Skip to contentSkip to conversation

drm/msm/dsi: Fix regulator API abuse

PATCH In review Mark Brown 2 participants 7 messages Mar 30, 2016 – Apr 29, 2016

Subsystems (3)
lore
Share & tools
lore

Mark Brown

author
#0 lore raw

PATCH 1/1 drm/msm/dsi: Fix regulator API abuse

The voltage changing code in this driver is broken and should be removed. The driver sets a single, exact voltage on probe. Unless there is a very good reason for this (which should be documented in comments) constraints like this need to be set via the machine constraints, voltage setting in a driver is expected to be used in cases where the voltage varies at runtime.

In addition client drivers should almost never be calling regulator_can_set_voltage(), if the device needs to set a voltage it needs to set the voltage and the regulator core will handle the case where the regulator is fixed voltage. If the driver simply skips setting the voltage if it doesn't have permission then it shouild just not bother in the first place.

---
 drivers/gpu/drm/msm/dsi/dsi_host.c | 12 ------------
 1 file changed, 12 deletions(-)
drivers/gpu/drm/msm/dsi/dsi_host.c +0 -12
index 4282ec6bbaaf..a3e47ad83eb3 100644
@@ -325,18 +325,6 @@ static int dsi_regulator_init(struct msm_dsi_host *msm_host)
 		return ret;
 	}
 
-	for (i = 0; i < num; i++) {
-		if (regulator_can_change_voltage(s[i].consumer)) {
-			ret = regulator_set_voltage(s[i].consumer,
-				regs[i].min_voltage, regs[i].max_voltage);
-			if (ret < 0) {
-				pr_err("regulator %d set voltage failed, %d\n",
-					i, ret);
-				return ret;
-			}
-		}
-	}
-
 	return 0;
 }
 
Signature · 6 lines
2.8.0.rc3

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
#1 lore raw

Hi,

Quoted 7 lines · Mark Brown

The voltage changing code in this driver is broken and should be removed. The driver sets a single, exact voltage on probe. Unless there is a very good reason for this (which should be documented in comments) constraints like this need to be set via the machine constraints, voltage setting in a driver is expected to be used in cases where the voltage varies at runtime.

Quoted 5 lines

In addition client drivers should almost never be calling regulator_can_set_voltage(), if the device needs to set a voltage it needs to set the voltage and the regulator core will handle the case where the regulator is fixed voltage. If the driver simply skips setting the voltage if it doesn't have permission then it shouild just

s/shouild/should

Could you also pull in the diff I've added below? It removes another set_voltage call from the hdmi driver and the struct members used to manage the voltage range.

Quoted 2 lines

not bother in the first place.

+John, you'll need to update your regulator nodes with the min/max voltage values in your N7 dtsi whenever you plan to rebase next.

Thanks,
Archit

Quoted 19 lines
---
  drivers/gpu/drm/msm/dsi/dsi_host.c | 12 ------------
  1 file changed, 12 deletions(-)
drivers/gpu/drm/msm/dsi/dsi_host.c +0 -5
index 4282ec6bbaaf..a3e47ad83eb3 100644
@@ -325,18 +325,6 @@ static int dsi_regulator_init(struct msm_dsi_host *msm_host)
  		return ret;
  	}
 
-	for (i = 0; i < num; i++) {
-		if (regulator_can_change_voltage(s[i].consumer)) {
-			ret = regulator_set_voltage(s[i].consumer,
-				regs[i].min_voltage, regs[i].max_voltage);
-			if (ret < 0) {

drivers/gpu/drm/msm/dsi/dsi_host.c static int dsi_regulator_init(struct msm_dsi_host *msm_host) · line 330

Quoted 10 lines
drivers/gpu/drm/msm/dsi/dsi_host.c +0 -7
-				pr_err("regulator %d set voltage failed, %d\n",
-					i, ret);
-				return ret;
-			}
-		}
-	}
-
  	return 0;
  }
 

---8<---

drivers/gpu/drm/msm/dsi/dsi.h +0 -2
index 749fbb2..03f115f 100644
@@ -41,8 +41,6 @@ enum msm_dsi_phy_type {
 /* Regulators for DSI devices */
 struct dsi_reg_entry {
 	char name[32];
-	int min_voltage;
-	int max_voltage;
 	int enable_load;
 	int disable_load;
 };
drivers/gpu/drm/msm/dsi/dsi_cfg.c +17 -17
index e58e9b9..cc802bb 100644
@@ -22,9 +22,9 @@ static const struct msm_dsi_config apq8064_dsi_cfg = {
 	.reg_cfg = {
 		.num = 3,
 		.regs = {
-			{"vdda", 1200000, 1200000, 100000, 100},
-			{"avdd", 3000000, 3000000, 110000, 100},
-			{"vddio", 1800000, 1800000, 100000, 100},
+			{"vdda", 100000, 100},
+			{"avdd", 10000, 100},
+			{"vddio", 100000, 100},
 		},
 	},
 	.bus_clk_names = dsi_v2_bus_clk_names,
@@ -40,10 +40,10 @@ static const struct msm_dsi_config msm8974_apq8084_dsi_cfg = {
 	.reg_cfg = {
 		.num = 4,
 		.regs = {
-			{"gdsc", -1, -1, -1, -1},
-			{"vdd", 3000000, 3000000, 150000, 100},
-			{"vdda", 1200000, 1200000, 100000, 100},
-			{"vddio", 1800000, 1800000, 100000, 100},
+			{"gdsc", -1, -1},
+			{"vdd", 150000, 100},
+			{"vdda", 100000, 100},
+			{"vddio", 100000, 100},
 		},
 	},
 	.bus_clk_names = dsi_6g_bus_clk_names,
@@ -59,9 +59,9 @@ static const struct msm_dsi_config msm8916_dsi_cfg = {
 	.reg_cfg = {
 		.num = 3,
 		.regs = {
-			{"gdsc", -1, -1, -1, -1},
-			{"vdda", 1200000, 1200000, 100000, 100},
-			{"vddio", 1800000, 1800000, 100000, 100},
+			{"gdsc", -1, -1},
+			{"vdda", 100000, 100},
+			{"vddio", 100000, 100},
 		},
 	},
 	.bus_clk_names = dsi_8916_bus_clk_names,
@@ -73,13 +73,13 @@ static const struct msm_dsi_config msm8994_dsi_cfg = {
 	.reg_cfg = {
 		.num = 7,
 		.regs = {
-			{"gdsc", -1, -1, -1, -1},
-			{"vdda", 1250000, 1250000, 100000, 100},
-			{"vddio", 1800000, 1800000, 100000, 100},
-			{"vcca", 1000000, 1000000, 10000, 100},
-			{"vdd", 1800000, 1800000, 100000, 100},
-			{"lab_reg", -1, -1, -1, -1},
-			{"ibb_reg", -1, -1, -1, -1},
+			{"gdsc", -1, -1},
+			{"vdda", 100000, 100},
+			{"vddio", 100000, 100},
+			{"vcca", 10000, 100},
+			{"vdd", 100000, 100},
+			{"lab_reg", -1, -1},
+			{"ibb_reg", -1, -1},
 		},
 	},
 	.bus_clk_names = dsi_6g_bus_clk_names,
drivers/gpu/drm/msm/dsi/phy/dsi_phy.c +0 -13
index 91a95fb..e2f42d8 100644
@@ -177,19 +177,6 @@ static int dsi_phy_regulator_init(struct msm_dsi_phy *phy)
 		return ret;
 	}
 
-	for (i = 0; i < num; i++) {
-		if (regulator_can_change_voltage(s[i].consumer)) {
-			ret = regulator_set_voltage(s[i].consumer,
-				regs[i].min_voltage, regs[i].max_voltage);
-			if (ret < 0) {
-				dev_err(dev,
-					"regulator %d set voltage failed, %d\n",
-					i, ret);
-				return ret;
-			}
-		}
-	}
-
 	return 0;
 }
 
drivers/gpu/drm/msm/dsi/phy/dsi_phy_20nm.c +2 -2
index 2e9ba11..3c93cfc 100644
@@ -138,8 +138,8 @@ const struct msm_dsi_phy_cfg dsi_phy_20nm_cfgs = {
 	.reg_cfg = {
 		.num = 2,
 		.regs = {
-			{"vddio", 1800000, 1800000, 100000, 100},
-			{"vcca", 1000000, 1000000, 10000, 100},
+			{"vddio", 100000, 100},
+			{"vcca", 10000, 100},
 		},
 	},
 	.ops = {
drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c +2 -2
index edf7411..397f09a 100644
@@ -138,7 +138,7 @@ const struct msm_dsi_phy_cfg dsi_phy_28nm_hpm_cfgs = {
 	.reg_cfg = {
 		.num = 1,
 		.regs = {
-			{"vddio", 1800000, 1800000, 100000, 100},
+			{"vddio", 100000, 100},
 		},
 	},
 	.ops = {
@@ -153,7 +153,7 @@ const struct msm_dsi_phy_cfg dsi_phy_28nm_lp_cfgs = {
 	.reg_cfg = {
 		.num = 1,
 		.regs = {
-			{"vddio", 1800000, 1800000, 100000, 100},
+			{"vddio", 100000, 100},
 		},
 	},
 	.ops = {
drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c +1 -1
index 197b039..4ed7b57 100644
@@ -185,7 +185,7 @@ const struct msm_dsi_phy_cfg dsi_phy_28nm_8960_cfgs = {
 	.reg_cfg = {
 		.num = 1,
 		.regs = {
-			{"vddio", 1800000, 1800000, 100000, 100},
+			{"vddio", 100000, 100},
 		},
 	},
 	.ops = {

--->8---

Signature · 5 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, hosted by The Linux Foundation
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author
#2 lore raw
Quoted 3 lines · Archit Taneja

Could you also pull in the diff I've added below? It removes another set_voltage call from the hdmi driver and the struct members used to manage the voltage range.

Please update and submit this directly, I'm not adding anything by sending it on.

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel

#3 lore raw

cover drm/msm: Remove regulator_set_voltage calls

In reply to Mark Brown

The MSM KMS driver calls regulator_set_voltage to set a fixed voltage in a few places. This isn't correct API usage as explained in the commit message of Mark Brown's original patch:

http://www.spinics.net/lists/dri-devel/msg103714.html

This patchset drops all the regultor_set_voltage calls. The first patch adds some more clean up code to Mark's original patch.

Archit Taneja (3):
drm/msm/dsi: Fix regulator API abuse
drm/msm/edp: Drop regulator_set_voltage call drm/msm/mdp4: Don't manage DSI PLL regulators in MDP driver

 drivers/gpu/drm/msm/dsi/dsi.h                   |  2 --
 drivers/gpu/drm/msm/dsi/dsi_cfg.c               | 34 ++++++++++++-------------
 drivers/gpu/drm/msm/dsi/dsi_host.c              | 12 ---------
 drivers/gpu/drm/msm/dsi/phy/dsi_phy.c           | 13 ----------
 drivers/gpu/drm/msm/dsi/phy/dsi_phy_20nm.c      |  4 +--
 drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c      |  4 +--
 drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c |  2 +-
 drivers/gpu/drm/msm/edp/edp_ctrl.c              | 10 +-------
 drivers/gpu/drm/msm/mdp/mdp4/mdp4_kms.c         | 34 -------------------------
 drivers/gpu/drm/msm/mdp/mdp4/mdp4_kms.h         |  2 --
 10 files changed, 23 insertions(+), 94 deletions(-)
Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
#4 lore raw

PATCH 1/3 drm/msm/dsi: Fix regulator API abuse

The voltage changing code in this driver is broken and should be removed. The driver sets a single, exact voltage on probe. Unless there is a very good reason for this (which should be documented in comments) constraints like this need to be set via the machine constraints, voltage setting in a driver is expected to be used in cases where the voltage varies at runtime.

In addition client drivers should almost never be calling regulator_can_set_voltage(), if the device needs to set a voltage it needs to set the voltage and the regulator core will handle the case where the regulator is fixed voltage. If the driver simply skips setting the voltage if it doesn't have permission then it should just not bother in the first place.

Originally authored by Mark Brown <[email protected]>

Remove the min/max voltage data entries per SoC managed by the driver. These aren't needed as we don't try to set voltages any more. Mention in comments the voltages that each regulator expects.

---
 drivers/gpu/drm/msm/dsi/dsi.h                   |  2 --
 drivers/gpu/drm/msm/dsi/dsi_cfg.c               | 34 ++++++++++++-------------
 drivers/gpu/drm/msm/dsi/dsi_host.c              | 12 ---------
 drivers/gpu/drm/msm/dsi/phy/dsi_phy.c           | 13 ----------
 drivers/gpu/drm/msm/dsi/phy/dsi_phy_20nm.c      |  4 +--
 drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c      |  4 +--
 drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c |  2 +-
 7 files changed, 22 insertions(+), 49 deletions(-)
drivers/gpu/drm/msm/dsi/dsi.h +0 -2
index 749fbb2..03f115f 100644
@@ -41,8 +41,6 @@ enum msm_dsi_phy_type {
 /* Regulators for DSI devices */
 struct dsi_reg_entry {
 	char name[32];
-	int min_voltage;
-	int max_voltage;
 	int enable_load;
 	int disable_load;
 };
drivers/gpu/drm/msm/dsi/dsi_cfg.c +17 -17
index e58e9b9..93c1ee0 100644
@@ -22,9 +22,9 @@ static const struct msm_dsi_config apq8064_dsi_cfg = {
 	.reg_cfg = {
 		.num = 3,
 		.regs = {
-			{"vdda", 1200000, 1200000, 100000, 100},
-			{"avdd", 3000000, 3000000, 110000, 100},
-			{"vddio", 1800000, 1800000, 100000, 100},
+			{"vdda", 100000, 100},	/* 1.2 V */
+			{"avdd", 10000, 100},	/* 3.0 V */
+			{"vddio", 100000, 100},	/* 1.8 V */
 		},
 	},
 	.bus_clk_names = dsi_v2_bus_clk_names,
@@ -40,10 +40,10 @@ static const struct msm_dsi_config msm8974_apq8084_dsi_cfg = {
 	.reg_cfg = {
 		.num = 4,
 		.regs = {
-			{"gdsc", -1, -1, -1, -1},
-			{"vdd", 3000000, 3000000, 150000, 100},
-			{"vdda", 1200000, 1200000, 100000, 100},
-			{"vddio", 1800000, 1800000, 100000, 100},
+			{"gdsc", -1, -1},
+			{"vdd", 150000, 100},	/* 3.0 V */
+			{"vdda", 100000, 100},	/* 1.2 V */
+			{"vddio", 100000, 100},	/* 1.8 V */
 		},
 	},
 	.bus_clk_names = dsi_6g_bus_clk_names,
@@ -59,9 +59,9 @@ static const struct msm_dsi_config msm8916_dsi_cfg = {
 	.reg_cfg = {
 		.num = 3,
 		.regs = {
-			{"gdsc", -1, -1, -1, -1},
-			{"vdda", 1200000, 1200000, 100000, 100},
-			{"vddio", 1800000, 1800000, 100000, 100},
+			{"gdsc", -1, -1},
+			{"vdda", 100000, 100},	/* 1.2 V */
+			{"vddio", 100000, 100},	/* 1.8 V */
 		},
 	},
 	.bus_clk_names = dsi_8916_bus_clk_names,
@@ -73,13 +73,13 @@ static const struct msm_dsi_config msm8994_dsi_cfg = {
 	.reg_cfg = {
 		.num = 7,
 		.regs = {
-			{"gdsc", -1, -1, -1, -1},
-			{"vdda", 1250000, 1250000, 100000, 100},
-			{"vddio", 1800000, 1800000, 100000, 100},
-			{"vcca", 1000000, 1000000, 10000, 100},
-			{"vdd", 1800000, 1800000, 100000, 100},
-			{"lab_reg", -1, -1, -1, -1},
-			{"ibb_reg", -1, -1, -1, -1},
+			{"gdsc", -1, -1},
+			{"vdda", 100000, 100},	/* 1.25 V */
+			{"vddio", 100000, 100},	/* 1.8 V */
+			{"vcca", 10000, 100},	/* 1.0 V */
+			{"vdd", 100000, 100},	/* 1.8 V */
+			{"lab_reg", -1, -1},
+			{"ibb_reg", -1, -1},
 		},
 	},
 	.bus_clk_names = dsi_6g_bus_clk_names,
drivers/gpu/drm/msm/dsi/dsi_host.c +0 -12
index 4282ec6..a3e47ad8 100644
@@ -325,18 +325,6 @@ static int dsi_regulator_init(struct msm_dsi_host *msm_host)
 		return ret;
 	}
 
-	for (i = 0; i < num; i++) {
-		if (regulator_can_change_voltage(s[i].consumer)) {
-			ret = regulator_set_voltage(s[i].consumer,
-				regs[i].min_voltage, regs[i].max_voltage);
-			if (ret < 0) {
-				pr_err("regulator %d set voltage failed, %d\n",
-					i, ret);
-				return ret;
-			}
-		}
-	}
-
 	return 0;
 }
 
drivers/gpu/drm/msm/dsi/phy/dsi_phy.c +0 -13
index 91a95fb..e2f42d8 100644
@@ -177,19 +177,6 @@ static int dsi_phy_regulator_init(struct msm_dsi_phy *phy)
 		return ret;
 	}
 
-	for (i = 0; i < num; i++) {
-		if (regulator_can_change_voltage(s[i].consumer)) {
-			ret = regulator_set_voltage(s[i].consumer,
-				regs[i].min_voltage, regs[i].max_voltage);
-			if (ret < 0) {
-				dev_err(dev,
-					"regulator %d set voltage failed, %d\n",
-					i, ret);
-				return ret;
-			}
-		}
-	}
-
 	return 0;
 }
 
drivers/gpu/drm/msm/dsi/phy/dsi_phy_20nm.c +2 -2
index 2e9ba11..f4bc11a 100644
@@ -138,8 +138,8 @@ const struct msm_dsi_phy_cfg dsi_phy_20nm_cfgs = {
 	.reg_cfg = {
 		.num = 2,
 		.regs = {
-			{"vddio", 1800000, 1800000, 100000, 100},
-			{"vcca", 1000000, 1000000, 10000, 100},
+			{"vddio", 100000, 100},	/* 1.8 V */
+			{"vcca", 10000, 100},	/* 1.0 V */
 		},
 	},
 	.ops = {
drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c +2 -2
index edf7411..96d1852 100644
@@ -138,7 +138,7 @@ const struct msm_dsi_phy_cfg dsi_phy_28nm_hpm_cfgs = {
 	.reg_cfg = {
 		.num = 1,
 		.regs = {
-			{"vddio", 1800000, 1800000, 100000, 100},
+			{"vddio", 100000, 100},
 		},
 	},
 	.ops = {
@@ -153,7 +153,7 @@ const struct msm_dsi_phy_cfg dsi_phy_28nm_lp_cfgs = {
 	.reg_cfg = {
 		.num = 1,
 		.regs = {
-			{"vddio", 1800000, 1800000, 100000, 100},
+			{"vddio", 100000, 100},	/* 1.8 V */
 		},
 	},
 	.ops = {
drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c +1 -1
index 197b039..213355a 100644
@@ -185,7 +185,7 @@ const struct msm_dsi_phy_cfg dsi_phy_28nm_8960_cfgs = {
 	.reg_cfg = {
 		.num = 1,
 		.regs = {
-			{"vddio", 1800000, 1800000, 100000, 100},
+			{"vddio", 100000, 100},	/* 1.8 V */
 		},
 	},
 	.ops = {
Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
#5 lore raw

PATCH 2/3 drm/msm/edp: Drop regulator_set_voltage call

In reply to Archit Taneja

The eDP driver tries to set a fixed voltage for one of its regulators(vdda) before enabling it. This shouldn't be done by the driver, the voltage constraints should be specified on the regulator via DT and managed by the regulator core. A driver should call regulator_set_voltage only if it needs to change the voltage during runtime. Drop the regulator_set_voltage call. Mention in a comment the voltage that the regulator expects.

---
 drivers/gpu/drm/msm/edp/edp_ctrl.c | 10 +---------
 1 file changed, 1 insertion(+), 9 deletions(-)
drivers/gpu/drm/msm/edp/edp_ctrl.c +1 -9
index 81200e9..b0c02ee 100644
@@ -21,8 +21,6 @@
 #include "edp.h"
 #include "edp.xml.h"
 
-#define VDDA_MIN_UV		1800000	/* uV units */
-#define VDDA_MAX_UV		1800000	/* uV units */
 #define VDDA_UA_ON_LOAD		100000	/* uA units */
 #define VDDA_UA_OFF_LOAD	100	/* uA units */
 
@@ -67,7 +65,7 @@ struct edp_ctrl {
 	void __iomem *base;
 
 	/* regulators */
-	struct regulator *vdda_vreg;
+	struct regulator *vdda_vreg;	/* 1.8 V */
 	struct regulator *lvl_vreg;
 
 	/* clocks */
@@ -326,12 +324,6 @@ static int edp_regulator_enable(struct edp_ctrl *ctrl)
 {
 	int ret;
 
-	ret = regulator_set_voltage(ctrl->vdda_vreg, VDDA_MIN_UV, VDDA_MAX_UV);
-	if (ret) {
-		pr_err("%s:vdda_vreg set_voltage failed, %d\n", __func__, ret);
-		goto vdda_set_fail;
-	}
-
 	ret = regulator_set_load(ctrl->vdda_vreg, VDDA_UA_ON_LOAD);
 	if (ret < 0) {
 		pr_err("%s: vdda_vreg set regulator mode failed.\n", __func__);
Signature · 7 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
#6 lore raw

PATCH 3/3 drm/msm/mdp4: Don't manage DSI PLL regulators in MDP driver

In reply to Archit Taneja

The MDP4 driver tries to request and set voltages for regulators required by the DSI PLLs.

Firstly, the MDP4 driver shouldn't manage the DSI regulators, this should be handled in the DSI driver. Secondly, it shouldn't try to set a fixed voltage for regulators. Voltage constraints should be specified on the regulator via DT and managed by the regulator core.

Remove all the DSI PLL regulator related code from the MDP4 driver. It's managed in the DSI driver for MSM8960/APQ8064 already.

---
 drivers/gpu/drm/msm/mdp/mdp4/mdp4_kms.c | 34 ---------------------------------
 drivers/gpu/drm/msm/mdp/mdp4/mdp4_kms.h |  2 --
 2 files changed, 36 deletions(-)
drivers/gpu/drm/msm/mdp/mdp4/mdp4_kms.c +0 -34
index 76e1dfb..67442d5 100644
@@ -50,30 +50,6 @@ static int mdp4_hw_init(struct msm_kms *kms)
 
 	mdp4_kms->rev = minor;
 
-	if (mdp4_kms->dsi_pll_vdda) {
-		if ((mdp4_kms->rev == 2) || (mdp4_kms->rev == 4)) {
-			ret = regulator_set_voltage(mdp4_kms->dsi_pll_vdda,
-					1200000, 1200000);
-			if (ret) {
-				dev_err(dev->dev,
-					"failed to set dsi_pll_vdda voltage: %d\n", ret);
-				goto out;
-			}
-		}
-	}
-
-	if (mdp4_kms->dsi_pll_vddio) {
-		if (mdp4_kms->rev == 2) {
-			ret = regulator_set_voltage(mdp4_kms->dsi_pll_vddio,
-					1800000, 1800000);
-			if (ret) {
-				dev_err(dev->dev,
-					"failed to set dsi_pll_vddio voltage: %d\n", ret);
-				goto out;
-			}
-		}
-	}
-
 	if (mdp4_kms->rev > 1) {
 		mdp4_write(mdp4_kms, REG_MDP4_CS_CONTROLLER0, 0x0707ffff);
 		mdp4_write(mdp4_kms, REG_MDP4_CS_CONTROLLER1, 0x03073f3f);
@@ -485,16 +461,6 @@ struct msm_kms *mdp4_kms_init(struct drm_device *dev)
 		goto fail;
 	}
 
-	mdp4_kms->dsi_pll_vdda =
-			devm_regulator_get_optional(&pdev->dev, "dsi_pll_vdda");
-	if (IS_ERR(mdp4_kms->dsi_pll_vdda))
-		mdp4_kms->dsi_pll_vdda = NULL;
-
-	mdp4_kms->dsi_pll_vddio =
-			devm_regulator_get_optional(&pdev->dev, "dsi_pll_vddio");
-	if (IS_ERR(mdp4_kms->dsi_pll_vddio))
-		mdp4_kms->dsi_pll_vddio = NULL;
-
 	/* NOTE: driver for this regulator still missing upstream.. use
 	 * _get_exclusive() and ignore the error if it does not exist
 	 * (and hope that the bootloader left it on for us)
drivers/gpu/drm/msm/mdp/mdp4/mdp4_kms.h +0 -2
index b282871..c5d045d 100644
@@ -37,8 +37,6 @@ struct mdp4_kms {
 
 	void __iomem *mmio;
 
-	struct regulator *dsi_pll_vdda;
-	struct regulator *dsi_pll_vddio;
 	struct regulator *vdd;
 
 	struct clk *clk;
Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation