Skip to contentSkip to conversation

Patch "spi: spi-ti-qspi: Handle truncated frames properly" has been added to the 4.5-stable tree

PATCH [email protected] 1 participant 1 message May 15, 2016

Subsystems (2)
lore
Share & tools
lore

[email protected]

author maintainer Applied
#0 lore raw

This is a note to let you know that I've just added the patch titled

spi: spi-ti-qspi: Handle truncated frames properly

to the 4.5-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
spi-spi-ti-qspi-handle-truncated-frames-properly.patch
and it can be found in the queue-4.5 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

Quoted 1 line

From 1ff7760ff66b98ef244bf0e5e2bd5310651205ad Mon Sep 17 00:00:00 2001

From: Ben Hutchings <[email protected]>
Date: Tue, 12 Apr 2016 12:58:14 +0100
Subject: spi: spi-ti-qspi: Handle truncated frames properly

From: Ben Hutchings <[email protected]>

commit 1ff7760ff66b98ef244bf0e5e2bd5310651205ad upstream.

We clamp frame_len_words to a maximum of 4096, but do not actually limit the number of words written or read through the DATA registers or the length added to spi_message::actual_length. This results in silent data corruption for commands longer than this maximum.

Recalculate the length of each transfer, taking frame_len_words into account. Use this length in qspi_{read,write}_msg(), and to increment spi_message::actual_length.

---
 drivers/spi/spi-ti-qspi.c |   32 ++++++++++++++++++++------------
 1 file changed, 20 insertions(+), 12 deletions(-)
drivers/spi/spi-ti-qspi.c +20 -12
@@ -225,16 +225,16 @@ static inline int ti_qspi_poll_wc(struct
 	return  -ETIMEDOUT;
 }
 
-static int qspi_write_msg(struct ti_qspi *qspi, struct spi_transfer *t)
+static int qspi_write_msg(struct ti_qspi *qspi, struct spi_transfer *t,
+			  int count)
 {
-	int wlen, count, xfer_len;
+	int wlen, xfer_len;
 	unsigned int cmd;
 	const u8 *txbuf;
 	u32 data;
 
 	txbuf = t->tx_buf;
 	cmd = qspi->cmd | QSPI_WR_SNGL;
-	count = t->len;
 	wlen = t->bits_per_word >> 3;	/* in bytes */
 	xfer_len = wlen;
 
@@ -294,9 +294,10 @@ static int qspi_write_msg(struct ti_qspi
 	return 0;
 }
 
-static int qspi_read_msg(struct ti_qspi *qspi, struct spi_transfer *t)
+static int qspi_read_msg(struct ti_qspi *qspi, struct spi_transfer *t,
+			 int count)
 {
-	int wlen, count;
+	int wlen;
 	unsigned int cmd;
 	u8 *rxbuf;
 
@@ -313,7 +314,6 @@ static int qspi_read_msg(struct ti_qspi
 		cmd |= QSPI_RD_SNGL;
 		break;
 	}
-	count = t->len;
 	wlen = t->bits_per_word >> 3;	/* in bytes */
 
 	while (count) {
@@ -344,12 +344,13 @@ static int qspi_read_msg(struct ti_qspi
 	return 0;
 }
 
-static int qspi_transfer_msg(struct ti_qspi *qspi, struct spi_transfer *t)
+static int qspi_transfer_msg(struct ti_qspi *qspi, struct spi_transfer *t,
+			     int count)
 {
 	int ret;
 
 	if (t->tx_buf) {
-		ret = qspi_write_msg(qspi, t);
+		ret = qspi_write_msg(qspi, t, count);
 		if (ret) {
 			dev_dbg(qspi->dev, "Error while writing\n");
 			return ret;
@@ -357,7 +358,7 @@ static int qspi_transfer_msg(struct ti_q
 	}
 
 	if (t->rx_buf) {
-		ret = qspi_read_msg(qspi, t);
+		ret = qspi_read_msg(qspi, t, count);
 		if (ret) {
 			dev_dbg(qspi->dev, "Error while reading\n");
 			return ret;
@@ -374,7 +375,8 @@ static int ti_qspi_start_transfer_one(st
 	struct spi_device *spi = m->spi;
 	struct spi_transfer *t;
 	int status = 0, ret;
-	unsigned int frame_len_words;
+	unsigned int frame_len_words, transfer_len_words;
+	int wlen;
 
 	/* setup device control reg */
 	qspi->dc = 0;
@@ -404,14 +406,20 @@ static int ti_qspi_start_transfer_one(st
 		qspi->cmd = ((qspi->cmd & ~QSPI_WLEN_MASK) |
 			     QSPI_WLEN(t->bits_per_word));
 
-		ret = qspi_transfer_msg(qspi, t);
+		wlen = t->bits_per_word >> 3;
+		transfer_len_words = min(t->len / wlen, frame_len_words);
+
+		ret = qspi_transfer_msg(qspi, t, transfer_len_words * wlen);
 		if (ret) {
 			dev_dbg(qspi->dev, "transfer message failed\n");
 			mutex_unlock(&qspi->list_lock);
 			return -EINVAL;
 		}
 
-		m->actual_length += t->len;
+		m->actual_length += transfer_len_words * wlen;
+		frame_len_words -= transfer_len_words;
+		if (frame_len_words == 0)
+			break;
 	}
 
 	mutex_unlock(&qspi->list_lock);

Patches currently in stable-queue which might be from [email protected] are

queue-4.5/spi-spi-ti-qspi-handle-truncated-frames-properly.patch queue-4.5/spi-spi-ti-qspi-fix-flen-and-wlen-settings-if-bits_per_word-is-overridden.patch