Skip to contentSkip to conversation

spi: st-ssc4: Fix misuse of devm_gpio_request/devm_gpio_free APIs

PATCH In review Axel Lin 2 participants 2 messages Jun 5, 2016 – Sep 14, 2016 1 message not in the archive SPI

lore
Share & tools
lore

Axel Lin

author
#0 lore raw

PATCH 1/1 spi: st-ssc4: Fix misuse of devm_gpio_request/devm_gpio_free APIs

devm_* API is supposed to be used only in probe function call. The resource is allocated at 'probe' and free automatically at 'remove'. Usage of devm_* functions outside probe sometimes leads to resource leak. Thus avoid using devm_* APIs in .setup/.cleanup callbacks.

Signed-off-by Axel Lin <[email protected]>
---
 drivers/spi/spi-st-ssc4.c | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)
drivers/spi/spi-st-ssc4.c +11 -8
index d5adf9f..fb6ed8b 100644
@@ -201,10 +201,7 @@ static int spi_st_transfer_one(struct spi_master *master,
 
 static void spi_st_cleanup(struct spi_device *spi)
 {
-	int cs = spi->cs_gpio;
-
-	if (gpio_is_valid(cs))
-		devm_gpio_free(&spi->dev, cs);
+	gpio_free(spi->cs_gpio);
 }
 
 /* the spi->mode bits understood by this driver: */

@@ -227,14 +224,15 @@ static int spi_st_setup(struct spi_device *spi)
 		return -EINVAL;
 	}
 
-	if (devm_gpio_request(&spi->dev, cs, dev_name(&spi->dev))) {
+	ret = gpio_request(cs, dev_name(&spi->dev));
+	if (ret) {
 		dev_err(&spi->dev, "could not request gpio:%d\n", cs);
-		return -EINVAL;
+		return ret;
 	}
 
 	ret = gpio_direction_output(cs, spi->mode & SPI_CS_HIGH);
 	if (ret)
-		return ret;
+		goto out_free_gpio;
 
 	spi_st_clk = clk_get_rate(spi_st->clk);
 

@@ -243,7 +241,8 @@ static int spi_st_setup(struct spi_device *spi)
 	if (sscbrg < 0x07 || sscbrg > BIT(16)) {
 		dev_err(&spi->dev,
 			"baudrate %d outside valid range %d\n", sscbrg, hz);
-		return -EINVAL;
+		ret = -EINVAL;
+		goto out_free_gpio;
 	}
 
 	spi_st->baud = spi_st_clk / (2 * sscbrg);

@@ -292,6 +291,10 @@ static int spi_st_setup(struct spi_device *spi)
 	 readl_relaxed(spi_st->base + SSC_RBUF);
 
 	 return 0;
+
+out_free_gpio:
+	gpio_free(cs);
+	return ret;
 }
 
 /* Interrupt fired when TX shift register becomes empty */
Signature · 6 lines
2.5.0

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

A message that is not in the archive (sent off-list or not yet received): [email protected]

#2 lore raw

Applied "spi: st-ssc4: Fix misuse of devm_gpio_request/devm_gpio_free APIs" to the spi tree

The patch

spi: st-ssc4: Fix misuse of devm_gpio_request/devm_gpio_free APIs

has been applied to the spi tree at

git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark

Quoted 1 line

From 42531686639d6a3fe49518f2baca3f7256708242 Mon Sep 17 00:00:00 2001

From: Axel Lin <[email protected]>
Date: Sun, 5 Jun 2016 18:42:27 +0800
Subject: [PATCH] spi: st-ssc4: Fix misuse of devm_gpio_request/devm_gpio_free
APIs

devm_* API is supposed to be used only in probe function call. The resource is allocated at 'probe' and free automatically at 'remove'. Usage of devm_* functions outside probe sometimes leads to resource leak. Thus avoid using devm_* APIs in .setup/.cleanup callbacks.

Signed-off-by Axel Lin <[email protected]>
Signed-off-by Mark Brown <[email protected]>
---
 drivers/spi/spi-st-ssc4.c | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)
drivers/spi/spi-st-ssc4.c +11 -8
index a56eca0e95a6..e54b59638458 100644
@@ -175,10 +175,7 @@ static int spi_st_transfer_one(struct spi_master *master,
 
 static void spi_st_cleanup(struct spi_device *spi)
 {
-	int cs = spi->cs_gpio;
-
-	if (gpio_is_valid(cs))
-		devm_gpio_free(&spi->dev, cs);
+	gpio_free(spi->cs_gpio);
 }
 
 /* the spi->mode bits understood by this driver: */

@@ -201,14 +198,15 @@ static int spi_st_setup(struct spi_device *spi)
 		return -EINVAL;
 	}
 
-	if (devm_gpio_request(&spi->dev, cs, dev_name(&spi->dev))) {
+	ret = gpio_request(cs, dev_name(&spi->dev));
+	if (ret) {
 		dev_err(&spi->dev, "could not request gpio:%d\n", cs);
-		return -EINVAL;
+		return ret;
 	}
 
 	ret = gpio_direction_output(cs, spi->mode & SPI_CS_HIGH);
 	if (ret)
-		return ret;
+		goto out_free_gpio;
 
 	spi_st_clk = clk_get_rate(spi_st->clk);
 

@@ -217,7 +215,8 @@ static int spi_st_setup(struct spi_device *spi)
 	if (sscbrg < 0x07 || sscbrg > BIT(16)) {
 		dev_err(&spi->dev,
 			"baudrate %d outside valid range %d\n", sscbrg, hz);
-		return -EINVAL;
+		ret = -EINVAL;
+		goto out_free_gpio;
 	}
 
 	spi_st->baud = spi_st_clk / (2 * sscbrg);

@@ -266,6 +265,10 @@ static int spi_st_setup(struct spi_device *spi)
 	 readl_relaxed(spi_st->base + SSC_RBUF);
 
 	 return 0;
+
+out_free_gpio:
+	gpio_free(cs);
+	return ret;
 }
 
 /* Interrupt fired when TX shift register becomes empty */
Signature · 6 lines
2.8.1

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html