Skip to contentSkip to conversation

imx: mx6sx: move MX6SX to Kconfig entry

PATCH New Peng Fan 2 participants 4 messages Mar 3, 2016 Arm (32-bit)

lore
Share & tools
lore

Peng Fan

author
#0 lore raw

PATCH 1/2 imx: mx6sx: move MX6SX to Kconfig entry

If including MX6SX in CONFIG_SYS_EXTRA_OPTIONS, CONFIG_ROM_UNIFIED_SECTIONS will not effect.So move MX6SX to Kconfig entry from CONFIG_SYS_EXTRA_OPTIONS to "select MX6SX" to boards using i.MX6 SoloX.

Signed-off-by Peng Fan <[email protected]>
Cc Stefano Babic <[email protected]>
Cc Fabio Estevam <[email protected]>
---
 arch/arm/cpu/armv7/mx6/Kconfig     | 2 ++
 configs/mx6sxsabreauto_defconfig   | 2 +-
 configs/mx6sxsabresd_defconfig     | 2 +-
 configs/mx6sxsabresd_spl_defconfig | 2 +-
 4 files changed, 5 insertions(+), 3 deletions(-)
arch/arm/cpu/armv7/mx6/Kconfig +2 -0
index c72a150..8827caa 100644
@@ -92,12 +92,14 @@ config TARGET_MX6SLEVK
 
 config TARGET_MX6SXSABRESD
 	bool "mx6sxsabresd"
+	select MX6SX
 	select SUPPORT_SPL
 	select DM
 	select DM_THERMAL
 
 config TARGET_MX6SXSABREAUTO
         bool "mx6sxsabreauto"
+	select MX6SX
         select DM
         select DM_THERMAL
configs/mx6sxsabreauto_defconfig +1 -1
index d9e35df..631a998 100644
@@ -1,7 +1,7 @@
 CONFIG_ARM=y
 CONFIG_ARCH_MX6=y
 CONFIG_TARGET_MX6SXSABREAUTO=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sxsabreauto/imximage.cfg,MX6SX"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sxsabreauto/imximage.cfg"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_GPIO=y
configs/mx6sxsabresd_defconfig +1 -1
index 953a246..6f97279 100644
@@ -1,7 +1,7 @@
 CONFIG_ARM=y
 CONFIG_ARCH_MX6=y
 CONFIG_TARGET_MX6SXSABRESD=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sxsabresd/imximage.cfg,MX6SX"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sxsabresd/imximage.cfg"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_GPIO=y
configs/mx6sxsabresd_spl_defconfig +1 -1
index 3843f99..2b76e09 100644
@@ -2,7 +2,7 @@ CONFIG_ARM=y
 CONFIG_ARCH_MX6=y
 CONFIG_TARGET_MX6SXSABRESD=y
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6SX"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_GPIO=y
Signature · 1 line
2.6.2
author
#1 lore raw

PATCH 2/2 imx: mx7d: move MX7D to Kconfig entry

If including MX7D in CONFIG_SYS_EXTRA_OPTIONS, CONFIG_ROM_UNIFIED_SECTIONS
will not effect.So move MX7D to Kconfig entry from CONFIG_SYS_EXTRA_OPTIONS to
"select MX7D" to boards using i.MX7 Dual.

Signed-off-by Peng Fan <[email protected]>
Cc Stefano Babic <[email protected]>
Cc Fabio Estevam <[email protected]>
---
 arch/arm/cpu/armv7/mx7/Kconfig | 1 +
 configs/mx7dsabresd_defconfig  | 2 +-
 2 files changed, 2 insertions(+), 1 deletion(-)
arch/arm/cpu/armv7/mx7/Kconfig +1 -0
index 97d6238..aa3ace8 100644
@@ -15,6 +15,7 @@ choice
 
 config TARGET_MX7DSABRESD
 	bool "mx7dsabresd"
+	select MX7D
 	select DM
 	select DM_THERMAL
configs/mx7dsabresd_defconfig +1 -1
index 1d262c1..6638475 100644
@@ -3,7 +3,7 @@ CONFIG_ARCH_MX7=y
 CONFIG_TARGET_MX7DSABRESD=y
 CONFIG_IMX_RDC=y
 CONFIG_IMX_BOOTAUX=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx7dsabresd/imximage.cfg,MX7D"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx7dsabresd/imximage.cfg"
 # CONFIG_CMD_BOOTD is not set
 # CONFIG_CMD_IMI is not set
 # CONFIG_CMD_IMLS is not set
Signature · 1 line
2.6.2
#3 lore raw

PATCH 1/2 imx: mx6sx: move MX6SX to Kconfig entry

In reply to Peng Fan
Quoted 5 lines · Peng Fan

If including MX6SX in CONFIG_SYS_EXTRA_OPTIONS, CONFIG_ROM_UNIFIED_SECTIONS will not effect.So move MX6SX to Kconfig entry from CONFIG_SYS_EXTRA_OPTIONS to "select MX6SX" to boards using i.MX6 SoloX.

Signed-off-by Peng Fan <[email protected]>

Don't you want to put in your nxp address?

Quoted 2 lines
Cc Stefano Babic <[email protected]>
Cc Fabio Estevam <[email protected]>
Reviewed-by Fabio Estevam <[email protected]>