drm/i915/bxt: Fix off-by-one error in Broxton PLL IDs
Subsystems (2)
PATCH 1/1 drm/i915/bxt: Fix off-by-one error in Broxton PLL IDs
After the commit below the Broxton PLL IDs had an off-by-one error, so fix this up. Also add a missing brace at intel_shared_dpll_init(), it happened to compile only due to the way the IS_BROXTON macro is defined.
--- drivers/gpu/drm/i915/intel_display.c | 9 ++++++--- drivers/gpu/drm/i915/intel_dpll_mgr.c | 8 ++++---- 2 files changed, 10 insertions(+), 7 deletions(-)
drivers/gpu/drm/i915/intel_display.c +6 -3
@@ -9762,21 +9762,24 @@ static void bxt_get_ddi_pll(struct drm_i915_private *dev_priv,switch (port) {case PORT_A : pipe_config->ddi_pll_sel =SKL_DPLL0 ; - id =DPLL_ID_SKL_DPLL1 ; + id =DPLL_ID_SKL_DPLL0 ;break ;case PORT_B : pipe_config->ddi_pll_sel =SKL_DPLL1 ; - id =DPLL_ID_SKL_DPLL2 ; + id =DPLL_ID_SKL_DPLL1 ;break ;case PORT_C : pipe_config->ddi_pll_sel =SKL_DPLL2 ; - id =DPLL_ID_SKL_DPLL3 ; + id =DPLL_ID_SKL_DPLL2 ;break ;default :DRM_ERROR ("Incorrect port type\n" );return ; } +DRM_DEBUG_DRIVER ("port %c PLL id %d\n" ,port_name (port), + id); + pipe_config->shared_dpll =intel_get_shared_dpll_by_id (dev_priv, id); }
drivers/gpu/drm/i915/intel_dpll_mgr.c +4 -4
@@ -1706,9 +1706,9 @@ static const struct intel_dpll_mgr skl_pll_mgr = { };static const struct dpll_info bxt_plls[] = { - {"PORT PLL A" ,0 , &bxt_ddi_pll_funcs,0 }, - {"PORT PLL B" ,1 , &bxt_ddi_pll_funcs,0 }, - {"PORT PLL C" ,2 , &bxt_ddi_pll_funcs,0 }, + {"PORT PLL A" ,DPLL_ID_SKL_DPLL0 , &bxt_ddi_pll_funcs,0 }, + {"PORT PLL B" ,DPLL_ID_SKL_DPLL1 , &bxt_ddi_pll_funcs,0 }, + {"PORT PLL C" ,DPLL_ID_SKL_DPLL2 , &bxt_ddi_pll_funcs,0 }, {NULL ,-1 ,NULL , }, };
@@ -1726,7 +1726,7 @@ void intel_shared_dpll_init(struct drm_device *dev)if (IS_SKYLAKE (dev) ||IS_KABYLAKE (dev)) dpll_mgr = &skl_pll_mgr; - else if IS_BROXTON(dev) +else if (IS_BROXTON (dev)) dpll_mgr = &bxt_pll_mgr;else if (HAS_DDI (dev)) dpll_mgr = &hsw_pll_mgr;
Signature · 6 lines
2.5.0 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v2 1/1 drm/i915/bxt: Fix off-by-one error in Broxton PLL IDs
After the commit below the Broxton PLL IDs had an off-by-one error, so fix this up. Also add a missing brace at intel_shared_dpll_init(), it happened to compile only due to the way the IS_BROXTON macro is defined.
v2:
- remove debugging left-over
--- drivers/gpu/drm/i915/intel_display.c | 6 +++--- drivers/gpu/drm/i915/intel_dpll_mgr.c | 8 ++++---- 2 files changed, 7 insertions(+), 7 deletions(-)
drivers/gpu/drm/i915/intel_display.c +3 -3
@@ -9762,15 +9762,15 @@ static void bxt_get_ddi_pll(struct drm_i915_private *dev_priv,switch (port) {case PORT_A : pipe_config->ddi_pll_sel =SKL_DPLL0 ; - id =DPLL_ID_SKL_DPLL1 ; + id =DPLL_ID_SKL_DPLL0 ;break ;case PORT_B : pipe_config->ddi_pll_sel =SKL_DPLL1 ; - id =DPLL_ID_SKL_DPLL2 ; + id =DPLL_ID_SKL_DPLL1 ;break ;case PORT_C : pipe_config->ddi_pll_sel =SKL_DPLL2 ; - id =DPLL_ID_SKL_DPLL3 ; + id =DPLL_ID_SKL_DPLL2 ;break ;default :DRM_ERROR ("Incorrect port type\n" );
drivers/gpu/drm/i915/intel_dpll_mgr.c +4 -4
@@ -1706,9 +1706,9 @@ static const struct intel_dpll_mgr skl_pll_mgr = { };static const struct dpll_info bxt_plls[] = { - {"PORT PLL A" ,0 , &bxt_ddi_pll_funcs,0 }, - {"PORT PLL B" ,1 , &bxt_ddi_pll_funcs,0 }, - {"PORT PLL C" ,2 , &bxt_ddi_pll_funcs,0 }, + {"PORT PLL A" ,DPLL_ID_SKL_DPLL0 , &bxt_ddi_pll_funcs,0 }, + {"PORT PLL B" ,DPLL_ID_SKL_DPLL1 , &bxt_ddi_pll_funcs,0 }, + {"PORT PLL C" ,DPLL_ID_SKL_DPLL2 , &bxt_ddi_pll_funcs,0 }, {NULL ,-1 ,NULL , }, };
@@ -1726,7 +1726,7 @@ void intel_shared_dpll_init(struct drm_device *dev)if (IS_SKYLAKE (dev) ||IS_KABYLAKE (dev)) dpll_mgr = &skl_pll_mgr; - else if IS_BROXTON(dev) +else if (IS_BROXTON (dev)) dpll_mgr = &bxt_pll_mgr;else if (HAS_DDI (dev)) dpll_mgr = &hsw_pll_mgr;
Signature · 6 lines
2.5.0 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 29 lines · Imre Deak
After the commit below the Broxton PLL IDs had an off-by-one error, so fix this up. Also add a missing brace at
intel_shared_dpll_init(), it happened to compile only due to the way theIS_BROXTONmacro is defined.v2:
- remove debugging left-overFixes a3c988ea068c ("drm/i915: Make SKL/KBL DPLL0 managed by the shared dpllcode")
CC Ander Conselvan de Oliveira <[email protected]>CC Maarten Lankhorst <[email protected]>Signed-off-by Imre Deak <[email protected]>--- drivers/gpu/drm/i915/intel_display.c | 6 +++--- drivers/gpu/drm/i915/intel_dpll_mgr.c | 8 ++++---- 2 files changed, 7 insertions(+), 7 deletions(-)drivers/gpu/drm/i915/intel_display.c +1
-1@@ -9762,15 +9762,15 @@ static void bxt_get_ddi_pll(struct drm_i915_private *dev_priv, switch (port) {case PORT_A : pipe_config->ddi_pll_sel =SKL_DPLL0 ; - id =DPLL_ID_SKL_DPLL1 ; + id =DPLL_ID_SKL_DPLL0 ;
drivers/gpu/drm/i915/intel_display.c static void bxt_get_ddi_pll(struct drm_i915_private · line 9774
Quoted 10 lines
drivers/gpu/drm/i915/intel_display.c +2
-2break ;case PORT_B : pipe_config->ddi_pll_sel =SKL_DPLL1 ; - id =DPLL_ID_SKL_DPLL2 ; + id =DPLL_ID_SKL_DPLL1 ;break ;case PORT_C : pipe_config->ddi_pll_sel =SKL_DPLL2 ; - id =DPLL_ID_SKL_DPLL3 ; + id =DPLL_ID_SKL_DPLL2 ;
Hmm, I think the mistake is that BXT relied on SKL DPLL ids in the first place. This is fine as a fix up, but maybe it would be better to just add separate ids for broxton too. Or even better, get rid of pll->id.
Quoted 22 lines
drivers/gpu/drm/i915/intel_display.c +0
-0break ;default :drivers/gpu/drm/i915/intel_display.c +0
-0DRM_ERROR ("Incorrect port type\n" );drivers/gpu/drm/i915/intel_dpll_mgr.c +3
-3@@ -1706,9 +1706,9 @@ static const struct intel_dpll_mgr skl_pll_mgr = { };static const struct dpll_info bxt_plls[] = { - {"PORT PLL A" ,0 , &bxt_ddi_pll_funcs,0 }, - {"PORT PLL B" ,1 , &bxt_ddi_pll_funcs,0 }, - {"PORT PLL C" ,2 , &bxt_ddi_pll_funcs,0 }, + {"PORT PLL A" ,DPLL_ID_SKL_DPLL0 , &bxt_ddi_pll_funcs,0 }, + {"PORT PLL B" ,DPLL_ID_SKL_DPLL1 , &bxt_ddi_pll_funcs,0 }, + {"PORT PLL C" ,DPLL_ID_SKL_DPLL2 , &bxt_ddi_pll_funcs,0 }, {NULL ,-1 ,NULL , }, };
drivers/gpu/drm/i915/intel_dpll_mgr.c void intel_shared_dpll_init(struct drm_device *dev) · line 1729
Quoted 5 lines
drivers/gpu/drm/i915/intel_dpll_mgr.c +1
-1@@ -1726,7 +1726,7 @@ void intel_shared_dpll_init(struct drm_device *dev)if (IS_SKYLAKE (dev) ||IS_KABYLAKE (dev)) dpll_mgr = &skl_pll_mgr; - else if IS_BROXTON(dev) +else if (IS_BROXTON (dev))
Wow, really don't know how I managed to do this. Thanks for fixing.
drivers/gpu/drm/i915/intel_dpll_mgr.c void intel_shared_dpll_init(struct drm_device *dev) · line 1732
Quoted 3 lines
drivers/gpu/drm/i915/intel_dpll_mgr.c +0
-0dpll_mgr = &bxt_pll_mgr; else if (HAS_DDI(dev)) dpll_mgr = &hsw_pll_mgr;
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 44 lines · Ander Conselvan De Oliveira
Quoted 43 lines · Imre Deak
After the commit below the Broxton PLL IDs had an off-by-one error, so
fix this up. Also add a missing brace atintel_shared_dpll_init(), it
happened to compile only due to the way theIS_BROXTONmacro is defined.v2:
- remove debugging left-overFixes a3c988ea068c ("drm/i915: Make SKL/KBL DPLL0 managed by theshared dpll
code")
CC: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel. com>CC Maarten Lankhorst <[email protected]>Signed-off-by Imre Deak <[email protected]>---
drivers/gpu/drm/i915/intel_display.c | 6 +++---drivers/gpu/drm/i915/intel_dpll_mgr.c| 8 ++++----2 files changed, 7 insertions(+), 7 deletions(-)drivers/gpu/drm/i915/intel_display.c +0
-0@@ -9762,15 +9762,15 @@ static void bxt_get_ddi_pll(struct
drm_i915_private*dev_priv,
switch (port) {
casePORT_A:
pipe_config->ddi_pll_sel=SKL_DPLL0;drivers/gpu/drm/i915/intel_display.c +1
-1- id =DPLL_ID_SKL_DPLL1 ; + id =DPLL_ID_SKL_DPLL0 ;break;
casePORT_B:
pipe_config->ddi_pll_sel=SKL_DPLL1;drivers/gpu/drm/i915/intel_display.c +1
-1- id =DPLL_ID_SKL_DPLL2 ; + id =DPLL_ID_SKL_DPLL1 ;break;
casePORT_C:
pipe_config->ddi_pll_sel=SKL_DPLL2;
Quoted 8 lines
drivers/gpu/drm/i915/intel_display.c static void bxt_get_ddi_pll(struct drm_i915_private *dev_priv, · line 9773
Quoted 2 lines
drivers/gpu/drm/i915/intel_display.c +1
-1- id =DPLL_ID_SKL_DPLL3 ; + id =DPLL_ID_SKL_DPLL2 ;Hmm, I think the mistake is that BXT relied on SKL DPLL ids in the first place.
This is fine as a fix up, but maybe it would be better to just add separate ids
for broxton too. Or even better, get rid ofpll->id.
Yes, SKL_DPLLx and DPLL_ID_SKL_DPLLx that were defined originally had confusingly different indexes already, not sure for the reason for that. Removing 'id' if possible seems like a good idea.
Quoted 36 lines
Quoted 31 lines
break;
default:
DRM_ERROR("Incorrect port type\n");drivers/gpu/drm/i915/intel_dpll_mgr.c +0
-0@@ -1706,9 +1706,9 @@ static const struct intel_dpll_mgr skl_pll_mgr = { };
static const structdpll_infobxt_plls[] = {drivers/gpu/drm/i915/intel_dpll_mgr.c +1
-3- { "PORT PLL A", 0, &bxt_ddi_pll_funcs, 0 }, - { "PORT PLL B", 1, &bxt_ddi_pll_funcs, 0 }, - { "PORT PLL C", 2, &bxt_ddi_pll_funcs, 0 }, + {"PORT PLL A" ,DPLL_ID_SKL_DPLL0 , &bxt_ddi_pll_funcs,0 },
drivers/gpu/drm/i915/intel_dpll_mgr.c +1
-0+ {"PORT PLL B" ,DPLL_ID_SKL_DPLL1 , &bxt_ddi_pll_funcs,0 },
drivers/gpu/drm/i915/intel_dpll_mgr.c +1
-0+ {"PORT PLL C" ,DPLL_ID_SKL_DPLL2 , &bxt_ddi_pll_funcs,0 },
{ NULL, -1, NULL, },
};drivers/gpu/drm/i915/intel_dpll_mgr.c +0
-0@@ -1726,7 +1726,7 @@ void intel_shared_dpll_init(struct drm_device *dev)
if (IS_SKYLAKE(dev)||IS_KABYLAKE(dev))
dpll_mgr=&skl_pll_mgr;drivers/gpu/drm/i915/intel_dpll_mgr.c void intel_shared_dpll_init(struct drm_device *dev) · line 1729
Quoted 2 lines
drivers/gpu/drm/i915/intel_dpll_mgr.c +1
-1- else if IS_BROXTON(dev) +else if (IS_BROXTON (dev))Wow, really don't know how I managed to do this. Thanks for fixing.
Quoted 1 line
Reviewed-by Ander Conselvan de Oliveira <[email protected]>
Thanks for the review.
Quoted 4 lines
Quoted 4 lines
dpll_mgr=&bxt_pll_mgr;
else if (HAS_DDI(dev))
dpll_mgr=&hsw_pll_mgr;
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH RESEND 1/1 drm/i915/bxt: Fix off-by-one error in Broxton PLL IDs
In reply to Imre DeakAfter the commit below the Broxton PLL IDs had an off-by-one error, so fix this up. Also add a missing brace at intel_shared_dpll_init(), it happened to compile only due to the way the IS_BROXTON macro is defined.
v2:
- remove debugging left-over
--- drivers/gpu/drm/i915/intel_display.c | 6 +++--- drivers/gpu/drm/i915/intel_dpll_mgr.c | 8 ++++---- 2 files changed, 7 insertions(+), 7 deletions(-)
drivers/gpu/drm/i915/intel_display.c +3 -3
@@ -9778,15 +9778,15 @@ static void bxt_get_ddi_pll(struct drm_i915_private *dev_priv,switch (port) {case PORT_A : pipe_config->ddi_pll_sel =SKL_DPLL0 ; - id =DPLL_ID_SKL_DPLL1 ; + id =DPLL_ID_SKL_DPLL0 ;break ;case PORT_B : pipe_config->ddi_pll_sel =SKL_DPLL1 ; - id =DPLL_ID_SKL_DPLL2 ; + id =DPLL_ID_SKL_DPLL1 ;break ;case PORT_C : pipe_config->ddi_pll_sel =SKL_DPLL2 ; - id =DPLL_ID_SKL_DPLL3 ; + id =DPLL_ID_SKL_DPLL2 ;break ;default :DRM_ERROR ("Incorrect port type\n" );
drivers/gpu/drm/i915/intel_dpll_mgr.c +4 -4
@@ -1706,9 +1706,9 @@ static const struct intel_dpll_mgr skl_pll_mgr = { };static const struct dpll_info bxt_plls[] = { - {"PORT PLL A" ,0 , &bxt_ddi_pll_funcs,0 }, - {"PORT PLL B" ,1 , &bxt_ddi_pll_funcs,0 }, - {"PORT PLL C" ,2 , &bxt_ddi_pll_funcs,0 }, + {"PORT PLL A" ,DPLL_ID_SKL_DPLL0 , &bxt_ddi_pll_funcs,0 }, + {"PORT PLL B" ,DPLL_ID_SKL_DPLL1 , &bxt_ddi_pll_funcs,0 }, + {"PORT PLL C" ,DPLL_ID_SKL_DPLL2 , &bxt_ddi_pll_funcs,0 }, {NULL ,-1 ,NULL , }, };
@@ -1726,7 +1726,7 @@ void intel_shared_dpll_init(struct drm_device *dev)if (IS_SKYLAKE (dev) ||IS_KABYLAKE (dev)) dpll_mgr = &skl_pll_mgr; - else if IS_BROXTON(dev) +else if (IS_BROXTON (dev)) dpll_mgr = &bxt_pll_mgr;else if (HAS_DDI (dev)) dpll_mgr = &hsw_pll_mgr;
Signature · 6 lines
2.5.0 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.BAT: failure for drm/i915/bxt: Fix off-by-one error in Broxton PLL IDs (rev3)
In reply to Imre Deak== Series Details ==
== Series Details ==
Series: drm/i915/bxt: Fix off-by-one error in Broxton PLL IDs (rev3)
URL : https://patchwork.freedesktop.org/series/4444/
State : failure
== Summary ==
Series 4444v3 drm/i915/bxt: Fix off-by-one error in Broxton PLL IDs
http://patchwork.freedesktop.org/api/1.0/series/4444/revisions/3/mbox/
Test drv_module_reload_basic:
skip -> PASS (bdw-nuci7)
Test gem_ringfill:
Subgroup basic-default-s3:
pass -> DMESG-WARN (skl-nuci5)
Test gem_storedw_loop:
Subgroup basic-bsd:
pass -> DMESG-WARN (skl-nuci5)
Subgroup basic-bsd1:
pass -> DMESG-WARN (skl-nuci5)
Test kms_flip:
Subgroup basic-flip-vs-wf_vblank:
dmesg-warn -> PASS (hsw-brixbox)
pass -> DMESG-WARN (bdw-ultra)
Subgroup basic-plain-flip:
pass -> DMESG-WARN (hsw-gt2)
Test kms_pipe_crc_basic:
Subgroup read-crc-pipe-c:
fail -> PASS (hsw-brixbox)
Subgroup suspend-read-crc-pipe-b:
dmesg-warn -> PASS (skl-nuci5)
Subgroup suspend-read-crc-pipe-c:
pass -> INCOMPLETE (skl-nuci5)
Test pm_rpm:
Subgroup basic-pci-d3-state:
pass -> DMESG-WARN (snb-dellxps)
Subgroup basic-rte:
pass -> DMESG-WARN (bsw-nuc-2)bdw-nuci7 total:194 pass:182 dwarn:0 dfail:0 fail:0 skip:12 bdw-ultra total:194 pass:172 dwarn:1 dfail:0 fail:0 skip:21 bsw-nuc-2 total:194 pass:156 dwarn:1 dfail:0 fail:0 skip:37 byt-nuc total:194 pass:155 dwarn:4 dfail:0 fail:0 skip:35 hsw-brixbox total:194 pass:172 dwarn:0 dfail:0 fail:0 skip:22 hsw-gt2 total:194 pass:176 dwarn:1 dfail:0 fail:0 skip:17 ivb-t430s total:194 pass:169 dwarn:0 dfail:0 fail:0 skip:25 skl-i5k-2 total:194 pass:171 dwarn:0 dfail:0 fail:0 skip:23 skl-i7k-2 total:194 pass:171 dwarn:0 dfail:0 fail:0 skip:23 skl-nuci5 total:152 pass:138 dwarn:3 dfail:0 fail:0 skip:10 snb-dellxps total:194 pass:158 dwarn:2 dfail:0 fail:0 skip:34
Results at /archive/results/CI_IGT_test/Patchwork_1607/
fc881ebd9c3c26919c7d1113f8bf7014e1a05563 drm-intel-nightly: 2016y-03m-15d-13h-10m-41s UTC integration manifest 7cb417d02e1ff8af6261f9a159470dc61ae0faa7 drm/i915/bxt: Fix off-by-one error in Broxton PLL IDs
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: ✗ Fi.CI.BAT: failure for drm/i915/bxt: Fix off-by-one error in Broxton PLL IDs (rev3)
Tomi, noticed two things that maybe infrastructure related, see below:
Quoted 12 lines · Patchwork
== Series Details ==
Series: drm/i915/bxt: Fix off-by-one error in Broxton PLL IDs (rev3) URL : https://patchwork.freedesktop.org/series/4444/
State : failure== Summary ==
Series 4444v3 drm/i915/bxt: Fix off-by-one error in Broxton PLL IDs
http://patchwork.freedesktop.org/api/1.0/series/4444/revisions/3/mbox
/
Quoted 10 lines
Test
drv_module_reload_basic:
skip -> PASS (bdw-nuci7) Testgem_ringfill:
Subgroup basic-default-s3:
pass -> DMESG-WARN (skl-nuci5) Testgem_storedw_loop:
Subgroup basic-bsd:
pass -> DMESG-WARN (skl-nuci5) Subgroup basic-bsd1:
pass -> DMESG-WARN (skl-nuci5)
Unrelated platform. All of the above are SND resume failures. Ville said he contacted Takashi about them.
Quoted 4 lines
Test
kms_flip:
Subgroup basic-flip-vs-wf_vblank:
dmesg-warn -> PASS (hsw-brixbox) pass -> DMESG-WARN (bdw-ultra)
Unrelated platform.
Tomi, there are ACPI erros in the log, maybe needs a BIOS upgrade? It's also affected by
https://bugs.freedesktop.org/show_bug.cgi?id=94349
Quoted 2 lines
Subgroup basic-plain-flip:
pass -> DMESG-WARN (hsw-gt2)
Unrelated platform:
https://patchwork.freedesktop.org/patch/75903/
Quoted 7 lines
Test
kms_pipe_crc_basic:
Subgroup read-crc-pipe-c:
fail -> PASS (hsw-brixbox) Subgroup suspend-read-crc-pipe-b:
dmesg-warn -> PASS (skl-nuci5) Subgroup suspend-read-crc-pipe-c:
pass -> INCOMPLETE (skl-nuci5)
Unrelated platform, I opened a new bug:
https://bugs.freedesktop.org/show_bug.cgi?id=94566
Quoted 3 lines
Test
pm_rpm:
Subgroup basic-pci-d3-state:
pass -> DMESG-WARN (snb-dellxps)
Unrelated platform:
https://patchwork.freedesktop.org/patch/75903/
Quoted 2 lines
Subgroup basic-rte:
pass -> DMESG-WARN (bsw-nuc-2)
Unrelated platform:
https://bugs.freedesktop.org/show_bug.cgi?id=94164
Tomi, basic-rte has also DMESG-WARN on snb-dellxps, yet not on this list.
--Imre
Quoted 32 lines
bdw-
nuci7 total:194 pass:182 dwarn:0 dfail:0 fail:0 skip:1 2
bdw-
ultra total:194 pass:172 dwarn:1 dfail:0 fail:0 skip:2 1
bsw-nuc-
2 total:194 pass:156 dwarn:1 dfail:0 fail:0 skip:37 byt-
nuc total:194 pass:155 dwarn:4 dfail:0 fail:0 skip:3 5
hsw-
brixbox total:194 pass:172 dwarn:0 dfail:0 fail:0 skip:2 2
hsw-
gt2 total:194 pass:176 dwarn:1 dfail:0 fail:0 skip:1 7
ivb-
t430s total:194 pass:169 dwarn:0 dfail:0 fail:0 skip:2 5
skl-i5k-
2 total:194 pass:171 dwarn:0 dfail:0 fail:0 skip:23 skl-i7k-
2 total:194 pass:171 dwarn:0 dfail:0 fail:0 skip:23 skl-
nuci5 total:152 pass:138 dwarn:3 dfail:0 fail:0 skip:1 0
snb-
dellxps total:194 pass:158 dwarn:2 dfail:0 fail:0 skip:3 4
Quoted 7 lines
Results at /archive/results/CI_IGT_test/Patchwork_1607/
fc881ebd9c3c26919c7d1113f8bf7014e1a05563drm-intel-nightly: 2016y- 03m-15d-13h-10m-41s UTC integration manifest7cb417d02e1ff8af6261f9a159470dc61ae0faa7drm/i915/bxt: Fix off-by-one error in Broxton PLL IDs
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: ✗ Fi.CI.BAT: failure for drm/i915/bxt: Fix off-by-one error in Broxton PLL IDs (rev3)
Quoted 13 lines · On Wednesday 16 March 2016 10:48:43 Imre Deak wrote:
Tomi, noticed two things that maybe infrastructure related, see below:
Quoted 10 lines
Test
drv_module_reload_basic:skip -> PASS (bdw-nuci7) Test gem_ringfill: Subgroup basic-default-s3: pass -> DMESG-WARN (skl-nuci5) Test gem_storedw_loop: Subgroup basic-bsd: pass -> DMESG-WARN (skl-nuci5) Subgroup basic-bsd1: pass -> DMESG-WARN (skl-nuci5)
Quoted 2 lines
Unrelated platform. All of the above are SND resume failures. Ville said he contacted Takashi about them.
SND is recurring problem. I'd like to see drm-intel-nightly not breaking when pulling sound updates.
Quoted 9 lines
Quoted 4 lines
Test
kms_flip:Subgroup basic-flip-vs-wf_vblank: dmesg-warn -> PASS (hsw-brixbox) pass -> DMESG-WARN (bdw-ultra)Unrelated platform.
Tomi, there are ACPI erros in the log, maybe needs a BIOS upgrade? It's also affected by
https://bugs.freedesktop.org/show_bug.cgi?id=94349
Brixbox is at the newest BIOS available. Did you mean Intel Ultrabook 2in1?
Quoted 10 lines
Quoted 7 lines
Test
kms_pipe_crc_basic:Subgroup read-crc-pipe-c: fail -> PASS (hsw-brixbox) Subgroup suspend-read-crc-pipe-b: dmesg-warn -> PASS (skl-nuci5) Subgroup suspend-read-crc-pipe-c: pass -> INCOMPLETE (skl-nuci5)Unrelated platform, I opened a new bug:
https://bugs.freedesktop.org/show_bug.cgi?id=94566
Suspend-read-crc-pipes are notoriously unstable, and main reason (in addition to drv_module_reload_basic) to hangs.
Quoted 2 lines
Tomi, basic-rte has also DMESG-WARN on snb-dellxps, yet not on this list.
SNB-dellxps is in a bad state, there's alsa blocking shutdown and startup within set timelimits. It'll be probably out until snd is fixed.
Tomi
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: ✗ Fi.CI.BAT: failure for drm/i915/bxt: Fix off-by-one error in Broxton PLL IDs (rev3)
Quoted 27 lines · Tomi Sarvela
Quoted 14 lines · On Wednesday 16 March 2016 10:48:43 Imre Deak wrote:
Tomi, noticed two things that maybe infrastructure related, see below:
Quoted 10 lines
Test
drv_module_reload_basic:
skip -> PASS (bdw-nuci7) Testgem_ringfill:
Subgroup basic-default-s3:
pass -> DMESG-WARN (skl-nuci5) Testgem_storedw_loop:
Subgroup basic-bsd:
pass -> DMESG-WARN (skl-nuci5) Subgroup basic-bsd1:
pass -> DMESG-WARN (skl-nuci5)Quoted 2 lines
Unrelated platform. All of the above are SND resume failures. Ville said he contacted Takashi about them.
SND is recurring problem. I'd like to see drm-intel-nightly not breaking when
pulling sound updates.Quoted 5 lines
Quoted 4 lines
Test
kms_flip:
Subgroup basic-flip-vs-wf_vblank:
dmesg-warn -> PASS (hsw-brixbox) pass -> DMESG-WARN (bdw-ultra)
Quoted 8 lines
Quoted 5 lines
Unrelated platform.
Tomi, there are ACPI erros in the log, maybe needs a BIOS upgrade? It's
also affected by
https://bugs.freedesktop.org/show_bug.cgi?id=94349Brixbox is at the newest BIOS available. Did you mean Intel Ultrabook 2in1?
No not that one but the above bdw-ultra. See the ACPI errors in archive/results/CI_IGT_test/Patchwork_1607/bdw-ultra/html/bdw-ultra@Patchwork_1607@1/igt@kms_flip@basic-flip-vs-wf_vblank.html
--Imre
Quoted 16 lines
Quoted 11 lines
Quoted 8 lines
Test
kms_pipe_crc_basic:
Subgroup read-crc-pipe-c:
fail -> PASS (hsw-brixbox) Subgroup suspend-read-crc-pipe-b:
dmesg-warn -> PASS (skl-nuci5) Subgroup suspend-read-crc-pipe-c:
pass -> INCOMPLETE (skl-nuci5)Unrelated platform, I opened a new bug:
https://bugs.freedesktop.org/show_bug.cgi?id=94566Suspend-read-crc-pipes are notoriously unstable, and main reason (in addition
todrv_module_reload_basic) to hangs.
Quoted 8 lines
Quoted 2 lines
Tomi, basic-rte has also DMESG-WARN on snb-dellxps, yet not on this list.
SNB-dellxps is in a bad state, there's alsa blocking shutdown and startup
within set timelimits. It'll be probably out until snd is fixed.Tomi
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: ✗ Fi.CI.BAT: failure for drm/i915/bxt: Fix off-by-one error in Broxton PLL IDs (rev3)
In reply to Tomi SarvelaQuoted 14 lines · Tomi Sarvela
Quoted 13 lines · On Wednesday 16 March 2016 10:48:43 Imre Deak wrote:
Tomi, noticed two things that maybe infrastructure related, see below:
Quoted 10 lines
Test
drv_module_reload_basic:skip -> PASS (bdw-nuci7) Test gem_ringfill: Subgroup basic-default-s3: pass -> DMESG-WARN (skl-nuci5) Test gem_storedw_loop: Subgroup basic-bsd: pass -> DMESG-WARN (skl-nuci5) Subgroup basic-bsd1: pass -> DMESG-WARN (skl-nuci5)
Quoted 5 lines
Quoted 2 lines
Unrelated platform. All of the above are SND resume failures. Ville said he contacted Takashi about them.
SND is recurring problem. I'd like to see drm-intel-nightly not breaking when pulling sound updates.
We need to escalate this again, snd team seriously sucks at quality control :( Adding Libin&Takashi. If this doesn't improve I need to throw sound trees out of -nightly for real.
-Daniel
Signature · 7 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [Intel-gfx] ✗ Fi.CI.BAT: failure for drm/i915/bxt: Fix off-by-one error in Broxton PLL IDs (rev3)
Quoted 19 lines · Daniel Vetter
Quoted 17 lines · Tomi Sarvela
Quoted 15 lines · On Wednesday 16 March 2016 10:48:43 Imre Deak wrote:
Tomi, noticed two things that maybe infrastructure related, see below:
Quoted 10 lines
Test
drv_module_reload_basic:skip -> PASS (bdw-nuci7) Test gem_ringfill: Subgroup basic-default-s3: pass -> DMESG-WARN (skl-nuci5) Test gem_storedw_loop: Subgroup basic-bsd: pass -> DMESG-WARN (skl-nuci5) Subgroup basic-bsd1: pass -> DMESG-WARN (skl-nuci5)Unrelated platform. All of the above are SND resume failures. Ville said he contacted Takashi about them.
Quoted 6 lines
Quoted 2 lines
SND is recurring problem. I'd like to see drm-intel-nightly not breaking when pulling sound updates.
We need to escalate this again, snd team seriously sucks at quality control :( Adding Libin&Takashi. If this doesn't improve I need to throw sound trees out of -nightly for real.
Sorry about that, but I couldn't get the warning on my machine.
How is the procedure to reproduce the bug? Please give the exact commit id and environment you're testing, too.
Takashi
Re: ✗ Fi.CI.BAT: failure for drm/i915/bxt: Fix off-by-one error in Broxton PLL IDs (rev3)
Quoted 6 lines · On Wednesday 16 March 2016 16:40:24 Takashi Iwai wrote:
Quoted 5 lines · Daniel Vetter
Quoted 3 lines · Tomi Sarvela
SND is recurring problem. I'd like to see drm-intel-nightly not breaking when pulling sound updates.
Quoted 8 lines
Quoted 3 lines
We need to escalate this again, snd team seriously sucks at quality control :( Adding Libin&Takashi. If this doesn't improve I need to throw sound trees out of -nightly for real.
Sorry about that, but I couldn't get the warning on my machine.
How is the procedure to reproduce the bug? Please give the exact commit id and environment you're testing, too.
Our CI has been built to mimic user environment, so base is up-to-date Ubuntu 15.04. This affects to boot-up mechanics and usermode software versions. There are about dozen machines, 8 gens, from ILK to SKL.
Reproduction: CI is doing these steps
- Compile kernel: CI_DRM is drm-intel-nightly HEAD
- Deploy it to testhost: copy to /boot, recreate initrd
- Boot testhost to init 3
- Run newest IGT/piglit with basic testset
- Collect results
The last commits tested are:
CI_DRM_1140 git://anongit.freedesktop.org/drm-intel3e5ecc8c5ff80cb1fb635ce1cf16b7cd4cfb1979
CI_DRM_1141 git://anongit.freedesktop.org/drm-intelfc881ebd9c3c26919c7d1113f8bf7014e1a05563
CI_DRM_1142 git://anongit.freedesktop.org/drm-intel9f8709ffd099e85e5e116ed7d09f1b8009f40847
CI_DRM_1143 git://anongit.freedesktop.org/drm-intel5356c22379fc96cb087ee59bfdbbe46ec3bdf654
CI_DRM_1144 git://anongit.freedesktop.org/drm-intela5c43f5d1b4968a370f54bdda5387ce213aca785
CI_DRM_1145 git://anongit.freedesktop.org/drm-intelbf3dcd53821a7d6c81f7061c6c7956aad57ec615
CI_DRM_1146 git://anongit.freedesktop.org/drm-intelbe0d1481fb1a2fd1cb199b81c9c01154a78d43dd
CI_DRM_1147 git://anongit.freedesktop.org/drm-inteldbbc6d276864d7b7a3a1edb04f0511153f9c3852
Note that drm-intel-nightly history changes, so the exact commits might not be there any more.
Tomi
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: ✗ Fi.CI.BAT: failure for drm/i915/bxt: Fix off-by-one error in Broxton PLL IDs (rev3)
Quoted 49 lines · Tomi Sarvela
Quoted 6 lines · On Wednesday 16 March 2016 16:40:24 Takashi Iwai wrote:
Quoted 5 lines · Daniel Vetter
Quoted 3 lines · Tomi Sarvela
SND is recurring problem. I'd like to see drm-intel-nightly not breaking when pulling sound updates.
Quoted 8 lines
Quoted 3 lines
We need to escalate this again, snd team seriously sucks at quality control :( Adding Libin&Takashi. If this doesn't improve I need to throw sound trees out of -nightly for real.
Sorry about that, but I couldn't get the warning on my machine.
How is the procedure to reproduce the bug? Please give the exact commit id and environment you're testing, too.
Our CI has been built to mimic user environment, so base is up-to-date Ubuntu 15.04. This affects to boot-up mechanics and usermode software versions. There are about dozen machines, 8 gens, from ILK to SKL.
Reproduction: CI is doing these steps
- Compile kernel:
CI_DRMis drm-intel-nightly HEAD
- Deploy it to testhost: copy to /boot, recreate initrd
- Boot testhost to init 3
- Run newest IGT/piglit with basic testset
- Collect resultsThe last commits tested are:
CI_DRM_1140git://anongit.freedesktop.org/drm-intel3e5ecc8c5ff80cb1fb635ce1cf16b7cd4cfb1979
CI_DRM_1141git://anongit.freedesktop.org/drm-intelfc881ebd9c3c26919c7d1113f8bf7014e1a05563
CI_DRM_1142git://anongit.freedesktop.org/drm-intel9f8709ffd099e85e5e116ed7d09f1b8009f40847
CI_DRM_1143git://anongit.freedesktop.org/drm-intel5356c22379fc96cb087ee59bfdbbe46ec3bdf654
CI_DRM_1144git://anongit.freedesktop.org/drm-intela5c43f5d1b4968a370f54bdda5387ce213aca785
CI_DRM_1145git://anongit.freedesktop.org/drm-intelbf3dcd53821a7d6c81f7061c6c7956aad57ec615
Quoted 8 lines
CI_DRM_1146git://anongit.freedesktop.org/drm-intelbe0d1481fb1a2fd1cb199b81c9c01154a78d43dd
CI_DRM_1147git://anongit.freedesktop.org/drm-inteldbbc6d276864d7b7a3a1edb04f0511153f9c3852Note that drm-intel-nightly history changes, so the exact commits might not be there any more.
Well, I have no internal access, so I have no idea which one succeeded and which one failed.
Unfortunately I can't reproduce it in my side. A simpler unit test that can reliably reproduce the issue would be really appreciated...
thanks,
Takashi
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [Intel-gfx] ✗ Fi.CI.BAT: failure for drm/i915/bxt: Fix off-by-one error in Broxton PLL IDs (rev3)
On Thursday 17 March 2016 18:00:52 Takashi Iwai wrote:
...
Quoted 11 lines
Quoted 5 lines
CI_DRM_1147git://anongit.freedesktop.org/drm-inteldbbc6d276864d7b7a3a1edb04f0511153f9c3852Note that drm-intel-nightly history changes, so the exact commits might not be there any more.
Well, I have no internal access, so I have no idea which one succeeded and which one failed.
Unfortunately I can't reproduce it in my side. A simpler unit test that can reliably reproduce the issue would be really appreciated...
Sorry, I was being unclear. They all fail on selected machines (ILK, SNB), since CI_DRM_1140.
The unit tests that hang quite reliably on first run are igt@gem_ringfill_basic-default-s3 igt@drv_module_reload_basic igt@kms_pipe_crc_basic@suspend-read-crc-pipe-[abc]
Tomi
Re: ✗ Fi.CI.BAT: failure for drm/i915/bxt: Fix off-by-one error in Broxton PLL IDs (rev3)
Quoted 10 lines · Tomi Sarvela
On Thursday 17 March 2016 18:00:52 Takashi Iwai wrote:
...Quoted 6 lines
Quoted 5 lines
CI_DRM_1147git://anongit.freedesktop.org/drm-inteldbbc6d276864d7b7a3a1edb04f0511153f9c3852Note that drm-intel-nightly history changes, so the exact commits might not be there any more.
Quoted 8 lines
Quoted 5 lines
Well, I have no internal access, so I have no idea which one succeeded and which one failed.
Unfortunately I can't reproduce it in my side. A simpler unit test that can reliably reproduce the issue would be really appreciated...
Sorry, I was being unclear. They all fail on selected machines (ILK, SNB), since
CI_DRM_1140.
Do you have the commit of the last working kernel?
Quoted 4 lines
The unit tests that hang quite reliably on first run are igt@gem_ringfill_basic-default-s3 igt@drv_module_reload_basic igt@kms_pipe_crc_basic@suspend-read-crc-pipe-[abc]
Where can I get these?
Takashi
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: ✗ Fi.CI.BAT: failure for drm/i915/bxt: Fix off-by-one error in Broxton PLL IDs (rev3)
Quoted 10 lines · On Friday 18 March 2016 09:00:13 Takashi Iwai wrote:
On Fri, 18 Mar 2016 08:36:27 +0100,
Do you have the commit of the last working kernel?
Quoted 4 lines
The unit tests that hang quite reliably on first run are igt@gem_ringfill_basic-default-s3 igt@drv_module_reload_basic igt@kms_pipe_crc_basic@suspend-read-crc-pipe-[abc]
Where can I get these?
IGT is intel-gpu-tools, hardware unittests using piglit as a base. CI runs BAT (Basic Acceptance Tests), a set of IGT tests: around 200 tests, runs under 10 minutes. Can be run with ${IGT_PATH}/scripts/run-tests.sh -t basic
git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
http://anongit.freedesktop.org/git/piglit.git
Latest working drm-intel commit was CI_DRM_1139:3e5ecc8c5ff80cb1fb635ce1cf16b7cd4cfb1979 2016-03-14_09-06-45 drm-intel-nightly:
2016y-03m-14d-09h-06m-00s UTC integration manifest
Best Regards,
Tomi
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: ✗ Fi.CI.BAT: failure for drm/i915/bxt: Fix off-by-one error in Broxton PLL IDs (rev3)
Quoted 17 lines · Tomi Sarvela
Quoted 10 lines · On Friday 18 March 2016 09:00:13 Takashi Iwai wrote:
On Fri, 18 Mar 2016 08:36:27 +0100,
Do you have the commit of the last working kernel?
Quoted 4 lines
The unit tests that hang quite reliably on first run are igt@gem_ringfill_basic-default-s3 igt@drv_module_reload_basic igt@kms_pipe_crc_basic@suspend-read-crc-pipe-[abc]
Where can I get these?
IGT is intel-gpu-tools, hardware unittests using piglit as a base. CI runs BAT (Basic Acceptance Tests), a set of IGT tests: around 200 tests, runs under 10 minutes. Can be run with
${IGT_PATH}/scripts/run-tests.sh-t basic
Quoted 7 lines
git://anongit.freedesktop.org/xorg/app/intel-gpu-toolshttp://anongit.freedesktop.org/git/piglit.git
Latest working drm-intel commit was
CI_DRM_1139:3e5ecc8c5ff80cb1fb635ce1cf16b7cd4cfb19792016-03-14_09-06-45 drm-intel-nightly:
2016y-03m-14d-09h-06m-00s UTC integration manifest
There were a few different kernel warnings, so this date is possibly a red herring. One is the kernel warning from pin2port(), and this has nothing to do with Skylake. It's being addressed now.
The problem I can't follow is the PM refcount unbalance found on Skylake. It'd be helpful if you can give the exact *minimal* reproducer. The warning shows the result, and it means that something wrong did happen before that. So, we need the procedure until that point, not the point of the outcome.
thanks,
Takashi
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Jani Nikula
maintainerRe: ✗ Fi.CI.BAT: failure for drm/i915/bxt: Fix off-by-one error in Broxton PLL IDs (rev3)
In reply to Daniel VetterQuoted 19 lines · Daniel Vetter
[ text/plain ]
Quoted 17 lines · Tomi Sarvela
Quoted 15 lines · On Wednesday 16 March 2016 10:48:43 Imre Deak wrote:
Tomi, noticed two things that maybe infrastructure related, see below:
Quoted 10 lines
Test
drv_module_reload_basic:skip -> PASS (bdw-nuci7) Test gem_ringfill: Subgroup basic-default-s3: pass -> DMESG-WARN (skl-nuci5) Test gem_storedw_loop: Subgroup basic-bsd: pass -> DMESG-WARN (skl-nuci5) Subgroup basic-bsd1: pass -> DMESG-WARN (skl-nuci5)Unrelated platform. All of the above are SND resume failures. Ville said he contacted Takashi about them.
Quoted 6 lines
Quoted 2 lines
SND is recurring problem. I'd like to see drm-intel-nightly not breaking when pulling sound updates.
We need to escalate this again, snd team seriously sucks at quality control :( Adding Libin&Takashi. If this doesn't improve I need to throw sound trees out of -nightly for real.
With that, we'd get more stable CI, but we'd also only see the failures once the sound trees get merged upstream. We don't want that either.
One idea would be to have separate CI runs for updating trees not in our control. But we're pretty far from making that happen.
BR,
Jani.
Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: ✗ Fi.CI.BAT: failure for drm/i915/bxt: Fix off-by-one error in Broxton PLL IDs (rev3)
Quoted 27 lines · Jani Nikula
Quoted 19 lines · Daniel Vetter
[ text/plain ]
Quoted 17 lines · Tomi Sarvela
Quoted 15 lines · On Wednesday 16 March 2016 10:48:43 Imre Deak wrote:
Tomi, noticed two things that maybe infrastructure related, see below:
Quoted 10 lines
Test
drv_module_reload_basic:skip -> PASS (bdw-nuci7) Test gem_ringfill: Subgroup basic-default-s3: pass -> DMESG-WARN (skl-nuci5) Test gem_storedw_loop: Subgroup basic-bsd: pass -> DMESG-WARN (skl-nuci5) Subgroup basic-bsd1: pass -> DMESG-WARN (skl-nuci5)Unrelated platform. All of the above are SND resume failures. Ville said he contacted Takashi about them.
Quoted 6 lines
Quoted 2 lines
SND is recurring problem. I'd like to see drm-intel-nightly not breaking when pulling sound updates.
We need to escalate this again, snd team seriously sucks at quality control :( Adding Libin&Takashi. If this doesn't improve I need to throw sound trees out of -nightly for real.
Quoted 5 lines
With that, we'd get more stable CI, but we'd also only see the failures once the sound trees get merged upstream. We don't want that either.
One idea would be to have separate CI runs for updating trees not in our control. But we're pretty far from making that happen.
Yes agreed, it would probably not help a lot at all to drop sound trees, we'd simply notice a bit later. I'm not sure what would be the best option here, just expressing maintainer grumpiness ;-) Good ideas very much welcome ...
-Daniel
Signature · 7 lines
Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: ✗ Fi.CI.BAT: failure for drm/i915/bxt: Fix off-by-one error in Broxton PLL IDs (rev3)
In reply to Imre DeakQuoted 65 lines · Imre Deak
Tomi, noticed two things that maybe infrastructure related, see below:
Quoted 14 lines · Patchwork
== Series Details ==
Series: drm/i915/bxt: Fix off-by-one error in Broxton PLL IDs (rev3)
URL : https://patchwork.freedesktop.org/series/4444/
State : failure== Summary ==
Series 4444v3 drm/i915/bxt: Fix off-by-one error in Broxton PLL IDs
http://patchwork.freedesktop.org/api/1.0/series/4444/revisions/3/mb
ox
/Quoted 10 lines
Test
drv_module_reload_basic:
skip -> PASS (bdw-nuci7) Testgem_ringfill:
Subgroup basic-default-s3:
pass -> DMESG-WARN (skl-nuci5) Testgem_storedw_loop:
Subgroup basic-bsd:
pass -> DMESG-WARN (skl-nuci5) Subgroup basic-bsd1:
pass -> DMESG-WARN (skl-nuci5)Unrelated platform. All of the above are SND resume failures. Ville said he contacted Takashi about them.
Quoted 4 lines
Test
kms_flip:
Subgroup basic-flip-vs-wf_vblank:
dmesg-warn -> PASS (hsw-brixbox) pass -> DMESG-WARN (bdw-ultra)Unrelated platform.
Tomi, there are ACPI erros in the log, maybe needs a BIOS upgrade? It's
also affected by
https://bugs.freedesktop.org/show_bug.cgi?id=94349Quoted 2 lines
Subgroup basic-plain-flip:
pass -> DMESG-WARN (hsw-gt2)Unrelated platform:
https://patchwork.freedesktop.org/patch/75903/Quoted 7 lines
Test
kms_pipe_crc_basic:
Subgroup read-crc-pipe-c:
fail -> PASS (hsw-brixbox) Subgroup suspend-read-crc-pipe-b:
dmesg-warn -> PASS (skl-nuci5) Subgroup suspend-read-crc-pipe-c:
pass -> INCOMPLETE (skl-nuci5)Unrelated platform, I opened a new bug:
https://bugs.freedesktop.org/show_bug.cgi?id=94566Quoted 3 lines
Test
pm_rpm:
Subgroup basic-pci-d3-state:
pass -> DMESG-WARN (snb-dellxps)
Quoted 8 lines
Unrelated platform:
https://patchwork.freedesktop.org/patch/75903/Quoted 2 lines
Subgroup basic-rte:
pass -> DMESG-WARN (bsw-nuc-2)Unrelated platform:
https://bugs.freedesktop.org/show_bug.cgi?id=94164
Pushed the patch to -dinq, thanks for the review.
--Imre
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx