Patch "USB: option: add support for SIM7100E" has been added to the 3.10-stable tree

This is a note to let you know that I've just added the patch titled

USB: option: add support for SIM7100E

to the 3.10-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
usb-option-add-support-for-sim7100e.patch
and it can be found in the queue-3.10 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

From: Andrey Skvortsov <[email protected]>
Date: Fri, 29 Jan 2016 00:07:30 +0300
Subject: USB: option: add support for SIM7100E

From: Andrey Skvortsov <[email protected]>

commit 3158a8d416f4e1b79dcc867d67cb50013140772c upstream.

$ lsusb:
Bus 001 Device 101: ID 1e0e:9001 Qualcomm / Option

$ usb-devices:
T:  Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=101 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  2
P:  Vendor=1e0e ProdID=9001 Rev= 2.32
S:  Manufacturer=SimTech, Incorporated
S:  Product=SimTech, Incorporated
S:  SerialNumber=0123456789ABCDEF
C:* #Ifs= 7 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)

The last interface (6) is used for Android Composite ADB interface.

Serial port layout:
0: QCDM/DIAG
1: NMEA
2: AT
3: AT/PPP
4: audio

---
 drivers/usb/serial/option.c |    7 +++++++
 1 file changed, 7 insertions(+)

@@ -315,6 +315,7 @@ static void option_instat_callback(struc
 #define TOSHIBA_PRODUCT_G450			0x0d45
 
 #define ALINK_VENDOR_ID				0x1e0e
+#define SIMCOM_PRODUCT_SIM7100E			0x9001 /* Yes, ALINK_VENDOR_ID */
 #define ALINK_PRODUCT_PH300			0x9100
 #define ALINK_PRODUCT_3GU			0x9200
 

@@ -615,6 +616,10 @@ static const struct option_blacklist_inf
 	.reserved = BIT(3) | BIT(4),
 };
 
+static const struct option_blacklist_info simcom_sim7100e_blacklist = {
+	.reserved = BIT(5) | BIT(6),
+};
+
 static const struct option_blacklist_info telit_le910_blacklist = {
 	.sendsetup = BIT(0),
 	.reserved = BIT(1) | BIT(2),

@@ -1645,6 +1650,8 @@ static const struct usb_device_id option
 	{ USB_DEVICE(ALINK_VENDOR_ID, 0x9000) },
 	{ USB_DEVICE(ALINK_VENDOR_ID, ALINK_PRODUCT_PH300) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ALINK_VENDOR_ID, ALINK_PRODUCT_3GU, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE(ALINK_VENDOR_ID, SIMCOM_PRODUCT_SIM7100E),
+	  .driver_info = (kernel_ulong_t)&simcom_sim7100e_blacklist },
 	{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S_X200),
 	  .driver_info = (kernel_ulong_t)&alcatel_x200_blacklist
 	},

Patches currently in stable-queue which might be from [email protected] are

queue-3.10/usb-option-add-support-for-sim7100e.patch