Patch "ARM: dts: at91: sama5d4ek: add phy address and IRQ for macb0" has been added to the 4.4-stable tree
This is a note to let you know that I've just added the patch titled
ARM: dts: at91: sama5d4ek: add phy address and IRQ for macb0
to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
arm-dts-at91-sama5d4ek-add-phy-address-and-irq-for-macb0.patch
and it can be found in the queue-4.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.
Quoted 1 line
From
aae6b18f5c95b9dc78de66d1e27e8afeee2763b7Mon Sep 17 00:00:00 2001
From: Wenyou Yang <[email protected]>
Date: Wed, 27 Jan 2016 13:16:24 +0800
Subject: ARM: dts: at91: sama5d4ek: add phy address and IRQ for macb0
From: Wenyou Yang <[email protected]>
commit aae6b18f5c95b9dc78de66d1e27e8afeee2763b7 upstream.
On SAMA5D4EK board, the Ethernet doesn't work after resuming from the suspend state.
--- arch/arm/boot/dts/at91-sama5d4ek.dts | 11 +++++++++++ 1 file changed, 11 insertions(+)
arch/arm/boot/dts/at91-sama5d4ek.dts +11 -0
@@ -160,8 +160,15 @@ }; macb0: ethernet@f8020000 { + pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>; phy-mode = "rmii"; status = "okay"; + + ethernet-phy@1 { + reg = <0x1>; + interrupt-parent = <&pioE>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + }; }; mmc1: mmc@fc000000 {
@@ -193,6 +200,10 @@ pinctrl@fc06a000 { board { + pinctrl_macb0_phy_irq: macb0_phy_irq { + atmel,pins = + <AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; pinctrl_mmc0_cd: mmc0_cd { atmel,pins = <AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
Patches currently in stable-queue which might be from [email protected] are
queue-4.4/arm-dts-at91-sama5d4ek-add-phy-address-and-irq-for-macb0.patch