Skip to contentSkip to conversation

ASoC: Intel: Skylake: Add HDA link management

PATCH In review Vinod Koul 3 participants 8 messages May 12, 2016 – May 13, 2016

Subsystems (3)
lore
Share & tools
lore

Vinod Koul

author
#0 lore raw

v3 cover ASoC: Intel: Skylake: Add HDA link management

HDA links are always kept On, this patch adds link management routines in hdac extended core and it's use in Skylake driver and hdmi codec (runs on HDA link)

The aim of serial is to shut down the links when not in use and keep them active when a user is active. The user can activate link by taking reference to the link when required.

When all links are closed, the command DMAs are turned off as well. On first link power up, the command DMAs are turned on first.

First patch touches HDA core, and rest two are dependent on it so Takashi if you are okay, pls ACK it and we can merge thru ASoC tree

Changes in v3:
- rename the varaible for dmas and make it bool
- change the logic of checking links for powering off dmas as suggested by takashi

Changes in v2:
- use mutex instead of spinlock

Vinod Koul (3):
ALSA: hdac: add link pm and ref counting
ASoC: Intel: Skylake: add link mangement
ASoC: hdac_hdmi: add link management

 include/sound/hdaudio_ext.h         | 13 ++++++++
 sound/hda/ext/hdac_ext_bus.c        |  3 ++
 sound/hda/ext/hdac_ext_controller.c | 66 +++++++++++++++++++++++++++++++++++++
 sound/soc/codecs/hdac_hdmi.c        | 32 ++++++++++++++++--
 sound/soc/intel/skylake/skl-pcm.c   |  1 -
 sound/soc/intel/skylake/skl.c       | 34 +++++++++++++++++++
 6 files changed, 146 insertions(+), 3 deletions(-)
Signature · 1 line
1.9.1
author
#1 lore raw

PATCH v3 1/3 ALSA: hdac: add link pm and ref counting

The HDA links can be switched off when not is use, similarly command DMA can be stopped as well. This calls for a reference counting mechanism on the link by it's users to manage the link power. The DMA can be turned off when all links are off

For this we add two APIs
snd_hdac_ext_bus_link_get
snd_hdac_ext_bus_link_put

They help users to turn up/down link and manage the DMA as well

---
 include/sound/hdaudio_ext.h         | 13 ++++++++
 sound/hda/ext/hdac_ext_bus.c        |  3 ++
 sound/hda/ext/hdac_ext_controller.c | 66 +++++++++++++++++++++++++++++++++++++
 3 files changed, 82 insertions(+)
include/sound/hdaudio_ext.h +13 -0
index 07fa59237feb..b9593b201599 100644
@@ -14,6 +14,8 @@
  * @gtscap: gts capabilities pointer
  * @drsmcap: dma resume capabilities pointer
  * @hlink_list: link list of HDA links
+ * @lock: lock for link mgmt
+ * @cmd_dma_state: state of cmd DMAs: CORB and RIRB
  */
 struct hdac_ext_bus {
 	struct hdac_bus bus;
@@ -27,6 +29,9 @@ struct hdac_ext_bus {
 	void __iomem *drsmcap;
 
 	struct list_head hlink_list;
+
+	struct mutex lock;
+	bool cmd_dma_state;
 };
 
 int snd_hdac_ext_bus_init(struct hdac_ext_bus *sbus, struct device *dev,
@@ -142,6 +147,9 @@ struct hdac_ext_link {
 	void __iomem *ml_addr; /* link output stream reg pointer */
 	u32 lcaps;   /* link capablities */
 	u16 lsdiid;  /* link sdi identifier */
+
+	int ref_count;
+
 	struct list_head list;
 };
 
@@ -154,6 +162,11 @@ void snd_hdac_ext_link_set_stream_id(struct hdac_ext_link *link,
 void snd_hdac_ext_link_clear_stream_id(struct hdac_ext_link *link,
 				 int stream);
 
+int snd_hdac_ext_bus_link_get(struct hdac_ext_bus *ebus,
+				struct hdac_ext_link *link);
+int snd_hdac_ext_bus_link_put(struct hdac_ext_bus *ebus,
+				struct hdac_ext_link *link);
+
 /* update register macro */
 #define snd_hdac_updatel(addr, reg, mask, val)		\
 	writel(((readl(addr + reg) & ~(mask)) | (val)), \
sound/hda/ext/hdac_ext_bus.c +3 -0
index 2433f7c81472..3b7ae24900fd 100644
@@ -105,6 +105,9 @@ int snd_hdac_ext_bus_init(struct hdac_ext_bus *ebus, struct device *dev,
 	INIT_LIST_HEAD(&ebus->hlink_list);
 	ebus->idx = idx++;
 
+	mutex_init(&ebus->lock);
+	ebus->cmd_dma_state = true;
+
 	return 0;
 }
 EXPORT_SYMBOL_GPL(snd_hdac_ext_bus_init);
sound/hda/ext/hdac_ext_controller.c +66 -0

75 lines not on this page · raw message

Signature · 1 line
1.9.1
author
#2 lore raw

Re: [PATCH v3 1/3] ALSA: hdac: add link pm and ref counting

Quoted 10 lines · Vinod Koul

The HDA links can be switched off when not is use, similarly command DMA can be stopped as well. This calls for a reference counting mechanism on the link by it's users to manage the link power. The DMA can be turned off when all links are off

For this we add two APIs
snd_hdac_ext_bus_link_get
snd_hdac_ext_bus_link_put

They help users to turn up/down link and manage the DMA as well

Takashi,

Does this look fine to you? If so can we have you ACK please..

Quoted 152 lines
---
 include/sound/hdaudio_ext.h         | 13 ++++++++
 sound/hda/ext/hdac_ext_bus.c        |  3 ++
 sound/hda/ext/hdac_ext_controller.c | 66 +++++++++++++++++++++++++++++++++++++
 3 files changed, 82 insertions(+)
include/sound/hdaudio_ext.h +13 -0
index 07fa59237feb..b9593b201599 100644
@@ -14,6 +14,8 @@
  * @gtscap: gts capabilities pointer
  * @drsmcap: dma resume capabilities pointer
  * @hlink_list: link list of HDA links
+ * @lock: lock for link mgmt
+ * @cmd_dma_state: state of cmd DMAs: CORB and RIRB
  */
 struct hdac_ext_bus {
 	struct hdac_bus bus;
@@ -27,6 +29,9 @@ struct hdac_ext_bus {
 	void __iomem *drsmcap;
 
 	struct list_head hlink_list;
+
+	struct mutex lock;
+	bool cmd_dma_state;
 };
 
 int snd_hdac_ext_bus_init(struct hdac_ext_bus *sbus, struct device *dev,
@@ -142,6 +147,9 @@ struct hdac_ext_link {
 	void __iomem *ml_addr; /* link output stream reg pointer */
 	u32 lcaps;   /* link capablities */
 	u16 lsdiid;  /* link sdi identifier */
+
+	int ref_count;
+
 	struct list_head list;
 };
 
@@ -154,6 +162,11 @@ void snd_hdac_ext_link_set_stream_id(struct hdac_ext_link *link,
 void snd_hdac_ext_link_clear_stream_id(struct hdac_ext_link *link,
 				 int stream);
 
+int snd_hdac_ext_bus_link_get(struct hdac_ext_bus *ebus,
+				struct hdac_ext_link *link);
+int snd_hdac_ext_bus_link_put(struct hdac_ext_bus *ebus,
+				struct hdac_ext_link *link);
+
 /* update register macro */
 #define snd_hdac_updatel(addr, reg, mask, val)		\
 	writel(((readl(addr + reg) & ~(mask)) | (val)), \
sound/hda/ext/hdac_ext_bus.c +3 -0
index 2433f7c81472..3b7ae24900fd 100644
@@ -105,6 +105,9 @@ int snd_hdac_ext_bus_init(struct hdac_ext_bus *ebus, struct device *dev,
 	INIT_LIST_HEAD(&ebus->hlink_list);
 	ebus->idx = idx++;
 
+	mutex_init(&ebus->lock);
+	ebus->cmd_dma_state = true;
+
 	return 0;
 }
 EXPORT_SYMBOL_GPL(snd_hdac_ext_bus_init);
sound/hda/ext/hdac_ext_controller.c +66 -0
index 548cc1e4114b..860f8cad6602 100644
@@ -186,6 +186,9 @@ int snd_hdac_ext_bus_get_ml_capabilities(struct hdac_ext_bus *ebus)
 		hlink->lcaps  = readl(hlink->ml_addr + AZX_REG_ML_LCAP);
 		hlink->lsdiid = readw(hlink->ml_addr + AZX_REG_ML_LSDIID);
 
+		/* since link in On, update the ref */
+		hlink->ref_count = 1;
+
 		list_add_tail(&hlink->list, &ebus->hlink_list);
 	}
 
@@ -327,3 +330,66 @@ int snd_hdac_ext_bus_link_power_down_all(struct hdac_ext_bus *ebus)
 	return 0;
 }
 EXPORT_SYMBOL_GPL(snd_hdac_ext_bus_link_power_down_all);
+
+int snd_hdac_ext_bus_link_get(struct hdac_ext_bus *ebus,
+				struct hdac_ext_link *link)
+{
+	int ret = 0;
+
+	mutex_lock(&ebus->lock);
+
+	/*
+	 * if we move from 0 to 1, count will be 1 so power up this link
+	 * as well, also check the dma status and trigger that
+	 */
+	if (++link->ref_count == 1) {
+		if (!ebus->cmd_dma_state) {
+			snd_hdac_bus_init_cmd_io(&ebus->bus);
+			ebus->cmd_dma_state = true;
+		}
+
+		ret = snd_hdac_ext_bus_link_power_up(link);
+	}
+
+	mutex_unlock(&ebus->lock);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(snd_hdac_ext_bus_link_get);
+
+int snd_hdac_ext_bus_link_put(struct hdac_ext_bus *ebus,
+				struct hdac_ext_link *link)
+{
+	int ret = 0;
+	struct hdac_ext_link *hlink;
+	bool link_up = false;
+
+	mutex_lock(&ebus->lock);
+
+	/*
+	 * if we move from 1 to 0, count will be 0
+	 * so power down this link as well
+	 */
+	if (--link->ref_count == 0) {
+		ret = snd_hdac_ext_bus_link_power_down(link);
+
+		/*
+		 * now check if all links are off, if so turn off
+		 * cmd dma as well
+		 */
+		list_for_each_entry(hlink, &ebus->hlink_list, list) {
+			if (hlink->ref_count) {
+				link_up = true;
+				break;
+			}
+		}
+
+		if (!link_up) {
+			snd_hdac_bus_stop_cmd_io(&ebus->bus);
+			ebus->cmd_dma_state = false;
+		}
+	}
+
+	mutex_unlock(&ebus->lock);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(snd_hdac_ext_bus_link_put);
Signature · 1 line
1.9.1
Signature · 1 line
~Vinod
Acked-by
#3 lore raw

Re: [PATCH v3 1/3] ALSA: hdac: add link pm and ref counting

Quoted 11 lines · Vinod Koul
Quoted 9 lines · Vinod Koul

The HDA links can be switched off when not is use, similarly command DMA can be stopped as well. This calls for a reference counting mechanism on the link by it's users to manage the link power. The DMA can be turned off when all links are off

For this we add two APIs
snd_hdac_ext_bus_link_get
snd_hdac_ext_bus_link_put

Quoted 5 lines
Quoted 1 line

They help users to turn up/down link and manage the DMA as well

Takashi,

Does this look fine to you? If so can we have you ACK please..

Takashi

maintainer
#4 lore raw

Applied "ALSA: hdac: add link pm and ref counting" to the asoc tree

In reply to Vinod Koul

The patch

ALSA: hdac: add link pm and ref counting

has been applied to the asoc tree at

git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark

Quoted 1 line

From 4446085d21e75dd6c0c45577f12db0bd7c7bf35f Mon Sep 17 00:00:00 2001

From: Vinod Koul <[email protected]>
Date: Thu, 12 May 2016 08:58:53 +0530
Subject: [PATCH] ALSA: hdac: add link pm and ref counting

The HDA links can be switched off when not is use, similarly command DMA can be stopped as well. This calls for a reference counting mechanism on the link by it's users to manage the link power. The DMA can be turned off when all links are off

For this we add two APIs
snd_hdac_ext_bus_link_get
snd_hdac_ext_bus_link_put

They help users to turn up/down link and manage the DMA as well

---
 include/sound/hdaudio_ext.h         | 13 ++++++++
 sound/hda/ext/hdac_ext_bus.c        |  3 ++
 sound/hda/ext/hdac_ext_controller.c | 66 +++++++++++++++++++++++++++++++++++++
 3 files changed, 82 insertions(+)
include/sound/hdaudio_ext.h +13 -0
index 07fa59237feb..b9593b201599 100644
@@ -14,6 +14,8 @@
  * @gtscap: gts capabilities pointer
  * @drsmcap: dma resume capabilities pointer
  * @hlink_list: link list of HDA links
+ * @lock: lock for link mgmt
+ * @cmd_dma_state: state of cmd DMAs: CORB and RIRB
  */
 struct hdac_ext_bus {
 	struct hdac_bus bus;
@@ -27,6 +29,9 @@ struct hdac_ext_bus {
 	void __iomem *drsmcap;
 
 	struct list_head hlink_list;
+
+	struct mutex lock;
+	bool cmd_dma_state;
 };
 
 int snd_hdac_ext_bus_init(struct hdac_ext_bus *sbus, struct device *dev,
@@ -142,6 +147,9 @@ struct hdac_ext_link {
 	void __iomem *ml_addr; /* link output stream reg pointer */
 	u32 lcaps;   /* link capablities */
 	u16 lsdiid;  /* link sdi identifier */
+
+	int ref_count;
+
 	struct list_head list;
 };
 
@@ -154,6 +162,11 @@ void snd_hdac_ext_link_set_stream_id(struct hdac_ext_link *link,
 void snd_hdac_ext_link_clear_stream_id(struct hdac_ext_link *link,
 				 int stream);
 
+int snd_hdac_ext_bus_link_get(struct hdac_ext_bus *ebus,
+				struct hdac_ext_link *link);
+int snd_hdac_ext_bus_link_put(struct hdac_ext_bus *ebus,
+				struct hdac_ext_link *link);
+
 /* update register macro */
 #define snd_hdac_updatel(addr, reg, mask, val)		\
 	writel(((readl(addr + reg) & ~(mask)) | (val)), \
sound/hda/ext/hdac_ext_bus.c +3 -0
index 2433f7c81472..3b7ae24900fd 100644
@@ -105,6 +105,9 @@ int snd_hdac_ext_bus_init(struct hdac_ext_bus *ebus, struct device *dev,
 	INIT_LIST_HEAD(&ebus->hlink_list);
 	ebus->idx = idx++;
 
+	mutex_init(&ebus->lock);
+	ebus->cmd_dma_state = true;
+
 	return 0;
 }
 EXPORT_SYMBOL_GPL(snd_hdac_ext_bus_init);
sound/hda/ext/hdac_ext_controller.c +66 -0

75 lines not on this page · raw message

Signature · 1 line
2.8.1
author
#5 lore raw

PATCH v3 2/3 ASoC: Intel: Skylake: add link management

In reply to Vinod Koul

Use shiny new link APIs to manage the links. Also remove old link configuration logic from driver.

We need to keep link and cmd dma to off during active suspend to allow system to enter low power state and turn it on if the link and cmd dma was on before active suspend in active resume.

---
 sound/soc/intel/skylake/skl-pcm.c |  1 -
 sound/soc/intel/skylake/skl.c     | 34 ++++++++++++++++++++++++++++++++++
 2 files changed, 34 insertions(+), 1 deletion(-)
sound/soc/intel/skylake/skl-pcm.c +0 -1
index 4494db6a05f5..15480234b20b 100644
@@ -533,7 +533,6 @@ static int skl_link_pcm_prepare(struct snd_pcm_substream *substream,
 	if (!link)
 		return -EINVAL;
 
-	snd_hdac_ext_bus_link_power_up(link);
 	snd_hdac_ext_link_stream_reset(link_dev);
 
 	snd_hdac_ext_link_stream_setup(link_dev, format_val);
sound/soc/intel/skylake/skl.c +34 -0
index 83e985c0c0c9..06d8c263c68f 100644
@@ -229,7 +229,12 @@ static int skl_suspend(struct device *dev)
 	 * running, we need to save the state for these and continue
 	 */
 	if (skl->supend_active) {
+		/* turn off the links and stop the CORB/RIRB DMA if it is On */
 		snd_hdac_ext_bus_link_power_down_all(ebus);
+
+		if (ebus->cmd_dma_state)
+			snd_hdac_bus_stop_cmd_io(&ebus->bus);
+
 		enable_irq_wake(bus->irq);
 		pci_save_state(pci);
 		pci_disable_device(pci);
@@ -255,6 +260,7 @@ static int skl_resume(struct device *dev)
 	struct hdac_ext_bus *ebus = pci_get_drvdata(pci);
 	struct skl *skl  = ebus_to_skl(ebus);
 	struct hdac_bus *bus = ebus_to_hbus(ebus);
+	struct hdac_ext_link *hlink = NULL;
 	int ret;
 
 	/* Turned OFF in HDMI codec driver after codec reconfiguration */
@@ -276,8 +282,29 @@ static int skl_resume(struct device *dev)
 		ret = pci_enable_device(pci);
 		snd_hdac_ext_bus_link_power_up_all(ebus);
 		disable_irq_wake(bus->irq);
+		/*
+		 * turn On the links which are On before active suspend
+		 * and start the CORB/RIRB DMA if On before
+		 * active suspend.
+		 */
+		list_for_each_entry(hlink, &ebus->hlink_list, list) {
+			if (hlink->ref_count)
+				snd_hdac_ext_bus_link_power_up(hlink);
+		}
+
+		if (ebus->cmd_dma_state)
+			snd_hdac_bus_init_cmd_io(&ebus->bus);
 	} else {
 		ret = _skl_resume(ebus);
+
+		/* turn off the links which are off before suspend */
+		list_for_each_entry(hlink, &ebus->hlink_list, list) {
+			if (!hlink->ref_count)
+				snd_hdac_ext_bus_link_power_down(hlink);
+		}
+
+		if (!ebus->cmd_dma_state)
+			snd_hdac_bus_stop_cmd_io(&ebus->bus);
 	}
 
 	return ret;
@@ -613,6 +640,7 @@ static int skl_probe(struct pci_dev *pci,
 	struct skl *skl;
 	struct hdac_ext_bus *ebus = NULL;
 	struct hdac_bus *bus = NULL;
+	struct hdac_ext_link *hlink = NULL;
 	int err;
 
 	/* we use ext core ops, so provide NULL for ops here */
@@ -679,6 +707,12 @@ static int skl_probe(struct pci_dev *pci,
 		}
 	}
 
+	/*
+	 * we are done probling so decrement link counts
+	 */
+	list_for_each_entry(hlink, &ebus->hlink_list, list)
+		snd_hdac_ext_bus_link_put(ebus, hlink);
+
 	/*configure PM */
 	pm_runtime_put_noidle(bus->dev);
 	pm_runtime_allow(bus->dev);
Signature · 1 line
1.9.1
maintainer
#6 lore raw

Applied "ASoC: Intel: Skylake: add link management" to the asoc tree

The patch

ASoC: Intel: Skylake: add link management

has been applied to the asoc tree at

git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark

Quoted 1 line

From cce6c149eba3aabf678ffea91ac1e4103b9c185e Mon Sep 17 00:00:00 2001

From: Vinod Koul <[email protected]>
Date: Thu, 12 May 2016 08:58:54 +0530
Subject: [PATCH] ASoC: Intel: Skylake: add link management

Use shiny new link APIs to manage the links. Also remove old link configuration logic from driver.

We need to keep link and cmd dma to off during active suspend to allow system to enter low power state and turn it on if the link and cmd dma was on before active suspend in active resume.

---
 sound/soc/intel/skylake/skl-pcm.c |  1 -
 sound/soc/intel/skylake/skl.c     | 34 ++++++++++++++++++++++++++++++++++
 2 files changed, 34 insertions(+), 1 deletion(-)
sound/soc/intel/skylake/skl-pcm.c +0 -1
index 4494db6a05f5..15480234b20b 100644
@@ -533,7 +533,6 @@ static int skl_link_pcm_prepare(struct snd_pcm_substream *substream,
 	if (!link)
 		return -EINVAL;
 
-	snd_hdac_ext_bus_link_power_up(link);
 	snd_hdac_ext_link_stream_reset(link_dev);
 
 	snd_hdac_ext_link_stream_setup(link_dev, format_val);
sound/soc/intel/skylake/skl.c +34 -0
index 83e985c0c0c9..06d8c263c68f 100644
@@ -229,7 +229,12 @@ static int skl_suspend(struct device *dev)
 	 * running, we need to save the state for these and continue
 	 */
 	if (skl->supend_active) {
+		/* turn off the links and stop the CORB/RIRB DMA if it is On */
 		snd_hdac_ext_bus_link_power_down_all(ebus);
+
+		if (ebus->cmd_dma_state)
+			snd_hdac_bus_stop_cmd_io(&ebus->bus);
+
 		enable_irq_wake(bus->irq);
 		pci_save_state(pci);
 		pci_disable_device(pci);
@@ -255,6 +260,7 @@ static int skl_resume(struct device *dev)
 	struct hdac_ext_bus *ebus = pci_get_drvdata(pci);
 	struct skl *skl  = ebus_to_skl(ebus);
 	struct hdac_bus *bus = ebus_to_hbus(ebus);
+	struct hdac_ext_link *hlink = NULL;
 	int ret;
 
 	/* Turned OFF in HDMI codec driver after codec reconfiguration */
@@ -276,8 +282,29 @@ static int skl_resume(struct device *dev)
 		ret = pci_enable_device(pci);
 		snd_hdac_ext_bus_link_power_up_all(ebus);
 		disable_irq_wake(bus->irq);
+		/*
+		 * turn On the links which are On before active suspend
+		 * and start the CORB/RIRB DMA if On before
+		 * active suspend.
+		 */
+		list_for_each_entry(hlink, &ebus->hlink_list, list) {
+			if (hlink->ref_count)
+				snd_hdac_ext_bus_link_power_up(hlink);
+		}
+
+		if (ebus->cmd_dma_state)
+			snd_hdac_bus_init_cmd_io(&ebus->bus);
 	} else {
 		ret = _skl_resume(ebus);
+
+		/* turn off the links which are off before suspend */
+		list_for_each_entry(hlink, &ebus->hlink_list, list) {
+			if (!hlink->ref_count)
+				snd_hdac_ext_bus_link_power_down(hlink);
+		}
+
+		if (!ebus->cmd_dma_state)
+			snd_hdac_bus_stop_cmd_io(&ebus->bus);
 	}
 
 	return ret;
@@ -613,6 +640,7 @@ static int skl_probe(struct pci_dev *pci,
 	struct skl *skl;
 	struct hdac_ext_bus *ebus = NULL;
 	struct hdac_bus *bus = NULL;
+	struct hdac_ext_link *hlink = NULL;
 	int err;
 
 	/* we use ext core ops, so provide NULL for ops here */
@@ -679,6 +707,12 @@ static int skl_probe(struct pci_dev *pci,
 		}
 	}
 
+	/*
+	 * we are done probling so decrement link counts
+	 */
+	list_for_each_entry(hlink, &ebus->hlink_list, list)
+		snd_hdac_ext_bus_link_put(ebus, hlink);
+
 	/*configure PM */
 	pm_runtime_put_noidle(bus->dev);
 	pm_runtime_allow(bus->dev);
Signature · 1 line
2.8.1
author
#7 lore raw

PATCH v3 3/3 ASoC: hdac_hdmi: add link management

In reply to Vinod Koul

Manage the hda idisp link using shiny new link APIs. We need to keep link On while we probe and also hold the reference in runtime resume and drop in suspend

---
 sound/soc/codecs/hdac_hdmi.c | 32 ++++++++++++++++++++++++++++++--
 1 file changed, 30 insertions(+), 2 deletions(-)
sound/soc/codecs/hdac_hdmi.c +30 -2
index aaa038ffc8a5..13002f33384e 100644
@@ -1378,10 +1378,18 @@ static int hdmi_codec_probe(struct snd_soc_codec *codec)
 	struct snd_soc_dapm_context *dapm =
 		snd_soc_component_get_dapm(&codec->component);
 	struct hdac_hdmi_pin *pin;
+	struct hdac_ext_link *hlink = NULL;
 	int ret;
 
 	edev->scodec = codec;
 
+	/*
+	 * hold the ref while we probe, also no need to drop the ref on
+	 * exit, we call pm_runtime_suspend() so that will do for us
+	 */
+	hlink = snd_hdac_ext_bus_get_link(edev->ebus, dev_name(&edev->hdac.dev));
+	snd_hdac_ext_bus_link_get(edev->ebus, hlink);
+
 	ret = create_fill_widget_route_map(dapm);
 	if (ret < 0)
 		return ret;
@@ -1480,9 +1488,14 @@ static int hdac_hdmi_dev_probe(struct hdac_ext_device *edev)
 	struct hdac_device *codec = &edev->hdac;
 	struct hdac_hdmi_priv *hdmi_priv;
 	struct snd_soc_dai_driver *hdmi_dais = NULL;
+	struct hdac_ext_link *hlink = NULL;
 	int num_dais = 0;
 	int ret = 0;
 
+	/* hold the ref while we probe */
+	hlink = snd_hdac_ext_bus_get_link(edev->ebus, dev_name(&edev->hdac.dev));
+	snd_hdac_ext_bus_link_get(edev->ebus, hlink);
+
 	hdmi_priv = devm_kzalloc(&codec->dev, sizeof(*hdmi_priv), GFP_KERNEL);
 	if (hdmi_priv == NULL)
 		return -ENOMEM;
@@ -1516,8 +1529,12 @@ static int hdac_hdmi_dev_probe(struct hdac_ext_device *edev)
 	}
 
 	/* ASoC specific initialization */
-	return snd_soc_register_codec(&codec->dev, &hdmi_hda_codec,
-			hdmi_dais, num_dais);
+	ret = snd_soc_register_codec(&codec->dev, &hdmi_hda_codec,
+					hdmi_dais, num_dais);
+
+	snd_hdac_ext_bus_link_put(edev->ebus, hlink);
+
+	return ret;
 }
 
 static int hdac_hdmi_dev_remove(struct hdac_ext_device *edev)
@@ -1556,6 +1573,9 @@ static int hdac_hdmi_runtime_suspend(struct device *dev)
 	struct hdac_ext_device *edev = to_hda_ext_device(dev);
 	struct hdac_device *hdac = &edev->hdac;
 	struct hdac_bus *bus = hdac->bus;
+	unsigned long timeout;
+	struct hdac_ext_bus *ebus = hbus_to_ebus(bus);
+	struct hdac_ext_link *hlink = NULL;
 	int err;
 
 	dev_dbg(dev, "Enter: %s\n", __func__);
@@ -1579,6 +1599,9 @@ static int hdac_hdmi_runtime_suspend(struct device *dev)
 		return err;
 	}
 
+	hlink = snd_hdac_ext_bus_get_link(ebus, dev_name(dev));
+	snd_hdac_ext_bus_link_put(ebus, hlink);
+
 	return 0;
 }
 
@@ -1587,6 +1610,8 @@ static int hdac_hdmi_runtime_resume(struct device *dev)
 	struct hdac_ext_device *edev = to_hda_ext_device(dev);
 	struct hdac_device *hdac = &edev->hdac;
 	struct hdac_bus *bus = hdac->bus;
+	struct hdac_ext_bus *ebus = hbus_to_ebus(bus);
+	struct hdac_ext_link *hlink = NULL;
 	int err;
 
 	dev_dbg(dev, "Enter: %s\n", __func__);
@@ -1595,6 +1620,9 @@ static int hdac_hdmi_runtime_resume(struct device *dev)
 	if (!bus)
 		return 0;
 
+	hlink = snd_hdac_ext_bus_get_link(ebus, dev_name(dev));
+	snd_hdac_ext_bus_link_get(ebus, hlink);
+
 	err = snd_hdac_display_power(bus, true);
 	if (err < 0) {
 		dev_err(bus->dev, "Cannot turn on display power on i915\n");
Signature · 1 line
1.9.1