Skip to contentSkip to conversation

drm/amd/powerplay: fix typos of volt/millivolt symbols in comment.

PATCH In review Rex Zhu 3 participants 8 messages Jul 28, 2016 5 messages not in the archive

Subsystems (2)
lore
Share & tools
lore

Rex Zhu

author
#0 lore raw

PATCH 1/4 drm/amd/powerplay: fix typos of volt/millivolt symbols in comment.

Change-Id Ife6002b68b1e64f76886e6e421b3e6f5f454eda9
---
 drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c +2 -2
index e09c231..c81e8a5 100644
@@ -2908,8 +2908,8 @@ static int polaris10_get_evv_voltages(struct pp_hwmgr *hwmgr)
 				continue;
 			}
 
-			/* need to make sure vddc is less than 2v or else, it could burn the ASIC.
-			 * real voltage level in unit of 0.01mv */
+			/* need to make sure vddc is less than 2V or else, it could burn the ASIC.
+			 * real voltage level in unit of 0.01mV */
 			PP_ASSERT_WITH_CODE((vddc < 200000 && vddc != 0),
 					"Invalid VDDC value", result = -EINVAL;);
 
Signature · 6 lines
1.9.1

_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

A message that is not in the archive (sent off-list or not yet received): 1469699605-13978-1-git-send-email-Rex.Zhu-5C7GfCeVMHo@public.gmane.org

author
#2 lore raw

PATCH 2/4 drm/amdgpu: add module parameters to ctrl powerplay feature

Change-Id I520ff615c5fe1dd78ef2e97c60437347a4994a5a
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c            |  4 ++++
 drivers/gpu/drm/amd/amdgpu/amdgpu_powerplay.c      |  1 -
 drivers/gpu/drm/amd/powerplay/amd_powerplay.c      |  1 +
 drivers/gpu/drm/amd/powerplay/hwmgr/fiji_hwmgr.c   |  3 ---
 .../gpu/drm/amd/powerplay/hwmgr/fiji_powertune.c   |  5 ++---
 drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c        | 22 +++++++++++++++++++++-
 .../drm/amd/powerplay/hwmgr/iceland_powertune.c    |  5 ++---
 .../gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c  | 10 ----------
 drivers/gpu/drm/amd/powerplay/inc/amd_powerplay.h  |  2 +-
 drivers/gpu/drm/amd/powerplay/inc/hwmgr.h          |  4 +++-
 10 files changed, 34 insertions(+), 23 deletions(-)
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +4 -0
index b71a970..f2af1ff 100644
@@ -85,6 +85,7 @@ int amdgpu_sched_jobs = 32;
 int amdgpu_sched_hw_submission = 2;
 int amdgpu_powerplay = -1;
 int amdgpu_powercontainment = 1;
+int amdgpu_sclk_deep_sleep_en = 1;
 unsigned amdgpu_pcie_gen_cap = 0;
 unsigned amdgpu_pcie_lane_cap = 0;
 unsigned amdgpu_cg_mask = 0xffffffff;
@@ -173,6 +174,9 @@ MODULE_PARM_DESC(powercontainment, "Power Containment (1 = enable (default), 0 =
 module_param_named(powercontainment, amdgpu_powercontainment, int, 0444);
 #endif
 
+MODULE_PARM_DESC(sclkdeepsleep, "SCLK Deep Sleep (1 = enable (default), 0 = disable)");
+module_param_named(sclkdeepsleep, amdgpu_sclk_deep_sleep_en, int, 0444);
+
 MODULE_PARM_DESC(pcie_gen_cap, "PCIE Gen Caps (0: autodetect (default))");
 module_param_named(pcie_gen_cap, amdgpu_pcie_gen_cap, uint, 0444);
 
drivers/gpu/drm/amd/amdgpu/amdgpu_powerplay.c +0 -1
index afeff95..02bd62a 100644
@@ -52,7 +52,6 @@ static int amdgpu_powerplay_init(struct amdgpu_device *adev)
 		pp_init->chip_family = adev->family;
 		pp_init->chip_id = adev->asic_type;
 		pp_init->device = amdgpu_cgs_create_device(adev);
-		pp_init->powercontainment_enabled = amdgpu_powercontainment;
 
 		ret = amd_powerplay_init(pp_init, amd_pp);
 		kfree(pp_init);
drivers/gpu/drm/amd/powerplay/amd_powerplay.c +1 -0
index f9e03ad..e6436ee 100644
@@ -31,6 +31,7 @@
 #include "eventmanager.h"
 #include "pp_debug.h"
 
+
 #define PP_CHECK(handle)						\
 	do {								\
 		if ((handle) == NULL || (handle)->pp_valid != PP_VALID)	\
drivers/gpu/drm/amd/powerplay/hwmgr/fiji_hwmgr.c +0 -3
index 744aa88..9ff55f8 100644
@@ -619,9 +619,6 @@ static int fiji_hwmgr_backend_init(struct pp_hwmgr *hwmgr)
 	phm_cap_set(hwmgr->platform_descriptor.platformCaps,
 			PHM_PlatformCaps_TablelessHardwareInterface);
 
-	phm_cap_set(hwmgr->platform_descriptor.platformCaps,
-			PHM_PlatformCaps_SclkDeepSleep);
-
 	data->gpio_debug = 0;
 
 	phm_cap_set(hwmgr->platform_descriptor.platformCaps,
drivers/gpu/drm/amd/powerplay/hwmgr/fiji_powertune.c +2 -3
index 4465845..c3b2f51 100644
@@ -77,9 +77,8 @@ void fiji_initialize_power_tune_defaults(struct pp_hwmgr *hwmgr)
 
 		fiji_hwmgr->fast_watermark_threshold = 100;
 
-		if (hwmgr->powercontainment_enabled) {
-			phm_cap_set(hwmgr->platform_descriptor.platformCaps,
-				    PHM_PlatformCaps_PowerContainment);
+		if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps,
+					PHM_PlatformCaps_PowerContainment)) {
 			tmp = 1;
 			fiji_hwmgr->enable_dte_feature = tmp ? false : true;
 			fiji_hwmgr->enable_tdc_limit_feature = tmp ? true : false;
drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c +21 -1
index 411c267..98ff749 100644
@@ -41,6 +41,25 @@ extern int fiji_hwmgr_init(struct pp_hwmgr *hwmgr);
 extern int polaris10_hwmgr_init(struct pp_hwmgr *hwmgr);
 extern int iceland_hwmgr_init(struct pp_hwmgr *hwmgr);
 
+static int hwmgr_set_features_platform_caps(struct pp_hwmgr *hwmgr)
+{
+	if (amdgpu_sclk_deep_sleep_en)
+		phm_cap_set(hwmgr->platform_descriptor.platformCaps,
+			PHM_PlatformCaps_SclkDeepSleep);
+	else
+		phm_cap_unset(hwmgr->platform_descriptor.platformCaps,
+			PHM_PlatformCaps_SclkDeepSleep);
+
+	if (amdgpu_powercontainment)
+		phm_cap_set(hwmgr->platform_descriptor.platformCaps,
+			    PHM_PlatformCaps_PowerContainment);
+	else
+		phm_cap_unset(hwmgr->platform_descriptor.platformCaps,
+			    PHM_PlatformCaps_PowerContainment);
+
+	return 0;
+}
+
 int hwmgr_init(struct amd_pp_init *pp_init, struct pp_instance *handle)
 {
 	struct pp_hwmgr *hwmgr;
@@ -60,7 +79,8 @@ int hwmgr_init(struct amd_pp_init *pp_init, struct pp_instance *handle)
 	hwmgr->hw_revision = pp_init->rev_id;
 	hwmgr->usec_timeout = AMD_MAX_USEC_TIMEOUT;
 	hwmgr->power_source = PP_PowerSource_AC;
-	hwmgr->powercontainment_enabled = pp_init->powercontainment_enabled;
+
+	hwmgr_set_features_platform_caps(hwmgr);
 
 	switch (hwmgr->chip_family) {
 	case AMDGPU_FAMILY_CZ:
drivers/gpu/drm/amd/powerplay/hwmgr/iceland_powertune.c +2 -3
index d10cd9f..041e964 100644
@@ -137,9 +137,8 @@ void iceland_initialize_power_tune_defaults(struct pp_hwmgr *hwmgr)
 
 		data->fast_watermark_threshold = 100;
 
-		if (hwmgr->powercontainment_enabled) {
-			phm_cap_set(hwmgr->platform_descriptor.platformCaps,
-				    PHM_PlatformCaps_PowerContainment);
+		if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps,
+					PHM_PlatformCaps_PowerContainment)) {
 			tmp = 1;
 			data->enable_dte_feature = tmp ? false : true;
 			data->enable_tdc_limit_feature = tmp ? true : false;
drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c +0 -10
index c81e8a5..f815ec3 100644
@@ -2776,9 +2776,6 @@ int polaris10_set_features_platform_caps(struct pp_hwmgr *hwmgr)
 	struct polaris10_hwmgr *data = (struct polaris10_hwmgr *)(hwmgr->backend);
 
 	phm_cap_set(hwmgr->platform_descriptor.platformCaps,
-			PHM_PlatformCaps_SclkDeepSleep);
-
-	phm_cap_set(hwmgr->platform_descriptor.platformCaps,
 		PHM_PlatformCaps_DynamicPatchPowerState);
 
 	if (data->mvdd_control == POLARIS10_VOLTAGE_CONTROL_NONE)
@@ -2823,13 +2820,6 @@ int polaris10_set_features_platform_caps(struct pp_hwmgr *hwmgr)
 	phm_cap_set(hwmgr->platform_descriptor.platformCaps,
 						PHM_PlatformCaps_TCPRamping);
 
-	if (hwmgr->powercontainment_enabled)
-		phm_cap_set(hwmgr->platform_descriptor.platformCaps,
-			    PHM_PlatformCaps_PowerContainment);
-	else
-		phm_cap_unset(hwmgr->platform_descriptor.platformCaps,
-			    PHM_PlatformCaps_PowerContainment);
-
 	phm_cap_set(hwmgr->platform_descriptor.platformCaps,
 							PHM_PlatformCaps_CAC);
 
drivers/gpu/drm/amd/powerplay/inc/amd_powerplay.h +1 -1
index b764c8c..ba29a5b 100644
@@ -132,8 +132,8 @@ struct amd_pp_init {
 	uint32_t chip_family;
 	uint32_t chip_id;
 	uint32_t rev_id;
-	bool powercontainment_enabled;
 };
+
 enum amd_pp_display_config_type{
 	AMD_PP_DisplayConfigType_None = 0,
 	AMD_PP_DisplayConfigType_DP54 ,
drivers/gpu/drm/amd/powerplay/inc/hwmgr.h +3 -1
index bf0d2ac..911081c 100644
@@ -41,6 +41,9 @@ struct phm_fan_speed_info;
 struct pp_atomctrl_voltage_table;
 
 
+extern int amdgpu_powercontainment;
+extern int amdgpu_sclk_deep_sleep_en;
+
 enum DISPLAY_GAP {
 	DISPLAY_GAP_VBLANK_OR_WM = 0,   /* Wait for vblank or MCHG watermark. */
 	DISPLAY_GAP_VBLANK       = 1,   /* Wait for vblank. */
@@ -614,7 +617,6 @@ struct pp_hwmgr {
 	uint32_t num_ps;
 	struct pp_thermal_controller_info thermal_controller;
 	bool fan_ctrl_is_in_default_mode;
-	bool powercontainment_enabled;
 	uint32_t fan_ctrl_default_mode;
 	uint32_t tmin;
 	struct phm_microcode_version_info microcode_version_info;
Signature · 6 lines
1.9.1

_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
author
#3 lore raw

PATCH 3/4 drm/amdgpu: use modules parameter to ctrl deep sleep feature in dpm

In reply to a message not in the archive
Change-Id I44a5a7fef33fdb1dce9e5f753d45c982f8743c08
---
 drivers/gpu/drm/amd/amdgpu/amdgpu.h | 1 +
 drivers/gpu/drm/amd/amdgpu/ci_dpm.c | 5 ++++-
 drivers/gpu/drm/amd/amdgpu/cz_dpm.c | 6 +++++-
 drivers/gpu/drm/amd/amdgpu/kv_dpm.c | 6 +++++-
 4 files changed, 15 insertions(+), 3 deletions(-)
drivers/gpu/drm/amd/amdgpu/amdgpu.h +1 -0
index d406ec7..42b9560 100644
@@ -92,6 +92,7 @@ extern unsigned amdgpu_pcie_gen_cap;
 extern unsigned amdgpu_pcie_lane_cap;
 extern unsigned amdgpu_cg_mask;
 extern unsigned amdgpu_pg_mask;
+extern int amdgpu_sclk_deep_sleep_en;
 
 #define AMDGPU_WAIT_IDLE_TIMEOUT_IN_MS	        3000
 #define AMDGPU_MAX_USEC_TIMEOUT			100000	/* 100 ms */
drivers/gpu/drm/amd/amdgpu/ci_dpm.c +4 -1
index 5d4ec41..98ec65b 100644
@@ -5873,7 +5873,10 @@ static int ci_dpm_init(struct amdgpu_device *adev)
 	pi->pcie_dpm_key_disabled = 0;
 	pi->thermal_sclk_dpm_enabled = 0;
 
-	pi->caps_sclk_ds = true;
+	if (amdgpu_sclk_deep_sleep_en)
+		pi->caps_sclk_ds = true;
+	else
+		pi->caps_sclk_ds = false;
 
 	pi->mclk_strobe_mode_threshold = 40000;
 	pi->mclk_stutter_mode_threshold = 40000;
drivers/gpu/drm/amd/amdgpu/cz_dpm.c +5 -1
index 8ba07e7..74afb63 100644
@@ -435,7 +435,11 @@ static int cz_dpm_init(struct amdgpu_device *adev)
 		pi->caps_td_ramping = true;
 		pi->caps_tcp_ramping = true;
 	}
-	pi->caps_sclk_ds = true;
+	if (amdgpu_sclk_deep_sleep_en)
+		pi->caps_sclk_ds = true;
+	else
+		pi->caps_sclk_ds = false;
+
 	pi->voting_clients = 0x00c00033;
 	pi->auto_thermal_throttling_enabled = true;
 	pi->bapm_enabled = false;
drivers/gpu/drm/amd/amdgpu/kv_dpm.c +5 -1
index a845e88..f8618a3 100644
@@ -2845,7 +2845,11 @@ static int kv_dpm_init(struct amdgpu_device *adev)
 		pi->caps_tcp_ramping = true;
 	}
 
-	pi->caps_sclk_ds = true;
+	if (amdgpu_sclk_deep_sleep_en)
+		pi->caps_sclk_ds = true;
+	else
+		pi->caps_sclk_ds = false;
+
 	pi->enable_auto_thermal_throttling = true;
 	pi->disable_nb_ps3_in_battery = false;
 	if (amdgpu_bapm == 0)
Signature · 6 lines
1.9.1

_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
author
#4 lore raw

PATCH 4/4 drm/amd/powerplay: not change uvd/vce block's state when initialize/resume

In reply to a message not in the archive
Change-Id I6e338a5faeb023b13bb450ecb1c4bb3eaa3b0ac5
---
 drivers/gpu/drm/amd/powerplay/eventmgr/eventactionchains.c | 2 --
 1 file changed, 2 deletions(-)
drivers/gpu/drm/amd/powerplay/eventmgr/eventactionchains.c +0 -2
index d6635cc..635fc4b 100644
@@ -30,7 +30,6 @@ static const pem_event_action * const initialize_event[] = {
 	system_config_tasks,
 	setup_asic_tasks,
 	enable_dynamic_state_management_tasks,
-	enable_clock_power_gatings_tasks,
 	get_2d_performance_state_tasks,
 	set_performance_state_tasks,
 	initialize_thermal_controller_tasks,
@@ -140,7 +139,6 @@ static const pem_event_action * const resume_event[] = {
 	setup_asic_tasks,
 	enable_stutter_mode_tasks, /*must do this in boot state and before SMC is started */
 	enable_dynamic_state_management_tasks,
-	enable_clock_power_gatings_tasks,
 	enable_disable_bapm_tasks,
 	initialize_thermal_controller_tasks,
 	get_2d_performance_state_tasks,
Signature · 6 lines
1.9.1

_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

A message that is not in the archive (sent off-list or not yet received): 1469699605-13978-4-git-send-email-Rex.Zhu-5C7GfCeVMHo@public.gmane.org

Reviewed-by Alex Deucher
#6 lore raw

RE: [PATCH 4/4] drm/amd/powerplay: not change uvd/vce block's state when initialize/resume

Quoted 11 lines

-----Original Message-----
From: amd-gfx [mailto:[email protected]] On Behalf Of Rex Zhu
Sent: Thursday, July 28, 2016 5:53 AM
To: [email protected]
Cc: Zhu, Rex
Subject: [PATCH 4/4] drm/amd/powerplay: not change uvd/vce block's state when initialize/resume

Change-Id I6e338a5faeb023b13bb450ecb1c4bb3eaa3b0ac5

For the series:

Quoted 31 lines
---
 drivers/gpu/drm/amd/powerplay/eventmgr/eventactionchains.c | 2 --
 1 file changed, 2 deletions(-)
drivers/gpu/drm/amd/powerplay/eventmgr/eventactionchains.c +0 -1
index d6635cc..635fc4b 100644
@@ -30,7 +30,6 @@ static const pem_event_action * const initialize_event[]
 = {
 	system_config_tasks,
 	setup_asic_tasks,
 	enable_dynamic_state_management_tasks,
-	enable_clock_power_gatings_tasks,
 	get_2d_performance_state_tasks,
 	set_performance_state_tasks,
drivers/gpu/drm/amd/powerplay/eventmgr/eventactionchains.c +0 -0
 	initialize_thermal_controller_tasks,
@@ -140,7 +139,6 @@ static const pem_event_action * const
 resume_event[] = {
 	setup_asic_tasks,
 	enable_stutter_mode_tasks, /*must do this in boot state and before

SMC is started */

drivers/gpu/drm/amd/powerplay/eventmgr/eventactionchains.c +0 -2
 	enable_dynamic_state_management_tasks,
-	enable_clock_power_gatings_tasks,
 	enable_disable_bapm_tasks,
 	initialize_thermal_controller_tasks,
 	get_2d_performance_state_tasks,
--

1.9.1

Quoted 4 lines

_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

A message that is not in the archive (sent off-list or not yet received): CY4PR12MB13018F6728959608E2BF7A91F7000-rpdhrqHFk05CiBuckNFh9wdYzm3356FpvxpqHgZTriW3zl9H0oFU5g@public.gmane.org

Reviewed-by Alex Deucher
#8 lore raw

Re: [PATCH 4/4] drm/amd/powerplay: not change uvd/vce block's state when initialize/resume

Um, I had this in my worktree ... so uh do I drop it from mine or what?

Tom

________________________________
From: amd-gfx <amd-gfx-bounces-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org> on behalf of Deucher, Alexander <[email protected]>
Sent: Thursday, July 28, 2016 09:48
To: Zhu, Rex; [email protected]
Cc: Zhu, Rex
Subject: RE: [PATCH 4/4] drm/amd/powerplay: not change uvd/vce block's state when initialize/resume

Quoted 11 lines

-----Original Message-----
From: amd-gfx [mailto:amd-gfx-bounces-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org] On Behalf Of Rex Zhu
Sent: Thursday, July 28, 2016 5:53 AM
To: [email protected]
Cc: Zhu, Rex
Subject: [PATCH 4/4] drm/amd/powerplay: not change uvd/vce block's state
when initialize/resume

Change-Id I6e338a5faeb023b13bb450ecb1c4bb3eaa3b0ac5

For the series:

Quoted 31 lines
---
 drivers/gpu/drm/amd/powerplay/eventmgr/eventactionchains.c | 2 --
 1 file changed, 2 deletions(-)
drivers/gpu/drm/amd/powerplay/eventmgr/eventactionchains.c +0 -1
index d6635cc..635fc4b 100644
@@ -30,7 +30,6 @@ static const pem_event_action * const initialize_event[]
 = {
       system_config_tasks,
       setup_asic_tasks,
       enable_dynamic_state_management_tasks,
-     enable_clock_power_gatings_tasks,
       get_2d_performance_state_tasks,
       set_performance_state_tasks,

initialize_thermal_controller_tasks,

drivers/gpu/drm/amd/powerplay/eventmgr/eventactionchains.c +0 -0
@@ -140,7 +139,6 @@ static const pem_event_action * const
 resume_event[] = {
       setup_asic_tasks,
       enable_stutter_mode_tasks, /*must do this in boot state and before

SMC is started */
enable_dynamic_state_management_tasks,
- enable_clock_power_gatings_tasks,
enable_disable_bapm_tasks,
initialize_thermal_controller_tasks,
get_2d_performance_state_tasks,
--
1.9.1

Quoted 4 lines

_______________________________________________
amd-gfx mailing list [email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

_______________________________________________
amd-gfx mailing list [email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

A message that is not in the archive (sent off-list or not yet received): DM5PR12MB11325426775E3913A47F7908F7000-2J9CzHegvk+UzrhdoDeimQdYzm3356FpvxpqHgZTriW3zl9H0oFU5g@public.gmane.org

Reviewed-by Alex Deucher
#10 lore raw

RE: [PATCH 4/4] drm/amd/powerplay: not change uvd/vce block's state when initialize/resume

Whoever commits it first wins ;)

From: StDenis, Tom
Sent: Thursday, July 28, 2016 10:13 AM
To: Deucher, Alexander; Zhu, Rex; [email protected]
Subject: Re: [PATCH 4/4] drm/amd/powerplay: not change uvd/vce block's state when initialize/resume

Um, I had this in my worktree ... so uh do I drop it from mine or what?

Tom

________________________________
From: amd-gfx <amd-gfx-bounces-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org<mailto:[email protected]>> on behalf of Deucher, Alexander <[email protected]<mailto:[email protected]>>
Sent: Thursday, July 28, 2016 09:48
To: Zhu, Rex; [email protected]<mailto:[email protected]>
Cc: Zhu, Rex
Subject: RE: [PATCH 4/4] drm/amd/powerplay: not change uvd/vce block's state when initialize/resume

Quoted 11 lines

-----Original Message-----
From: amd-gfx [mailto:amd-gfx-bounces-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org] On Behalf
Of Rex Zhu
Sent: Thursday, July 28, 2016 5:53 AM
To: [email protected]<mailto:[email protected]>
Cc: Zhu, Rex
Subject: [PATCH 4/4] drm/amd/powerplay: not change uvd/vce block's state
when initialize/resume

Change-Id I6e338a5faeb023b13bb450ecb1c4bb3eaa3b0ac5

For the series:

Quoted 31 lines
---
 drivers/gpu/drm/amd/powerplay/eventmgr/eventactionchains.c | 2 --
 1 file changed, 2 deletions(-)
drivers/gpu/drm/amd/powerplay/eventmgr/eventactionchains.c +0 -1
index d6635cc..635fc4b 100644
@@ -30,7 +30,6 @@ static const pem_event_action * const initialize_event[]
 = {
       system_config_tasks,
       setup_asic_tasks,
       enable_dynamic_state_management_tasks,
-     enable_clock_power_gatings_tasks,
       get_2d_performance_state_tasks,
       set_performance_state_tasks,

initialize_thermal_controller_tasks,

drivers/gpu/drm/amd/powerplay/eventmgr/eventactionchains.c +0 -0
@@ -140,7 +139,6 @@ static const pem_event_action * const
 resume_event[] = {
       setup_asic_tasks,
       enable_stutter_mode_tasks, /*must do this in boot state and before

SMC is started */
enable_dynamic_state_management_tasks,
- enable_clock_power_gatings_tasks,
enable_disable_bapm_tasks,
initialize_thermal_controller_tasks,
get_2d_performance_state_tasks,
--
1.9.1

Quoted 4 lines

_______________________________________________
amd-gfx mailing list [email protected]<mailto:[email protected]>
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

_______________________________________________
amd-gfx mailing list [email protected]<mailto:[email protected]>
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

A message that is not in the archive (sent off-list or not yet received): CY4PR12MB130129B7D12B803A88142219F7000-rpdhrqHFk05CiBuckNFh9wdYzm3356FpvxpqHgZTriW3zl9H0oFU5g@public.gmane.org

Reviewed-by Alex Deucher
#12 lore raw

Re: [PATCH 4/4] drm/amd/powerplay: not change uvd/vce block's state when initialize/resume

Well I'll submit my patches momentarily and if Rex hasn't pushed his by then I'll push mine.

Tom

________________________________
From: Deucher, Alexander
Sent: Thursday, July 28, 2016 10:17
To: StDenis, Tom; Zhu, Rex; [email protected]
Subject: RE: [PATCH 4/4] drm/amd/powerplay: not change uvd/vce block's state when initialize/resume

Whoever commits it first wins ;)

From: StDenis, Tom
Sent: Thursday, July 28, 2016 10:13 AM
To: Deucher, Alexander; Zhu, Rex; [email protected]
Subject: Re: [PATCH 4/4] drm/amd/powerplay: not change uvd/vce block's state when initialize/resume

Um, I had this in my worktree ... so uh do I drop it from mine or what?

Tom

________________________________

From: amd-gfx <amd-gfx-bounces-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org<mailto:[email protected]>> on behalf of Deucher, Alexander <[email protected]<mailto:[email protected]>>
Sent: Thursday, July 28, 2016 09:48
To: Zhu, Rex; [email protected]<mailto:[email protected]>
Cc: Zhu, Rex
Subject: RE: [PATCH 4/4] drm/amd/powerplay: not change uvd/vce block's state when initialize/resume

Quoted 11 lines

-----Original Message-----
From: amd-gfx [mailto:amd-gfx-bounces-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org] On Behalf
Of Rex Zhu
Sent: Thursday, July 28, 2016 5:53 AM
To: [email protected]<mailto:[email protected]>
Cc: Zhu, Rex
Subject: [PATCH 4/4] drm/amd/powerplay: not change uvd/vce block's state
when initialize/resume

Change-Id I6e338a5faeb023b13bb450ecb1c4bb3eaa3b0ac5

For the series:

Quoted 31 lines
---
 drivers/gpu/drm/amd/powerplay/eventmgr/eventactionchains.c | 2 --
 1 file changed, 2 deletions(-)
drivers/gpu/drm/amd/powerplay/eventmgr/eventactionchains.c +0 -1
index d6635cc..635fc4b 100644
@@ -30,7 +30,6 @@ static const pem_event_action * const initialize_event[]
 = {
       system_config_tasks,
       setup_asic_tasks,
       enable_dynamic_state_management_tasks,
-     enable_clock_power_gatings_tasks,
       get_2d_performance_state_tasks,
       set_performance_state_tasks,

initialize_thermal_controller_tasks,

drivers/gpu/drm/amd/powerplay/eventmgr/eventactionchains.c +0 -0
@@ -140,7 +139,6 @@ static const pem_event_action * const
 resume_event[] = {
       setup_asic_tasks,
       enable_stutter_mode_tasks, /*must do this in boot state and before

SMC is started */
enable_dynamic_state_management_tasks,
- enable_clock_power_gatings_tasks,
enable_disable_bapm_tasks,
initialize_thermal_controller_tasks,
get_2d_performance_state_tasks,
--
1.9.1

Quoted 4 lines

_______________________________________________
amd-gfx mailing list [email protected]<mailto:[email protected]>
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

_______________________________________________
amd-gfx mailing list [email protected]<mailto:[email protected]>
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx