Skip to contentSkip to conversation

drm/i915: Only write watermark registers if a pipe is active

PATCH In review Matt Roper 3 participants 7 messages Mar 3, 2016 – Mar 7, 2016

Subsystems (2)
lore
Share & tools
lore

Matt Roper

author
#0 lore raw

PATCH 1/1 drm/i915: Only write watermark registers if a pipe is active

If all pipes are off, then we may have entered runtime suspend and writing these registers will have no effect anyway. When a pipe is re-enabled, it's crtc_enable will take care of programming appropriate watermark values.

Cc: [email protected]
Cc: [email protected]
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94349

Fixes ed4a6a7ca853 ("drm/i915: Add two-stage ILK-style watermark programming (v11)")

---
I've still been unable to reproduce this defect on my SNB system; none of the suggested tests people have noted in Bugzilla have triggered it for me. But based on the stack trace I'm guessing that the problem happens because we've disabled the last pipe and gone into runtime suspend before we get around to optimizing the watermarks.

I'm not super familiar with the details of runtime PM, so if there's a better way this should be handled, I'm open to suggestions.

 drivers/gpu/drm/i915/intel_pm.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
drivers/gpu/drm/i915/intel_pm.c +4 -3
index f65e841..8c7fddf 100644
@@ -2802,8 +2802,6 @@ static void ilk_write_wm_values(struct drm_i915_private *dev_priv,
 		I915_WRITE(WM2_LP_ILK, results->wm_lp[1]);
 	if (dirty & WM_DIRTY_LP(3) && previous->wm_lp[2] != results->wm_lp[2])
 		I915_WRITE(WM3_LP_ILK, results->wm_lp[2]);
-
-	dev_priv->wm.hw = *results;
 }
 
 bool ilk_disable_lp_wm(struct drm_device *dev)
@@ -3731,7 +3729,10 @@ static void ilk_program_watermarks(struct drm_i915_private *dev_priv)
 
 	ilk_compute_wm_results(dev, best_lp_wm, partitioning, &results);
 
-	ilk_write_wm_values(dev_priv, &results);
+	if (config.num_pipes_active > 0)
+		ilk_write_wm_values(dev_priv, &results);
+
+	dev_priv->wm.hw = results;
 }
 
 static void ilk_initial_watermarks(struct intel_crtc_state *cstate)
Signature · 6 lines
2.1.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#1 lore raw
Quoted 17 lines · Matt Roper

If all pipes are off, then we may have entered runtime suspend and writing these registers will have no effect anyway. When a pipe is re-enabled, it's crtc_enable will take care of programming appropriate watermark values.

Cc: [email protected]
Cc: [email protected]
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94349

Fixes ed4a6a7ca853 ("drm/i915: Add two-stage ILK-style watermark programming (v11)")

---
I've still been unable to reproduce this defect on my SNB system; none of the suggested tests people have noted in Bugzilla have triggered it for me. But based on the stack trace I'm guessing that the problem happens because we've disabled the last pipe and gone into runtime suspend before we get around to optimizing the watermarks.

Quoted 2 lines

I'm not super familiar with the details of runtime PM, so if there's a better way this should be handled, I'm open to suggestions.

This definitely feels like papering over the problem. Why is the modeset code still calling watermark updates at the wrong time?

With my original two stage wm code most wm updates got kicked off from the plane commits stage, and the only manual calls were in plaform specific code just before a new pipe is enabled, or just after one is disabled. Very little room for these sorts of errors in that scheme. What we have currently isn't done like that and instead it seems to me we've somehow sprinkled stuff all over some common codepaths which apparently leads to these problems.

Quoted 31 lines
 drivers/gpu/drm/i915/intel_pm.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
drivers/gpu/drm/i915/intel_pm.c +4 -3
index f65e841..8c7fddf 100644
@@ -2802,8 +2802,6 @@ static void ilk_write_wm_values(struct drm_i915_private *dev_priv,
 		I915_WRITE(WM2_LP_ILK, results->wm_lp[1]);
 	if (dirty & WM_DIRTY_LP(3) && previous->wm_lp[2] != results->wm_lp[2])
 		I915_WRITE(WM3_LP_ILK, results->wm_lp[2]);
-
-	dev_priv->wm.hw = *results;
 }
 
 bool ilk_disable_lp_wm(struct drm_device *dev)
@@ -3731,7 +3729,10 @@ static void ilk_program_watermarks(struct drm_i915_private *dev_priv)
 
 	ilk_compute_wm_results(dev, best_lp_wm, partitioning, &results);
 
-	ilk_write_wm_values(dev_priv, &results);
+	if (config.num_pipes_active > 0)
+		ilk_write_wm_values(dev_priv, &results);
+
+	dev_priv->wm.hw = results;
 }
 
 static void ilk_initial_watermarks(struct intel_crtc_state *cstate)
Signature · 1 line
2.1.4
Signature · 6 lines
Ville Syrjälä
ntel OTC
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
author
#2 lore raw
Quoted 24 lines · Ville Syrjälä
Quoted 17 lines · Matt Roper

If all pipes are off, then we may have entered runtime suspend and writing these registers will have no effect anyway. When a pipe is re-enabled, it's crtc_enable will take care of programming appropriate watermark values.

Cc: [email protected]
Cc: [email protected]
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94349

Fixes ed4a6a7ca853 ("drm/i915: Add two-stage ILK-style watermark programming (v11)")

---
I've still been unable to reproduce this defect on my SNB system; none of the suggested tests people have noted in Bugzilla have triggered it for me. But based on the stack trace I'm guessing that the problem happens because we've disabled the last pipe and gone into runtime suspend before we get around to optimizing the watermarks.

Quoted 2 lines

I'm not super familiar with the details of runtime PM, so if there's a better way this should be handled, I'm open to suggestions.

This definitely feels like papering over the problem. Why is the modeset code still calling watermark updates at the wrong time?

Quoted 7 lines

With my original two stage wm code most wm updates got kicked off from the plane commits stage, and the only manual calls were in plaform specific code just before a new pipe is enabled, or just after one is disabled. Very little room for these sorts of errors in that scheme. What we have currently isn't done like that and instead it seems to me we've somehow sprinkled stuff all over some common codepaths which apparently leads to these problems.

I don't think moving the second stage of watermark programming into device-specific code is the direction we want to go. You're still under vblank evasion at that point, so you can't wait for vblanks, but even if you could you'd be adding a lot of unnecessary/redundant wait time. The model we have now is to call the 'optimize' helper as soon as we're done with the post-update vblank waiting. In simplified pseudo-code, the logic is:

    for each crtc in state {
        drm_atomic_helper_commit_planes_on_crtc()  // does vbl evade
    }

    if (!legacy cursor hack)
        intel_atomic_wait_for_vblanks();

    for each crtc in state {
        intel_post_plane_update();
    }

    if (modeset)
        intel_display_power_put()

    for each crtc in state
        optimize watermarks

For our code today, I guess the proper fix is to move the optimize step up above the display power put; looks like that PM code changed around a bit while this series was being rebased, so I think the power put was located elsewhere before. It could even be moved into the post_plane_update function if we wanted, but I had kept it separate since ultimately it's going to move out of the atomic_commit altogether.

Longer term, we'll actually be doing the optimize asynchronously via a workqueue task or something (so at an arbitrary future time after the commit is complete); at that point it's even more likely that things have powered down, so I imagine we'll either need to grab the power reference before optimizing watermarks or else just not bother programming them at all in cases where everything is off (which is the approach this patch took).

Anyway, I'll post another patch to move the optimize call up before we drop the power reference; that should also fix the problem as I understand it.

Matt

Quoted 36 lines
Quoted 32 lines

 drivers/gpu/drm/i915/intel_pm.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
drivers/gpu/drm/i915/intel_pm.c +4 -3
index f65e841..8c7fddf 100644
@@ -2802,8 +2802,6 @@ static void ilk_write_wm_values(struct drm_i915_private *dev_priv,
 		I915_WRITE(WM2_LP_ILK, results->wm_lp[1]);
 	if (dirty & WM_DIRTY_LP(3) && previous->wm_lp[2] != results->wm_lp[2])
 		I915_WRITE(WM3_LP_ILK, results->wm_lp[2]);
-
-	dev_priv->wm.hw = *results;
 }
 
 bool ilk_disable_lp_wm(struct drm_device *dev)
@@ -3731,7 +3729,10 @@ static void ilk_program_watermarks(struct drm_i915_private *dev_priv)
 
 	ilk_compute_wm_results(dev, best_lp_wm, partitioning, &results);
 
-	ilk_write_wm_values(dev_priv, &results);
+	if (config.num_pipes_active > 0)
+		ilk_write_wm_values(dev_priv, &results);
+
+	dev_priv->wm.hw = results;
 }
 
 static void ilk_initial_watermarks(struct intel_crtc_state *cstate)
Signature · 1 line
2.1.4
Signature · 2 lines
Ville Syrjälä
ntel OTC
Signature · 9 lines
Matt Roper
Graphics Software Engineer
IoTG Platform Enabling & Development
Intel Corporation
(916) 356-2795
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#3 lore raw
Quoted 33 lines · Matt Roper
Quoted 24 lines · Ville Syrjälä
Quoted 17 lines · Matt Roper

If all pipes are off, then we may have entered runtime suspend and writing these registers will have no effect anyway. When a pipe is re-enabled, it's crtc_enable will take care of programming appropriate watermark values.

Cc: [email protected]
Cc: [email protected]
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94349

Fixes ed4a6a7ca853 ("drm/i915: Add two-stage ILK-style watermark programming (v11)")

---
I've still been unable to reproduce this defect on my SNB system; none of the suggested tests people have noted in Bugzilla have triggered it for me. But based on the stack trace I'm guessing that the problem happens because we've disabled the last pipe and gone into runtime suspend before we get around to optimizing the watermarks.

Quoted 2 lines

I'm not super familiar with the details of runtime PM, so if there's a better way this should be handled, I'm open to suggestions.

This definitely feels like papering over the problem. Why is the modeset code still calling watermark updates at the wrong time?

Quoted 7 lines

With my original two stage wm code most wm updates got kicked off from the plane commits stage, and the only manual calls were in plaform specific code just before a new pipe is enabled, or just after one is disabled. Very little room for these sorts of errors in that scheme. What we have currently isn't done like that and instead it seems to me we've somehow sprinkled stuff all over some common codepaths which apparently leads to these problems.

Quoted 2 lines

I don't think moving the second stage of watermark programming into device-specific code is the direction we want to go.

In my book the second stage shouldn't even be part of the modeset sequence, and instead if should just be done from a vblank work/etc. which is how I did it.

And the first stage stuff is clearly hardware specific since the behavhoir of the wm registers is hardware specific, so trying to shoehorn it all into the common code is IMO a mistake.

Quoted 89 lines

You're still under
vblank evasion at that point, so you can't wait for vblanks, but even if you could you'd be adding a lot of unnecessary/redundant wait time. The model we have now is to call the 'optimize' helper as soon as we're done with the post-update vblank waiting. In simplified pseudo-code, the logic is:

    for each crtc in state {
        drm_atomic_helper_commit_planes_on_crtc()  // does vbl evade
    }

    if (!legacy cursor hack)
        intel_atomic_wait_for_vblanks();

    for each crtc in state {
        intel_post_plane_update();
    }

    if (modeset)
        intel_display_power_put()

    for each crtc in state
        optimize watermarks

For our code today, I guess the proper fix is to move the optimize step up above the display power put; looks like that PM code changed around a bit while this series was being rebased, so I think the power put was located elsewhere before. It could even be moved into the post_plane_update function if we wanted, but I had kept it separate since ultimately it's going to move out of the atomic_commit altogether.

Longer term, we'll actually be doing the optimize asynchronously via a workqueue task or something (so at an arbitrary future time after the commit is complete); at that point it's even more likely that things have powered down, so I imagine we'll either need to grab the power reference before optimizing watermarks or else just not bother programming them at all in cases where everything is off (which is the approach this patch took).

Anyway, I'll post another patch to move the optimize call up before we drop the power reference; that should also fix the problem as I understand it.

Matt

Quoted 36 lines
Quoted 32 lines

 drivers/gpu/drm/i915/intel_pm.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
drivers/gpu/drm/i915/intel_pm.c +4 -3
index f65e841..8c7fddf 100644
@@ -2802,8 +2802,6 @@ static void ilk_write_wm_values(struct drm_i915_private *dev_priv,
 		I915_WRITE(WM2_LP_ILK, results->wm_lp[1]);
 	if (dirty & WM_DIRTY_LP(3) && previous->wm_lp[2] != results->wm_lp[2])
 		I915_WRITE(WM3_LP_ILK, results->wm_lp[2]);
-
-	dev_priv->wm.hw = *results;
 }
 
 bool ilk_disable_lp_wm(struct drm_device *dev)
@@ -3731,7 +3729,10 @@ static void ilk_program_watermarks(struct drm_i915_private *dev_priv)
 
 	ilk_compute_wm_results(dev, best_lp_wm, partitioning, &results);
 
-	ilk_write_wm_values(dev_priv, &results);
+	if (config.num_pipes_active > 0)
+		ilk_write_wm_values(dev_priv, &results);
+
+	dev_priv->wm.hw = results;
 }
 
 static void ilk_initial_watermarks(struct intel_crtc_state *cstate)
Signature · 1 line
2.1.4
Signature · 2 lines
Ville Syrjälä
ntel OTC
Signature · 5 lines
Matt Roper
Graphics Software Engineer
IoTG Platform Enabling & Development
Intel Corporation
(916) 356-2795
Signature · 6 lines
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
author
#4 lore raw
Quoted 34 lines · Ville Syrjälä
Quoted 33 lines · Matt Roper
Quoted 31 lines · Ville Syrjälä
Quoted 17 lines · Matt Roper

If all pipes are off, then we may have entered runtime suspend and writing these registers will have no effect anyway. When a pipe is re-enabled, it's crtc_enable will take care of programming appropriate watermark values.

Cc: [email protected]
Cc: [email protected]
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94349

Fixes ed4a6a7ca853 ("drm/i915: Add two-stage ILK-style watermark programming (v11)")

---
I've still been unable to reproduce this defect on my SNB system; none of the suggested tests people have noted in Bugzilla have triggered it for me. But based on the stack trace I'm guessing that the problem happens because we've disabled the last pipe and gone into runtime suspend before we get around to optimizing the watermarks.

Quoted 2 lines

I'm not super familiar with the details of runtime PM, so if there's a better way this should be handled, I'm open to suggestions.

This definitely feels like papering over the problem. Why is the modeset code still calling watermark updates at the wrong time?

With my original two stage wm code most wm updates got kicked off from the plane commits stage, and the only manual calls were in plaform specific code just before a new pipe is enabled, or just after one is disabled. Very little room for these sorts of errors in that scheme. What we have currently isn't done like that and instead it seems to me we've somehow sprinkled stuff all over some common codepaths which apparently leads to these problems.

Quoted 6 lines
Quoted 2 lines

I don't think moving the second stage of watermark programming into device-specific code is the direction we want to go.

In my book the second stage shouldn't even be part of the modeset sequence, and instead if should just be done from a vblank work/etc. which is how I did it.

I agree on this; that's the eventual goal. My earlier iterations of atomic watermarks took this step, but we decided to defer it until later since it clashed with other work Maarten was doing and also added too many moving pieces to the already-complicated watermark series.

Quoted 3 lines

And the first stage stuff is clearly hardware specific since the behavhoir of the wm registers is hardware specific, so trying to shoehorn it all into the common code is IMO a mistake.

Nothing really changed with the first stage except that the computation part has been done earlier (during atomic check phase) and the vfunc that gets called is named differently (initial_watermarks vs update_wm to clarify how it fits into the two-step model).

Matt

Quoted 94 lines
Quoted 90 lines

You're still under
vblank evasion at that point, so you can't wait for vblanks, but even if you could you'd be adding a lot of unnecessary/redundant wait time. The model we have now is to call the 'optimize' helper as soon as we're done with the post-update vblank waiting. In simplified pseudo-code, the logic is:

    for each crtc in state {
        drm_atomic_helper_commit_planes_on_crtc()  // does vbl evade
    }

    if (!legacy cursor hack)
        intel_atomic_wait_for_vblanks();

    for each crtc in state {
        intel_post_plane_update();
    }

    if (modeset)
        intel_display_power_put()

    for each crtc in state
        optimize watermarks

For our code today, I guess the proper fix is to move the optimize step up above the display power put; looks like that PM code changed around a bit while this series was being rebased, so I think the power put was located elsewhere before. It could even be moved into the post_plane_update function if we wanted, but I had kept it separate since ultimately it's going to move out of the atomic_commit altogether.

Longer term, we'll actually be doing the optimize asynchronously via a workqueue task or something (so at an arbitrary future time after the commit is complete); at that point it's even more likely that things have powered down, so I imagine we'll either need to grab the power reference before optimizing watermarks or else just not bother programming them at all in cases where everything is off (which is the approach this patch took).

Anyway, I'll post another patch to move the optimize call up before we drop the power reference; that should also fix the problem as I understand it.

Matt

Quoted 36 lines
Quoted 32 lines

 drivers/gpu/drm/i915/intel_pm.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
drivers/gpu/drm/i915/intel_pm.c +4 -3
index f65e841..8c7fddf 100644
@@ -2802,8 +2802,6 @@ static void ilk_write_wm_values(struct drm_i915_private *dev_priv,
 		I915_WRITE(WM2_LP_ILK, results->wm_lp[1]);
 	if (dirty & WM_DIRTY_LP(3) && previous->wm_lp[2] != results->wm_lp[2])
 		I915_WRITE(WM3_LP_ILK, results->wm_lp[2]);
-
-	dev_priv->wm.hw = *results;
 }
 
 bool ilk_disable_lp_wm(struct drm_device *dev)
@@ -3731,7 +3729,10 @@ static void ilk_program_watermarks(struct drm_i915_private *dev_priv)
 
 	ilk_compute_wm_results(dev, best_lp_wm, partitioning, &results);
 
-	ilk_write_wm_values(dev_priv, &results);
+	if (config.num_pipes_active > 0)
+		ilk_write_wm_values(dev_priv, &results);
+
+	dev_priv->wm.hw = results;
 }
 
 static void ilk_initial_watermarks(struct intel_crtc_state *cstate)
Signature · 1 line
2.1.4
Signature · 2 lines
Ville Syrjälä
ntel OTC
Signature · 5 lines
Matt Roper
Graphics Software Engineer
IoTG Platform Enabling & Development
Intel Corporation
(916) 356-2795
Signature · 2 lines
Ville Syrjälä
Intel OTC
Signature · 9 lines
Matt Roper
Graphics Software Engineer
IoTG Platform Enabling & Development
Intel Corporation
(916) 356-2795
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#5 lore raw

✗ Fi.CI.BAT: failure for drm/i915: Only write watermark registers if a pipe is active

In reply to Matt Roper
== Series Details ==

== Series Details ==

Series: drm/i915: Only write watermark registers if a pipe is active
URL : https://patchwork.freedesktop.org/series/4079/
State : failure

== Summary ==

Series 4079v1 drm/i915: Only write watermark registers if a pipe is active
http://patchwork.freedesktop.org/api/1.0/series/4079/revisions/1/mbox/

Test kms_flip:

        Subgroup basic-flip-vs-modeset:
                dmesg-warn -> PASS       (ilk-hp8440p) UNSTABLE
        Subgroup basic-flip-vs-wf_vblank:
                dmesg-warn -> PASS       (hsw-gt2)
                dmesg-warn -> PASS       (hsw-brixbox)
Test kms_frontbuffer_tracking:
        Subgroup basic:
                fail       -> PASS       (bsw-nuc-2)
Test kms_pipe_crc_basic:
        Subgroup read-crc-pipe-c:
                dmesg-warn -> PASS       (hsw-brixbox)
Test pm_rpm:
        Subgroup basic-pci-d3-state:
                dmesg-warn -> PASS       (snb-dellxps)
bdw-nuci7        total:183  pass:172  dwarn:0   dfail:0   fail:0   skip:11 
bdw-ultra        total:183  pass:165  dwarn:0   dfail:0   fail:0   skip:18 
bsw-nuc-2        total:183  pass:149  dwarn:0   dfail:0   fail:0   skip:34 
byt-nuc          total:183  pass:152  dwarn:0   dfail:0   fail:0   skip:31 
hsw-brixbox      total:183  pass:164  dwarn:0   dfail:0   fail:0   skip:19 
hsw-gt2          total:183  pass:169  dwarn:0   dfail:0   fail:0   skip:14 
ilk-hp8440p      total:183  pass:124  dwarn:1   dfail:0   fail:0   skip:58 
ivb-t430s        total:183  pass:162  dwarn:0   dfail:0   fail:0   skip:21 
skl-i5k-2        total:183  pass:163  dwarn:0   dfail:0   fail:0   skip:20 
skl-i7k-2        total:183  pass:163  dwarn:0   dfail:0   fail:0   skip:20 
snb-dellxps      total:183  pass:154  dwarn:0   dfail:0   fail:0   skip:29 

Results at /archive/results/CI_IGT_test/Patchwork_1527/

91a38d589cb775a4486cec599413f581b2e8f437 drm-intel-nightly: 2016y-03m-03d-17h-31m-44s UTC integration manifest 7c9f7edf9a8c14f7c76a5589dba362a64848d477 drm/i915: Only write watermark registers if a pipe is active

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#6 lore raw

✓ Fi.CI.BAT: success for drm/i915: Only write watermark registers if a pipe is active

In reply to Matt Roper
== Series Details ==

== Series Details ==

Series: drm/i915: Only write watermark registers if a pipe is active
URL : https://patchwork.freedesktop.org/series/4079/
State : success

== Summary ==

Series 4079v1 drm/i915: Only write watermark registers if a pipe is active
http://patchwork.freedesktop.org/api/1.0/series/4079/revisions/1/mbox/

Test kms_flip:

        Subgroup basic-flip-vs-modeset:
                dmesg-warn -> PASS       (ilk-hp8440p) UNSTABLE
        Subgroup basic-flip-vs-wf_vblank:
                dmesg-warn -> PASS       (hsw-gt2)
                dmesg-warn -> PASS       (hsw-brixbox)
Test kms_frontbuffer_tracking:
        Subgroup basic:
                fail       -> PASS       (bsw-nuc-2)
Test kms_pipe_crc_basic:
        Subgroup read-crc-pipe-c:
                dmesg-warn -> PASS       (hsw-brixbox)
Test pm_rpm:
        Subgroup basic-pci-d3-state:
                dmesg-warn -> PASS       (snb-dellxps)
bdw-nuci7        total:183  pass:172  dwarn:0   dfail:0   fail:0   skip:11 
bdw-ultra        total:183  pass:165  dwarn:0   dfail:0   fail:0   skip:18 
bsw-nuc-2        total:183  pass:149  dwarn:0   dfail:0   fail:0   skip:34 
byt-nuc          total:183  pass:152  dwarn:0   dfail:0   fail:0   skip:31 
hsw-brixbox      total:183  pass:164  dwarn:0   dfail:0   fail:0   skip:19 
hsw-gt2          total:183  pass:169  dwarn:0   dfail:0   fail:0   skip:14 
ilk-hp8440p      total:183  pass:124  dwarn:1   dfail:0   fail:0   skip:58 
ivb-t430s        total:183  pass:162  dwarn:0   dfail:0   fail:0   skip:21 
skl-i5k-2        total:183  pass:163  dwarn:0   dfail:0   fail:0   skip:20 
skl-i7k-2        total:183  pass:163  dwarn:0   dfail:0   fail:0   skip:20 
snb-dellxps      total:183  pass:154  dwarn:0   dfail:0   fail:0   skip:29 

Results at /archive/results/CI_IGT_test/Patchwork_1527/

91a38d589cb775a4486cec599413f581b2e8f437 drm-intel-nightly: 2016y-03m-03d-17h-31m-44s UTC integration manifest 7c9f7edf9a8c14f7c76a5589dba362a64848d477 drm/i915: Only write watermark registers if a pipe is active

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx