Skip to contentSkip to conversation

Radeon HDMI audio in 2.6.33 kernel ???

DISCUSSION [email protected] 2 participants 2 messages Jan 27, 2010

lore
Share & tools
lore
#0 lore raw

Hello,

I'm not sure I'm at the right place (please, if not, tell me where I can find a solution...) but I have a problem with multimedia hardware. So, I've changed my graphic card and I've bought an ATI Radeon HD 4550. My goal is to use only an HDMI cable between my computer and my AV amplifier. I've installed Debian Sid but I can't have any sound... Everything seems OK with Alsa (and PulseAudio), but no sound !!!

With google, I've found this :
http://www.phoronix.com/scan.php?page=news_item&px=NzgxMA
[I should need a 2.6.33 kernel to have HDMI support with ATI cards] So, I've compiled the 2.6.33RC5 kernel, but no difference !!!

The card seems to be OK :

# aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: HDMI [HDA ATI HDMI], device 3: ATI HDMI [ATI HDMI]
  Subdevices: 1/1
  Subdevice #0: subdevice #0

Do you have any idea ?

Thank you.

David.

#1 lore raw

At Wed, 27 Jan 2010 11:17:04 +0100,

Quoted 10 lines · <[email protected]> wrote:

Hello,

I'm not sure I'm at the right place (please, if not, tell me where I can find a solution...) but I have a problem with multimedia hardware. So, I've changed my graphic card and I've bought an ATI Radeon HD 4550. My goal is to use only an HDMI cable between my computer and my AV amplifier. I've installed Debian Sid but I can't have any sound... Everything seems OK with Alsa (and PulseAudio), but no sound !!!

How did you test it?

Quoted 5 lines

With google, I've found this :
http://www.phoronix.com/scan.php?page=news_item&px=NzgxMA
[I should need a 2.6.33 kernel to have HDMI support with ATI cards] So, I've compiled the 2.6.33RC5 kernel, but no difference !!!

Quoted 8 lines

The card seems to be OK :

# aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: HDMI [HDA ATI HDMI], device 3: ATI HDMI [ATI HDMI]
  Subdevices: 1/1
  Subdevice #0: subdevice #0

Do you have any idea ?

If the audio codec is detected, a possible problem is the video driver side. The HDMI is handled rather in the video chip, and it has usually a register switch to enable/disable HDMI audio. Similarly, the EDID handling can break the audio handling, too.

If it's really a problem of the audio codec, you can try to move the corresponding codec id from patch_atihdmi.c to patch_intelhdmi.c. (don't forget MODULE_ALIAS() there, too).

Takashi