ASoC: Intel: Add Broxton Machine
Subsystems (3)
cover ASoC: Intel: Add Broxton Machine
Broxton uses SSP5 for audio on Intel board, so add the 6 SSPs and then machine driver which uses RT298 codec
Pardha Saradhi K (1):
ASoC: Intel: Skylake: Add more SSP DAIs
Ramesh Babu (1):
ASoC: Intel: Add Broxton-P machine driver
sound/soc/intel/Kconfig | 15 ++ sound/soc/intel/boards/Makefile | 2 + sound/soc/intel/boards/bxt_rt298.c | 353 +++++++++++++++++++++++++++++++++++++ sound/soc/intel/skylake/skl-pcm.c | 72 ++++++++ 4 files changed, 442 insertions(+) create mode 100644 sound/soc/intel/boards/bxt_rt298.c
Signature · 1 line
1.9.1
PATCH 1/2 ASoC: Intel: Skylake: Add more SSP DAIs
From: Pardha Saradhi K <[email protected]>
The Broxton-P platform has 6 SSPs so we need to add ssp2 thru ssp5 to DAI list for the driver.
--- sound/soc/intel/skylake/skl-pcm.c | 72 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 72 insertions(+)
sound/soc/intel/skylake/skl-pcm.c +72 -0
@@ -770,6 +770,78 @@ static struct snd_soc_dai_driver skl_platform_dai[] = { }, }, { + .name = "SSP2 Pin", + .ops = &skl_be_ssp_dai_ops, + .playback = { + .stream_name = "ssp2 Tx", + .channels_min = HDA_STEREO, + .channels_max = HDA_STEREO, + .rates = SNDRV_PCM_RATE_48000, + .formats = SNDRV_PCM_FMTBIT_S16_LE, + }, + .capture = { + .stream_name = "ssp2 Rx", + .channels_min = HDA_STEREO, + .channels_max = HDA_STEREO, + .rates = SNDRV_PCM_RATE_48000, + .formats = SNDRV_PCM_FMTBIT_S16_LE, + }, +}, +{ + .name = "SSP3 Pin", + .ops = &skl_be_ssp_dai_ops, + .playback = { + .stream_name = "ssp3 Tx", + .channels_min = HDA_STEREO, + .channels_max = HDA_STEREO, + .rates = SNDRV_PCM_RATE_48000, + .formats = SNDRV_PCM_FMTBIT_S16_LE, + }, + .capture = { + .stream_name = "ssp3 Rx", + .channels_min = HDA_STEREO, + .channels_max = HDA_STEREO, + .rates = SNDRV_PCM_RATE_48000, + .formats = SNDRV_PCM_FMTBIT_S16_LE, + }, +}, +{ + .name = "SSP4 Pin", + .ops = &skl_be_ssp_dai_ops, + .playback = { + .stream_name = "ssp4 Tx", + .channels_min = HDA_STEREO, + .channels_max = HDA_STEREO, + .rates = SNDRV_PCM_RATE_48000, + .formats = SNDRV_PCM_FMTBIT_S16_LE, + }, + .capture = { + .stream_name = "ssp4 Rx", + .channels_min = HDA_STEREO, + .channels_max = HDA_STEREO, + .rates = SNDRV_PCM_RATE_48000, + .formats = SNDRV_PCM_FMTBIT_S16_LE, + }, +}, +{ + .name = "SSP5 Pin", + .ops = &skl_be_ssp_dai_ops, + .playback = { + .stream_name = "ssp5 Tx", + .channels_min = HDA_STEREO, + .channels_max = HDA_STEREO, + .rates = SNDRV_PCM_RATE_48000, + .formats = SNDRV_PCM_FMTBIT_S16_LE, + }, + .capture = { + .stream_name = "ssp5 Rx", + .channels_min = HDA_STEREO, + .channels_max = HDA_STEREO, + .rates = SNDRV_PCM_RATE_48000, + .formats = SNDRV_PCM_FMTBIT_S16_LE, + }, +}, +{ .name = "iDisp1 Pin", .ops = &skl_link_dai_ops, .playback = {
Signature · 1 line
1.9.1
Mark Brown
maintainerApplied "ASoC: Intel: Skylake: Add more SSP DAIs" to the asoc tree
The patch
ASoC: Intel: Skylake: Add more SSP DAIs
has been applied to the asoc tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
Quoted 1 line
From
fcc494af3cfaefc9f8a51c3c7e7f208a0553b28fMon Sep 17 00:00:00 2001
From: Pardha Saradhi K <[email protected]>
Date: Tue, 10 May 2016 22:02:05 +0530
Subject: [PATCH] ASoC: Intel: Skylake: Add more SSP DAIs
The Broxton-P platform has 6 SSPs so we need to add ssp2 thru ssp5 to DAI list for the driver.
--- sound/soc/intel/skylake/skl-pcm.c | 72 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 72 insertions(+)
sound/soc/intel/skylake/skl-pcm.c +72 -0
@@ -770,6 +770,78 @@ static struct snd_soc_dai_driver skl_platform_dai[] = { }, }, { + .name = "SSP2 Pin", + .ops = &skl_be_ssp_dai_ops, + .playback = { + .stream_name = "ssp2 Tx", + .channels_min = HDA_STEREO, + .channels_max = HDA_STEREO, + .rates = SNDRV_PCM_RATE_48000, + .formats = SNDRV_PCM_FMTBIT_S16_LE, + }, + .capture = { + .stream_name = "ssp2 Rx", + .channels_min = HDA_STEREO, + .channels_max = HDA_STEREO, + .rates = SNDRV_PCM_RATE_48000, + .formats = SNDRV_PCM_FMTBIT_S16_LE, + }, +}, +{ + .name = "SSP3 Pin", + .ops = &skl_be_ssp_dai_ops, + .playback = { + .stream_name = "ssp3 Tx", + .channels_min = HDA_STEREO, + .channels_max = HDA_STEREO, + .rates = SNDRV_PCM_RATE_48000, + .formats = SNDRV_PCM_FMTBIT_S16_LE, + }, + .capture = { + .stream_name = "ssp3 Rx", + .channels_min = HDA_STEREO, + .channels_max = HDA_STEREO, + .rates = SNDRV_PCM_RATE_48000, + .formats = SNDRV_PCM_FMTBIT_S16_LE, + }, +}, +{ + .name = "SSP4 Pin", + .ops = &skl_be_ssp_dai_ops, + .playback = { + .stream_name = "ssp4 Tx", + .channels_min = HDA_STEREO, + .channels_max = HDA_STEREO, + .rates = SNDRV_PCM_RATE_48000, + .formats = SNDRV_PCM_FMTBIT_S16_LE, + }, + .capture = { + .stream_name = "ssp4 Rx", + .channels_min = HDA_STEREO, + .channels_max = HDA_STEREO, + .rates = SNDRV_PCM_RATE_48000, + .formats = SNDRV_PCM_FMTBIT_S16_LE, + }, +}, +{ + .name = "SSP5 Pin", + .ops = &skl_be_ssp_dai_ops, + .playback = { + .stream_name = "ssp5 Tx", + .channels_min = HDA_STEREO, + .channels_max = HDA_STEREO, + .rates = SNDRV_PCM_RATE_48000, + .formats = SNDRV_PCM_FMTBIT_S16_LE, + }, + .capture = { + .stream_name = "ssp5 Rx", + .channels_min = HDA_STEREO, + .channels_max = HDA_STEREO, + .rates = SNDRV_PCM_RATE_48000, + .formats = SNDRV_PCM_FMTBIT_S16_LE, + }, +}, +{ .name = "iDisp1 Pin", .ops = &skl_link_dai_ops, .playback = {
Signature · 1 line
2.8.1
PATCH 2/2 ASoC: Intel: Add Broxton-P machine driver
In reply to Vinod KoulFrom: Ramesh Babu <[email protected]>
This patch adds the Broxton-P machine driver for Intel Broxton-P reference boards. This machine uses the RT298 codec
--- sound/soc/intel/Kconfig | 15 ++ sound/soc/intel/boards/Makefile | 2 + sound/soc/intel/boards/bxt_rt298.c | 353 +++++++++++++++++++++++++++++++++++++ 3 files changed, 370 insertions(+) create mode 100644 sound/soc/intel/boards/bxt_rt298.c
sound/soc/intel/Kconfig +15 -0
@@ -58,6 +58,21 @@ config SND_SOC_INTEL_HASWELL_MACH Say Y if you have such a device If unsure select "N". +config SND_SOC_INTEL_BXT_RT298_MACH + tristate "ASoC Audio driver for Broxton with RT298 I2S mode" + depends on X86 && ACPI && I2C + select SND_SOC_INTEL_SST + select SND_SOC_INTEL_SKYLAKE + select SND_SOC_RT298 + select SND_SOC_DMIC + select SND_SOC_HDAC_HDMI + select SND_HDA_DSP_LOADER + help + This adds support for ASoC machine driver for Broxton platforms + with RT286 I2S audio codec. + Say Y if you have such a device + If unsure select "N". + config SND_SOC_INTEL_BYT_RT5640_MACH tristate "ASoC Audio driver for Intel Baytrail with RT5640 codec" depends on X86_INTEL_LPSS && I2C
sound/soc/intel/boards/Makefile +2 -0
@@ -2,6 +2,7 @@ snd-soc-sst-haswell-objs := haswell.o snd-soc-sst-byt-rt5640-mach-objs := byt-rt5640.o snd-soc-sst-byt-max98090-mach-objs := byt-max98090.o snd-soc-sst-broadwell-objs := broadwell.o +snd-soc-sst-bxt-rt298-objs := bxt_rt298.o snd-soc-sst-bytcr-rt5640-objs := bytcr_rt5640.o snd-soc-sst-bytcr-rt5651-objs := bytcr_rt5651.o snd-soc-sst-cht-bsw-rt5672-objs := cht_bsw_rt5672.o
@@ -14,6 +15,7 @@ snd-soc-skl_nau88l25_ssm4567-objs := skl_nau88l25_ssm4567.o obj-$(CONFIG_SND_SOC_INTEL_HASWELL_MACH) += snd-soc-sst-haswell.o obj-$(CONFIG_SND_SOC_INTEL_BYT_RT5640_MACH) += snd-soc-sst-byt-rt5640-mach.o obj-$(CONFIG_SND_SOC_INTEL_BYT_MAX98090_MACH) += snd-soc-sst-byt-max98090-mach.o +obj-$(CONFIG_SND_SOC_INTEL_BXT_RT298_MACH) += snd-soc-sst-bxt-rt298.o obj-$(CONFIG_SND_SOC_INTEL_BROADWELL_MACH) += snd-soc-sst-broadwell.o obj-$(CONFIG_SND_SOC_INTEL_BYTCR_RT5640_MACH) += snd-soc-sst-bytcr-rt5640.o obj-$(CONFIG_SND_SOC_INTEL_BYTCR_RT5651_MACH) += snd-soc-sst-bytcr-rt5651.o
sound/soc/intel/boards/bxt_rt298.c new file +353 -0
353 lines not on this page · raw message
Signature · 1 line
1.9.1
Mark Brown
maintainerApplied "ASoC: Intel: Add Broxton-P machine driver" to the asoc tree
The patch
ASoC: Intel: Add Broxton-P machine driver
has been applied to the asoc tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
Quoted 1 line
From
76016322ec5670052fdabb08c586d6b16bd5062fMon Sep 17 00:00:00 2001
From: Ramesh Babu <[email protected]>
Date: Tue, 10 May 2016 22:02:06 +0530
Subject: [PATCH] ASoC: Intel: Add Broxton-P machine driver
This patch adds the Broxton-P machine driver for Intel Broxton-P reference boards. This machine uses the RT298 codec
--- sound/soc/intel/Kconfig | 15 ++ sound/soc/intel/boards/Makefile | 2 + sound/soc/intel/boards/bxt_rt298.c | 353 +++++++++++++++++++++++++++++++++++++ 3 files changed, 370 insertions(+) create mode 100644 sound/soc/intel/boards/bxt_rt298.c
sound/soc/intel/Kconfig +15 -0
@@ -58,6 +58,21 @@ config SND_SOC_INTEL_HASWELL_MACH Say Y if you have such a device If unsure select "N". +config SND_SOC_INTEL_BXT_RT298_MACH + tristate "ASoC Audio driver for Broxton with RT298 I2S mode" + depends on X86 && ACPI && I2C + select SND_SOC_INTEL_SST + select SND_SOC_INTEL_SKYLAKE + select SND_SOC_RT298 + select SND_SOC_DMIC + select SND_SOC_HDAC_HDMI + select SND_HDA_DSP_LOADER + help + This adds support for ASoC machine driver for Broxton platforms + with RT286 I2S audio codec. + Say Y if you have such a device + If unsure select "N". + config SND_SOC_INTEL_BYT_RT5640_MACH tristate "ASoC Audio driver for Intel Baytrail with RT5640 codec" depends on X86_INTEL_LPSS && I2C
sound/soc/intel/boards/Makefile +2 -0
@@ -2,6 +2,7 @@ snd-soc-sst-haswell-objs := haswell.o snd-soc-sst-byt-rt5640-mach-objs := byt-rt5640.o snd-soc-sst-byt-max98090-mach-objs := byt-max98090.o snd-soc-sst-broadwell-objs := broadwell.o +snd-soc-sst-bxt-rt298-objs := bxt_rt298.o snd-soc-sst-bytcr-rt5640-objs := bytcr_rt5640.o snd-soc-sst-bytcr-rt5651-objs := bytcr_rt5651.o snd-soc-sst-cht-bsw-rt5672-objs := cht_bsw_rt5672.o
@@ -14,6 +15,7 @@ snd-soc-skl_nau88l25_ssm4567-objs := skl_nau88l25_ssm4567.o obj-$(CONFIG_SND_SOC_INTEL_HASWELL_MACH) += snd-soc-sst-haswell.o obj-$(CONFIG_SND_SOC_INTEL_BYT_RT5640_MACH) += snd-soc-sst-byt-rt5640-mach.o obj-$(CONFIG_SND_SOC_INTEL_BYT_MAX98090_MACH) += snd-soc-sst-byt-max98090-mach.o +obj-$(CONFIG_SND_SOC_INTEL_BXT_RT298_MACH) += snd-soc-sst-bxt-rt298.o obj-$(CONFIG_SND_SOC_INTEL_BROADWELL_MACH) += snd-soc-sst-broadwell.o obj-$(CONFIG_SND_SOC_INTEL_BYTCR_RT5640_MACH) += snd-soc-sst-bytcr-rt5640.o obj-$(CONFIG_SND_SOC_INTEL_BYTCR_RT5651_MACH) += snd-soc-sst-bytcr-rt5651.o
sound/soc/intel/boards/bxt_rt298.c new file +353 -0
353 lines not on this page · raw message
Signature · 1 line
2.8.1