Add USB typeC based DP support for BXT platform
Subsystems (2)
v5 cover Add USB typeC based DP support for BXT platform
This patch series adds upfront link training support to enable USB type C based DP on BXT platform.
To support USB type C alternate DP mode, the display driver needs to know the number of lanes required by the DP panel as well as number of lanes that can be supported by the type-C cable. Sometimes, the type-C cable may limit the bandwidth even if Panel can support more lanes.
The goal is to find out the number of lanes which can be supported using a particular cable so that we can cap 'max_available_lanes' to that number during modeset.
Patch 1-3/5 : Refactor ddi_pll code so that upfront link
training does not need crtc_state.
Patch 4/5 : Split ddi_pll_select to be able to calculate
pll config for DP during upfront link train.
Patch 5/5 : Upfront implementation for BXT platform.
Changes from v4:
* Don't use crtc_state in upfront link train
* Use separate variables to track max lane count
and link bw obtained through upfront link train
Changes from v3:
* Used an earlier patch from Ander that splits ddi_pll_select to be able to use it from upfront link train logic.
Changes from v2:
* Rebased on top of intel_dpll_mgr.c code.
* Use drm_atomic_commit instead of atomic_helper_dpms, since the later uses crtc->acquire_ctx used also in legacy paths.
* Using a drm_atomic_state helps in using the shared_dpll APIs as is, thus keeping the upfront code away from changing pll internals directly.
* Fixed locking/retry/backoff logic in upfront according to atomic implementation.
Changes from v1:
* Using atomic_helper_dpms() to do DPMS off for upfront link training, instead of using load detect functions.
* Made intel_get_shared_dpll handle non-atomic paths by duplicating the required shared_dpll_config and then working on top of it. This helps in upfront link train code not directly touch the 'pll/pll->config' internals.
* Fixed the link_bw update logic in intel_dp_get_link_retry_params() for non-HBR2 panels.
* As per comments on earlier version, merged few patches (that added new functions) with the upfront link train patch, to facilitate easy review.
Link for v4: https://patchwork.freedesktop.org/patch/81656/ Link for v3: https://patchwork.freedesktop.org/patch/79792/ Link for v2: https://patchwork.freedesktop.org/patch/72207/ Link for v1: https://patchwork.freedesktop.org/patch/67784/ Link for RFCv2: https://patchwork.freedesktop.org/patch/61776/ Link for RFCv1: https://patchwork.freedesktop.org/patch/59589/
Ander Conselvan de Oliveira (3):
drm/i915: Don't pass crtc_state to intel_dp_set_link_params() drm/i915: Remove ddi_pll_sel from intel_crtc_state drm/i915: Split intel_ddi_pre_enable() into DP and HDMI versions
Durgadoss R (2):
drm/i915: Split bxt_ddi_pll_select()
drm/i915/dp: Enable Upfront link training for typeC DP support on BXT
drivers/gpu/drm/i915/intel_ddi.c | 163 ++++++++++++++++++++++------- drivers/gpu/drm/i915/intel_display.c | 43 ++------ drivers/gpu/drm/i915/intel_dp.c | 192 ++++++++++++++++++++++++++++++++-- drivers/gpu/drm/i915/intel_dp_mst.c | 7 +- drivers/gpu/drm/i915/intel_dpll_mgr.c | 192 ++++++++++++++++++---------------- drivers/gpu/drm/i915/intel_dpll_mgr.h | 3 + drivers/gpu/drm/i915/intel_drv.h | 16 ++- 7 files changed, 441 insertions(+), 175 deletions(-)
Signature · 6 lines
1.9.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v5 1/5 drm/i915: Don't pass crtc_state to intel_dp_set_link_params()
From: Ander Conselvan de Oliveira <[email protected]>
Decouple intel_dp_set_link_params() from struct intel_crtc_state. This will be useful for implementing DP upfront link training.
--- drivers/gpu/drm/i915/intel_ddi.c | 3 ++- drivers/gpu/drm/i915/intel_dp.c | 9 +++++---- drivers/gpu/drm/i915/intel_dp_mst.c | 4 +++- drivers/gpu/drm/i915/intel_drv.h | 2 +- 4 files changed, 11 insertions(+), 7 deletions(-)
drivers/gpu/drm/i915/intel_ddi.c +2 -1
@@ -1619,7 +1619,8 @@ static void intel_ddi_pre_enable(struct intel_encoder *intel_encoder)if (type ==INTEL_OUTPUT_DISPLAYPORT || type ==INTEL_OUTPUT_EDP ) {struct intel_dp *intel_dp =enc_to_intel_dp (encoder); -intel_dp_set_link_params (intel_dp, crtc->config); +intel_dp_set_link_params (intel_dp, crtc->config->port_clock, + crtc->config->lane_count);intel_ddi_init_dp_buf_reg (intel_encoder);
drivers/gpu/drm/i915/intel_dp.c +5 -4
@@ -1584,10 +1584,10 @@ found: }void intel_dp_set_link_params (struct intel_dp *intel_dp, -const struct intel_crtc_state *pipe_config) +int link_rate,uint8_t lane_count) { - intel_dp->link_rate = pipe_config->port_clock; - intel_dp->lane_count = pipe_config->lane_count; + intel_dp->link_rate = link_rate; + intel_dp->lane_count = lane_count; }static void intel_dp_prepare (struct intel_encoder *encoder)
@@ -1599,7 +1599,8 @@ static void intel_dp_prepare(struct intel_encoder *encoder)struct intel_crtc *crtc =to_intel_crtc (encoder->base.crtc);const struct drm_display_mode *adjusted_mode = &crtc->config->base.adjusted_mode; -intel_dp_set_link_params (intel_dp, crtc->config); +intel_dp_set_link_params (intel_dp, crtc->config->port_clock, + crtc->config->lane_count);/* * There are four kinds of DP registers:
drivers/gpu/drm/i915/intel_dp_mst.c +3 -1
@@ -175,7 +175,9 @@ static void intel_mst_pre_enable_dp(struct intel_encoder *encoder)intel_ddi_clk_select (&intel_dig_port->base, intel_crtc->config); -intel_dp_set_link_params (intel_dp, intel_crtc->config); +intel_dp_set_link_params (intel_dp, + intel_crtc->config->port_clock, + intel_crtc->config->lane_count);intel_ddi_init_dp_buf_reg (&intel_dig_port->base);
drivers/gpu/drm/i915/intel_drv.h +1 -1
@@ -1291,7 +1291,7 @@ void intel_dp_init(struct drm_device *dev, i915_reg_t output_reg, enum port portbool intel_dp_init_connector (struct intel_digital_port *intel_dig_port,struct intel_connector *intel_connector);void intel_dp_set_link_params (struct intel_dp *intel_dp, -const struct intel_crtc_state *pipe_config); +int link_rate,uint8_t lane_count);void intel_dp_start_link_train (struct intel_dp *intel_dp);void intel_dp_stop_link_train (struct intel_dp *intel_dp);void intel_dp_sink_dpms (struct intel_dp *intel_dp,int mode);
Signature · 6 lines
1.9.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v5 2/5 drm/i915: Remove ddi_pll_sel from intel_crtc_state
In reply to Durgadoss RFrom: Ander Conselvan de Oliveira <[email protected]>
The value of ddi_pll_sel is derived from the selection of shared dpll, so just calculate the final value when necessary.
--- drivers/gpu/drm/i915/intel_ddi.c | 33 ++++++++++++++++++++++----- drivers/gpu/drm/i915/intel_display.c | 43 +++++++---------------------------- drivers/gpu/drm/i915/intel_dp_mst.c | 3 ++- drivers/gpu/drm/i915/intel_dpll_mgr.c | 27 ---------------------- drivers/gpu/drm/i915/intel_drv.h | 2 +- 5 files changed, 38 insertions(+), 70 deletions(-)
drivers/gpu/drm/i915/intel_ddi.c +27 -6
@@ -1567,14 +1567,36 @@ uint32_t ddi_signal_levels(struct intel_dp *intel_dp)return DDI_BUF_TRANS_SELECT (level); } +static uint32_t hsw_pll_to_ddi_pll_sel (struct intel_shared_dpll *pll) +{ +switch (pll->id) { +case DPLL_ID_WRPLL1 : +return PORT_CLK_SEL_WRPLL1 ; +case DPLL_ID_WRPLL2 : +return PORT_CLK_SEL_WRPLL2 ; +case DPLL_ID_SPLL : +return PORT_CLK_SEL_SPLL ; +case DPLL_ID_LCPLL_810 : +return PORT_CLK_SEL_LCPLL_810 ; +case DPLL_ID_LCPLL_1350 : +return PORT_CLK_SEL_LCPLL_1350 ; +case DPLL_ID_LCPLL_2700 : +return PORT_CLK_SEL_LCPLL_2700 ; +default : +return PORT_CLK_SEL_NONE ; + } +} +void intel_ddi_clk_select (struct intel_encoder *encoder, -const struct intel_crtc_state *pipe_config) +struct intel_shared_dpll *pll) {struct drm_i915_private *dev_priv =to_i915 (encoder->base.dev);enum port port =intel_ddi_get_encoder_port (encoder); +if (WARN_ON (!pll)) +return ; +if (IS_SKYLAKE (dev_priv) ||IS_KABYLAKE (dev_priv)) { -uint32_t dpll = pipe_config->ddi_pll_sel;uint32_t val;/* DDI -> PLL mapping */
@@ -1582,14 +1604,13 @@ void intel_ddi_clk_select(struct intel_encoder *encoder, val &= ~(DPLL_CTRL2_DDI_CLK_OFF (port) |DPLL_CTRL2_DDI_CLK_SEL_MASK (port)); - val |= (DPLL_CTRL2_DDI_CLK_SEL (dpll, port) | + val |= (DPLL_CTRL2_DDI_CLK_SEL (pll->id, port) |DPLL_CTRL2_DDI_SEL_OVERRIDE (port));I915_WRITE (DPLL_CTRL2 , val); }else if (INTEL_INFO (dev_priv)->gen <9 ) { -WARN_ON (pipe_config->ddi_pll_sel ==PORT_CLK_SEL_NONE ); -I915_WRITE (PORT_CLK_SEL (port), pipe_config->ddi_pll_sel); +I915_WRITE (PORT_CLK_SEL (port),hsw_pll_to_ddi_pll_sel (pll)); } }
@@ -1614,7 +1635,7 @@ static void intel_ddi_pre_enable(struct intel_encoder *intel_encoder)intel_edp_panel_on (intel_dp); } -intel_ddi_clk_select (intel_encoder, crtc->config); +intel_ddi_clk_select (intel_encoder, crtc->config->shared_dpll);if (type ==INTEL_OUTPUT_DISPLAYPORT || type ==INTEL_OUTPUT_EDP ) {struct intel_dp *intel_dp =enc_to_intel_dp (encoder);
drivers/gpu/drm/i915/intel_display.c +8 -35
119 lines not on this page · raw message
drivers/gpu/drm/i915/intel_dp_mst.c +2 -1
@@ -173,7 +173,8 @@ static void intel_mst_pre_enable_dp(struct intel_encoder *encoder)if (intel_dp->active_mst_links ==0 ) {intel_prepare_ddi_buffer (&intel_dig_port->base); -intel_ddi_clk_select (&intel_dig_port->base, intel_crtc->config); +intel_ddi_clk_select (&intel_dig_port->base, + intel_crtc->config->shared_dpll); intel_dp_set_link_params(intel_dp, intel_crtc->config->port_clock,
drivers/gpu/drm/i915/intel_dpll_mgr.c +0 -27
@@ -449,26 +449,6 @@ static bool hsw_ddi_spll_get_hw_state(struct drm_i915_private *dev_priv,return val &SPLL_PLL_ENABLE ; } -static uint32_t hsw_pll_to_ddi_pll_sel (struct intel_shared_dpll *pll) -{ -switch (pll->id) { -case DPLL_ID_WRPLL1 : -return PORT_CLK_SEL_WRPLL1 ; -case DPLL_ID_WRPLL2 : -return PORT_CLK_SEL_WRPLL2 ; -case DPLL_ID_SPLL : -return PORT_CLK_SEL_SPLL ; -case DPLL_ID_LCPLL_810 : -return PORT_CLK_SEL_LCPLL_810 ; -case DPLL_ID_LCPLL_1350 : -return PORT_CLK_SEL_LCPLL_1350 ; -case DPLL_ID_LCPLL_2700 : -return PORT_CLK_SEL_LCPLL_2700 ; -default : -return PORT_CLK_SEL_NONE ; - } -} -#define LC_FREQ 2700#define LC_FREQ_2K U64_C(LC_FREQ * 2000)
@@ -748,8 +728,6 @@ hsw_get_dpll(struct intel_crtc *crtc, struct intel_crtc_state *crtc_state,if (!pll)return NULL ; - crtc_state->ddi_pll_sel =hsw_pll_to_ddi_pll_sel (pll); -intel_reference_shared_dpll (pll, crtc_state);return pll;
@@ -1270,8 +1248,6 @@ skl_get_dpll(struct intel_crtc *crtc, struct intel_crtc_state *crtc_state,if (!pll)return NULL ; - crtc_state->ddi_pll_sel = pll->id; -intel_reference_shared_dpll (pll, crtc_state);return pll;
@@ -1618,9 +1594,6 @@ bxt_get_dpll(struct intel_crtc *crtc, struct intel_crtc_state *crtc_state,intel_reference_shared_dpll (pll, crtc_state); -/* shared DPLL id 0 is DPLL A */ - crtc_state->ddi_pll_sel = pll->id; -return pll; }
drivers/gpu/drm/i915/intel_drv.h +1 -1
@@ -1059,7 +1059,7 @@ void intel_crt_init(struct drm_device *dev);/* intel_ddi.c */ void intel_ddi_clk_select (struct intel_encoder *encoder, -const struct intel_crtc_state *pipe_config); +struct intel_shared_dpll *pll);void intel_prepare_ddi_buffer (struct intel_encoder *encoder);void hsw_fdi_link_train (struct drm_crtc *crtc);void intel_ddi_init (struct drm_device *dev,enum port port);
Signature · 6 lines
1.9.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v5 3/5 drm/i915: Split intel_ddi_pre_enable() into DP and HDMI versions
In reply to Durgadoss RFrom: Ander Conselvan de Oliveira <[email protected]>
Split intel_ddi_pre_enable() into encoder type specific versions that don't depend on crtc_state. The necessary parameters are passed as function arguments. This split will be necessary for implementing DP upfront link training.
--- drivers/gpu/drm/i915/intel_ddi.c | 75 +++++++++++++++++++++++----------------- 1 file changed, 44 insertions(+), 31 deletions(-)
drivers/gpu/drm/i915/intel_ddi.c +44 -31
@@ -1614,48 +1614,61 @@ void intel_ddi_clk_select(struct intel_encoder *encoder, } } -static void intel_ddi_pre_enable (struct intel_encoder *intel_encoder) +static void intel_ddi_pre_enable_dp (struct intel_encoder *encoder, +int link_rate,uint32_t lane_count, +struct intel_shared_dpll *pll) { -struct drm_encoder *encoder = &intel_encoder->base; -struct drm_i915_private *dev_priv =to_i915 (encoder->dev); -struct intel_crtc *crtc =to_intel_crtc (encoder->crtc); -enum port port =intel_ddi_get_encoder_port (intel_encoder); -int type = intel_encoder->type; +struct intel_dp *intel_dp =enc_to_intel_dp (&encoder->base); +struct drm_i915_private *dev_priv =to_i915 (encoder->base.dev); +enum port port =intel_ddi_get_encoder_port (encoder); -if (type ==INTEL_OUTPUT_HDMI ) { -struct intel_hdmi *intel_hdmi =enc_to_intel_hdmi (encoder); +intel_prepare_ddi_buffer (encoder); -intel_dp_dual_mode_set_tmds_output (intel_hdmi, true); - } +if (encoder->type ==INTEL_OUTPUT_EDP ) +intel_edp_panel_on (intel_dp); -intel_prepare_ddi_buffer (intel_encoder); +intel_ddi_clk_select (encoder, pll); -if (type ==INTEL_OUTPUT_EDP ) { -struct intel_dp *intel_dp =enc_to_intel_dp (encoder); -intel_edp_panel_on (intel_dp); - } +intel_dp_set_link_params (intel_dp, link_rate, lane_count); +intel_ddi_init_dp_buf_reg (encoder); -intel_ddi_clk_select (intel_encoder, crtc->config->shared_dpll); +intel_dp_sink_dpms (intel_dp,DRM_MODE_DPMS_ON ); +intel_dp_start_link_train (intel_dp); +if (port !=PORT_A ||INTEL_INFO (dev_priv)->gen >=9 ) +intel_dp_stop_link_train (intel_dp); +} -if (type ==INTEL_OUTPUT_DISPLAYPORT || type ==INTEL_OUTPUT_EDP ) { -struct intel_dp *intel_dp =enc_to_intel_dp (encoder); +static void intel_ddi_pre_enable_hdmi (struct intel_encoder *encoder, +bool has_hdmi_sink, +struct drm_display_mode *adjusted_mode, +struct intel_shared_dpll *pll) +{ +struct intel_hdmi *intel_hdmi =enc_to_intel_hdmi (&encoder->base); +struct drm_encoder *drm_encoder = &encoder->base; -intel_dp_set_link_params (intel_dp, crtc->config->port_clock, - crtc->config->lane_count); +intel_dp_dual_mode_set_tmds_output (intel_hdmi, true); +intel_prepare_ddi_buffer (encoder); +intel_ddi_clk_select (encoder, pll); + intel_hdmi->set_infoframes (drm_encoder, has_hdmi_sink, adjusted_mode); +} -intel_ddi_init_dp_buf_reg (intel_encoder); +static void intel_ddi_pre_enable (struct intel_encoder *intel_encoder) +{ +struct drm_encoder *encoder = &intel_encoder->base; +struct intel_crtc *crtc =to_intel_crtc (encoder->crtc); +int type = intel_encoder->type; -intel_dp_sink_dpms (intel_dp,DRM_MODE_DPMS_ON ); -intel_dp_start_link_train (intel_dp); -if (port !=PORT_A ||INTEL_INFO (dev_priv)->gen >=9 ) -intel_dp_stop_link_train (intel_dp); - }else if (type ==INTEL_OUTPUT_HDMI ) { -struct intel_hdmi *intel_hdmi =enc_to_intel_hdmi (encoder); +if (type ==INTEL_OUTPUT_DISPLAYPORT || type ==INTEL_OUTPUT_EDP ) +intel_ddi_pre_enable_dp (intel_encoder, + crtc->config->port_clock, + crtc->config->lane_count, + crtc->config->shared_dpll); - intel_hdmi->set_infoframes (encoder, - crtc->config->has_hdmi_sink, - &crtc->config->base.adjusted_mode); - } +if (type ==INTEL_OUTPUT_HDMI ) +intel_ddi_pre_enable_hdmi (intel_encoder, + crtc->config->has_hdmi_sink, + &crtc->config->base.adjusted_mode, + crtc->config->shared_dpll); }static void intel_ddi_post_disable (struct intel_encoder *intel_encoder)
Signature · 6 lines
1.9.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v2 4/5 drm/i915: Split bxt_ddi_pll_select()
In reply to Durgadoss RSplit out of bxt_ddi_pll_select() the logic that calculates the pll dividers and dpll_hw_state into a new function that doesn't depend on crtc state. This will be used for enabling the port pll when doing upfront link training.
v2:
* Refactored code so that bxt_clk_div need not be exported (Durga) v1:
* Rebased on top of intel_dpll_mgr.c (Durga)
* Initial version from Ander on top of intel_ddi.c
--- drivers/gpu/drm/i915/intel_dpll_mgr.c | 165 +++++++++++++++++++++------------- drivers/gpu/drm/i915/intel_dpll_mgr.h | 3 + 2 files changed, 104 insertions(+), 64 deletions(-)
drivers/gpu/drm/i915/intel_dpll_mgr.c +101 -64
@@ -1456,6 +1456,8 @@ struct bxt_clk_div {uint32_t m2_frac;bool m2_frac_en;uint32_t n; + +int vco; };/* pre-calculated values for DP linkrates */
@@ -1469,57 +1471,60 @@ static const struct bxt_clk_div bxt_dp_clk_val[] = { {432000, 3, 1, 32, 1677722, 1, 1} }; -static struct intel_shared_dpll * -bxt_get_dpll (struct intel_crtc *crtc,struct intel_crtc_state *crtc_state, -struct intel_encoder *encoder) +static bool +bxt_ddi_hdmi_pll_dividers (struct intel_crtc *intel_crtc, +struct intel_crtc_state *crtc_state,int clock, +struct bxt_clk_div *clk_div) { -struct drm_i915_private *dev_priv =to_i915 (crtc->base.dev); -struct intel_shared_dpll *pll; -enum intel_dpll_id i; -struct intel_digital_port *intel_dig_port; -struct bxt_clk_div clk_div = {0 }; -int vco =0 ; -uint32_t prop_coef, int_coef, gain_ctl, targ_cnt; -uint32_t lanestagger; -int clock = crtc_state->port_clock; +struct dpll best_clock; -if (encoder->type ==INTEL_OUTPUT_HDMI ) { -struct dpll best_clock; +/* Calculate HDMI div */ +/* +* FIXME: tie the following calculation into +* i9xx_crtc_compute_clock +*/ +if (!bxt_find_best_dpll (crtc_state, clock, &best_clock)) { +DRM_DEBUG_DRIVER ("no PLL dividers found for clock %d pipe %c\n" , + clock,pipe_name (intel_crtc->pipe)); +return false; + } -/* Calculate HDMI div */ -/* -* FIXME: tie the following calculation into -* i9xx_crtc_compute_clock -*/ -if (!bxt_find_best_dpll (crtc_state, clock, &best_clock)) { -DRM_DEBUG_DRIVER ("no PLL dividers found for clock %d pipe %c\n" , - clock,pipe_name (crtc->pipe)); -return NULL ; - } + clk_div->p1 = best_clock.p1; + clk_div->p2 = best_clock.p2; +WARN_ON (best_clock.m1 !=2 ); + clk_div->n = best_clock.n; + clk_div->m2_int = best_clock.m2 >>22 ; + clk_div->m2_frac = best_clock.m2 & ((1 <<22 ) -1 ); + clk_div->m2_frac_en = clk_div->m2_frac !=0 ; - clk_div.p1 = best_clock.p1; - clk_div.p2 = best_clock.p2; -WARN_ON (best_clock.m1 !=2 ); - clk_div.n = best_clock.n; - clk_div.m2_int = best_clock.m2 >>22 ; - clk_div.m2_frac = best_clock.m2 & ((1 <<22 ) -1 ); - clk_div.m2_frac_en = clk_div.m2_frac !=0 ; + clk_div->vco = best_clock.vco; - vco = best_clock.vco; - }else if (encoder->type ==INTEL_OUTPUT_DISPLAYPORT || - encoder->type ==INTEL_OUTPUT_EDP ) { -int i; +return true; +} - clk_div = bxt_dp_clk_val[0 ]; -for (i =0 ; i <ARRAY_SIZE (bxt_dp_clk_val); ++i) { -if (bxt_dp_clk_val[i].clock == clock) { - clk_div = bxt_dp_clk_val[i]; -break ; - } +static void bxt_ddi_dp_pll_dividers (int clock,struct bxt_clk_div *clk_div) +{ +int i; + + *clk_div = bxt_dp_clk_val[0 ]; +for (i =0 ; i <ARRAY_SIZE (bxt_dp_clk_val); ++i) { +if (bxt_dp_clk_val[i].clock == clock) { + *clk_div = bxt_dp_clk_val[i]; +break ; } - vco = clock *10 /2 * clk_div.p1 * clk_div.p2; } + clk_div->vco = clock *10 /2 * clk_div->p1 * clk_div->p2; +} + +static bool bxt_ddi_set_dpll_hw_state (int clock, +struct bxt_clk_div *clk_div, +struct intel_dpll_hw_state *dpll_hw_state) +{ +int vco = clk_div->vco; +uint32_t prop_coef, int_coef, gain_ctl, targ_cnt; +uint32_t lanestagger; +if (vco >=6200000 && vco <=6700000 ) { prop_coef =4 ; int_coef =9 ;
@@ -1538,12 +1543,9 @@ bxt_get_dpll(struct intel_crtc *crtc, struct intel_crtc_state *crtc_state, targ_cnt =9 ; }else {DRM_ERROR ("Invalid VCO\n" ); -return NULL ; +return false; } -memset (&crtc_state->dpll_hw_state,0 , -sizeof (crtc_state->dpll_hw_state)); -if (clock >270000 ) lanestagger =0x18 ;else if (clock >135000 )
@@ -1555,33 +1557,68 @@ bxt_get_dpll(struct intel_crtc *crtc, struct intel_crtc_state *crtc_state,else lanestagger =0x02 ; - crtc_state->dpll_hw_state.ebb0 = -PORT_PLL_P1 (clk_div.p1) |PORT_PLL_P2 (clk_div.p2); - crtc_state->dpll_hw_state.pll0 = clk_div.m2_int; - crtc_state->dpll_hw_state.pll1 =PORT_PLL_N (clk_div.n); - crtc_state->dpll_hw_state.pll2 = clk_div.m2_frac; + dpll_hw_state->ebb0 =PORT_PLL_P1 (clk_div->p1) |PORT_PLL_P2 (clk_div->p2); + dpll_hw_state->pll0 = clk_div->m2_int; + dpll_hw_state->pll1 =PORT_PLL_N (clk_div->n); + dpll_hw_state->pll2 = clk_div->m2_frac; -if (clk_div.m2_frac_en) - crtc_state->dpll_hw_state.pll3 = -PORT_PLL_M2_FRAC_ENABLE ; +if (clk_div->m2_frac_en) + dpll_hw_state->pll3 =PORT_PLL_M2_FRAC_ENABLE ; - crtc_state->dpll_hw_state.pll6 = - prop_coef |PORT_PLL_INT_COEFF (int_coef); - crtc_state->dpll_hw_state.pll6 |= -PORT_PLL_GAIN_CTL (gain_ctl); + dpll_hw_state->pll6 = prop_coef |PORT_PLL_INT_COEFF (int_coef); + dpll_hw_state->pll6 |=PORT_PLL_GAIN_CTL (gain_ctl); - crtc_state->dpll_hw_state.pll8 = targ_cnt; + dpll_hw_state->pll8 = targ_cnt; - crtc_state->dpll_hw_state.pll9 =5 <<PORT_PLL_LOCK_THRESHOLD_SHIFT ; + dpll_hw_state->pll9 =5 <<PORT_PLL_LOCK_THRESHOLD_SHIFT ; - crtc_state->dpll_hw_state.pll10 = + dpll_hw_state->pll10 =PORT_PLL_DCO_AMP (PORT_PLL_DCO_AMP_DEFAULT ) |PORT_PLL_DCO_AMP_OVR_EN_H ; - crtc_state->dpll_hw_state.ebb4 =PORT_PLL_10BIT_CLK_ENABLE ; + dpll_hw_state->ebb4 =PORT_PLL_10BIT_CLK_ENABLE ; + + dpll_hw_state->pcsdw12 =LANESTAGGER_STRAP_OVRD | lanestagger; + +return true; +} + +bool bxt_ddi_dp_set_dpll_hw_state (int clock, +struct intel_dpll_hw_state *dpll_hw_state) +{ +struct bxt_clk_div clk_div = {0 }; + +bxt_ddi_dp_pll_dividers (clock, &clk_div); + +return bxt_ddi_set_dpll_hw_state (clock, &clk_div, dpll_hw_state); +} + +static struct intel_shared_dpll * +bxt_get_dpll (struct intel_crtc *crtc, +struct intel_crtc_state *crtc_state, +struct intel_encoder *encoder) +{ +struct bxt_clk_div clk_div = {0 }; +struct intel_dpll_hw_state dpll_hw_state = {0 }; +struct drm_i915_private *dev_priv =to_i915 (crtc->base.dev); +struct intel_digital_port *intel_dig_port; +struct intel_shared_dpll *pll; +int i, clock = crtc_state->port_clock; + +if (encoder->type ==INTEL_OUTPUT_HDMI + && !bxt_ddi_hdmi_pll_dividers (crtc, crtc_state, + clock, &clk_div)) +return false; + +if ((encoder->type ==INTEL_OUTPUT_DISPLAYPORT || + encoder->type ==INTEL_OUTPUT_EDP ) && + !bxt_ddi_dp_set_dpll_hw_state (clock, &dpll_hw_state)) +return false; + +memset (&crtc_state->dpll_hw_state,0 , +sizeof (crtc_state->dpll_hw_state)); - crtc_state->dpll_hw_state.pcsdw12 = -LANESTAGGER_STRAP_OVRD | lanestagger; + crtc_state->dpll_hw_state = dpll_hw_state; intel_dig_port =enc_to_dig_port (&encoder->base);
drivers/gpu/drm/i915/intel_dpll_mgr.h +3 -0
@@ -160,5 +160,8 @@ void intel_disable_shared_dpll(struct intel_crtc *crtc);void intel_shared_dpll_commit (struct drm_atomic_state *state);void intel_shared_dpll_init (struct drm_device *dev); +/* BXT dpll related functions */ +bool bxt_ddi_dp_set_dpll_hw_state (int clock, +struct intel_dpll_hw_state *dpll_hw_state);#endif /* _INTEL_DPLL_MGR_H_ */
Signature · 6 lines
1.9.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v5 5/5 drm/i915/dp: Enable Upfront link training for typeC DP support on BXT
In reply to Durgadoss RTo support USB type C alternate DP mode, the display driver needs to know the number of lanes required by the DP panel as well as number of lanes that can be supported by the type-C cable. Sometimes, the type-C cable may limit the bandwidth even if Panel can support more lanes. To address these scenarios, the display driver will start link training with max lanes, and if that fails, the driver falls back to x2 lanes; and repeats this procedure for all bandwidth/lane configurations.
* Since link training is done before modeset only the port (and not pipe/planes) and its associated PLLs are enabled.
* On DP hotplug: Directly start link training on the DP encoder.
* On Connected boot scenarios: When booted with an LFP and a DP, typically, BIOS brings up DP. In these cases, we disable the crtc and then do upfront link training; and bring it back up.
* All local changes made for upfront link training are reset to their previous values once it is done; so that the subsequent modeset is not aware of these changes.
Changes since v4:
* Removed usage of crtc_state in upfront link training; Hence no need to find free crtc to do upfront now.
* Re-enable crtc if it was disabled for upfront.
* Use separate variables to track max lane count and link rate found by upfront, without modifying the original DPCD read from panel.
Changes since v3:
* Fixed a return value on BXT check
* Reworked on top of bxt_ddi_pll_select split from Ander
* Renamed from ddi_upfront to bxt_upfront since the upfront logic includes BXT specific functions for now.
Changes since v2:
* Rebased on top of latest dpll_mgr.c code and latest HPD related clean ups.
* Corrected return values from upfront (Ander)
* Corrected atomic locking for upfront in intel_dp.c (Ville) Changes since v1:
* all pll related functions inside ddi.c
--- drivers/gpu/drm/i915/intel_ddi.c | 58 +++++++++++++ drivers/gpu/drm/i915/intel_dp.c | 183 +++++++++++++++++++++++++++++++++++++-- drivers/gpu/drm/i915/intel_drv.h | 12 +++ 3 files changed, 247 insertions(+), 6 deletions(-)
drivers/gpu/drm/i915/intel_ddi.c +58 -0
@@ -2330,6 +2330,64 @@ intel_ddi_init_hdmi_connector(struct intel_digital_port *intel_dig_port)return connector; } +int intel_bxt_upfront_link_train (struct intel_dp *intel_dp, +int clock,uint8_t lane_count) +{ +struct intel_connector *connector = intel_dp->attached_connector; +struct intel_encoder *encoder = connector->encoder; +struct drm_i915_private *dev_priv =to_i915 (encoder->base.dev); +struct intel_shared_dpll *pll; +struct intel_shared_dpll_config tmp_pll_config; +struct intel_digital_port *dig_port =dp_to_dig_port (intel_dp); +enum intel_dpll_id dpll_id = (enum intel_dpll_id )dig_port->port; + +mutex_lock (&dev_priv->dpll_lock); +/* +* FIXME: Works only for BXT. +* Select the required PLL. This works for platforms where +* there is no shared DPLL. +*/ + pll = &dev_priv->shared_dplls[dpll_id]; +if (WARN_ON (pll->active_mask)) { +DRM_ERROR ("Shared DPLL already in use. active_mask:%x\n" , pll->active_mask); +mutex_unlock (&dev_priv->dpll_lock); +return -EINVAL ; + } + + tmp_pll_config = pll->config; + +DRM_DEBUG_KMS ("Upfront link train start : link_clock:%d lanes:%d\n" , + clock, lane_count); +do { +if (!bxt_ddi_dp_set_dpll_hw_state (clock, &pll->config.hw_state)) { +DRM_ERROR ("Could not setup DPLL\n" ); + goto exit_pll; + } + +/* Enable PLL followed by port */ + pll->funcs.enable (dev_priv, pll); +intel_ddi_pre_enable_dp (encoder, clock, lane_count, pll); + +if (intel_dp->train_set_valid) +intel_dp_set_upfront_params (intel_dp, clock, lane_count); + +/* Disable port followed by PLL for next retry/clean up */ +intel_ddi_post_disable (encoder); + pll->funcs.disable (dev_priv, pll); + + }while (!intel_dp->train_set_valid && +intel_dp_get_link_retry_params (intel_dp, &clock, &lane_count)); + +DRM_DEBUG_KMS ("Upfront link train %s: link_clock:%d lanes:%d\n" , + intel_dp->train_set_valid ?"Passed" :"Failed" , clock, lane_count); + +exit_pll: + pll->config = tmp_pll_config; +mutex_unlock (&dev_priv->dpll_lock); + +return intel_dp->train_set_valid ?0 :-1 ; +} +void intel_ddi_init (struct drm_device *dev,enum port port) {struct drm_i915_private *dev_priv = dev->dev_private;
drivers/gpu/drm/i915/intel_dp.c +177 -6
230 lines not on this page · raw message
drivers/gpu/drm/i915/intel_drv.h +12 -0
@@ -812,6 +812,12 @@ struct intel_dp {enum hdmi_force_audio force_audio;bool limited_color_range;bool color_range_auto; + +/* Upfront link train parameters */ +int max_link_bw_upfront; +uint8_t max_lanes_upfront; +bool upfront_done; +uint8_t dpcd[DP_RECEIVER_CAP_SIZE ];uint8_t psr_dpcd[EDP_PSR_RECEIVER_CAP_SIZE ];uint8_t downstream_ports[DP_MAX_DOWNSTREAM_PORTS ];
@@ -1086,6 +1092,8 @@ void intel_ddi_clock_get(struct intel_encoder *encoder, struct intel_crtc_state *pipe_config);void intel_ddi_set_vc_payload_alloc (struct drm_crtc *crtc,bool state);uint32_t ddi_signal_levels (struct intel_dp *intel_dp); +int intel_bxt_upfront_link_train (struct intel_dp *intel_dp, +int clock,uint8_t lane_count);/* intel_frontbuffer.c */ void intel_fb_obj_invalidate(struct drm_i915_gem_object *obj,
@@ -1292,6 +1300,10 @@ bool intel_dp_init_connector(struct intel_digital_port *intel_dig_port, struct intel_connector *intel_connector);void intel_dp_set_link_params (struct intel_dp *intel_dp,int link_rate,uint8_t lane_count); +void intel_dp_set_upfront_params (struct intel_dp *intel_dp, +int link_rate,uint8_t lane_count); +bool intel_dp_get_link_retry_params (struct intel_dp *intel_dp, +int *link_rate,uint8_t *lane_count);void intel_dp_start_link_train (struct intel_dp *intel_dp);void intel_dp_stop_link_train (struct intel_dp *intel_dp);void intel_dp_sink_dpms (struct intel_dp *intel_dp,int mode);
Signature · 6 lines
1.9.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCHv5 5/5] drm/i915/dp: Enable Upfront link training for typeC DP support on BXT
Quoted 107 lines · Durgadoss R
To support USB type C alternate DP mode, the display driver needs to know the number of lanes required by the DP panel as well as number of lanes that can be supported by the type-C cable. Sometimes, the type-C cable may limit the bandwidth even if Panel can support more lanes. To address these scenarios, the display driver will start link training with max lanes, and if that fails, the driver falls back to x2 lanes; and repeats this procedure for all bandwidth/lane configurations.
* Since link training is done before modeset only the port (and not pipe/planes) and its associated PLLs are enabled.
* On DP hotplug: Directly start link training on the DP encoder.
* On Connected boot scenarios: When booted with an LFP and a DP, typically, BIOS brings up DP. In these cases, we disable the crtc and then do upfront link training; and bring it back up.
* All local changes made for upfront link training are reset to their previous values once it is done; so that the subsequent modeset is not aware of these changes.Changes since v4:
* Removed usage ofcrtc_statein upfront link training; Hence no need to find free crtc to do upfront now.
* Re-enable crtc if it was disabled for upfront.
* Use separate variables to track max lane count and link rate found by upfront, without modifying the original DPCD read from panel.
Changes since v3:
* Fixed a return value on BXT check
* Reworked on top ofbxt_ddi_pll_selectsplit from Ander
* Renamed fromddi_upfronttobxt_upfrontsince the upfront logic includes BXT specific functions for now. Changes since v2:
* Rebased on top of latestdpll_mgr.ccode and latest HPD related clean ups.
* Corrected return values from upfront (Ander)
* Corrected atomic locking for upfront inintel_dp.c(Ville) Changes since v1:
* all pll related functions insideddi.cSigned-off-by Durgadoss R <[email protected]>---
drivers/gpu/drm/i915/intel_ddi.c | 58 +++++++++++++ drivers/gpu/drm/i915/intel_dp.c | 183 +++++++++++++++++++++++++++++++++++++- -
drivers/gpu/drm/i915/intel_drv.h | 12 +++3 files changed, 247 insertions(+), 6 deletions(-)drivers/gpu/drm/i915/intel_ddi.c +0
-0@@ -2330,6 +2330,64 @@ intel_ddi_init_hdmi_connector(struct intel_digital_port *intel_dig_port) return connector; }drivers/gpu/drm/i915/intel_ddi.c +20
-0+int intel_bxt_upfront_link_train (struct intel_dp *intel_dp, +int clock,uint8_t lane_count) +{ +struct intel_connector *connector = intel_dp->attached_connector; +struct intel_encoder *encoder = connector->encoder; +struct drm_i915_private *dev_priv =to_i915 (encoder->base.dev); +struct intel_shared_dpll *pll; +struct intel_shared_dpll_config tmp_pll_config; +struct intel_digital_port *dig_port =dp_to_dig_port (intel_dp); +enum intel_dpll_id dpll_id = (enum intel_dpll_id )dig_port->port; + +mutex_lock (&dev_priv->dpll_lock); +/* +* FIXME: Works only for BXT. +* Select the required PLL. This works for platforms where +* there is no shared DPLL. +*/ + pll = &dev_priv->shared_dplls[dpll_id]; +if (WARN_ON (pll->active_mask)) { + DRM_ERROR("Shared DPLL already in use. active_mask:%x\n",
pll->active_mask);drivers/gpu/drm/i915/intel_ddi.c +10
-0+mutex_unlock (&dev_priv->dpll_lock); +return -EINVAL ; + } + + tmp_pll_config = pll->config; + +DRM_DEBUG_KMS ("Upfront link train start : link_clock:%d lanes:%d\n" , + clock, lane_count); + do { + if (!bxt_ddi_dp_set_dpll_hw_state(clock, &pll-Quoted 1 line
config.hw_state)) {
drivers/gpu/drm/i915/intel_ddi.c +10
-0+DRM_ERROR ("Could not setup DPLL\n" ); + goto exit_pll; + } + +/* Enable PLL followed by port */ + pll->funcs.enable (dev_priv, pll); +intel_ddi_pre_enable_dp (encoder, clock, lane_count, pll); + +if (intel_dp->train_set_valid) + intel_dp_set_upfront_params(intel_dp, clock,
lane_count);drivers/gpu/drm/i915/intel_ddi.c +7
-0+ +/* Disable port followed by PLL for next retry/clean up */ +intel_ddi_post_disable (encoder); + pll->funcs.disable (dev_priv, pll); + + }while (!intel_dp->train_set_valid && + intel_dp_get_link_retry_params(intel_dp, &clock,
Quoted 1 line
&lane_count));
What I had in mind is that this loop would still be in the generic DP code. Something like the following in intel_dp_upfront_link_train():
for (done = false, lane_count = 4; lane_count >= 1 && !done; lane_count >> 1) {
/* maybe use intel_dp_common_rates() here */
for (link_rate = HBR2; link_rate >= RBR && !done; link_rate ... ) {
done = platform_specific_link_enable(intel_dp,
link_rate, lane_count);
if (done) {
intel_dp->max_link_bw_upfront = ...;
intel_dp->max_lane_count_upfront = ...;
}
}
}The one inconvenience is that dev_priv->dpll_lock will have to be locked in intel_dp_upfront_link_train() instead of down here. But the end result will be pretty much the same.
drivers/gpu/drm/i915/intel_ddi.c intel_ddi_init_hdmi_connector(struct intel_digital_port *intel_dig_port) · line 2388
Quoted 9 lines
drivers/gpu/drm/i915/intel_ddi.c +9
-0+ +DRM_DEBUG_KMS ("Upfront link train %s: link_clock:%d lanes:%d\n" , + intel_dp->train_set_valid ?"Passed" :"Failed" , clock, lane_count); + +exit_pll: + pll->config = tmp_pll_config; +mutex_unlock (&dev_priv->dpll_lock); + +return intel_dp->train_set_valid ?0 :-1 ;
Do you really intend to return -EPERM in the failure case? Maybe the return value should just be a bool.
Ander
Quoted 288 lines
drivers/gpu/drm/i915/intel_ddi.c +2
-0+} +void
intel_ddi_init(struct drm_device *dev, enum port port){
structdrm_i915_private*dev_priv=dev->dev_private;drivers/gpu/drm/i915/intel_dp.c +5
-1@@ -147,18 +147,28 @@ intel_dp_max_link_bw(struct intel_dp *intel_dp) max_link_bw = DP_LINK_BW_1_62; break; } -return max_link_bw; +/* +* Limit max link bw w.r.t to the max value found +* using Upfront link training also. +*/ +return min (max_link_bw, intel_dp->max_link_bw_upfront); }
static u8intel_dp_max_lane_count(struct intel_dp *intel_dp)
{
structintel_digital_port*intel_dig_port=dp_to_dig_port(intel_dp);drivers/gpu/drm/i915/intel_dp.c +1
-1-u8 source_max, sink_max; +u8 temp, source_max, sink_max;
source_max=intel_dig_port->max_lanes;sink_max=drm_dp_max_lane_count(intel_dp->dpcd);drivers/gpu/drm/i915/intel_dp.c +7
-1-return min (source_max, sink_max); + temp =min (source_max, sink_max); + +/* +* Limit max lanes w.r.t to the max value found +* using Upfront link training also. +*/ +return min (temp, intel_dp->max_lanes_upfront);}
/*drivers/gpu/drm/i915/intel_dp.c +0
-0@@ -1590,6 +1600,49 @@ void intel_dp_set_link_params(struct intel_dp *intel_dp, intel_dp->lane_count = lane_count; }drivers/gpu/drm/i915/intel_dp.c +13
-0+static void intel_dp_init_upfront_params (struct intel_dp *intel_dp) +{ +if (WARN_ON (intel_dp->upfront_done)) +return ; + + intel_dp->max_link_bw_upfront = intel_dp->dpcd[DP_MAX_LINK_RATE ]; + intel_dp->max_lanes_upfront =drm_dp_max_lane_count (intel_dp->dpcd); +} + +void intel_dp_set_upfront_params (struct intel_dp *intel_dp, +int link_rate,uint8_t lane_count) +{ + intel_dp->max_link_bw_upfront =
drm_dp_link_rate_to_bw_code(link_rate);drivers/gpu/drm/i915/intel_dp.c +30
-0+ intel_dp->max_lanes_upfront = lane_count; +} + +bool intel_dp_get_link_retry_params (struct intel_dp *intel_dp, +int *link_rate,uint8_t *lane_count) +{ +uint8_t link_bw =drm_dp_link_rate_to_bw_code (*link_rate); + +/* +* As per DP1.3 Spec, retry all link rates for a particular +* lane count value, before reducing number of lanes. +*/ +if (link_bw ==DP_LINK_BW_5_4 ) { + *link_rate =drm_dp_bw_code_to_link_rate (DP_LINK_BW_2_7 ); + }else if (link_bw ==DP_LINK_BW_2_7 ) { + *link_rate =drm_dp_bw_code_to_link_rate (DP_LINK_BW_1_62 ); + }else if (*lane_count ==4 ) { + *lane_count =2 ; + *link_rate =intel_dp_max_link_rate (intel_dp); + }else if (*lane_count ==2 ) { + *lane_count =1 ; + *link_rate =intel_dp_max_link_rate (intel_dp); + }else { +/* Tried all combinations, so exit */ +return false; + } + +return true; +} +static void
intel_dp_prepare(struct intel_encoder *encoder){
structdrm_device*dev =encoder->base.dev;drivers/gpu/drm/i915/intel_dp.c +0
-0@@ -3424,6 +3477,16 @@ intel_dp_get_dpcd(struct intel_dp *intel_dp) intel_dp->num_sink_rates = i; }drivers/gpu/drm/i915/intel_dp.c +10
-0+/* +* The link_bw and lane count vaues are initialized to MAX possible +* value for all encoder types i.e DP, eDP, DP-MST, so that the +* intel_dp_max_{link_bw/lane_count} APIs do not have to worry +* about encoder types. They further cap the max w.r.t the upfront +* values also. +*/ +if (!intel_dp->upfront_done) +intel_dp_init_upfront_params (intel_dp); +
intel_dp_print_rates(intel_dp);
if (!(intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT] &drivers/gpu/drm/i915/intel_dp.c +0
-0@@ -4140,6 +4203,99 @@ intel_dp_unset_edid(struct intel_dp *intel_dp) intel_dp->has_audio = false; }drivers/gpu/drm/i915/intel_dp.c +93
-0+static int intel_dp_upfront_crtc_disable (struct intel_crtc *crtc, +struct drm_modeset_acquire_ctx *ctx, +bool enable) +{ +int ret; +struct drm_atomic_state *state; +struct intel_crtc_state *crtc_state; +struct drm_device *dev = crtc->base.dev; +enum pipe pipe = crtc->pipe; + + state =drm_atomic_state_alloc (dev); +if (!state) +return -ENOMEM ; + + state->acquire_ctx = ctx; + + crtc_state =intel_atomic_get_crtc_state (state, crtc); +if (IS_ERR (crtc_state)) { + ret =PTR_ERR (crtc_state); +drm_atomic_state_free (state); +return ret; + } + +DRM_DEBUG_KMS ("%sabling crtc %c %s upfront link train\n" , + enable ?"En" :"Dis" , +pipe_name (pipe), + enable ?"after" :"before" ); + + crtc_state->base.active = enable; + ret =drm_atomic_commit (state); +if (ret) +drm_atomic_state_free (state); + +return ret; +} + +static int intel_dp_upfront_link_train (struct intel_dp *intel_dp) +{ +struct intel_digital_port *intel_dig_port =dp_to_dig_port (intel_dp); +struct intel_encoder *intel_encoder = &intel_dig_port->base; +struct drm_device *dev = intel_encoder->base.dev; +struct drm_mode_config *config = &dev->mode_config; +struct drm_modeset_acquire_ctx ctx; +struct intel_crtc *intel_crtc; +struct drm_crtc *crtc =NULL ; +int ret, status =0 ; +uint8_t max_lanes = intel_dp->max_lanes_upfront; +int max_clock =intel_dp_max_link_rate (intel_dp); + +if (!IS_BROXTON (dev)) +return 0 ; + +drm_modeset_acquire_init (&ctx,0 ); +retry: + ret =drm_modeset_lock (&config->connection_mutex, &ctx); +if (ret) + goto exit_fail; + +if (intel_encoder->base.crtc) { + crtc = intel_encoder->base.crtc; + + ret =drm_modeset_lock (&crtc->mutex, &ctx); +if (ret) + goto exit_fail; + + ret =drm_modeset_lock (&crtc->primary->mutex, &ctx); +if (ret) + goto exit_fail; + + intel_crtc =to_intel_crtc (crtc); + ret =intel_dp_upfront_crtc_disable (intel_crtc, &ctx, false); +if (ret) + goto exit_fail; + } + +if (IS_BROXTON (dev)) + status =intel_bxt_upfront_link_train (intel_dp, + max_clock, max_lanes); +/* Other platforms upfront link train call goes here..*/ + +if (crtc) + ret =intel_dp_upfront_crtc_disable (intel_crtc, &ctx, true); + +exit_fail: +if (ret == -EDEADLK ) { +drm_modeset_backoff (&ctx); + goto retry; + } +drm_modeset_drop_locks (&ctx); +drm_modeset_acquire_fini (&ctx); +return status; +} +static void
intel_dp_long_pulse(structintel_connector*intel_connector) {drivers/gpu/drm/i915/intel_dp.c +1
-1@@ -4150,7 +4306,7 @@ intel_dp_long_pulse(struct intel_connector *intel_connector) struct drm_device *dev = connector->dev; enum drm_connector_status status; enum intel_display_power_domain power_domain; -bool ret; +bool ret, do_upfront_link_train; u8 sink_irq_vector;
power_domain=intel_display_port_aux_power_domain(intel_encoder);drivers/gpu/drm/i915/intel_dp.c +0
-0@@ -4235,10 +4391,25 @@ intel_dp_long_pulse(struct intel_connector *intel_connector)
DRM_DEBUG_DRIVER("CP or sink specific irq unhandled\n");
}drivers/gpu/drm/i915/intel_dp.c +14
-0+/* Do not do upfront link train, if it is a compliance request */ + do_upfront_link_train = !intel_dp->upfront_done && + intel_encoder->type ==INTEL_OUTPUT_DISPLAYPORT && + intel_dp->compliance_test_type !=DP_TEST_LINK_TRAINING ; + +if (do_upfront_link_train) { +if (intel_dp_upfront_link_train (intel_dp)) { + status = connector_status_disconnected; + intel_dp->upfront_done = false; + }else { + intel_dp->upfront_done = true; + } + } +out:
drivers/gpu/drm/i915/intel_dp.c +1
-2-if ((status != connector_status_connected) && - (intel_dp->is_mst == false)) +if (status != connector_status_connected && !intel_dp->is_mst) {
intel_dp_unset_edid(intel_dp);drivers/gpu/drm/i915/intel_dp.c +2
-0+ intel_dp->upfront_done = false; + }
intel_display_power_put(to_i915(dev), power_domain); return;drivers/gpu/drm/i915/intel_drv.h +8
-0@@ -812,6 +812,12 @@ struct intel_dp { enum hdmi_force_audio force_audio; bool limited_color_range; bool color_range_auto; + +/* Upfront link train parameters */ +int max_link_bw_upfront; +uint8_t max_lanes_upfront; +bool upfront_done; + uint8_t dpcd[DP_RECEIVER_CAP_SIZE]; uint8_t psr_dpcd[EDP_PSR_RECEIVER_CAP_SIZE]; uint8_t downstream_ports[DP_MAX_DOWNSTREAM_PORTS];@@ -1086,6 +1092,8 @@ void intel_ddi_clock_get(struct intel_encoder *encoder, struct intel_crtc_state *pipe_config); void intel_ddi_set_vc_payload_alloc(struct drm_crtc *crtc, bool state); uint32_t ddi_signal_levels(struct intel_dp *intel_dp); +int intel_bxt_upfront_link_train (struct intel_dp *intel_dp, +int clock,uint8_t lane_count);
/*intel_frontbuffer.c*/
void intel_fb_obj_invalidate(structdrm_i915_gem_object*obj,drivers/gpu/drm/i915/intel_drv.h +4
-0@@ -1292,6 +1300,10 @@ bool intel_dp_init_connector(struct intel_digital_port *intel_dig_port, struct intel_connector *intel_connector); void intel_dp_set_link_params(struct intel_dp *intel_dp, int link_rate, uint8_t lane_count); +void intel_dp_set_upfront_params (struct intel_dp *intel_dp, +int link_rate,uint8_t lane_count); +bool intel_dp_get_link_retry_params (struct intel_dp *intel_dp, +int *link_rate,uint8_t *lane_count); void intel_dp_start_link_train(struct intel_dp *intel_dp); void intel_dp_stop_link_train(struct intel_dp *intel_dp);
Quoted 1 line
void
intel_dp_sink_dpms(struct intel_dp *intel_dp, int mode);
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Ro.CI.BAT: warning for Add USB typeC based DP support for BXT platform (rev6)
In reply to Durgadoss R== Series Details ==
== Series Details ==
Series: Add USB typeC based DP support for BXT platform (rev6)
URL : https://patchwork.freedesktop.org/series/1731/
State : warning
== Summary ==
Series 1731v6 Add USB typeC based DP support for BXT platform
http://patchwork.freedesktop.org/api/1.0/series/1731/revisions/6/mbox
Test drv_module_reload_basic:
pass -> DMESG-WARN (ro-hsw-i7-4770r)
pass -> DMESG-WARN (ro-bdw-i7-5600u)
pass -> DMESG-WARN (ro-bdw-i7-5557U)
pass -> DMESG-WARN (ro-hsw-i3-4010u)
Test gem_exec_suspend:
Subgroup basic-s3:
pass -> DMESG-WARN (ro-hsw-i7-4770r)
pass -> DMESG-WARN (ro-bdw-i7-5600u)
pass -> DMESG-WARN (ro-bdw-i7-5557U)
pass -> DMESG-WARN (ro-hsw-i3-4010u)
Test kms_flip:
Subgroup basic-flip-vs-dpms:
pass -> DMESG-WARN (ro-hsw-i7-4770r)
pass -> DMESG-WARN (ro-bdw-i7-5600u)
pass -> DMESG-WARN (ro-bdw-i7-5557U)
pass -> DMESG-WARN (ro-hsw-i3-4010u)
Subgroup basic-flip-vs-modeset:
pass -> DMESG-WARN (ro-hsw-i7-4770r)
pass -> DMESG-WARN (ro-bdw-i7-5600u)
pass -> DMESG-WARN (ro-bdw-i7-5557U)
pass -> DMESG-WARN (ro-hsw-i3-4010u)
Subgroup basic-flip-vs-wf_vblank:
fail -> PASS (ro-ivb2-i7-3770)
pass -> DMESG-WARN (ro-bdw-i7-5600u)
pass -> DMESG-WARN (ro-bdw-i7-5557U)
pass -> DMESG-WARN (ro-hsw-i3-4010u)
pass -> DMESG-WARN (ro-hsw-i7-4770r)
Subgroup basic-plain-flip:
pass -> DMESG-WARN (ro-hsw-i7-4770r)
pass -> DMESG-WARN (ro-bdw-i7-5600u)
pass -> DMESG-WARN (ro-bdw-i7-5557U)
pass -> DMESG-WARN (ro-hsw-i3-4010u)
Test kms_frontbuffer_tracking:
Subgroup basic:
pass -> DMESG-WARN (ro-hsw-i7-4770r)
pass -> DMESG-WARN (ro-bdw-i7-5600u)
pass -> DMESG-WARN (ro-bdw-i7-5557U)
pass -> DMESG-WARN (ro-hsw-i3-4010u)
Test kms_pipe_crc_basic:
Subgroup hang-read-crc-pipe-a:
pass -> DMESG-WARN (ro-hsw-i7-4770r)
pass -> DMESG-WARN (ro-bdw-i7-5600u)
pass -> DMESG-WARN (ro-bdw-i7-5557U)
pass -> DMESG-WARN (ro-hsw-i3-4010u)
Subgroup hang-read-crc-pipe-b:
pass -> DMESG-WARN (ro-hsw-i7-4770r)
pass -> DMESG-WARN (ro-bdw-i7-5600u)
pass -> DMESG-WARN (ro-bdw-i7-5557U)
pass -> DMESG-WARN (ro-hsw-i3-4010u)
Subgroup hang-read-crc-pipe-c:
pass -> DMESG-WARN (ro-hsw-i7-4770r)
pass -> DMESG-WARN (ro-bdw-i7-5600u)
pass -> DMESG-WARN (ro-bdw-i7-5557U)
pass -> DMESG-WARN (ro-hsw-i3-4010u)
Subgroup nonblocking-crc-pipe-a:
pass -> DMESG-WARN (ro-hsw-i7-4770r)
pass -> DMESG-WARN (ro-bdw-i7-5600u)
pass -> DMESG-WARN (ro-bdw-i7-5557U)
pass -> DMESG-WARN (ro-hsw-i3-4010u)
Subgroup nonblocking-crc-pipe-a-frame-sequence:
pass -> DMESG-WARN (ro-hsw-i7-4770r)
pass -> DMESG-WARN (ro-bdw-i7-5600u)
pass -> DMESG-WARN (ro-bdw-i7-5557U)
pass -> DMESG-WARN (ro-hsw-i3-4010u)
Subgroup nonblocking-crc-pipe-b:
pass -> DMESG-WARN (ro-hsw-i7-4770r)
pass -> DMESG-WARN (ro-bdw-i7-5600u)
pass -> DMESG-WARN (ro-bdw-i7-5557U)
pass -> DMESG-WARN (ro-hsw-i3-4010u)
Subgroup nonblocking-crc-pipe-b-frame-sequence:
pass -> DMESG-WARN (ro-hsw-i7-4770r)
pass -> DMESG-WARN (ro-bdw-i7-5600u)
pass -> DMESG-WARN (ro-bdw-i7-5557U)
pass -> DMESG-WARN (ro-hsw-i3-4010u)
Subgroup nonblocking-crc-pipe-c:
pass -> DMESG-WARN (ro-hsw-i7-4770r)
pass -> DMESG-WARN (ro-bdw-i7-5600u)
pass -> DMESG-WARN (ro-bdw-i7-5557U)
pass -> DMESG-WARN (ro-hsw-i3-4010u)
Subgroup nonblocking-crc-pipe-c-frame-sequence:
pass -> DMESG-WARN (ro-hsw-i7-4770r)
pass -> DMESG-WARN (ro-bdw-i7-5600u)
pass -> DMESG-WARN (ro-bdw-i7-5557U)
pass -> DMESG-WARN (ro-hsw-i3-4010u)
Subgroup read-crc-pipe-a:
pass -> DMESG-WARN (ro-hsw-i7-4770r)
pass -> DMESG-WARN (ro-bdw-i7-5600u)
pass -> DMESG-WARN (ro-bdw-i7-5557U)
pass -> DMESG-WARN (ro-hsw-i3-4010u)
Subgroup read-crc-pipe-a-frame-sequence:
pass -> DMESG-WARN (ro-hsw-i7-4770r)
pass -> DMESG-WARN (ro-bdw-i7-5600u)
pass -> DMESG-WARN (ro-bdw-i7-5557U)
pass -> DMESG-WARN (ro-hsw-i3-4010u)
Subgroup read-crc-pipe-b:
pass -> DMESG-WARN (ro-hsw-i7-4770r)WARNING: Long output truncated
Results at /archive/results/CI_IGT_test/RO_Patchwork_904/
5528ede drm-intel-nightly: 2016y-05m-14d-08h-24m-24s UTC integration manifest 69e3b5e drm/i915/dp: Enable Upfront link training for typeC DP support on BXT dde2293 drm/i915: Split bxt_ddi_pll_select()
b130b36 drm/i915: Split intel_ddi_pre_enable() into DP and HDMI versions c591e3c drm/i915: Remove ddi_pll_sel from intel_crtc_state dd1e798 drm/i915: Don't pass crtc_state to intel_dp_set_link_params()
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx