arm: socfpga: Enabling U-Boot environment support in QSPI
PATCH 1/1 arm: socfpga: Enabling U-Boot environment support in QSPI
Enabling the support of storing U-Boot environment within serial NOR flash. By default, its still store into SDMMC
--- include/configs/socfpga_common.h | 6 ++++++ 1 file changed, 6 insertions(+)
include/configs/socfpga_common.h +6 -0
@@ -291,6 +291,12 @@ unsigned int cm_get_qspi_controller_clk_hz(void);#define CONFIG_ENV_OFFSET 512/* just after the MBR */ #endif +/* Environment for QSPI boot */ +#if defined(CONFIG_ENV_IS_IN_SPI_FLASH ) && !defined(CONFIG_ENV_OFFSET ) +#define CONFIG_ENV_OFFSET 0x00100000 +#define CONFIG_ENV_SECT_SIZE (64 * 1024) +#endif +/* * mtd partitioning for serial NOR flash *
Signature · 1 line
1.9.2.468.g3f0c02a
PATCH 1/1 arm: socfpga: Enabling U-Boot environment support in QSPI
Quoted 10 lines · Chin Liang See
Enabling the support of storing U-Boot environment within serial NOR flash. By default, its still store into SDMMC
Signed-off-by Chin Liang See <[email protected]>Cc Dinh Nguyen <[email protected]>Cc Dinh Nguyen <[email protected]>Cc Pavel Machek <[email protected]>Cc Marek Vasut <[email protected]>Cc Stefan Roese <[email protected]>
I am fine with the patch, but why did I receive it thrice ? ;-)
Quoted 22 lines
--- include/configs/socfpga_common.h | 6 ++++++ 1 file changed, 6 insertions(+)include/configs/socfpga_common.h +6
-0@@ -291,6 +291,12 @@ unsigned int cm_get_qspi_controller_clk_hz(void);#define CONFIG_ENV_OFFSET 512/* just after the MBR */ #endif +/* Environment for QSPI boot */ +#if defined(CONFIG_ENV_IS_IN_SPI_FLASH ) && !defined(CONFIG_ENV_OFFSET ) +#define CONFIG_ENV_OFFSET 0x00100000 +#define CONFIG_ENV_SECT_SIZE (64 * 1024) +#endif +/* * mtd partitioning for serial NOR flash *
PATCH 1/1 arm: socfpga: Enabling U-Boot environment support in QSPI
Quoted 5 lines · Marek Vasut
Quoted 4 lines · Chin Liang See
Enabling the support of storing U-Boot environment within serial NOR flash. By default, its still store into SDMMC
Quoted 9 lines
Quoted 6 lines
Signed-off-by Chin Liang See <[email protected]>Cc Dinh Nguyen <[email protected]>Cc Dinh Nguyen <[email protected]>Cc Pavel Machek <[email protected]>Cc Marek Vasut <[email protected]>Cc Stefan Roese <[email protected]>I am fine with the patch, but why did I receive it thrice ? ;-)
Sorry about this as I thought IT blocked the email sending. I noticed the U-Boot mailing didn't show the patch after 10 mins. I was surprised to see 3 and guess it took longer time to go through IT servers screening :)
Thanks
Chin Liang
Quoted 27 lines
Quoted 26 lines
--- include/configs/socfpga_common.h | 6 ++++++ 1 file changed, 6 insertions(+)include/configs/socfpga_common.h +0
-0@@ -291,6 +291,12 @@ unsigned intcm_get_qspi_controller_clk_hz (void);#define CONFIG_ENV_OFFSET 512/* just after the MBR */
#endifinclude/configs/socfpga_common.h +2
-0+/* Environment for QSPI boot */ +#if defined(CONFIG_ENV_IS_IN_SPI_FLASH) &&!defined(CONFIG_ENV_OFFSET)
include/configs/socfpga_common.h +4
-0+#define CONFIG_ENV_OFFSET 0x00100000 +#define CONFIG_ENV_SECT_SIZE (64 * 1024) +#endif +/* * mtd partitioning for serial NOR flash *
PATCH 1/1 arm: socfpga: Enabling U-Boot environment support in QSPI
Quoted 13 lines · Chin Liang See
Quoted 12 lines · Marek Vasut
Quoted 10 lines · Chin Liang See
Enabling the support of storing U-Boot environment within serial NOR flash. By default, its still store into SDMMC
Signed-off-by Chin Liang See <[email protected]>Cc Dinh Nguyen <[email protected]>Cc Dinh Nguyen <[email protected]>Cc Pavel Machek <[email protected]>Cc Marek Vasut <[email protected]>Cc Stefan Roese <[email protected]>
Quoted 7 lines
Quoted 2 lines
I am fine with the patch, but why did I receive it thrice ? ;-)
Sorry about this as I thought IT blocked the email sending. I noticed the U-Boot mailing didn't show the patch after 10 mins. I was surprised to see 3 and guess it took longer time to go through IT servers screening :)
Gotcha!
btw I started screening the patches a bit more. socfpga_sr1500 produces a warning with this patch.
Please use buildman to build your patches, something like:
./tools/buildman/buildman -b u-boot/master..HEAD -defsS "socfpga"
will do the trick.
Signature · 2 lines
Best regards, Marek Vasut
PATCH 1/1 arm: socfpga: Enabling U-Boot environment support in QSPI
Quoted 30 lines · Marek Vasut
Quoted 16 lines · Chin Liang See
Quoted 5 lines · Marek Vasut
Quoted 4 lines · Chin Liang See
Enabling the support of storing U-Boot environment within serial NOR flash. By default, its still store into SDMMC
Quoted 9 lines
Quoted 6 lines
Signed-off-by Chin Liang See <[email protected]>Cc Dinh Nguyen <[email protected]>Cc Dinh Nguyen <[email protected]>Cc Pavel Machek <[email protected]>Cc Marek Vasut <[email protected]>Cc Stefan Roese <[email protected]>I am fine with the patch, but why did I receive it thrice ? ;-)
Quoted 6 lines
Sorry about this as I thought IT blocked the email sending. I noticed
the U-Boot mailing didn't show the patch after 10 mins. I was surprised
to see 3 and guess it took longer time to go through IT servers screening :)Gotcha!
btw I started screening the patches a bit more.
socfpga_sr1500produces
a warning with this patch.
Quoted 5 lines
Please use buildman to build your patches, something like:
./tools/buildman/buildman-b u-boot/master..HEAD -defsS "socfpga"will do the trick.
Oops, thanks for reminding this as we talked about this prior my long holiday. I managed to get the buildman works but seems need 2 steps. The first step is without the -defsS and without the "" too.
Thanks
Chin Liang
Quoted 1 line
PATCH 1/1 arm: socfpga: Enabling U-Boot environment support in QSPI
Quoted 33 lines · Chin Liang See
Quoted 32 lines · Marek Vasut
Quoted 16 lines · Chin Liang See
Quoted 5 lines · Marek Vasut
Quoted 4 lines · Chin Liang See
Enabling the support of storing U-Boot environment within serial NOR flash. By default, its still store into SDMMC
Quoted 9 lines
Quoted 6 lines
Signed-off-by Chin Liang See <[email protected]>Cc Dinh Nguyen <[email protected]>Cc Dinh Nguyen <[email protected]>Cc Pavel Machek <[email protected]>Cc Marek Vasut <[email protected]>Cc Stefan Roese <[email protected]>I am fine with the patch, but why did I receive it thrice ? ;-)
Quoted 6 lines
Sorry about this as I thought IT blocked the email sending. I noticed
the U-Boot mailing didn't show the patch after 10 mins. I was surprised
to see 3 and guess it took longer time to go through IT servers screening :)Gotcha!
btw I started screening the patches a bit more.
socfpga_sr1500produces
a warning with this patch.Please use buildman to build your patches, something like:
Quoted 7 lines
Quoted 3 lines
./tools/buildman/buildman-b u-boot/master..HEAD -defsS "socfpga"will do the trick.
Oops, thanks for reminding this as we talked about this prior my long holiday. I managed to get the buildman works but seems need 2 steps. The first step is without the -defsS and without the "" too.
Ah, right. It's really convenient tool, right ? ;-)
Signature · 2 lines
Best regards, Marek Vasut
PATCH 1/1 arm: socfpga: Enabling U-Boot environment support in QSPI
Quoted 39 lines · Marek Vasut
Quoted 38 lines · Chin Liang See
Quoted 36 lines · Marek Vasut
Quoted 17 lines · Chin Liang See
Quoted 12 lines · Marek Vasut
Quoted 10 lines · Chin Liang See
Enabling the support of storing U-Boot environment within serial NOR flash. By default, its still store into SDMMC
Signed-off-by Chin Liang See <[email protected]>Cc Dinh Nguyen <[email protected]>Cc Dinh Nguyen <[email protected]>Cc Pavel Machek <[email protected]>Cc Marek Vasut <[email protected]>Cc Stefan Roese <[email protected]>Quoted 3 lines
I am fine with the patch, but why did I receive it thrice ? ; -)
Quoted 6 lines
Sorry about this as I thought IT blocked the email sending. I noticed
the U-Boot mailing didn't show the patch after 10 mins. I was surprised
to see 3 and guess it took longer time to go through IT servers screening :)Gotcha!
btw I started screening the patches a bit more.
socfpga_sr1500produces
a warning with this patch.Please use buildman to build your patches, something like:
./tools/buildman/buildman-b u-boot/master..HEAD -defsS "socfpga"will do the trick.
Quoted 8 lines
Quoted 5 lines
Oops, thanks for reminding this as we talked about this prior my long
holiday. I managed to get the buildman works but seems need 2 steps.
The first step is without the -defsS and without the "" too.Ah, right. It's really convenient tool, right ? ;-)
Yup, I fully agree :) The same command can be used even we added new boards or socfpga devices.
Thanks
Chin Liang