Patch "ath10k: fix rx_channel during hw reconfigure" has been added to the 4.5-stable tree

This is a note to let you know that I've just added the patch titled

ath10k: fix rx_channel during hw reconfigure

to the 4.5-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
ath10k-fix-rx_channel-during-hw-reconfigure.patch
and it can be found in the queue-4.5 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

From: Rajkumar Manoharan <[email protected]>
Date: Thu, 7 Apr 2016 12:11:54 +0530
Subject: ath10k: fix rx_channel during hw reconfigure

From: Rajkumar Manoharan <[email protected]>

commit 1ce8c1484e80010a6e4b9611c65668ff77556f45 upstream.

Upon firmware assert, restart work will be triggered so that mac80211 will reconfigure the driver. An issue is reported that after restart work, survey dump data do not contain in-use (SURVEY_INFO_IN_USE) info for operating channel. During reconfigure, since mac80211 already has valid channel context for given radio, channel context iteration return num_chanctx > 0. Hence rx_channel is always NULL. Fix this by assigning channel context to rx_channel when driver restart is in progress.

---
 drivers/net/wireless/ath/ath10k/mac.c |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

@@ -6437,7 +6437,13 @@ ath10k_mac_update_rx_channel(struct ath1
 			def = &vifs[0].new_ctx->def;
 
 		ar->rx_channel = def->chan;
-	} else if (ctx && ath10k_mac_num_chanctxs(ar) == 0) {
+	} else if ((ctx && ath10k_mac_num_chanctxs(ar) == 0) ||
+		   (ctx && (ar->state == ATH10K_STATE_RESTARTED))) {
+		/* During driver restart due to firmware assert, since mac80211
+		 * already has valid channel context for given radio, channel
+		 * context iteration return num_chanctx > 0. So fix rx_channel
+		 * when restart is in progress.
+		 */
 		ar->rx_channel = ctx->def.chan;
 	} else {
 		ar->rx_channel = NULL;

Patches currently in stable-queue which might be from [email protected] are

queue-4.5/ath10k-fix-firmware-assert-in-monitor-mode.patch queue-4.5/ath10k-fix-rx_channel-during-hw-reconfigure.patch