Skip to contentSkip to conversation

kms_flip_event_leak and kms_vblank fixes for VC4.

PATCH New [email protected] 1 participant 8 messages May 19, 2016 Library code

lore
Share & tools
lore
#0 lore raw

v6 cover kms_flip_event_leak and kms_vblank fixes for VC4.

From: Robert Foss <[email protected]>

Changes since v1:
- kms_vblank: Removed un-used members of data_t struct.
- Rename plane_counter to n_planes.
- Removed un-needed handling CURSOR plane location.
- Added names for additional planes in update kmstest_plane_name.

Changes since v2:
- Rebased onto trunk which already contains kms_flip_event_leak changes.

Changes since v3:
- kms_vblank: Removed drm_fd from data_t, to decrease the number of unrelated changes in the patch.
- kms_vblank: Changed "int valid_tests" to "unsigned valid_tests".
- kms_vblank: Changed crtc_id_flag/crtc_id_to_flag to pipe_id_flag/pipe_id_to_flag.
- kms_vblank: Changed to "vbl.request.type |= crtc_id_flag;".
- kms_vblank: Moved crtc_id_to_flag to igt_kms.c.
- kms_vblank: Renamed crtc_id_to_flag to pipe_id_to_vbl_flag.
- kms_flip: Changed test busy_mode boolean into mode_busy bitfield in struct data.
- igt_kms: Moved IGT_PLANE_CURSOR position comment.

Changes since v4:
- kms_vblank: Removed whitespace at end of file.
- igt_kms: Changed name of helper function to kmstest_get_vbl_flag
- igt_kms: Changed kmstest_get_vbl_flag to not set DRM_VBLANK_RELATIVE flag

Changes since v5:
- kms_flip: Removed assertion that was too strict.
- igt_kms: Add assertions to verify format of vbl flag.

Robert Foss (7):
lib/igt_kms: Add support for up to 10 planes. lib/igt_kms: Fix plane counting in igt_display_init. lib/igt_kms: Switch to verbose assert.
lib/igt_kms: Added kmstest_get_vbl_flag to igt_kms.
kms_vblank: Switch from using crtc0 statically to explicitly setting
mode.
igt_kms: Change igt_wait_for_vblank to use helper function.
kms_flip: Change __wait_for_vblank to use helper function.

 lib/igt_kms.c      |  39 +++++++++++--
 lib/igt_kms.h      |   9 ++-
 tests/kms_flip.c   |   8 +--
 tests/kms_vblank.c | 161 ++++++++++++++++++++++++++++++++++++++++++++---------
 4 files changed, 181 insertions(+), 36 deletions(-)
Signature · 6 lines
2.7.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#1 lore raw

PATCH v6 1/7 lib/igt_kms: Add support for up to 10 planes.

From: Robert Foss <[email protected]>

Increase the number of planes supported to 10.

kmstest_plane_name only previously supported 4 planes, this patch adds support for up to 10 planes.

---
 lib/igt_kms.c | 6 ++++++
 lib/igt_kms.h | 8 +++++++-
 2 files changed, 13 insertions(+), 1 deletion(-)
lib/igt_kms.c +6 -0
index 9d99cc0..7e63ddc 100644
@@ -320,6 +320,12 @@ const char *kmstest_plane_name(enum igt_plane plane)
 		[IGT_PLANE_1] = "plane1",
 		[IGT_PLANE_2] = "plane2",
 		[IGT_PLANE_3] = "plane3",
+		[IGT_PLANE_4] = "plane4",
+		[IGT_PLANE_5] = "plane5",
+		[IGT_PLANE_6] = "plane6",
+		[IGT_PLANE_7] = "plane7",
+		[IGT_PLANE_8] = "plane8",
+		[IGT_PLANE_9] = "plane9",
 		[IGT_PLANE_CURSOR] = "cursor",
 	};
 
lib/igt_kms.h +7 -1
index 7aad8c8..b8f6dd8 100644
@@ -54,7 +54,13 @@ enum igt_plane {
 	IGT_PLANE_PRIMARY = IGT_PLANE_1,
 	IGT_PLANE_2,
 	IGT_PLANE_3,
-	IGT_PLANE_CURSOR,
+	IGT_PLANE_4,
+	IGT_PLANE_5,
+	IGT_PLANE_6,
+	IGT_PLANE_7,
+	IGT_PLANE_8,
+	IGT_PLANE_9,
+	IGT_PLANE_CURSOR, /* IGT_PLANE_CURSOR is always the last plane. */
 	IGT_MAX_PLANES,
 };
 
Signature · 6 lines
2.7.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#2 lore raw

PATCH v6 2/7 lib/igt_kms: Fix plane counting in igt_display_init.

In reply to [email protected]

From: Robert Foss <[email protected]>

Fix issue where the plane counting fails due to the number and configuration of planes being unlike the intel configuration.

---
 lib/igt_kms.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
lib/igt_kms.c +4 -2
index 7e63ddc..1dc2521 100644
@@ -1289,6 +1289,7 @@ void igt_display_init(igt_display_t *display, int drm_fd)
 		igt_plane_t *plane;
 		int p = IGT_PLANE_2;
 		int j, type;
+		uint8_t n_planes = 0;
 
 		pipe->crtc_id = resources->crtcs[i];
 		pipe->display = display;
@@ -1336,8 +1337,10 @@ void igt_display_init(igt_display_t *display, int drm_fd)
 				break;
 			}
 
+			n_planes++;
 			plane->pipe = pipe;
 			plane->drm_plane = drm_plane;
+
 			if (is_atomic == 0) {
 				display->is_atomic = 1;
 				igt_atomic_fill_plane_props(display, plane, IGT_NUM_PLANE_PROPS, igt_plane_prop_names);
@@ -1386,8 +1389,7 @@ void igt_display_init(igt_display_t *display, int drm_fd)
 			plane->is_cursor = true;
 		}
 
-		/* planes = 1 primary, (p-1) sprites, 1 cursor */
-		pipe->n_planes = p + 1;
+		pipe->n_planes = n_planes;
 
 		/* make sure we don't overflow the plane array */
 		igt_assert(pipe->n_planes <= IGT_MAX_PLANES);
Signature · 6 lines
2.7.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#3 lore raw

PATCH v6 3/7 lib/igt_kms: Switch to verbose assert.

In reply to [email protected]

From: Robert Foss <[email protected]>

Switch igt_assert to igt_assert_lte to provide more diagnostic information.

---
 lib/igt_kms.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
lib/igt_kms.c +1 -1
index 1dc2521..1113f57 100644
@@ -1392,7 +1392,7 @@ void igt_display_init(igt_display_t *display, int drm_fd)
 		pipe->n_planes = n_planes;
 
 		/* make sure we don't overflow the plane array */
-		igt_assert(pipe->n_planes <= IGT_MAX_PLANES);
+		igt_assert_lte(pipe->n_planes, IGT_MAX_PLANES);
 	}
 
 	/*
Signature · 6 lines
2.7.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#4 lore raw

PATCH v6 4/7 lib/igt_kms: Added kmstest_get_vbl_flag to igt_kms.

In reply to [email protected]

From: Robert Foss <[email protected]>

Added function kmstest_get_vbl_flag() to igt_kms. This function formats a pipe_id into the format expected by DRM while processing DRM_IOCTL_WAIT_VBLANK.

---
 lib/igt_kms.c | 19 +++++++++++++++++++
 lib/igt_kms.h |  1 +
 2 files changed, 20 insertions(+)
lib/igt_kms.c +19 -0
index 1113f57..0e781ef 100644
@@ -2562,3 +2562,22 @@ void igt_reset_connectors(void)
 		close(fd);
 	}
 }
+
+/**
+ * kmstest_get_vbl_flag:
+ *
+ * Convert a pipe id into the flag representation
+ * expected in DRM while processing DRM_IOCTL_WAIT_VBLANK.
+ */
+uint32_t kmstest_get_vbl_flag(uint32_t pipe_id)
+{
+	if (pipe_id == 0)
+		return 0;
+	else if (pipe_id == 1)
+		return _DRM_VBLANK_SECONDARY;
+	else {
+		uint32_t pipe_flag = pipe_id << 1;
+		igt_assert(!(pipe_flag & ~DRM_VBLANK_HIGH_CRTC_MASK));
+		return pipe_flag;
+	}
+}
lib/igt_kms.h +1 -0
index b8f6dd8..7359d26 100644
@@ -380,6 +380,7 @@ void igt_wait_for_vblank(int drm_fd, enum pipe pipe);
 
 void igt_enable_connectors(void);
 void igt_reset_connectors(void);
+uint32_t kmstest_get_vbl_flag(uint32_t pipe_id);
 
 #define EDID_LENGTH 128
 const unsigned char* igt_kms_get_base_edid(void);
Signature · 6 lines
2.7.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#5 lore raw

PATCH v6 5/7 kms_vblank: Switch from using crtc0 statically to explicitly setting mode.

In reply to [email protected]

From: Robert Foss <[email protected]>

Previously crtc0 was statically used for VBLANK tests, but that assumption is not valid for the VC4 platform. Instead we're now explicitly setting the mode.

Also add support for testing all connected connectors during the same test.

---
 tests/kms_vblank.c | 161 ++++++++++++++++++++++++++++++++++++++++++++---------
 1 file changed, 136 insertions(+), 25 deletions(-)
tests/kms_vblank.c +136 -25
index 40ab6fd..9bc4929 100644
@@ -44,6 +44,14 @@
 
 IGT_TEST_DESCRIPTION("Test speed of WaitVblank.");
 
+typedef struct {
+	igt_display_t display;
+	struct igt_fb primary_fb;
+	igt_output_t *output;
+	enum pipe pipe;
+	uint8_t mode_busy:1;
+} data_t;
+
 static double elapsed(const struct timespec *start,
 		      const struct timespec *end,
 		      int loop)
@@ -51,38 +59,119 @@ static double elapsed(const struct timespec *start,
 	return (1e6*(end->tv_sec - start->tv_sec) + (end->tv_nsec - start->tv_nsec)/1000)/loop;
 }
 
-static bool crtc0_active(int fd)
+static bool prepare_crtc(data_t *data, int fd, igt_output_t *output)
 {
-	union drm_wait_vblank vbl;
+	drmModeModeInfo *mode;
+	igt_display_t *display = &data->display;
+	igt_plane_t *primary;
+
+	/* select the pipe we want to use */
+	igt_output_set_pipe(output, data->pipe);
+	igt_display_commit(display);
+
+	if (!output->valid) {
+		igt_output_set_pipe(output, PIPE_ANY);
+		igt_display_commit(display);
+		return false;
+	}
 
-	memset(&vbl, 0, sizeof(vbl));
-	vbl.request.type = DRM_VBLANK_RELATIVE;
-	return drmIoctl(fd, DRM_IOCTL_WAIT_VBLANK, &vbl) == 0;
+	/* create and set the primary plane fb */
+	mode = igt_output_get_mode(output);
+	igt_create_color_fb(fd, mode->hdisplay, mode->vdisplay,
+			    DRM_FORMAT_XRGB8888,
+			    LOCAL_DRM_FORMAT_MOD_NONE,
+			    0.0, 0.0, 0.0,
+			    &data->primary_fb);
+
+	primary = igt_output_get_plane(output, IGT_PLANE_PRIMARY);
+	igt_plane_set_fb(primary, &data->primary_fb);
+
+	igt_display_commit(display);
+
+	igt_wait_for_vblank(fd, data->pipe);
+
+	return true;
+}
+
+static void cleanup_crtc(data_t *data, int fd, igt_output_t *output)
+{
+	igt_display_t *display = &data->display;
+	igt_plane_t *primary;
+
+	igt_remove_fb(fd, &data->primary_fb);
+
+	primary = igt_output_get_plane(output, IGT_PLANE_PRIMARY);
+	igt_plane_set_fb(primary, NULL);
+
+	igt_output_set_pipe(output, PIPE_ANY);
+	igt_display_commit(display);
+}
+
+static void run_test(data_t *data, int fd, void (*testfunc)(data_t *, int))
+{
+	igt_display_t *display = &data->display;
+	igt_output_t *output;
+	enum pipe p;
+	unsigned int valid_tests = 0;
+
+	for_each_connected_output(display, output) {
+		for_each_pipe(display, p) {
+			data->pipe = p;
+
+			if (!prepare_crtc(data, fd, output))
+				continue;
+
+			valid_tests++;
+
+			igt_info("Beginning %s on pipe %s, connector %s\n",
+				 igt_subtest_name(),
+				 kmstest_pipe_name(data->pipe),
+				 igt_output_name(output));
+
+			testfunc(data, fd);
+
+			igt_info("\n%s on pipe %s, connector %s: PASSED\n\n",
+				 igt_subtest_name(),
+				 kmstest_pipe_name(data->pipe),
+				 igt_output_name(output));
+
+			/* cleanup what prepare_crtc() has done */
+			cleanup_crtc(data, fd, output);
+		}
+	}
+
+	igt_require_f(valid_tests, "no valid crtc/connector combinations found\n");
 }
 
-static void accuracy(int fd)
+static void accuracy(data_t *data, int fd)
 {
 	union drm_wait_vblank vbl;
 	unsigned long target;
+	uint32_t pipe_id_flag;
 	int n;
 
 	memset(&vbl, 0, sizeof(vbl));
+	pipe_id_flag = kmstest_get_vbl_flag(data->pipe);
 
 	vbl.request.type = DRM_VBLANK_RELATIVE;
+	vbl.request.type |= pipe_id_flag;
 	vbl.request.sequence = 1;
 	do_ioctl(fd, DRM_IOCTL_WAIT_VBLANK, &vbl);
 
 	target = vbl.reply.sequence + 60;
 	for (n = 0; n < 60; n++) {
 		vbl.request.type = DRM_VBLANK_RELATIVE;
+		vbl.request.type |= pipe_id_flag;
 		vbl.request.sequence = 1;
 		do_ioctl(fd, DRM_IOCTL_WAIT_VBLANK, &vbl);
 
 		vbl.request.type = DRM_VBLANK_ABSOLUTE | DRM_VBLANK_EVENT;
+		vbl.request.type |= pipe_id_flag;
 		vbl.request.sequence = target;
 		do_ioctl(fd, DRM_IOCTL_WAIT_VBLANK, &vbl);
 	}
 	vbl.request.type = DRM_VBLANK_RELATIVE;
+	vbl.request.type |= pipe_id_flag;
 	vbl.request.sequence = 0;
 	do_ioctl(fd, DRM_IOCTL_WAIT_VBLANK, &vbl);
 	igt_assert_eq(vbl.reply.sequence, target);
@@ -94,22 +183,26 @@ static void accuracy(int fd)
 	}
 }
 
-static void vblank_query(int fd, bool busy)
+static void vblank_query(data_t *data, int fd)
 {
 	union drm_wait_vblank vbl;
 	struct timespec start, end;
 	unsigned long sq, count = 0;
 	struct drm_event_vblank buf;
+	uint32_t pipe_id_flag;
 
 	memset(&vbl, 0, sizeof(vbl));
+	pipe_id_flag = kmstest_get_vbl_flag(data->pipe);
 
-	if (busy) {
+	if (data->mode_busy) {
 		vbl.request.type = DRM_VBLANK_RELATIVE | DRM_VBLANK_EVENT;
+		vbl.request.type |= pipe_id_flag;
 		vbl.request.sequence = 72;
 		do_ioctl(fd, DRM_IOCTL_WAIT_VBLANK, &vbl);
 	}
 
 	vbl.request.type = DRM_VBLANK_RELATIVE;
+	vbl.request.type |= pipe_id_flag;
 	vbl.request.sequence = 0;
 	do_ioctl(fd, DRM_IOCTL_WAIT_VBLANK, &vbl);
 
@@ -118,6 +211,7 @@ static void vblank_query(int fd, bool busy)
 	clock_gettime(CLOCK_MONOTONIC, &start);
 	do {
 		vbl.request.type = DRM_VBLANK_RELATIVE;
+		vbl.request.type |= pipe_id_flag;
 		vbl.request.sequence = 0;
 		do_ioctl(fd, DRM_IOCTL_WAIT_VBLANK, &vbl);
 		count++;
@@ -125,28 +219,32 @@ static void vblank_query(int fd, bool busy)
 	clock_gettime(CLOCK_MONOTONIC, &end);
 
 	igt_info("Time to query current counter (%s):		%7.3fµs\n",
-		 busy ? "busy" : "idle", elapsed(&start, &end, count));
+		 data->mode_busy ? "busy" : "idle", elapsed(&start, &end, count));
 
-	if (busy)
+	if (data->mode_busy)
 		igt_assert_eq(read(fd, &buf, sizeof(buf)), sizeof(buf));
 }
 
-static void vblank_wait(int fd, bool busy)
+static void vblank_wait(data_t *data, int fd)
 {
 	union drm_wait_vblank vbl;
 	struct timespec start, end;
 	unsigned long sq, count = 0;
 	struct drm_event_vblank buf;
+	uint32_t pipe_id_flag;
 
 	memset(&vbl, 0, sizeof(vbl));
+	pipe_id_flag = kmstest_get_vbl_flag(data->pipe);
 
-	if (busy) {
+	if (data->mode_busy) {
 		vbl.request.type = DRM_VBLANK_RELATIVE | DRM_VBLANK_EVENT;
+		vbl.request.type |= pipe_id_flag;
 		vbl.request.sequence = 72;
 		do_ioctl(fd, DRM_IOCTL_WAIT_VBLANK, &vbl);
 	}
 
 	vbl.request.type = DRM_VBLANK_RELATIVE;
+	vbl.request.type |= pipe_id_flag;
 	vbl.request.sequence = 0;
 	do_ioctl(fd, DRM_IOCTL_WAIT_VBLANK, &vbl);
 
@@ -155,6 +253,7 @@ static void vblank_wait(int fd, bool busy)
 	clock_gettime(CLOCK_MONOTONIC, &start);
 	do {
 		vbl.request.type = DRM_VBLANK_RELATIVE;
+		vbl.request.type |= pipe_id_flag;
 		vbl.request.sequence = 1;
 		do_ioctl(fd, DRM_IOCTL_WAIT_VBLANK, &vbl);
 		count++;
@@ -163,36 +262,48 @@ static void vblank_wait(int fd, bool busy)
 
 	igt_info("Time to wait for %ld/%d vblanks (%s):		%7.3fµs\n",
 		 count, (int)(vbl.reply.sequence - sq),
-		 busy ? "busy" : "idle",
+		 data->mode_busy ? "busy" : "idle",
 		 elapsed(&start, &end, count));
 
-	if (busy)
+	if (data->mode_busy)
 		igt_assert_eq(read(fd, &buf, sizeof(buf)), sizeof(buf));
 }
 
 igt_main
 {
 	int fd;
+	data_t data;
 
 	igt_skip_on_simulation();
 
 	igt_fixture {
 		fd = drm_open_driver(DRIVER_ANY);
-		igt_require(crtc0_active(fd));
+		kmstest_set_vt_graphics_mode();
+		igt_display_init(&data.display, fd);
 	}
 
-	igt_subtest("accuracy")
-		accuracy(fd);
+	igt_subtest("accuracy") {
+		data.mode_busy = 0;
+		run_test(&data, fd, accuracy);
+	}
 
-	igt_subtest("query-idle")
-		vblank_query(fd, false);
+	igt_subtest("query-idle") {
+		data.mode_busy = 0;
+		run_test(&data, fd, vblank_query);
+	}
 
-	igt_subtest("query-busy")
-		vblank_query(fd, true);
+	igt_subtest("query-busy") {
+		data.mode_busy = 1;
+		run_test(&data, fd, vblank_query);
+	}
 
-	igt_subtest("wait-idle")
-		vblank_wait(fd, false);
+	igt_subtest("wait-idle") {
+		data.mode_busy = 0;
+		run_test(&data, fd, vblank_wait);
+	}
 
-	igt_subtest("wait-busy")
-		vblank_wait(fd, true);
+	igt_subtest("wait-busy") {
+		data.mode_busy = 1;
+		run_test(&data, fd, vblank_wait);
+	}
 }
Signature · 6 lines
2.7.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#6 lore raw

PATCH v6 6/7 igt_kms: Change igt_wait_for_vblank to use helper function.

In reply to [email protected]

From: Robert Foss <[email protected]>

Change igt_wait_for_vblank() to use kmstest_get_vbl_flag() helper function.

---
 lib/igt_kms.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
lib/igt_kms.c +4 -2
index 0e781ef..9ca204c 100644
@@ -2493,11 +2493,13 @@ void igt_crtc_set_background(igt_pipe_t *pipe, uint64_t background)
 void igt_wait_for_vblank(int drm_fd, enum pipe pipe)
 {
 	drmVBlank wait_vbl;
+	uint32_t pipe_id_flag;
 
 	memset(&wait_vbl, 0, sizeof(wait_vbl));
+	pipe_id_flag = kmstest_get_vbl_flag(pipe);
 
-	wait_vbl.request.type = pipe << DRM_VBLANK_HIGH_CRTC_SHIFT |
-				DRM_VBLANK_RELATIVE;
+	wait_vbl.request.type = DRM_VBLANK_RELATIVE;
+	wait_vbl.request.type |= pipe_id_flag;
 	wait_vbl.request.sequence = 1;
 
 	igt_assert(drmWaitVBlank(drm_fd, &wait_vbl) == 0);
Signature · 6 lines
2.7.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#7 lore raw

PATCH v6 7/7 kms_flip: Change __wait_for_vblank to use helper function.

In reply to [email protected]

From: Robert Foss <[email protected]>

Change __wait_for_vblank() to use kmstest_get_vbl_flag() helper function.

---
 tests/kms_flip.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)
tests/kms_flip.c +3 -5
index 6ec97d0..b3fcb40 100644
@@ -481,15 +481,13 @@ static int __wait_for_vblank(unsigned int flags, int crtc_idx,
 {
 	drmVBlank wait_vbl;
 	int ret;
-	unsigned crtc_idx_mask;
+	uint32_t pipe_id_flag;
 	bool event = !(flags & TEST_VBLANK_BLOCK);
 
 	memset(&wait_vbl, 0, sizeof(wait_vbl));
+	pipe_id_flag = kmstest_get_vbl_flag(crtc_idx);
 
-	crtc_idx_mask = crtc_idx << DRM_VBLANK_HIGH_CRTC_SHIFT;
-	igt_assert(!(crtc_idx_mask & ~DRM_VBLANK_HIGH_CRTC_MASK));
-
-	wait_vbl.request.type = crtc_idx_mask;
+	wait_vbl.request.type = pipe_id_flag;
 	if (flags & TEST_VBLANK_ABSOLUTE)
 		wait_vbl.request.type |= DRM_VBLANK_ABSOLUTE;
 	else
Signature · 6 lines
2.7.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx