Skip to contentSkip to conversation

Patch "Bluetooth: btusb: Add a new AR3012 ID 13d3:3472" has been added to the 4.5-stable tree

PATCH [email protected] 1 participant 1 message Apr 9, 2016

Subsystems (2)
lore
Share & tools
lore

[email protected]

author maintainer Applied
#0 lore raw

This is a note to let you know that I've just added the patch titled

    Bluetooth: btusb: Add a new AR3012 ID 13d3:3472

to the 4.5-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:

     bluetooth-btusb-add-a-new-ar3012-id-13d3-3472.patch

and it can be found in the queue-4.5 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

Quoted 1 line

From 75c6aca4765dbe3d0c1507ab5052f2e373dc2331 Mon Sep 17 00:00:00 2001

From: Dmitry Tunin <[email protected]>
Date: Fri, 4 Mar 2016 01:32:19 +0300
Subject: Bluetooth: btusb: Add a new AR3012 ID 13d3:3472

From: Dmitry Tunin <[email protected]>

commit 75c6aca4765dbe3d0c1507ab5052f2e373dc2331 upstream.

T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=13d3 ProdID=3472 Rev=00.01
C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

---
 drivers/bluetooth/ath3k.c |    2 ++
 drivers/bluetooth/btusb.c |    1 +
 2 files changed, 3 insertions(+)
drivers/bluetooth/ath3k.c +2 -0
@@ -119,6 +119,7 @@ static const struct usb_device_id ath3k_
 	{ USB_DEVICE(0x13d3, 0x3408) },
 	{ USB_DEVICE(0x13d3, 0x3423) },
 	{ USB_DEVICE(0x13d3, 0x3432) },
+	{ USB_DEVICE(0x13d3, 0x3472) },
 	{ USB_DEVICE(0x13d3, 0x3474) },
 
 	/* Atheros AR5BBU12 with sflash firmware */
@@ -183,6 +184,7 @@ static const struct usb_device_id ath3k_
 	{ USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3423), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x13d3, 0x3472), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3474), .driver_info = BTUSB_ATH3012 },
 
 	/* Atheros AR5BBU22 with sflash firmware */
drivers/bluetooth/btusb.c +1 -0
@@ -233,6 +233,7 @@ static const struct usb_device_id blackl
 	{ USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3423), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x13d3, 0x3472), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3474), .driver_info = BTUSB_ATH3012 },
 
 	/* Atheros AR5BBU12 with sflash firmware */

Patches currently in stable-queue which might be from [email protected] are

queue-4.5/bluetooth-btusb-add-new-ar3012-id-13d3-3395.patch queue-4.5/bluetooth-btusb-add-a-new-ar3012-id-13d3-3472.patch queue-4.5/bluetooth-btusb-add-a-new-ar3012-id-04ca-3014.patch