: conf: topology: Add the conf for SKL-rt286
v4 cover : conf: topology: Add the conf for SKL-rt286
This series adds SKL-i2c conf for simple PCM topology graph
Changes in v4:
- add back the pre-compiled binary blobs
- remove running the binary on intsall step
Changes in v3:
- remove bin blobs, now they are generated in install step
- hook the tool compilation to alsa-lib and run it on install
- add u8 in alsa type_compat.h
Shreyas NC (3):
conf: topology: Add Skylake i2s conf
Add u8 in type_compat.h
conf: topology: Generate Private data binary blobs
configure.ac | 2 + include/sound/type_compat.h | 2 + src/conf/topology/Makefile.am | 2 +- src/conf/topology/sklrt286/Makefile.am | 5 + src/conf/topology/sklrt286/codec0_in-cpr-1.bin | Bin 0 -> 4244 bytes src/conf/topology/sklrt286/codec0_in-mi.bin | Bin 0 -> 4244 bytes src/conf/topology/sklrt286/codec0_out-cpr-4.bin | Bin 0 -> 4244 bytes src/conf/topology/sklrt286/codec0_out-mo.bin | Bin 0 -> 4244 bytes src/conf/topology/sklrt286/codec1_out-cpr-5.bin | Bin 0 -> 4244 bytes src/conf/topology/sklrt286/codec1_out-mo.bin | Bin 0 -> 4244 bytes src/conf/topology/sklrt286/data/Makefile.am | 4 + src/conf/topology/sklrt286/data/pvt.c | 1815 ++++++++++++++++++++ src/conf/topology/sklrt286/data/pvt_data.c | 90 + src/conf/topology/sklrt286/data/pvt_local.h | 9 + .../topology/sklrt286/data/skl-tplg-interface.h | 232 +++ .../topology/sklrt286/dmic01_hifi_in-cpr-3.bin | Bin 0 -> 4244 bytes src/conf/topology/sklrt286/dmic01_hifi_in-mi.bin | Bin 0 -> 4244 bytes src/conf/topology/sklrt286/hdmi1_pt_out-cpr-7.bin | Bin 0 -> 4244 bytes src/conf/topology/sklrt286/hdmi1_pt_out-cpr-8.bin | Bin 0 -> 4244 bytes src/conf/topology/sklrt286/hdmi2_pt_out-cpr-10.bin | Bin 0 -> 4244 bytes src/conf/topology/sklrt286/hdmi2_pt_out-cpr-9.bin | Bin 0 -> 4244 bytes src/conf/topology/sklrt286/hdmi3_pt_out-cpr-11.bin | Bin 0 -> 4244 bytes src/conf/topology/sklrt286/hdmi3_pt_out-cpr-12.bin | Bin 0 -> 4244 bytes src/conf/topology/sklrt286/media0_in-cpr-0.bin | Bin 0 -> 4244 bytes src/conf/topology/sklrt286/media0_in-mi.bin | Bin 0 -> 4244 bytes src/conf/topology/sklrt286/media0_out-cpr-6.bin | Bin 0 -> 4244 bytes src/conf/topology/sklrt286/media0_out-mo.bin | Bin 0 -> 4244 bytes src/conf/topology/sklrt286/skl_i2s.conf | 342 ++++ 28 files changed, 2502 insertions(+), 1 deletion(-) create mode 100644 src/conf/topology/sklrt286/Makefile.am create mode 100644 src/conf/topology/sklrt286/codec0_in-cpr-1.bin create mode 100644 src/conf/topology/sklrt286/codec0_in-mi.bin create mode 100644 src/conf/topology/sklrt286/codec0_out-cpr-4.bin create mode 100644 src/conf/topology/sklrt286/codec0_out-mo.bin create mode 100644 src/conf/topology/sklrt286/codec1_out-cpr-5.bin create mode 100644 src/conf/topology/sklrt286/codec1_out-mo.bin create mode 100644 src/conf/topology/sklrt286/data/Makefile.am create mode 100644 src/conf/topology/sklrt286/data/pvt.c create mode 100644 src/conf/topology/sklrt286/data/pvt_data.c create mode 100644 src/conf/topology/sklrt286/data/pvt_local.h create mode 100644 src/conf/topology/sklrt286/data/skl-tplg-interface.h create mode 100644 src/conf/topology/sklrt286/dmic01_hifi_in-cpr-3.bin create mode 100644 src/conf/topology/sklrt286/dmic01_hifi_in-mi.bin create mode 100644 src/conf/topology/sklrt286/hdmi1_pt_out-cpr-7.bin create mode 100644 src/conf/topology/sklrt286/hdmi1_pt_out-cpr-8.bin create mode 100644 src/conf/topology/sklrt286/hdmi2_pt_out-cpr-10.bin create mode 100644 src/conf/topology/sklrt286/hdmi2_pt_out-cpr-9.bin create mode 100644 src/conf/topology/sklrt286/hdmi3_pt_out-cpr-11.bin create mode 100644 src/conf/topology/sklrt286/hdmi3_pt_out-cpr-12.bin create mode 100644 src/conf/topology/sklrt286/media0_in-cpr-0.bin create mode 100644 src/conf/topology/sklrt286/media0_in-mi.bin create mode 100644 src/conf/topology/sklrt286/media0_out-cpr-6.bin create mode 100644 src/conf/topology/sklrt286/media0_out-mo.bin create mode 100644 src/conf/topology/sklrt286/skl_i2s.conf
Signature · 1 line
1.9.1
PATCH v4 2/3 Add u8 in type_compat.h
From: Shreyas NC <[email protected]>
Skylake headers use u8 data types which were not present in type_compat so add them.
--- include/sound/type_compat.h | 2 ++ 1 file changed, 2 insertions(+)
include/sound/type_compat.h +2 -0
@@ -32,9 +32,11 @@ typedef int32_t __s32;#define __le64 __u64#define __le32 __u32#define __le16 __u16 +#define __le8 __u8#define __be64 __u64#define __be32 __u32#define __be16 __u16 +#define __be8 __u8#endif /* DOC_HIDDEN */ #endif /* __TYPE_COMPAT_H */
Signature · 1 line
1.9.1
PATCH v4 3/3 conf: topology: Generate Private data binary blobs
In reply to Vinod KoulFrom: Shreyas NC <[email protected]>
The DSP modules need private data and that is provided as binary blob. These blobs are compiled from C structures which specify module configuration.
--- configure.ac | 1 + src/conf/topology/sklrt286/data/Makefile.am | 4 + src/conf/topology/sklrt286/data/pvt.c | 1815 ++++++++++++++++++++ src/conf/topology/sklrt286/data/pvt_data.c | 90 + src/conf/topology/sklrt286/data/pvt_local.h | 9 + .../topology/sklrt286/data/skl-tplg-interface.h | 232 +++ 6 files changed, 2151 insertions(+) create mode 100644 src/conf/topology/sklrt286/data/Makefile.am create mode 100644 src/conf/topology/sklrt286/data/pvt.c create mode 100644 src/conf/topology/sklrt286/data/pvt_data.c create mode 100644 src/conf/topology/sklrt286/data/pvt_local.h create mode 100644 src/conf/topology/sklrt286/data/skl-tplg-interface.h
configure.ac +1 -0
@@ -661,6 +661,7 @@ AC_OUTPUT(Makefile doc/Makefile doc/pictures/Makefile doc/doxygen.cfg \ src/conf/topology/Makefile \ src/conf/topology/broadwell/Makefile \ modules/Makefile modules/mixer/Makefile modules/mixer/simple/Makefile \ + src/conf/topology/sklrt286/data/Makefile \ src/conf/topology/sklrt286/Makefile \ alsalisp/Makefile aserver/Makefile \ test/Makefile test/lsb/Makefile \
src/conf/topology/sklrt286/data/Makefile.am new file +4 -0
@@ -0,0 +1,4 @@ +noinst_PROGRAMS = pvt_data +pvt_data_SOURCES = pvt_data.c +AM_CPPFLAGS = \ + -Wall -I$(top_srcdir)/include
src/conf/topology/sklrt286/data/pvt.c new file +1815 -0
1,815 lines not on this page · raw message
src/conf/topology/sklrt286/data/pvt_data.c new file +90 -0
90 lines not on this page · raw message
src/conf/topology/sklrt286/data/pvt_local.h new file +9 -0
@@ -0,0 +1,9 @@ +#include <stdio.h> +#include "skl-tplg-interface.h" + +struct skl_dfw_module_mod { +char name[100 ]; +struct skl_dfw_module skl_dfw_mod; +}; + +
src/conf/topology/sklrt286/data/skl-tplg-interface.h new file +232 -0
232 lines not on this page · raw message
Signature · 1 line
1.9.1
Quoted 9 lines · Vinod Koul
This series adds SKL-i2c conf for simple PCM topology graph
Changes in v4:
- add back the pre-compiled binary blobs
- remove running the binary on intsall stepChanges in v3:
Quoted 8 lines
- remove bin blobs, now they are generated in install step
- hook the tool compilation to alsa-lib and run it on install
- add u8 in alsatype_compat.hShreyas NC (3):
conf: topology: Add Skylake i2s conf
Add u8 intype_compat.h
conf: topology: Generate Private data binary blobs
Applied now (with a slight fix for git bisection and adding the missing .gitignore).
thanks,
Takashi
Quoted 59 lines
configure.ac | 2 + include/sound/type_compat.h | 2 + src/conf/topology/Makefile.am | 2 +- src/conf/topology/sklrt286/Makefile.am | 5 + src/conf/topology/sklrt286/codec0_in-cpr-1.bin | Bin 0 -> 4244 bytes src/conf/topology/sklrt286/codec0_in-mi.bin | Bin 0 -> 4244 bytes src/conf/topology/sklrt286/codec0_out-cpr-4.bin | Bin 0 -> 4244 bytes src/conf/topology/sklrt286/codec0_out-mo.bin | Bin 0 -> 4244 bytes src/conf/topology/sklrt286/codec1_out-cpr-5.bin | Bin 0 -> 4244 bytes src/conf/topology/sklrt286/codec1_out-mo.bin | Bin 0 -> 4244 bytes src/conf/topology/sklrt286/data/Makefile.am | 4 + src/conf/topology/sklrt286/data/pvt.c | 1815 ++++++++++++++++++++ src/conf/topology/sklrt286/data/pvt_data.c | 90 + src/conf/topology/sklrt286/data/pvt_local.h | 9 + .../topology/sklrt286/data/skl-tplg-interface.h | 232 +++ .../topology/sklrt286/dmic01_hifi_in-cpr-3.bin | Bin 0 -> 4244 bytes src/conf/topology/sklrt286/dmic01_hifi_in-mi.bin | Bin 0 -> 4244 bytes src/conf/topology/sklrt286/hdmi1_pt_out-cpr-7.bin | Bin 0 -> 4244 bytes src/conf/topology/sklrt286/hdmi1_pt_out-cpr-8.bin | Bin 0 -> 4244 bytes src/conf/topology/sklrt286/hdmi2_pt_out-cpr-10.bin | Bin 0 -> 4244 bytes src/conf/topology/sklrt286/hdmi2_pt_out-cpr-9.bin | Bin 0 -> 4244 bytes src/conf/topology/sklrt286/hdmi3_pt_out-cpr-11.bin | Bin 0 -> 4244 bytes src/conf/topology/sklrt286/hdmi3_pt_out-cpr-12.bin | Bin 0 -> 4244 bytes src/conf/topology/sklrt286/media0_in-cpr-0.bin | Bin 0 -> 4244 bytes src/conf/topology/sklrt286/media0_in-mi.bin | Bin 0 -> 4244 bytes src/conf/topology/sklrt286/media0_out-cpr-6.bin | Bin 0 -> 4244 bytes src/conf/topology/sklrt286/media0_out-mo.bin | Bin 0 -> 4244 bytes src/conf/topology/sklrt286/skl_i2s.conf | 342 ++++ 28 files changed, 2502 insertions(+), 1 deletion(-) create mode 100644 src/conf/topology/sklrt286/Makefile.am create mode 100644 src/conf/topology/sklrt286/codec0_in-cpr-1.bin create mode 100644 src/conf/topology/sklrt286/codec0_in-mi.bin create mode 100644 src/conf/topology/sklrt286/codec0_out-cpr-4.bin create mode 100644 src/conf/topology/sklrt286/codec0_out-mo.bin create mode 100644 src/conf/topology/sklrt286/codec1_out-cpr-5.bin create mode 100644 src/conf/topology/sklrt286/codec1_out-mo.bin create mode 100644 src/conf/topology/sklrt286/data/Makefile.am create mode 100644 src/conf/topology/sklrt286/data/pvt.c create mode 100644 src/conf/topology/sklrt286/data/pvt_data.c create mode 100644 src/conf/topology/sklrt286/data/pvt_local.h create mode 100644 src/conf/topology/sklrt286/data/skl-tplg-interface.h create mode 100644 src/conf/topology/sklrt286/dmic01_hifi_in-cpr-3.bin create mode 100644 src/conf/topology/sklrt286/dmic01_hifi_in-mi.bin create mode 100644 src/conf/topology/sklrt286/hdmi1_pt_out-cpr-7.bin create mode 100644 src/conf/topology/sklrt286/hdmi1_pt_out-cpr-8.bin create mode 100644 src/conf/topology/sklrt286/hdmi2_pt_out-cpr-10.bin create mode 100644 src/conf/topology/sklrt286/hdmi2_pt_out-cpr-9.bin create mode 100644 src/conf/topology/sklrt286/hdmi3_pt_out-cpr-11.bin create mode 100644 src/conf/topology/sklrt286/hdmi3_pt_out-cpr-12.bin create mode 100644 src/conf/topology/sklrt286/media0_in-cpr-0.bin create mode 100644 src/conf/topology/sklrt286/media0_in-mi.bin create mode 100644 src/conf/topology/sklrt286/media0_out-cpr-6.bin create mode 100644 src/conf/topology/sklrt286/media0_out-mo.bin create mode 100644 src/conf/topology/sklrt286/skl_i2s.confSignature · 1 line
1.9.1
Quoted 15 lines · Takashi Iwai
Quoted 13 lines · Vinod Koul
This series adds SKL-i2c conf for simple PCM topology graph
Changes in v4:
- add back the pre-compiled binary blobs
- remove running the binary on intsall stepChanges in v3:
- remove bin blobs, now they are generated in install step
- hook the tool compilation to alsa-lib and run it on install
- add u8 in alsatype_compat.h
Quoted 7 lines
Quoted 4 lines
Shreyas NC (3):
conf: topology: Add Skylake i2s conf
Add u8 intype_compat.h
conf: topology: Generate Private data binary blobsApplied now (with a slight fix for git bisection and adding the missing .gitignore).
Thanks a bunch :)
Signature · 1 line
~Vinod