drm/i915: Fix power sequencer use before init
Subsystems (2)
v3 cover drm/i915: Fix power sequencer use before init
This is v3 of [1] addressing Ville's comments. Chris also noted that this patchset leaves open the possibility for eDP not being detected due to us detecting a ghost LVDS. I think that's already broken since then we would leave both LVDS and eDP connectors registered which would contend for the shared PPS and since there wasn't this particular problem reported yet, I left implementing a workaround for that later, when such a bug report arises.
[1]
https://lists.freedesktop.org/archives/intel-gfx/2016-June/098748.html
Imre Deak (3):
drm/i915/ibx,cpt: Don't attempt to register eDP if LVDS was detected drm/i915: Initialize the PPS HW before its first use drm/i915: Group all the PPS init steps to one place
drivers/gpu/drm/i915/intel_display.c | 5 +++ drivers/gpu/drm/i915/intel_dp.c | 67 ++++++++++++++++++++++-------------- 2 files changed, 46 insertions(+), 26 deletions(-)
Signature · 6 lines
2.5.0 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v3 1/3 drm/i915/ibx, cpt: Don't attempt to register eDP if LVDS was detected
Atm on IBX/CPT we attempt to detect if eDP is present even if LVDS was already detected and an encoder for it was registered. This involves trying to read out the eDP DPCD, which in turn needs the same power sequencer that LVDS uses. Poking at the VDD line at an unexpected time may or may not interfere with the LVDS panel, but it's probably safer to prevent this. Registering both an LVDS and an eDP connector would also present a similar problem accessing the shared PPS at any point later in an unexpected way.
We also need this to be able fix PPS initialization before its first use in the next patch. For that we want to be sure that PPS is not in use by LVDS.
v2:
- Split out the PPS init fix to a separate patch. (Chris)
- Add comment about eDP init depending on LVDS init. (Chris)
- Make the use of the intel_encoder ptr less error prone. v3:
- Use IBX/CPT reference instead of the incorrect ILK, add a WARN about this. (Ville)
--- drivers/gpu/drm/i915/intel_display.c | 5 +++++ drivers/gpu/drm/i915/intel_dp.c | 17 +++++++++++++++++ 2 files changed, 22 insertions(+)
drivers/gpu/drm/i915/intel_display.c +5 -0
@@ -14710,6 +14710,11 @@ static void intel_setup_outputs(struct drm_device *dev)struct intel_encoder *encoder;bool dpd_is_edp = false; +/* +* intel_edp_init_connector() depends on this completing first, to +* prevent the registeration of both eDP and LVDS and the incorrect +* sharing of the PPS. +*/ intel_lvds_init (dev);if (intel_crt_present (dev))
drivers/gpu/drm/i915/intel_dp.c +17 -0
@@ -5303,6 +5303,7 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp,struct intel_digital_port *intel_dig_port =dp_to_dig_port (intel_dp);struct intel_encoder *intel_encoder = &intel_dig_port->base;struct drm_device *dev = intel_encoder->base.dev; +struct intel_encoder *tmp_encoder;struct drm_i915_private *dev_priv = dev->dev_private;struct drm_display_mode *fixed_mode =NULL ;struct drm_display_mode *downclock_mode =NULL ;
@@ -5314,6 +5315,22 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp,if (!is_edp (intel_dp))return true; +/* +* On IBX/CPT we may get here with LVDS already registered. Since the +* driver uses the only internal power sequencer available for both +* eDP and LVDS bail out early in this case to prevent interfering +* with an already powered-on LVDS power sequencer. +*/ +for_each_intel_encoder (dev, tmp_encoder) { +if (tmp_encoder->type !=INTEL_OUTPUT_LVDS ) +continue ; + +WARN_ON (!(HAS_PCH_IBX (dev_priv) ||HAS_PCH_CPT (dev_priv))); +DRM_INFO ("LVDS was detected, not registering eDP\n" ); + +return false; + } +pps_lock (intel_dp);intel_edp_panel_vdd_sanitize (intel_dp);pps_unlock (intel_dp);
Signature · 6 lines
2.5.0 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH v3 1/3] drm/i915/ibx, cpt: Don't attempt to register eDP if LVDS was detected
Quoted 63 lines · Imre Deak
Atm on IBX/CPT we attempt to detect if eDP is present even if LVDS was already detected and an encoder for it was registered. This involves trying to read out the eDP DPCD, which in turn needs the same power sequencer that LVDS uses. Poking at the VDD line at an unexpected time may or may not interfere with the LVDS panel, but it's probably safer to prevent this. Registering both an LVDS and an eDP connector would also present a similar problem accessing the shared PPS at any point later in an unexpected way.
We also need this to be able fix PPS initialization before its first use in the next patch. For that we want to be sure that PPS is not in use by LVDS.
v2:
- Split out the PPS init fix to a separate patch. (Chris)
- Add comment about eDP init depending on LVDS init. (Chris)
- Make the use of theintel_encoderptr less error prone. v3:
- Use IBX/CPT reference instead of the incorrect ILK, add a WARN about this. (Ville)CC Ville Syrjälä <[email protected]>CC Chris Wilson <[email protected]>Signed-off-by Imre Deak <[email protected]>Reviewed-by Chris Wilson <[email protected]> (v2)--- drivers/gpu/drm/i915/intel_display.c | 5 +++++ drivers/gpu/drm/i915/intel_dp.c | 17 +++++++++++++++++ 2 files changed, 22 insertions(+)drivers/gpu/drm/i915/intel_display.c +5
-0@@ -14710,6 +14710,11 @@ static void intel_setup_outputs(struct drm_device *dev)struct intel_encoder *encoder;bool dpd_is_edp = false; +/* +* intel_edp_init_connector() depends on this completing first, to +* prevent the registeration of both eDP and LVDS and the incorrect +* sharing of the PPS. +*/ intel_lvds_init (dev);if (intel_crt_present (dev))drivers/gpu/drm/i915/intel_dp.c +2
-0@@ -5303,6 +5303,7 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp,struct intel_digital_port *intel_dig_port =dp_to_dig_port (intel_dp);struct intel_encoder *intel_encoder = &intel_dig_port->base;struct drm_device *dev = intel_encoder->base.dev; +struct intel_encoder *tmp_encoder;struct drm_i915_private *dev_priv = dev->dev_private;struct drm_display_mode *fixed_mode =NULL ;struct drm_display_mode *downclock_mode =NULL ;@@ -5314,6 +5315,22 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp,if (!is_edp (intel_dp))return true; +/*
drivers/gpu/drm/i915/intel_dp.c static bool intel_edp_init_connector(struct intel_dp *intel_dp, · line 5328
Quoted 10 lines
drivers/gpu/drm/i915/intel_dp.c +10
-0+* On IBX/CPT we may get here with LVDS already registered. Since the +* driver uses the only internal power sequencer available for both +* eDP and LVDS bail out early in this case to prevent interfering +* with an already powered-on LVDS power sequencer. +*/ +for_each_intel_encoder (dev, tmp_encoder) { +if (tmp_encoder->type !=INTEL_OUTPUT_LVDS ) +continue ; + +WARN_ON (!(HAS_PCH_IBX (dev_priv) ||HAS_PCH_CPT (dev_priv)));
I think I usually prefer '!A && !B' for whatever reason. Either works.
drivers/gpu/drm/i915/intel_dp.c static bool intel_edp_init_connector(struct intel_dp *intel_dp, · line 5332
Quoted 4 lines
drivers/gpu/drm/i915/intel_dp.c +4
-0+DRM_INFO ("LVDS was detected, not registering eDP\n" ); + +return false; + }
I would have probably stuffed the loop into a small helper (eg. has_lvds_encoder() or something along those lines). But this works too, so
Quoted 6 lines
drivers/gpu/drm/i915/intel_dp.c +1
-0+pps_lock (intel_dp);intel_edp_panel_vdd_sanitize (intel_dp);pps_unlock (intel_dp);Signature · 1 line
2.5.0
Signature · 6 lines
Ville Syrjälä Intel OTC _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH v3 1/3] drm/i915/ibx, cpt: Don't attempt to register eDP if LVDS was detected
Quoted 68 lines · Ville Syrjälä
Quoted 67 lines · Imre Deak
Atm on IBX/CPT we attempt to detect if eDP is present even if LVDS was already detected and an encoder for it was registered. This involves trying to read out the eDP DPCD, which in turn needs the same power sequencer that LVDS uses. Poking at the VDD line at an unexpected time may or may not interfere with the LVDS panel, but it's probably safer to prevent this. Registering both an LVDS and an eDP connector would also present a similar problem accessing the shared PPS at any point later in an unexpected way.
We also need this to be able fix PPS initialization before its first use in the next patch. For that we want to be sure that PPS is not in use by LVDS.
v2:
- Split out the PPS init fix to a separate patch. (Chris)
- Add comment about eDP init depending on LVDS init. (Chris)
- Make the use of theintel_encoderptr less error prone. v3:
- Use IBX/CPT reference instead of the incorrect ILK, add a WARN about this. (Ville)CC Ville Syrjälä <[email protected]>CC Chris Wilson <[email protected]>Signed-off-by Imre Deak <[email protected]>Reviewed-by Chris Wilson <[email protected]> (v2)---
drivers/gpu/drm/i915/intel_display.c | 5 +++++ drivers/gpu/drm/i915/intel_dp.c | 17 +++++++++++++++++2 files changed, 22 insertions(+)drivers/gpu/drm/i915/intel_display.c +0
-0@@ -14710,6 +14710,11 @@ static void intel_setup_outputs(struct drm_device *dev) struct intel_encoder *encoder; bool dpd_is_edp = false;drivers/gpu/drm/i915/intel_display.c +5
-0+/* +* intel_edp_init_connector() depends on this completing first, to +* prevent the registeration of both eDP and LVDS and the incorrect +* sharing of the PPS. +*/
intel_lvds_init(dev);
if (intel_crt_present(dev))drivers/gpu/drm/i915/intel_dp.c +1
-0@@ -5303,6 +5303,7 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp, struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); struct intel_encoder *intel_encoder = &intel_dig_port->base; struct drm_device *dev = intel_encoder->base.dev; +struct intel_encoder *tmp_encoder; struct drm_i915_private *dev_priv = dev->dev_private; struct drm_display_mode *fixed_mode = NULL; struct drm_display_mode *downclock_mode = NULL;@@ -5314,6 +5315,22 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp, if (!is_edp(intel_dp)) return true;drivers/gpu/drm/i915/intel_dp.c +5
-0+/* +* On IBX/CPT we may get here with LVDS already registered. Since the +* driver uses the only internal power sequencer available for both +* eDP and LVDS bail out early in this case to prevent interfering +* with an already powered-on LVDS power sequencer.
Quoted 8 lines
drivers/gpu/drm/i915/intel_dp.c static bool intel_edp_init_connector(struct intel_dp *intel_dp, · line 5328
Quoted 6 lines
drivers/gpu/drm/i915/intel_dp.c +6
-0+*/ +for_each_intel_encoder (dev, tmp_encoder) { +if (tmp_encoder->type !=INTEL_OUTPUT_LVDS ) +continue ; + +WARN_ON (!(HAS_PCH_IBX (dev_priv) ||HAS_PCH_CPT (dev_priv)));I think I usually prefer '!A && !B' for whatever reason. Either works.
I couldn't decide either, we have it both ways in the driver.
Quoted 8 lines
drivers/gpu/drm/i915/intel_dp.c static bool intel_edp_init_connector(struct intel_dp *intel_dp, · line 5332
Quoted 4 lines
drivers/gpu/drm/i915/intel_dp.c +4
-0+DRM_INFO ("LVDS was detected, not registering eDP\n" ); + +return false; + }I would have probably stuffed the loop into a small helper (eg.
has_lvds_encoder()or something along those lines). But this works too, so
There was the same loop in intel_lvds.c, so I added a helper there and changed it here while applying.
I pushed all 3 patches to -dinq, thanks for the reviews.
Quoted 9 lines
Reviewed-by Ville Syrjälä <[email protected]>Quoted 6 lines
+
pps_lock(intel_dp);
intel_edp_panel_vdd_sanitize(intel_dp);
pps_unlock(intel_dp);
--
2.5.0
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v3 2/3 drm/i915: Initialize the PPS HW before its first use
In reply to Imre DeakThe initial DPCD read for eDP detection involves using the PPS, but so far we only initialized the PPS registers after the DPCD read. The reason this was done so far is to preserve a possible LVDS PPS HW setup if LVDS is detected but eDP is not. This is not an issue any more after the previous patch, so we can move the init earlier now.
This was caught by CI with the PPS sanity checks in place and the initial eDP DPCD readout waiting for the panel power cycle timeout without the PPS registers being initialized.
--- drivers/gpu/drm/i915/intel_dp.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-)
drivers/gpu/drm/i915/intel_dp.c +1 -5
@@ -5333,6 +5333,7 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp,pps_lock (intel_dp);intel_edp_panel_vdd_sanitize (intel_dp); +intel_dp_init_panel_power_sequencer_registers (dev, intel_dp);pps_unlock (intel_dp);/* Cache DPCD and EDID for edp. */
@@ -5349,11 +5350,6 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp,return false; } -/* We now know it's not a ghost, init power sequence regs. */ -pps_lock (intel_dp); -intel_dp_init_panel_power_sequencer_registers (dev, intel_dp); -pps_unlock (intel_dp); -mutex_lock (&dev->mode_config.mutex); edid =drm_get_edid (connector, &intel_dp->aux.ddc);if (edid) {
Signature · 6 lines
2.5.0 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH v3 2/3] drm/i915: Initialize the PPS HW before its first use
Quoted 6 lines · Imre Deak
The initial DPCD read for eDP detection involves using the PPS, but so far we only initialized the PPS registers after the DPCD read. The reason this was done so far is to preserve a possible LVDS PPS HW setup if LVDS is detected but eDP is not. This is not an issue any more after the previous patch, so we can move the init earlier now.
Quoted 8 lines
This was caught by CI with the PPS sanity checks in place and the initial eDP DPCD readout waiting for the panel power cycle timeout without the PPS registers being initialized.
CC Ville Syrjälä <[email protected]>CC Chris Wilson <[email protected]>Signed-off-by Imre Deak <[email protected]>Reviewed-by Chris Wilson <[email protected]>
Seems fine.
Quoted 30 lines
--- drivers/gpu/drm/i915/intel_dp.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-)drivers/gpu/drm/i915/intel_dp.c +1
-5@@ -5333,6 +5333,7 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp,pps_lock (intel_dp);intel_edp_panel_vdd_sanitize (intel_dp); +intel_dp_init_panel_power_sequencer_registers (dev, intel_dp);pps_unlock (intel_dp);/* Cache DPCD and EDID for edp. */ @@ -5349,11 +5350,6 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp,return false; } -/* We now know it's not a ghost, init power sequence regs. */ -pps_lock (intel_dp); -intel_dp_init_panel_power_sequencer_registers (dev, intel_dp); -pps_unlock (intel_dp); -mutex_lock (&dev->mode_config.mutex); edid =drm_get_edid (connector, &intel_dp->aux.ddc);if (edid) {Signature · 1 line
2.5.0
Signature · 6 lines
Ville Syrjälä Intel OTC _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v3 3/3 drm/i915: Group all the PPS init steps to one place
In reply to Imre DeakMove the early PPS initialization calls next to the rest of PPS initialization steps. This allows us to forgo a duplicated call to intel_dp_init_panel_power_sequencer_registers() on VLV/CHV.
This will swap the order of DP AUX registration wrt. PPS initialization. There is an existing race here in case of a user space access via the DPAUX device node after DP AUX registration and before calling intel_dp_init_panel_power_sequencer_registers(), but this change won't make this worse. The fix for this is to separate DP AUX initialization and registration, that's a separate work already underway.
The order of MST wrt. PPS init as well as the order of intel_dp_init_panel_power_sequencer_registers() wrt. intel_edp_panel_vdd_sanitize() also swap, which is ok, there are no dependencies between these steps.
Suggested by Ville.
--- drivers/gpu/drm/i915/intel_dp.c | 46 +++++++++++++++++++++-------------------- 1 file changed, 24 insertions(+), 22 deletions(-)
drivers/gpu/drm/i915/intel_dp.c +24 -22
@@ -5332,8 +5332,18 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp, }pps_lock (intel_dp); + +intel_dp_init_panel_power_timestamps (intel_dp); + +if (IS_VALLEYVIEW (dev) ||IS_CHERRYVIEW (dev)) { +vlv_initial_power_sequencer_setup (intel_dp); + }else { +intel_dp_init_panel_power_sequencer (dev, intel_dp); +intel_dp_init_panel_power_sequencer_registers (dev, intel_dp); + } +intel_edp_panel_vdd_sanitize (intel_dp); -intel_dp_init_panel_power_sequencer_registers (dev, intel_dp); +pps_unlock (intel_dp);/* Cache DPCD and EDID for edp. */
@@ -5347,7 +5357,7 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp, }else {/* if this fails, presume the device is a ghost */ DRM_INFO ("failed to retrieve link info, disabling eDP\n" ); -return false; + goto out_vdd_off; }mutex_lock (&dev->mode_config.mutex);
@@ -5417,6 +5427,18 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp,intel_panel_setup_backlight (connector, pipe);return true; + +out_vdd_off: +cancel_delayed_work_sync (&intel_dp->panel_vdd_work); +/* +* vdd might still be enabled do to the delayed vdd off. +* Make sure vdd is actually turned off here. +*/ +pps_lock (intel_dp); +edp_panel_vdd_off_sync (intel_dp); +pps_unlock (intel_dp); + +return false; }bool
@@ -5522,16 +5544,6 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,BUG (); } -if (is_edp (intel_dp)) { -pps_lock (intel_dp); -intel_dp_init_panel_power_timestamps (intel_dp); -if (IS_VALLEYVIEW (dev) ||IS_CHERRYVIEW (dev)) -vlv_initial_power_sequencer_setup (intel_dp); -else -intel_dp_init_panel_power_sequencer (dev, intel_dp); -pps_unlock (intel_dp); - } - ret =intel_dp_aux_init (intel_dp, intel_connector);if (ret) goto fail;
@@ -5564,16 +5576,6 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,return true; fail: -if (is_edp (intel_dp)) { -cancel_delayed_work_sync (&intel_dp->panel_vdd_work); -/* -* vdd might still be enabled do to the delayed vdd off. -* Make sure vdd is actually turned off here. -*/ -pps_lock (intel_dp); -edp_panel_vdd_off_sync (intel_dp); -pps_unlock (intel_dp); - }drm_connector_unregister (connector);drm_connector_cleanup (connector);
Signature · 6 lines
2.5.0 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH v3 3/3] drm/i915: Group all the PPS init steps to one place
Quoted 16 lines · Imre Deak
Move the early PPS initialization calls next to the rest of PPS initialization steps. This allows us to forgo a duplicated call to
intel_dp_init_panel_power_sequencer_registers()on VLV/CHV.This will swap the order of DP AUX registration wrt. PPS initialization. There is an existing race here in case of a user space access via the DPAUX device node after DP AUX registration and before calling
intel_dp_init_panel_power_sequencer_registers(), but this change won't make this worse. The fix for this is to separate DP AUX initialization and registration, that's a separate work already underway.The order of MST wrt. PPS init as well as the order of
intel_dp_init_panel_power_sequencer_registers()wrt.intel_edp_panel_vdd_sanitize()also swap, which is ok, there are no dependencies between these steps.
Quoted 4 lines
Suggested by Ville.
CC Ville Syrjälä <[email protected]>Signed-off-by Imre Deak <[email protected]>
lgtm
Quoted 92 lines
--- drivers/gpu/drm/i915/intel_dp.c | 46 +++++++++++++++++++++-------------------- 1 file changed, 24 insertions(+), 22 deletions(-)drivers/gpu/drm/i915/intel_dp.c +24
-22@@ -5332,8 +5332,18 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp, }pps_lock (intel_dp); + +intel_dp_init_panel_power_timestamps (intel_dp); + +if (IS_VALLEYVIEW (dev) ||IS_CHERRYVIEW (dev)) { +vlv_initial_power_sequencer_setup (intel_dp); + }else { +intel_dp_init_panel_power_sequencer (dev, intel_dp); +intel_dp_init_panel_power_sequencer_registers (dev, intel_dp); + } +intel_edp_panel_vdd_sanitize (intel_dp); -intel_dp_init_panel_power_sequencer_registers (dev, intel_dp); +pps_unlock (intel_dp);/* Cache DPCD and EDID for edp. */ @@ -5347,7 +5357,7 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp, }else {/* if this fails, presume the device is a ghost */ DRM_INFO ("failed to retrieve link info, disabling eDP\n" ); -return false; + goto out_vdd_off; }mutex_lock (&dev->mode_config.mutex);@@ -5417,6 +5427,18 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp,intel_panel_setup_backlight (connector, pipe);return true; + +out_vdd_off: +cancel_delayed_work_sync (&intel_dp->panel_vdd_work); +/* +* vdd might still be enabled do to the delayed vdd off. +* Make sure vdd is actually turned off here. +*/ +pps_lock (intel_dp); +edp_panel_vdd_off_sync (intel_dp); +pps_unlock (intel_dp); + +return false; }bool @@ -5522,16 +5544,6 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,BUG (); } -if (is_edp (intel_dp)) { -pps_lock (intel_dp); -intel_dp_init_panel_power_timestamps (intel_dp); -if (IS_VALLEYVIEW (dev) ||IS_CHERRYVIEW (dev)) -vlv_initial_power_sequencer_setup (intel_dp); -else -intel_dp_init_panel_power_sequencer (dev, intel_dp); -pps_unlock (intel_dp); - } - ret =intel_dp_aux_init (intel_dp, intel_connector);if (ret) goto fail;@@ -5564,16 +5576,6 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,return true; fail: -if (is_edp (intel_dp)) { -cancel_delayed_work_sync (&intel_dp->panel_vdd_work); -/* -* vdd might still be enabled do to the delayed vdd off. -* Make sure vdd is actually turned off here. -*/ -pps_lock (intel_dp); -edp_panel_vdd_off_sync (intel_dp); -pps_unlock (intel_dp); - }drm_connector_unregister (connector);drm_connector_cleanup (connector);Signature · 1 line
2.5.0
Signature · 6 lines
Ville Syrjälä Intel OTC _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Ro.CI.BAT: warning for drm/i915: Fix power sequencer use before init
In reply to Imre Deak== Series Details ==
== Series Details ==
Series: drm/i915: Fix power sequencer use before init
URL : https://patchwork.freedesktop.org/series/8967/
State : warning
== Summary ==
Series 8967v1 drm/i915: Fix power sequencer use before init
http://patchwork.freedesktop.org/api/1.0/series/8967/revisions/1/mbox
Test kms_flip:
Subgroup basic-flip-vs-wf_vblank:
fail -> PASS (ro-snb-i7-2620M)
Test kms_pipe_crc_basic:
Subgroup suspend-read-crc-pipe-a:
skip -> DMESG-WARN (ro-bdw-i5-5250u)
Subgroup suspend-read-crc-pipe-b:
skip -> DMESG-WARN (ro-bdw-i5-5250u)
Subgroup suspend-read-crc-pipe-c:
skip -> DMESG-WARN (ro-bdw-i5-5250u)fi-skl-i5-6260u total:225 pass:200 dwarn:0 dfail:0 fail:2 skip:23 fi-skl-i7-6700k total:225 pass:186 dwarn:0 dfail:0 fail:2 skip:37 fi-snb-i7-2600 total:225 pass:172 dwarn:0 dfail:0 fail:2 skip:51 ro-bdw-i5-5250u total:225 pass:197 dwarn:4 dfail:0 fail:0 skip:24 ro-bdw-i7-5600u total:225 pass:185 dwarn:0 dfail:0 fail:0 skip:40 ro-byt-n2820 total:225 pass:173 dwarn:0 dfail:0 fail:3 skip:49 ro-hsw-i3-4010u total:225 pass:190 dwarn:0 dfail:0 fail:0 skip:35 ro-hsw-i7-4770r total:225 pass:190 dwarn:0 dfail:0 fail:0 skip:35 ro-ilk-i7-620lm total:225 pass:150 dwarn:0 dfail:0 fail:1 skip:74 ro-ilk1-i5-650 total:220 pass:150 dwarn:0 dfail:0 fail:1 skip:69 ro-ivb-i7-3770 total:225 pass:181 dwarn:0 dfail:0 fail:0 skip:44 ro-ivb2-i7-3770 total:225 pass:185 dwarn:0 dfail:0 fail:0 skip:40 ro-skl3-i5-6260u total:225 pass:201 dwarn:1 dfail:0 fail:0 skip:23 ro-snb-i7-2620M total:225 pass:174 dwarn:0 dfail:0 fail:1 skip:50
fi-hsw-i7-4770k failed to connect after reboot
ro-bdw-i7-5557U failed to connect after reboot
Results at /archive/results/CI_IGT_test/RO_Patchwork_1249/
79c69c3 drm-intel-nightly: 2016y-06m-21d-08h-53m-58s UTC integration manifest 8464015 drm/i915: Group all the PPS init steps to one place d07dffd drm/i915: Initialize the PPS HW before its first use 1ce6454 drm/i915/ibx, cpt: Don't attempt to register eDP if LVDS was detected
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: ✗ Ro.CI.BAT: warning for drm/i915: Fix power sequencer use before init
Quoted 11 lines · Patchwork
== Series Details ==
Series: drm/i915: Fix power sequencer use before init URL : https://patchwork.freedesktop.org/series/8967/
State : warning== Summary ==
Series 8967v1 drm/i915: Fix power sequencer use before init
http://patchwork.freedesktop.org/api/1.0/series/8967/revisions/1/mbox
Quoted 10 lines
Test
kms_flip:
Subgroup basic-flip-vs-wf_vblank:
fail -> PASS (ro-snb-i7-2620M) Testkms_pipe_crc_basic:
Subgroup suspend-read-crc-pipe-a:
skip -> DMESG-WARN (ro-bdw-i5-5250u) Subgroup suspend-read-crc-pipe-b:
skip -> DMESG-WARN (ro-bdw-i5-5250u) Subgroup suspend-read-crc-pipe-c:
skip -> DMESG-WARN (ro-bdw-i5-5250u)
All the above are pre-existing issues and not related to these patches since the machine above doesn't have an eDP connection. I opened a bug:
https://bugs.freedesktop.org/show_bug.cgi?id=96614
After suspend-to-ram and resume on an external DP output:
[ 291.867864] [drm:intel_enable_shared_dpll] enable LCPLL 1350 (active 1, on? 0) for crtc 26 [ 291.867865] [drm:intel_enable_shared_dpll] enabling LCPLL 1350
[ 291.870603] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7145000c
...
[ 291.950407] [drm:drm_dp_dpcd_access] too many retries, giving up
...
[ 292.119813] [drm:intel_dp_sink_dpms] failed to enable sink power state
...
[ 292.373085] [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* failed to enable link training
...
[ 292.458254] [drm:intel_dp_start_link_train [i915]] *ERROR* failed to start channel equalization
Quoted 32 lines
fi-skl-i5-
6260u total:225 pass:200 dwarn:0 dfail:0 fail:2 skip:23 fi-skl-i7-
6700k total:225 pass:186 dwarn:0 dfail:0 fail:2 skip:37 fi-snb-i7-
2600 total:225 pass:172 dwarn:0 dfail:0 fail:2 skip:51 ro-bdw-i5-
5250u total:225 pass:197 dwarn:4 dfail:0 fail:0 skip:24 ro-bdw-i7-
5600u total:225 pass:185 dwarn:0 dfail:0 fail:0 skip:40 ro-byt-
n2820 total:225 pass:173 dwarn:0 dfail:0 fail:3 skip:49 ro-hsw-i3-
4010u total:225 pass:190 dwarn:0 dfail:0 fail:0 skip:35 ro-hsw-i7-
4770r total:225 pass:190 dwarn:0 dfail:0 fail:0 skip:35 ro-ilk-i7-
620lm total:225 pass:150 dwarn:0 dfail:0 fail:1 skip:74 ro-ilk1-i5-
650 total:220 pass:150 dwarn:0 dfail:0 fail:1 skip:69 ro-ivb-i7-
3770 total:225 pass:181 dwarn:0 dfail:0 fail:0 skip:44 ro-ivb2-i7-
3770 total:225 pass:185 dwarn:0 dfail:0 fail:0 skip:40 ro-skl3-i5-6260u
total:225 pass:201 dwarn:1 dfail:0 fail:0 skip:23 ro-snb-i7-
2620M total:225 pass:174 dwarn:0 dfail:0 fail:1 skip:50 fi-hsw-i7-4770k failed to connect after reboot ro-bdw-i7-5557U failed to connect after reboot
Quoted 9 lines
Results at /archive/results/CI_IGT_test/RO_Patchwork_1249/
79c69c3 drm-intel-nightly: 2016y-06m-21d-08h-53m-58s UTC integration manifest
8464015 drm/i915: Group all the PPS init steps to one place d07dffd drm/i915: Initialize the PPS HW before its first use 1ce6454 drm/i915/ibx, cpt: Don't attempt to register eDP if LVDS was detected
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx