Skip to contentSkip to conversation

Bluetooth: Add a new AR3012 ID 04ca:3014

PATCH In review Dmitry Tunin 2 participants 2 messages Feb 28, 2016

Subsystems (2)
Stable branch Bluetooth drivers
lore
Share & tools
lore

Dmitry Tunin

author
#0 lore raw

PATCH 1/1 Bluetooth: Add a new AR3012 ID 04ca:3014

T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=03 Dev#= 5 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=04ca ProdID=3014 Rev=00.02
C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

BugLink https://bugs.launchpad.net/bugs/1546694
Signed-off-by Dmitry Tunin <[email protected]>
Cc [email protected]
---
 drivers/bluetooth/ath3k.c | 2 ++
 drivers/bluetooth/btusb.c | 1 +
 2 files changed, 3 insertions(+)
drivers/bluetooth/ath3k.c +2 -0
index e2ccf90..9374738 100644
@@ -93,6 +93,7 @@ static const struct usb_device_id ath3k_table[] = {
 	{ USB_DEVICE(0x04CA, 0x300d) },
 	{ USB_DEVICE(0x04CA, 0x300f) },
 	{ USB_DEVICE(0x04CA, 0x3010) },
+	{ USB_DEVICE(0x04CA, 0x3014) },
 	{ USB_DEVICE(0x0930, 0x0219) },
 	{ USB_DEVICE(0x0930, 0x021c) },
 	{ USB_DEVICE(0x0930, 0x0220) },

@@ -157,6 +158,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = {
 	{ USB_DEVICE(0x04ca, 0x300d), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04ca, 0x300f), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04ca, 0x3010), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x04ca, 0x3014), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0930, 0x021c), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0930, 0x0220), .driver_info = BTUSB_ATH3012 },
drivers/bluetooth/btusb.c +1 -0
index 55fbdfc..97f3bba 100644
@@ -207,6 +207,7 @@ static const struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x04ca, 0x300d), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04ca, 0x300f), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04ca, 0x3010), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x04ca, 0x3014), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0930, 0x021c), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0930, 0x0220), .driver_info = BTUSB_ATH3012 },
Signature · 1 line
1.9.1
maintainer
#1 lore raw

Hi Dmitry,

Quoted 7 lines

T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=03 Dev#= 5 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=04ca ProdID=3014 Rev=00.02
C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

Quoted 8 lines
BugLink https://bugs.launchpad.net/bugs/1546694
Signed-off-by Dmitry Tunin <[email protected]>
Cc [email protected]

---
drivers/bluetooth/ath3k.c | 2 ++
drivers/bluetooth/btusb.c | 1 +

2 files changed, 3 insertions(+)

patch has been applied to bluetooth-next tree.

Regards

Marcel