ARM: dts: rockchip: add act8846 supplies on rk3288-firefly
Subsystems (2)
Heiko Stübner
maintainerPATCH 1/2 ARM: dts: rockchip: add act8846 supplies on rk3288-firefly
We defined bindings for the supply handling of act8846 regulators now, so describe those on the firefly too.
Signed-off-by Heiko Stuebner <[email protected]>
--- arch/arm/boot/dts/rk3288-firefly.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+)
arch/arm/boot/dts/rk3288-firefly.dtsi +8 -0
@@ -246,6 +246,14 @@ pinctrl-0 = <&pmic_vsel>, <&pwr_hold>; system-power-controller; + vp1-supply = <&vcc_sys>; + vp2-supply = <&vcc_sys>; + vp3-supply = <&vcc_sys>; + vp4-supply = <&vcc_sys>; + inl1-supply = <&vcc_sys>; + inl2-supply = <&vcc_sys>; + inl3-supply = <&vcc_20>; + regulators { vcc_ddr: REG1 { regulator-name = "vcc_ddr";
Signature · 1 line
2.1.4
Heiko Stübner
maintainerPATCH 2/2 ARM: dts: rockchip: enable tsadc on rk3288 boards
The tsadc is used to read cpu and gpu temperatures. Also enable it on the other rk3288 boards beside the evb using the cru reset settings.
Signed-off-by Heiko Stuebner <[email protected]>
--- arch/arm/boot/dts/rk3288-firefly.dtsi | 6 ++++++ arch/arm/boot/dts/rk3288-popmetal.dts | 6 ++++++ 2 files changed, 12 insertions(+)
arch/arm/boot/dts/rk3288-firefly.dtsi +6 -0
@@ -465,6 +465,12 @@ status = "okay"; }; +&tsadc { + rockchip,hw-tshut-mode = <0>; + rockchip,hw-tshut-polarity = <0>; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_xfer>, <&uart0_cts>, <&uart0_rts>;
arch/arm/boot/dts/rk3288-popmetal.dts +6 -0
@@ -406,6 +406,12 @@ }; }; +&tsadc { + rockchip,hw-tshut-mode = <0>; + rockchip,hw-tshut-polarity = <0>; + status = "okay"; +}; + &vopb { status = "okay"; };
Signature · 1 line
2.1.4