serial: pl011: add mark/space parity support
PATCH 1/1 serial: pl011: add mark/space parity support
PL011 UART has hardware mark/space parity ability, this trivial patch adds support for it. Tested on Raspberry Pi v1, v2 (BCM2835 and BCM2836)
Signed-off-by Ed Spiridonov <[email protected]>
--- drivers/tty/serial/amba-pl011.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/tty/serial/amba-pl011.c +2 -0
@@ -1947,6 +1947,8 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios, lcr_h |= UART01x_LCRH_PEN;if (!(termios->c_cflag &PARODD )) lcr_h |= UART01x_LCRH_EPS; +if (termios->c_cflag &CMSPAR ) + lcr_h |=UART011_LCRH_SPS ; }if (uap->fifosize >1 ) lcr_h |= UART01x_LCRH_FEN;
Signature · 1 line
2.7.0