < NBR_RINGS; loop++) {
+		drm_intel_bufmgr_destroy(bufmgr[loop]);
+		close(fd[loop]);
+		if(write) {
+			drm_intel_bufmgr_destroy(bufmgr2[loop]);
+			close(fd2[loop]);
+		}
+	}
+
+	free(in_flight_bbs);
+}
+
+igt_main
+{
+	int loop;
+	int in_flight;
+
+	igt_fixture {
+		int debug_fd;
+		int l;
+		char buf[6];
+		/* Get nbr of batch buffers that the scheduler will queue in the
+		 * HW. If this debugfs file does not exist there is no scheduler
+		 * so skip the test.
+		 */

tests/gem_scheduler.c line 389

Quoted 10 lines
tests/gem_scheduler.c new file +10 -0
+		debug_fd = igt_debugfs_open("i915_scheduler_min_flying", O_RDONLY);
+		igt_skip_on(debug_fd == -1);
+		l = read(debug_fd, buf, sizeof(buf)-1);
+		igt_assert(l > 0);
+		igt_assert(l < sizeof(buf));
+		buf[l] = '\0';
+		/* May be a decimal or hex number depending on sheduler version */
+		if(sscanf(buf, "0x%2x", &in_flight) != 1)
+			igt_assert_f(sscanf(buf, "%2d", &in_flight) == 1,
+			             "Error reading from i915_scheduler_min_flying\n");

This will probably stabilize before the scheduler is merged, so the final version should probably have only 1 sscanf call

Quoted 10 lines
tests/gem_scheduler.c new file +10 -0
+		close(debug_fd);
+		igt_debug("in flight = %d\n", in_flight);
+	}
+
+	for (loop=0; loop < NBR_RINGS; loop++)
+		igt_subtest_f("%s-basic", rings[loop].name) {
+			run_test_basic(in_flight, rings[loop].id);
+		}
+
+	for (loop=0; loop < NBR_RINGS; loop++)

tests/gem_scheduler.c line 409

Quoted 10 lines
tests/gem_scheduler.c new file +10 -0
+		igt_subtest_f("%s-read", rings[loop].name) {
+			run_test_dependency(in_flight, loop, false);
+		}
+
+	for (loop=0; loop < NBR_RINGS; loop++)
+		igt_subtest_f("%s-write", rings[loop].name) {
+			run_test_dependency(in_flight, loop, true);
+		}
+
+}

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#9 lore raw

Re: [PATCH i-g-t 2/4] tests/gem_scheduler: Add gem_scheduler test

Quoted 134 lines

-----Original Message-----
From: Ceraolo Spurio, Daniele
Sent: Wednesday, February 17, 2016 12:37 PM
To: Morton, Derek J <[email protected]>; [email protected]
Subject: Re: [Intel-gfx] [PATCH i-g-t 2/4] tests/gem_scheduler: Add gem_scheduler test

Hi,

first round of comments inline. A few things will probably have to change based on the comments on the previous patch in the series so I'll have a better look at the related logic once the new series is up.

Regards,
Daniele

Quoted 104 lines · Derek Morton

This is intended to test the scheduler behaviour is correct. The subtests are
<ring>-basic
Tests that batch buffers of the same priority submitted to a ring execute in the order they are submitted.
<ring>-read
Submits a batch buffer with a read dependency to a buffer object to a ring which is held in the scheduler queue by a long running batch buffer. Submit batch buffers to other rings that have a read dependency to the same buffer object. Ensure they execute before the batch buffer being held up behind the long running batch buffer. <ring>-write
Submits a batch buffer with a write dependency to a buffer object to a ring which is held in the scheduler queue by a long running batch buffer. Submit batch buffers to other rings that have a write dependency to the same buffer object. Submit batch buffers with no interdependencies to all rings. Ensure the batch buffers that have write dependencies are executed in submission order but the batch buffers without interdependencies do not get held up.

---
  tests/Makefile.sources |   1 +
  tests/gem_scheduler.c  | 409 +++++++++++++++++++++++++++++++++++++++++++++++++
  2 files changed, 410 insertions(+)

create mode 100644 tests/gem_scheduler.c

tests/Makefile.sources index renamed from tests/Makefile.sources +0 -0

df92586..439f62c 100644

tests/Makefile.sources +1 -0
@@ -66,6 +66,7 @@ TESTS_progs_M = \
  	gem_request_retire \
  	gem_reset_stats \
  	gem_ringfill \
+	gem_scheduler \
  	gem_set_tiling_vs_blt \
  	gem_softpin \
  	gem_stolen \
tests/gem_scheduler.c new file renamed from tests/gem_scheduler.c +0 -0

mode 100644 index 0000000..4824c13

tests/gem_scheduler.c new file +60 -0
@@ -0,0 +1,409 @@
+/*
+ * Copyright © 2016 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person 
+obtaining a
+ * copy of this software and associated documentation files (the 
+"Software"),
+ * to deal in the Software without restriction, including without 
+limitation
+ * the rights to use, copy, modify, merge, publish, distribute, 
+sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom 
+the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including 
+the next
+ * paragraph) shall be included in all copies or substantial portions 
+of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 
+EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF 
+MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT 
+SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES 
+OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, 
+ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 
+OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ * Authors:
+ *    Derek Morton <[email protected]>
+ *
+ */
+
+#include "igt.h"
+#include <unistd.h>
+#include <stdlib.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <string.h>
+#include <inttypes.h>
+#include <time.h>
+#include <sys/stat.h>
+#include <sys/ioctl.h>
+#include <fcntl.h>
+
+IGT_TEST_DESCRIPTION("Check scheduler behaviour. Basic tests ensure independant "
+                     "batch buffers of the same priority are executed in "
+                     "submission order. Read-read tests ensure "
+                     "batch buffers with a read dependency to the same buffer "
+                     "object do not block each other. Write-write dependency "
+                     "tests ensure batch buffers with a write dependency to a "
+                     "buffer object will be executed in submission order but "
+                     "will not block execution of other independant batch "

tests/gem_scheduler.c line 70

Quoted 10 lines
tests/gem_scheduler.c new file +10 -0
+                     "buffers.");
+
+#define SEC_TO_NSEC (1000 * 1000 * 1000)
+
+struct ring {
+	const char *name;
+	int id;
+} rings[] = {
+	{ "render", I915_EXEC_RENDER },
+	{ "bsd",    I915_EXEC_BSD },

Is BSD1/BSD2 difference of any importance for the tests?

Quoted 5 lines

tests/gem_scheduler.c line 60

Quoted 3 lines
tests/gem_scheduler.c new file +3 -0
+	{ "blt",    I915_EXEC_BLT },
+	{ "vebox",  I915_EXEC_VEBOX },
+};

This is a slight duplication of intel_execution_engines. However, I'm not sure that intel_execution_engines is suitable here considering that it doesn't seem you want to check both the vanilla I915_EXEC_BSD case and the BSD1/BSD2 case

Hmm. If there is more than 1 BSD ring the test will fail as the in flight queue will not be filled correctly if submitted batch buffers are shared over 2 rings. intel_execution_engines is not appropriate here either because it has BSD BSD1 and BSD2 as separate rings. I would need to use BSD or BSD1 and BSD2. Will need to think about how to handle that efficiently.

Quoted 42 lines
Quoted 42 lines
tests/gem_scheduler.c new file +41 -0
+
+#define NBR_RINGS (sizeof(rings)/sizeof(struct ring))
+
+/* Basic test. Check batch buffers of the same priority and with no 
+dependencies
+ * are executed in the order they are submitted.
+ */
+#define NBR_BASIC_FDs (3)
+static void run_test_basic(int in_flight, int ringid) {
+	int fd[NBR_BASIC_FDs];
+	int loop;
+	drm_intel_bufmgr *bufmgr[NBR_BASIC_FDs];
+	uint32_t *delay_buf, *ts1_buf, *ts2_buf;
+	struct intel_batchbuffer *ts1_bb, *ts2_bb;
+	struct intel_batchbuffer **in_flight_bbs;
+	uint32_t calibrated_1s;
+	drm_intel_bo *delay_bo, *ts1_bo, *ts2_bo;
+
+	in_flight_bbs = malloc(in_flight * sizeof(struct intel_batchbuffer *));
+	igt_assert(in_flight_bbs);
+
+	/* Need multiple i915 fd's. Scheduler will not change execution order of
+	 * batch buffers from the same context.
+	 */
+	for(loop=0; loop < NBR_BASIC_FDs; loop++) {
+		struct intel_batchbuffer *noop_bb;
+		fd[loop] = drm_open_driver(DRIVER_INTEL);
+		igt_assert(fd[loop] >= 0);
+		bufmgr[loop] = drm_intel_bufmgr_gem_init(fd[loop], BATCH_SZ);
+		igt_assert(bufmgr[loop]);
+		drm_intel_bufmgr_gem_enable_reuse(bufmgr[loop]);
+		/* Send a noop batch buffer to force any deferred initialisation */
+		noop_bb = igt_create_noop_bb(fd[loop], bufmgr[loop], ringid, 5);
+		intel_batchbuffer_flush_on_ring(noop_bb, ringid);
+		intel_batchbuffer_free(noop_bb);
+	}
+
+	/* Create buffer objects */
+	delay_bo = drm_intel_bo_alloc(bufmgr[0], "delay bo", BATCH_SZ, BATCH_SZ);
+	igt_assert(delay_bo);
+	ts1_bo = drm_intel_bo_alloc(bufmgr[1], "ts1 bo", BATCH_SZ, BATCH_SZ);
Quoted 8 lines

tests/gem_scheduler.c line 107

Quoted 6 lines
tests/gem_scheduler.c new file +6 -0
+	igt_assert(ts1_bo);
+	ts2_bo = drm_intel_bo_alloc(bufmgr[2], "ts2 bo", BATCH_SZ, BATCH_SZ);
+	igt_assert(ts2_bo);
+
+	/* Put some non zero values in the delay bo */
+	drm_intel_bo_map(delay_bo, 1);

As I already mentioned on the other patch in some cases you could use a subdata/get_subdata call instead of the map/unmap dance

Can change to using get_subdata here. I will leave the bo_map calls further on as more is done with those buffers.

Quoted 10 lines

tests/gem_scheduler.c line 114

Quoted 8 lines
tests/gem_scheduler.c new file +7 -0
+	delay_buf = delay_bo->virtual;
+	delay_buf[0] = 0xff;
+	drm_intel_bo_unmap(delay_bo);
+
+	calibrated_1s = igt_calibrate_delay_bb(fd[0], bufmgr[0], ringid);
+
+	/* Batch buffers to fill the ring */

"fill the ring" feels a bit unclear to me, because you're not filling the ringbuffer but the in-flight queue of the scheduler. Maybe use something like "reach the maximum number of in flight batches"?

Will change ring to in flight queue

Quoted 46 lines
Quoted 46 lines
tests/gem_scheduler.c new file +45 -0
+	in_flight_bbs[0] = igt_create_delay_bb(fd[0], bufmgr[0], ringid, calibrated_1s, delay_bo);
+	for(loop = 1; loop < in_flight; loop++)
+		in_flight_bbs[loop] = igt_create_noop_bb(fd[0], bufmgr[0], ringid, 
+5);
+
+	/* Extra batch buffers in the scheduler queue */
+	ts1_bb = igt_create_timestamp_bb(fd[1], bufmgr[1], ringid, ts1_bo, NULL, false);
+	ts2_bb = igt_create_timestamp_bb(fd[2], bufmgr[2], ringid, ts2_bo, 
+NULL, false);
+
+	/* Flush batchbuffers */
+	for(loop = 0; loop < in_flight; loop++)
+		intel_batchbuffer_flush_on_ring(in_flight_bbs[loop], ringid);
+	intel_batchbuffer_flush_on_ring(ts1_bb, ringid);
+	intel_batchbuffer_flush_on_ring(ts2_bb, ringid);
+
+	/* This will not return until the bo has finished executing */
+	drm_intel_bo_map(delay_bo, 0);
+	drm_intel_bo_map(ts1_bo, 0);
+	drm_intel_bo_map(ts2_bo, 0);
+
+	delay_buf = delay_bo->virtual;
+	ts1_buf = ts1_bo->virtual;
+	ts2_buf = ts2_bo->virtual;
+
+	igt_debug("Delay Timestamp = 0x%08" PRIx32 "\n", delay_buf[2]);
+	igt_debug("TS1 Timestamp = 0x%08" PRIx32 "\n", ts1_buf[0]);
+	igt_debug("TS2 Timestamp = 0x%08" PRIx32 "\n", ts2_buf[0]);
+
+	/* buf[0] in the target buffer should be 0 if the batch buffer completed */
+	igt_assert_f(delay_buf[0] == 0,
+	             "delay_buf[0] expected 0x0, got 0x%" PRIx32 "\n", 
+delay_buf[0]);
+
+	igt_assert_f(igt_compare_timestamps(delay_buf[2], ts1_buf[0]),
+	             "Delay ts (0x%08" PRIx32 ") > TS1 ts (0x%08" PRIx32 ")\n",
+	             delay_buf[2], ts1_buf[0]);
+	igt_assert_f(igt_compare_timestamps(ts1_buf[0], ts2_buf[0]),
+	             "TS1 ts (0x%08" PRIx32 ") > TS2 ts (0x%08" PRIx32 ")\n",
+	             ts1_buf[0], ts2_buf[0]);
+
+	/* Cleanup */
+	for(loop = 0; loop < in_flight; loop++)
+		intel_batchbuffer_free(in_flight_bbs[loop]);
+	intel_batchbuffer_free(ts1_bb);
Quoted 8 lines

tests/gem_scheduler.c line 162

Quoted 6 lines
tests/gem_scheduler.c new file +6 -0
+	intel_batchbuffer_free(ts2_bb);
+
+	drm_intel_bo_unreference(delay_bo);
+	drm_intel_bo_unreference(ts1_bo);
+	drm_intel_bo_unreference(ts2_bo);
+	for(loop = 0; loop < 3; loop++) {

3 -> NBR_BASIC_FDs

I missed that one....

Quoted 16 lines
Quoted 16 lines
tests/gem_scheduler.c new file +15 -0
+		drm_intel_bufmgr_destroy(bufmgr[loop]);
+		close(fd[loop]);
+	}
+	free(in_flight_bbs);
+}
+
+/* Dependency test.
+ * write=0, Submit batch buffers with read dependencies to all rings. 
+Delay one
+ * with a long executing batch buffer. Check the others are not held up.
+ * write=1, Submit batch buffers with write dependencies to all 
+rings. Delay one
+ * with a long executing batch buffer. Also submit batch buffers with 
+no
+ * dependencies to all rings. Batch buffers with write dependencies 
Quoted 8 lines

tests/gem_scheduler.c line 178

Quoted 6 lines
tests/gem_scheduler.c new file +6 -0
+should be
+ * executed in submission order. The batch buffers with no 
+dependencies should
+ * not be held up.
+ */
+static void run_test_dependency(int in_flight, int ring, bool write)

This function contains several setup/cleanup loops that make the actual test logic itself a bit difficult to isolate. Maybe those could be moved to helper function to make the distinction clearer

Ok

Quoted 23 lines
Quoted 23 lines
tests/gem_scheduler.c new file +22 -0
+{
+	int fd[NBR_RINGS], fd2[NBR_RINGS];
+	int loop;
+	int prime_fd;
+	uint32_t *delay_buf, *ts_buf[NBR_RINGS], *ts2_buf[NBR_RINGS], *shared_buf;
+	uint32_t calibrated_1s;
+	drm_intel_bufmgr *bufmgr[NBR_RINGS], *bufmgr2[NBR_RINGS];
+	struct intel_batchbuffer *ts_bb[NBR_RINGS], *ts2_bb[NBR_RINGS], **in_flight_bbs;
+	drm_intel_bo *delay_bo, *ts_bo[NBR_RINGS], *ts2_bo[NBR_RINGS], 
+*shared_bo[NBR_RINGS];
+
+	in_flight_bbs = malloc(in_flight * sizeof(struct intel_batchbuffer *));
+	igt_assert(in_flight_bbs);
+
+	/* Need multiple i915 fd's. Scheduler will not change execution order of
+	 * batch buffers from the same context.
+	 */
+	for(loop=0; loop < NBR_RINGS; loop++) {
+		struct intel_batchbuffer *noop_bb;
+		fd[loop] = drm_open_driver(DRIVER_INTEL);
+		igt_assert(fd[loop] >= 0);
+		bufmgr[loop] = drm_intel_bufmgr_gem_init(fd[loop], BATCH_SZ);
Quoted 8 lines

tests/gem_scheduler.c line 205

Quoted 6 lines
tests/gem_scheduler.c new file +6 -0
+		igt_assert(bufmgr[loop]);
+		drm_intel_bufmgr_gem_enable_reuse(bufmgr[loop]);
+		/* Send a noop batch buffer to force any deferred initialisation */
+		noop_bb = igt_create_noop_bb(fd[loop], bufmgr[loop], rings[loop].id, 5);
+		intel_batchbuffer_flush_on_ring(noop_bb, rings[loop].id);
+		intel_batchbuffer_free(noop_bb);

The fd opening code is duplicated several times in this file. Could use a static function to reduce duplication

Ok

Quoted 181 lines
Quoted 181 lines
tests/gem_scheduler.c new file +180 -0
+		if(write) {
+			struct intel_batchbuffer *noop_bb2;
+			fd2[loop] = drm_open_driver(DRIVER_INTEL);
+			igt_assert(fd2[loop] >= 0);
+			bufmgr2[loop] = drm_intel_bufmgr_gem_init(fd2[loop], BATCH_SZ);
+			igt_assert(bufmgr2[loop]);
+			drm_intel_bufmgr_gem_enable_reuse(bufmgr2[loop]);
+			/* Send a noop batch buffer to force any deferred initialisation */
+			noop_bb2 = igt_create_noop_bb(fd2[loop], bufmgr2[loop], rings[loop].id, 5);
+			intel_batchbuffer_flush_on_ring(noop_bb2, rings[loop].id);
+			intel_batchbuffer_free(noop_bb2);
+		}
+	}
+
+	/* Create buffer objects */
+	delay_bo = drm_intel_bo_alloc(bufmgr[ring], "delay bo", BATCH_SZ, BATCH_SZ);
+	igt_assert(delay_bo);
+	for(loop = 0; loop < NBR_RINGS; loop++) {
+		ts_bo[loop] = drm_intel_bo_alloc(bufmgr[loop], "ts bo", BATCH_SZ, BATCH_SZ);
+		igt_assert(ts_bo[loop]);
+		if(write) {
+			ts2_bo[loop] = drm_intel_bo_alloc(bufmgr2[loop], "ts bo", BATCH_SZ, BATCH_SZ);
+			igt_assert(ts2_bo[loop]);
+		}
+	}
+
+	/* Create shared buffer object */
+	shared_bo[0] = drm_intel_bo_alloc(bufmgr[0], "shared bo", BATCH_SZ, BATCH_SZ);
+	igt_assert(shared_bo[0]);
+
+	drm_intel_bo_gem_export_to_prime(shared_bo[0], &prime_fd);
+	for(loop = 1; loop < NBR_RINGS; loop++) {
+		shared_bo[loop] = drm_intel_bo_gem_create_from_prime(bufmgr[loop],
+		                                                     prime_fd, BATCH_SZ);
+		igt_assert(shared_bo[loop]);
+	}
+	close(prime_fd);
+
+	/* Put some non zero values in the delay and shared bo */
+	drm_intel_bo_map(delay_bo, 1);
+	delay_buf = delay_bo->virtual;
+	delay_buf[0] = 0xff;
+	drm_intel_bo_unmap(delay_bo);
+	drm_intel_bo_map(shared_bo[0], 1);
+	shared_buf = shared_bo[0]->virtual;
+	shared_buf[0] = 0xff00ff00;
+	drm_intel_bo_unmap(shared_bo[0]);
+
+	calibrated_1s = igt_calibrate_delay_bb(fd[ring], bufmgr[ring], 
+rings[ring].id);
+
+	/* Batch buffers to fill the ring */
+	in_flight_bbs[0] = igt_create_delay_bb(fd[ring], bufmgr[ring],
+	                                       rings[ring].id, calibrated_1s, delay_bo);
+	for(loop = 1; loop < in_flight; loop++)
+		in_flight_bbs[loop] = igt_create_noop_bb(fd[ring], bufmgr[ring],
+		                                         rings[ring].id, 5);
+
+	for(loop = 0; loop < NBR_RINGS; loop++) {
+		ts_bb[loop] = igt_create_timestamp_bb(fd[loop], bufmgr[loop],
+		                  rings[loop].id, ts_bo[loop], shared_bo[loop], write);
+		if(write)
+			ts2_bb[loop] = igt_create_timestamp_bb(fd2[loop], bufmgr2[loop],
+			                   rings[loop].id, ts2_bo[loop], NULL, false);
+	}
+
+	/* Flush batchbuffers */
+	for(loop = 0; loop < in_flight; loop++)
+		intel_batchbuffer_flush_on_ring(in_flight_bbs[loop], 
+rings[ring].id);
+
+	intel_batchbuffer_flush_on_ring(ts_bb[ring], rings[ring].id);
+	for(loop = 0; loop < NBR_RINGS; loop++)
+		if(loop != ring)
+			intel_batchbuffer_flush_on_ring(ts_bb[loop], rings[loop].id);
+
+	if(write) {
+		intel_batchbuffer_flush_on_ring(ts2_bb[ring], rings[ring].id);
+		for(loop = 0; loop < NBR_RINGS; loop++)
+			if(loop != ring)
+				intel_batchbuffer_flush_on_ring(ts2_bb[loop], rings[loop].id);
+	}
+
+	/* This will not return until the bo has finished executing */
+	drm_intel_bo_map(delay_bo, 0);
+	delay_buf = delay_bo->virtual;
+	for(loop = 0; loop < NBR_RINGS; loop++) {
+		drm_intel_bo_map(ts_bo[loop], 0);
+		ts_buf[loop] = ts_bo[loop]->virtual;
+		if(write) {
+			drm_intel_bo_map(ts2_bo[loop], 0);
+			ts2_buf[loop] = ts2_bo[loop]->virtual;
+		}
+	}
+
+	/* buf[0] in the target buffer should be 0 if the batch buffer completed */
+	igt_assert_f(delay_buf[0] == 0,
+	             "delay_buf[0] expected 0x0, got 0x%" PRIx32 "\n",
+	             delay_buf[0]);
+
+	igt_debug("%6s delay timestamp = 0x%08" PRIx32 "\n",
+	          rings[ring].name, delay_buf[2]);
+	for(loop = 0; loop < NBR_RINGS; loop++)
+		igt_debug("%6s batch timestamp = 0x%08" PRIx32 "\n",
+		          rings[loop].name, ts_buf[loop][0]);
+
+	if(write) {
+		igt_debug("Independant batch buffers\n");
+		for(loop = 0; loop < NBR_RINGS; loop++)
+			igt_debug("%6s batch timestamp = 0x%08" PRIx32 "\n",
+			          rings[loop].name, ts2_buf[loop][0]);
+	}
+
+	for(loop = 0; loop < NBR_RINGS; loop++) {
+		if(loop != ring) {
+			if(write) {
+				/* Write dependency, delayed ring should run first */
+				igt_assert_f(igt_compare_timestamps(ts_buf[ring][0], ts_buf[loop][0]),
+				             "%s ran before %s - 0x%08" PRIx32 " vs 0x%08" PRIx32 "\n",
+				             rings[loop].name, rings[ring].name,
+				             ts_buf[loop][0], ts_buf[ring][0]);
+				/* Second bb without dependency should run first */
+				igt_assert_f(igt_compare_timestamps(ts2_buf[loop][0], ts_buf[loop][0]),
+				             "(%s) independant bb was held up - 0x%08" PRIx32 " vs 0x%08" PRIx32 "\n",
+				             rings[loop].name, ts_buf[loop][0], ts2_buf[loop][0]);
+			}
+			else
+				/* Read dependency, delayed ring should run last */
+				igt_assert_f(igt_compare_timestamps(ts_buf[loop][0], ts_buf[ring][0]),
+				             "%s ran after %s - 0x%08" PRIx32 " vs 0x%08" PRIx32 "\n",
+				             rings[loop].name, rings[ring].name,
+				             ts_buf[loop][0], ts_buf[ring][0]);
+		}
+	}
+
+	/* Cleanup */
+	for(loop = 0; loop < in_flight; loop++)
+		intel_batchbuffer_free(in_flight_bbs[loop]);
+
+	for(loop = 0; loop < NBR_RINGS; loop++) {
+		intel_batchbuffer_free(ts_bb[loop]);
+		drm_intel_bo_unreference(ts_bo[loop]);
+		drm_intel_bo_unreference(shared_bo[loop]);
+		if(write) {
+			intel_batchbuffer_free(ts2_bb[loop]);
+			drm_intel_bo_unreference(ts2_bo[loop]);
+		}
+	}
+
+	drm_intel_bo_unreference(delay_bo);
+
+	for(loop = 0; loop < NBR_RINGS; loop++) {
+		drm_intel_bufmgr_destroy(bufmgr[loop]);
+		close(fd[loop]);
+		if(write) {
+			drm_intel_bufmgr_destroy(bufmgr2[loop]);
+			close(fd2[loop]);
+		}
+	}
+
+	free(in_flight_bbs);
+}
+
+igt_main
+{
+	int loop;
+	int in_flight;
+
+	igt_fixture {
+		int debug_fd;
+		int l;
+		char buf[6];
+		/* Get nbr of batch buffers that the scheduler will queue in the
+		 * HW. If this debugfs file does not exist there is no scheduler
+		 * so skip the test.
+		 */
+		debug_fd = igt_debugfs_open("i915_scheduler_min_flying", O_RDONLY);
+		igt_skip_on(debug_fd == -1);
+		l = read(debug_fd, buf, sizeof(buf)-1);
+		igt_assert(l > 0);
Quoted 8 lines

tests/gem_scheduler.c line 389

Quoted 6 lines
tests/gem_scheduler.c new file +6 -0
+		igt_assert(l < sizeof(buf));
+		buf[l] = '\0';
+		/* May be a decimal or hex number depending on sheduler version */
+		if(sscanf(buf, "0x%2x", &in_flight) != 1)
+			igt_assert_f(sscanf(buf, "%2d", &in_flight) == 1,
+			             "Error reading from i915_scheduler_min_flying\n");

This will probably stabilize before the scheduler is merged, so the final version should probably have only 1 sscanf call

I will leave it as is for now.

Quoted 13 lines
Quoted 13 lines
tests/gem_scheduler.c new file +12 -0
+		close(debug_fd);
+		igt_debug("in flight = %d\n", in_flight);
+	}
+
+	for (loop=0; loop < NBR_RINGS; loop++)
+		igt_subtest_f("%s-basic", rings[loop].name) {
+			run_test_basic(in_flight, rings[loop].id);
+		}
+
+	for (loop=0; loop < NBR_RINGS; loop++)
+		igt_subtest_f("%s-read", rings[loop].name) {
+			run_test_dependency(in_flight, loop, false);
Quoted 10 lines

tests/gem_scheduler.c line 409

Quoted 8 lines
tests/gem_scheduler.c new file +8 -0
+		}
+
+	for (loop=0; loop < NBR_RINGS; loop++)
+		igt_subtest_f("%s-write", rings[loop].name) {
+			run_test_dependency(in_flight, loop, true);
+		}
+
+}

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#10 lore raw

PATCH 3/4 igt/gem_ctx_param_basic: Updated to support scheduler priority interface

In reply to Derek Morton

From: John Harrison <[email protected]>

The GPU scheduler has added an execution priority level to the context object. There is an IOCTL interface to allow user apps/libraries to set this priority. This patch updates the context paramter IOCTL test to include the new interface.

For: VIZ-1587

---
 lib/ioctl_wrappers.h        |  1 +
 tests/gem_ctx_param_basic.c | 34 +++++++++++++++++++++++++++++++++-
 2 files changed, 34 insertions(+), 1 deletion(-)
lib/ioctl_wrappers.h +1 -0
index 4d913c5..f1ef739 100644
@@ -106,6 +106,7 @@ struct local_i915_gem_context_param {
 #define LOCAL_CONTEXT_PARAM_BAN_PERIOD	0x1
 #define LOCAL_CONTEXT_PARAM_NO_ZEROMAP	0x2
 #define LOCAL_CONTEXT_PARAM_GTT_SIZE	0x3
+#define LOCAL_CONTEXT_PARAM_PRIORITY	0x4
 	uint64_t value;
 };
 void gem_context_require_ban_period(int fd);
tests/gem_ctx_param_basic.c +33 -1
index b75800c..585a1a8 100644
@@ -147,10 +147,42 @@ igt_main
 		TEST_SUCCESS(LOCAL_IOCTL_I915_GEM_CONTEXT_SETPARAM);
 	}
 
+	ctx_param.param = LOCAL_CONTEXT_PARAM_PRIORITY;
+
+	igt_subtest("priority-root-set") {
+		ctx_param.context = ctx;
+		ctx_param.value = 2048;
+		TEST_FAIL(LOCAL_IOCTL_I915_GEM_CONTEXT_SETPARAM, EINVAL);
+		ctx_param.value = -2048;
+		TEST_FAIL(LOCAL_IOCTL_I915_GEM_CONTEXT_SETPARAM, EINVAL);
+		ctx_param.value = 512;
+		TEST_SUCCESS(LOCAL_IOCTL_I915_GEM_CONTEXT_SETPARAM);
+		ctx_param.value = -512;
+		TEST_SUCCESS(LOCAL_IOCTL_I915_GEM_CONTEXT_SETPARAM);
+		ctx_param.value = 0;
+		TEST_SUCCESS(LOCAL_IOCTL_I915_GEM_CONTEXT_SETPARAM);
+	}
+
+	igt_subtest("priority-non-root-set") {
+		igt_fork(child, 1) {
+			igt_drop_root();
+
+			ctx_param.context = ctx;
+			ctx_param.value = 512;
+			TEST_FAIL(LOCAL_IOCTL_I915_GEM_CONTEXT_SETPARAM, EPERM);
+			ctx_param.value = -512;
+			TEST_SUCCESS(LOCAL_IOCTL_I915_GEM_CONTEXT_SETPARAM);
+			ctx_param.value = 0;
+			TEST_SUCCESS(LOCAL_IOCTL_I915_GEM_CONTEXT_SETPARAM);
+		}
+
+		igt_waitchildren();
+	}
+
 	/* NOTE: This testcase intentionally tests for the next free parameter
 	 * to catch ABI extensions. Don't "fix" this testcase without adding all
 	 * the tests for the new param first. */
-	ctx_param.param = LOCAL_CONTEXT_PARAM_GTT_SIZE + 1;
+	ctx_param.param = LOCAL_CONTEXT_PARAM_PRIORITY + 1;
 
 	igt_subtest("invalid-param-get") {
 		ctx_param.context = ctx;
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Reviewed-by on v1 3/4
#11 lore raw

Re: [PATCH i-g-t 3/4] igt/gem_ctx_param_basic: Updated to support scheduler priority interface

Quoted 36 lines · Derek Morton

From: John Harrison <[email protected]>

The GPU scheduler has added an execution priority level to the context object. There is an IOCTL interface to allow user apps/libraries to set this priority. This patch updates the context paramter IOCTL test to include the new interface.

For: VIZ-1587

---
  lib/ioctl_wrappers.h        |  1 +
  tests/gem_ctx_param_basic.c | 34 +++++++++++++++++++++++++++++++++-
  2 files changed, 34 insertions(+), 1 deletion(-)
lib/ioctl_wrappers.h +1 -0
index 4d913c5..f1ef739 100644
@@ -106,6 +106,7 @@ struct local_i915_gem_context_param {
  #define LOCAL_CONTEXT_PARAM_BAN_PERIOD	0x1
  #define LOCAL_CONTEXT_PARAM_NO_ZEROMAP	0x2
  #define LOCAL_CONTEXT_PARAM_GTT_SIZE	0x3
+#define LOCAL_CONTEXT_PARAM_PRIORITY	0x4
  	uint64_t value;
  };
  void gem_context_require_ban_period(int fd);
tests/gem_ctx_param_basic.c +2 -0
index b75800c..585a1a8 100644
@@ -147,10 +147,42 @@ igt_main
  		TEST_SUCCESS(LOCAL_IOCTL_I915_GEM_CONTEXT_SETPARAM);
  	}
 
+	ctx_param.param = LOCAL_CONTEXT_PARAM_PRIORITY;
+

tests/gem_ctx_param_basic.c igt_main · line 161

Quoted 10 lines
tests/gem_ctx_param_basic.c +10 -0
+	igt_subtest("priority-root-set") {
+		ctx_param.context = ctx;
+		ctx_param.value = 2048;
+		TEST_FAIL(LOCAL_IOCTL_I915_GEM_CONTEXT_SETPARAM, EINVAL);
+		ctx_param.value = -2048;
+		TEST_FAIL(LOCAL_IOCTL_I915_GEM_CONTEXT_SETPARAM, EINVAL);
+		ctx_param.value = 512;
+		TEST_SUCCESS(LOCAL_IOCTL_I915_GEM_CONTEXT_SETPARAM);
+		ctx_param.value = -512;
+		TEST_SUCCESS(LOCAL_IOCTL_I915_GEM_CONTEXT_SETPARAM);

in the latest scheduler patchset I've looked at the max and min priority values were exported through debugfs via i915_scheduler_priority_<min/max>, so instead of using 512 and 2048 as valid and invalid priority values we could use the values returned by the debugfs forTEST_SUCCESS and the same values +/-1 for TEST_FAIL.

The patch as it is still LGTM, so with or without my suggested change:

Regards,
Daniele

Quoted 18 lines
tests/gem_ctx_param_basic.c +18 -0
+		ctx_param.value = 0;
+		TEST_SUCCESS(LOCAL_IOCTL_I915_GEM_CONTEXT_SETPARAM);
+	}
+
+	igt_subtest("priority-non-root-set") {
+		igt_fork(child, 1) {
+			igt_drop_root();
+
+			ctx_param.context = ctx;
+			ctx_param.value = 512;
+			TEST_FAIL(LOCAL_IOCTL_I915_GEM_CONTEXT_SETPARAM, EPERM);
+			ctx_param.value = -512;
+			TEST_SUCCESS(LOCAL_IOCTL_I915_GEM_CONTEXT_SETPARAM);
+			ctx_param.value = 0;
+			TEST_SUCCESS(LOCAL_IOCTL_I915_GEM_CONTEXT_SETPARAM);
+		}
+
+		igt_waitchildren();

tests/gem_ctx_param_basic.c igt_main · line 188

Quoted 10 lines
tests/gem_ctx_param_basic.c +3 -1
+	}
+
  	/* NOTE: This testcase intentionally tests for the next free parameter
  	 * to catch ABI extensions. Don't "fix" this testcase without adding all
  	 * the tests for the new param first. */
-	ctx_param.param = LOCAL_CONTEXT_PARAM_GTT_SIZE + 1;
+	ctx_param.param = LOCAL_CONTEXT_PARAM_PRIORITY + 1;
 
  	igt_subtest("invalid-param-get") {
  		ctx_param.context = ctx;

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#12 lore raw

PATCH 4/4 tests/gem_scheduler: Add subtests to test batch priority behaviour

In reply to Derek Morton

Add subtests to test each ring to check batch buffers of a higher priority will be executed before batch buffers of a lower priority.

---
 tests/gem_scheduler.c | 34 ++++++++++++++++++++++++++++------
 1 file changed, 28 insertions(+), 6 deletions(-)
tests/gem_scheduler.c +28 -6
index 4824c13..febde01 100644
@@ -39,7 +39,8 @@
 
 IGT_TEST_DESCRIPTION("Check scheduler behaviour. Basic tests ensure independant "
                      "batch buffers of the same priority are executed in "
-                     "submission order. Read-read tests ensure "
+                     "submission order. Priority tests ensure higher priority "
+                     "batch buffers are executed first. Read-read tests ensure "
                      "batch buffers with a read dependency to the same buffer "
                      "object do not block each other. Write-write dependency "
                      "tests ensure batch buffers with a write dependency to a "
@@ -61,11 +62,13 @@ struct ring {
 
 #define NBR_RINGS (sizeof(rings)/sizeof(struct ring))
 
-/* Basic test. Check batch buffers of the same priority and with no dependencies
- * are executed in the order they are submitted.
+/* If 'priority' is set false, check batch buffers of the same priority and with
+ * no dependencies are executed in the order they are submitted.
+ * If 'priority' is set true, check batch buffers of higher priority are
+ * executed before batch buffers of lower priority.
  */
 #define NBR_BASIC_FDs (3)
-static void run_test_basic(int in_flight, int ringid)
+static void run_test_basic(int in_flight, int ringid, bool priority)
 {
 	int fd[NBR_BASIC_FDs];
 	int loop;
@@ -95,6 +98,15 @@ static void run_test_basic(int in_flight, int ringid)
 		intel_batchbuffer_free(noop_bb);
 	}
 
+	if(priority) {
+		struct local_i915_gem_context_param param;
+		param.context = 0; /* Default context */
+		param.size = 0;
+		param.param = LOCAL_CONTEXT_PARAM_PRIORITY;
+		param.value = 1000;
+		gem_context_set_param(fd[2], &param);
+	}
+
 	/* Create buffer objects */
 	delay_bo = drm_intel_bo_alloc(bufmgr[0], "delay bo", BATCH_SZ, BATCH_SZ);
 	igt_assert(delay_bo);
@@ -146,7 +158,12 @@ static void run_test_basic(int in_flight, int ringid)
 	igt_assert_f(igt_compare_timestamps(delay_buf[2], ts1_buf[0]),
 	             "Delay ts (0x%08" PRIx32 ") > TS1 ts (0x%08" PRIx32 ")\n",
 	             delay_buf[2], ts1_buf[0]);
-	igt_assert_f(igt_compare_timestamps(ts1_buf[0], ts2_buf[0]),
+	if(priority)
+		igt_assert_f(igt_compare_timestamps(ts2_buf[0], ts1_buf[0]),
+		             "TS2 ts (0x%08" PRIx32 ") > TS1 ts (0x%08" PRIx32 ")\n",
+		             ts2_buf[0], ts1_buf[0]);
+	else
+		igt_assert_f(igt_compare_timestamps(ts1_buf[0], ts2_buf[0]),
 	             "TS1 ts (0x%08" PRIx32 ") > TS2 ts (0x%08" PRIx32 ")\n",
 	             ts1_buf[0], ts2_buf[0]);
 
@@ -393,7 +410,12 @@ igt_main
 
 	for (loop=0; loop < NBR_RINGS; loop++)
 		igt_subtest_f("%s-basic", rings[loop].name) {
-			run_test_basic(in_flight, rings[loop].id);
+			run_test_basic(in_flight, rings[loop].id, false);
+		}
+
+	for (loop=0; loop < NBR_RINGS; loop++)
+		igt_subtest_f("%s-priority", rings[loop].name) {
+			run_test_basic(in_flight, rings[loop].id, true);
 		}
 
 	for (loop=0; loop < NBR_RINGS; loop++)
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#13 lore raw

Re: [PATCH i-g-t 4/4] tests/gem_scheduler: Add subtests to test batch priority behaviour

Quoted 40 lines · Derek Morton

Add subtests to test each ring to check batch buffers of a higher priority will be executed before batch buffers of a lower priority.

---
  tests/gem_scheduler.c | 34 ++++++++++++++++++++++++++++------
  1 file changed, 28 insertions(+), 6 deletions(-)
tests/gem_scheduler.c +7 -4
index 4824c13..febde01 100644
@@ -39,7 +39,8 @@
 
  IGT_TEST_DESCRIPTION("Check scheduler behaviour. Basic tests ensure independant "
                       "batch buffers of the same priority are executed in "
-                     "submission order. Read-read tests ensure "
+                     "submission order. Priority tests ensure higher priority "
+                     "batch buffers are executed first. Read-read tests ensure "
                       "batch buffers with a read dependency to the same buffer "
                       "object do not block each other. Write-write dependency "
                       "tests ensure batch buffers with a write dependency to a "
@@ -61,11 +62,13 @@ struct ring {
 
  #define NBR_RINGS (sizeof(rings)/sizeof(struct ring))
 
-/* Basic test. Check batch buffers of the same priority and with no dependencies
- * are executed in the order they are submitted.
+/* If 'priority' is set false, check batch buffers of the same priority and with
+ * no dependencies are executed in the order they are submitted.
+ * If 'priority' is set true, check batch buffers of higher priority are
+ * executed before batch buffers of lower priority.
   */
  #define NBR_BASIC_FDs (3)
-static void run_test_basic(int in_flight, int ringid)
+static void run_test_basic(int in_flight, int ringid, bool priority)
  {
  	int fd[NBR_BASIC_FDs];
  	int loop;

tests/gem_scheduler.c static void run_test_basic(int in_flight, int ringid) · line 107

Quoted 10 lines
tests/gem_scheduler.c +7 -0
@@ -95,6 +98,15 @@ static void run_test_basic(int in_flight, int ringid)
  		intel_batchbuffer_free(noop_bb);
  	}
 
+	if(priority) {
+		struct local_i915_gem_context_param param;
+		param.context = 0; /* Default context */
+		param.size = 0;
+		param.param = LOCAL_CONTEXT_PARAM_PRIORITY;
+		param.value = 1000;
+		gem_context_set_param(fd[2], &param);

It would be nice to repeat the test lowering the priority of the default ctx of fd[1] instead of increasing the priority of the default ctx of fd[2]. Maybe we could pass the priority value instead of a bool as parameter in the function and have 3 possible behaviors based on the value (0, positive, negative)

Regards,
Daniele

Quoted 23 lines
tests/gem_scheduler.c +8 -1
+	}
+
  	/* Create buffer objects */
  	delay_bo = drm_intel_bo_alloc(bufmgr[0], "delay bo", BATCH_SZ, BATCH_SZ);
  	igt_assert(delay_bo);
@@ -146,7 +158,12 @@ static void run_test_basic(int in_flight, int ringid)
  	igt_assert_f(igt_compare_timestamps(delay_buf[2], ts1_buf[0]),
  	             "Delay ts (0x%08" PRIx32 ") > TS1 ts (0x%08" PRIx32 ")\n",
  	             delay_buf[2], ts1_buf[0]);
-	igt_assert_f(igt_compare_timestamps(ts1_buf[0], ts2_buf[0]),
+	if(priority)
+		igt_assert_f(igt_compare_timestamps(ts2_buf[0], ts1_buf[0]),
+		             "TS2 ts (0x%08" PRIx32 ") > TS1 ts (0x%08" PRIx32 ")\n",
+		             ts2_buf[0], ts1_buf[0]);
+	else
+		igt_assert_f(igt_compare_timestamps(ts1_buf[0], ts2_buf[0]),
  	             "TS1 ts (0x%08" PRIx32 ") > TS2 ts (0x%08" PRIx32 ")\n",
  	             ts1_buf[0], ts2_buf[0]);
 
@@ -393,7 +410,12 @@ igt_main
 
  	for (loop=0; loop < NBR_RINGS; loop++)
  		igt_subtest_f("%s-basic", rings[loop].name) {

tests/gem_scheduler.c igt_main · line 421

Quoted 10 lines
tests/gem_scheduler.c +6 -1
-			run_test_basic(in_flight, rings[loop].id);
+			run_test_basic(in_flight, rings[loop].id, false);
+		}
+
+	for (loop=0; loop < NBR_RINGS; loop++)
+		igt_subtest_f("%s-priority", rings[loop].name) {
+			run_test_basic(in_flight, rings[loop].id, true);
  		}
 
  	for (loop=0; loop < NBR_RINGS; loop++)

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#14 lore raw

Re: [PATCH i-g-t 4/4] tests/gem_scheduler: Add subtests to test batch priority behaviour

-----Original Message-----
From: Ceraolo Spurio, Daniele
Sent: Wednesday, February 17, 2016 1:10 PM
To: Morton, Derek J <[email protected]>; [email protected]
Subject: Re: [Intel-gfx] [PATCH i-g-t 4/4] tests/gem_scheduler: Add subtests to test batch priority behaviour

Quoted 43 lines · Derek Morton

Add subtests to test each ring to check batch buffers of a higher priority will be executed before batch buffers of a lower priority.

---
  tests/gem_scheduler.c | 34 ++++++++++++++++++++++++++++------
  1 file changed, 28 insertions(+), 6 deletions(-)
tests/gem_scheduler.c index renamed from tests/gem_scheduler.c +0 -0

4824c13..febde01 100644

tests/gem_scheduler.c +2 -2
@@ -39,7 +39,8 @@
 
  IGT_TEST_DESCRIPTION("Check scheduler behaviour. Basic tests ensure independant "
                       "batch buffers of the same priority are executed in "
-                     "submission order. Read-read tests ensure "
+                     "submission order. Priority tests ensure higher priority "
+                     "batch buffers are executed first. Read-read tests ensure "
                       "batch buffers with a read dependency to the same buffer "
                       "object do not block each other. Write-write dependency "
                       "tests ensure batch buffers with a write dependency to a "
@@ -61,11 +62,13 @@ struct ring {
 
  #define NBR_RINGS (sizeof(rings)/sizeof(struct ring))
 
-/* Basic test. Check batch buffers of the same priority and with no 

dependencies
- * are executed in the order they are submitted.

tests/gem_scheduler.c +7 -1
+/* If 'priority' is set false, check batch buffers of the same 
+priority and with
+ * no dependencies are executed in the order they are submitted.
+ * If 'priority' is set true, check batch buffers of higher priority 
+are
+ * executed before batch buffers of lower priority.
   */
  #define NBR_BASIC_FDs (3)
-static void run_test_basic(int in_flight, int ringid)
+static void run_test_basic(int in_flight, int ringid, bool priority)
  {
  	int fd[NBR_BASIC_FDs];
  	int loop;

tests/gem_scheduler.c static void run_test_basic(int in_flight, int ringid) · line 107

Quoted 10 lines
tests/gem_scheduler.c +7 -0
@@ -95,6 +98,15 @@ static void run_test_basic(int in_flight, int ringid)
  		intel_batchbuffer_free(noop_bb);
  	}
 
+	if(priority) {
+		struct local_i915_gem_context_param param;
+		param.context = 0; /* Default context */
+		param.size = 0;
+		param.param = LOCAL_CONTEXT_PARAM_PRIORITY;
+		param.value = 1000;
+		gem_context_set_param(fd[2], &param);

It would be nice to repeat the test lowering the priority of the default ctx of fd[1] instead of increasing the priority of the default ctx of fd[2]. Maybe we could pass the priority value instead of a bool as parameter in the function and have 3 possible behaviors based on the value (0, positive, negative)

I will change from a bool to an int to pass in the priority. If it is <0 apply to fd[1] instead of fd[2] and add a test to lower priority.

Regards,
Daniele

Quoted 23 lines
tests/gem_scheduler.c +8 -1
+	}
+
  	/* Create buffer objects */
  	delay_bo = drm_intel_bo_alloc(bufmgr[0], "delay bo", BATCH_SZ, BATCH_SZ);
  	igt_assert(delay_bo);
@@ -146,7 +158,12 @@ static void run_test_basic(int in_flight, int ringid)
  	igt_assert_f(igt_compare_timestamps(delay_buf[2], ts1_buf[0]),
  	             "Delay ts (0x%08" PRIx32 ") > TS1 ts (0x%08" PRIx32 ")\n",
  	             delay_buf[2], ts1_buf[0]);
-	igt_assert_f(igt_compare_timestamps(ts1_buf[0], ts2_buf[0]),
+	if(priority)
+		igt_assert_f(igt_compare_timestamps(ts2_buf[0], ts1_buf[0]),
+		             "TS2 ts (0x%08" PRIx32 ") > TS1 ts (0x%08" PRIx32 ")\n",
+		             ts2_buf[0], ts1_buf[0]);
+	else
+		igt_assert_f(igt_compare_timestamps(ts1_buf[0], ts2_buf[0]),
  	             "TS1 ts (0x%08" PRIx32 ") > TS2 ts (0x%08" PRIx32 ")\n",
  	             ts1_buf[0], ts2_buf[0]);
 
@@ -393,7 +410,12 @@ igt_main
 
  	for (loop=0; loop < NBR_RINGS; loop++)
  		igt_subtest_f("%s-basic", rings[loop].name) {

tests/gem_scheduler.c igt_main · line 421

Quoted 10 lines
tests/gem_scheduler.c +6 -1
-			run_test_basic(in_flight, rings[loop].id);
+			run_test_basic(in_flight, rings[loop].id, false);
+		}
+
+	for (loop=0; loop < NBR_RINGS; loop++)
+		igt_subtest_f("%s-priority", rings[loop].name) {
+			run_test_basic(in_flight, rings[loop].id, true);
  		}
 
  	for (loop=0; loop < NBR_RINGS; loop++)

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx