ath10k: Allow setting coverage class
v2 cover ath10k: Allow setting coverage class
Hi,
a new version of the patch which is based on top of the wake_tx_queue work and also the work from Vasanthakumar which adds the rx descriptor abstraction. The patch set is incomplete in the sense that it doesn't update the later patches from Vasanthakumar and would break them as is.
Benjamin Berg (2):
ath10k: Rename hw_rx_desc_ops to hw_ops to use it for other purposes
ath10k: Allow setting coverage class
drivers/net/wireless/ath/ath10k/core.c | 24 +++---- drivers/net/wireless/ath/ath10k/core.h | 10 +++ drivers/net/wireless/ath/ath10k/hw.c | 116 ++++++++++++++++++++++++++++++++- drivers/net/wireless/ath/ath10k/hw.h | 30 +++++++-- drivers/net/wireless/ath/ath10k/mac.c | 19 ++++++ drivers/net/wireless/ath/ath10k/wmi.c | 29 +++++++++ 6 files changed, 209 insertions(+), 19 deletions(-)
Signature · 7 lines
2.8.1 _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
PATCH v2 1/2 ath10k: Rename hw_rx_desc_ops to hw_ops to use it for other purposes
The structure contains hardware specific operations. Rename the struct so that it is appropriate to be used for other operations.
--- drivers/net/wireless/ath/ath10k/core.c | 24 ++++++++++++------------ drivers/net/wireless/ath/ath10k/hw.c | 4 ++-- drivers/net/wireless/ath/ath10k/hw.h | 8 ++++---- 3 files changed, 18 insertions(+), 18 deletions(-)
drivers/net/wireless/ath/ath10k/core.c +12 -12
@@ -68,7 +68,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .board_size = QCA988X_BOARD_DATA_SZ, .board_ext_size = QCA988X_BOARD_EXT_DATA_SZ, }, - .hw_rx_desc_ops = &qca988x_rx_desc_ops, + .hw_ops = &qca988x_ops, }, { .id = QCA9887_HW_1_0_VERSION,
@@ -88,7 +88,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .board_size = QCA9887_BOARD_DATA_SZ, .board_ext_size = QCA9887_BOARD_EXT_DATA_SZ, }, - .hw_rx_desc_ops = &qca988x_rx_desc_ops, + .hw_ops = &qca988x_ops, }, { .id = QCA6174_HW_2_1_VERSION,
@@ -106,7 +106,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .board_size = QCA6174_BOARD_DATA_SZ, .board_ext_size = QCA6174_BOARD_EXT_DATA_SZ, }, - .hw_rx_desc_ops = &qca988x_rx_desc_ops, + .hw_ops = &qca988x_ops, }, { .id = QCA6174_HW_2_1_VERSION,
@@ -125,7 +125,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .board_size = QCA6174_BOARD_DATA_SZ, .board_ext_size = QCA6174_BOARD_EXT_DATA_SZ, }, - .hw_rx_desc_ops = &qca988x_rx_desc_ops, + .hw_ops = &qca988x_ops, }, { .id = QCA6174_HW_3_0_VERSION,
@@ -144,7 +144,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .board_size = QCA6174_BOARD_DATA_SZ, .board_ext_size = QCA6174_BOARD_EXT_DATA_SZ, }, - .hw_rx_desc_ops = &qca988x_rx_desc_ops, + .hw_ops = &qca988x_ops, }, { .id = QCA6174_HW_3_2_VERSION,
@@ -164,7 +164,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .board_size = QCA6174_BOARD_DATA_SZ, .board_ext_size = QCA6174_BOARD_EXT_DATA_SZ, }, - .hw_rx_desc_ops = &qca988x_rx_desc_ops, + .hw_ops = &qca988x_ops, }, { .id = QCA99X0_HW_2_0_DEV_VERSION,
@@ -188,7 +188,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .board_size = QCA99X0_BOARD_DATA_SZ, .board_ext_size = QCA99X0_BOARD_EXT_DATA_SZ, }, - .hw_rx_desc_ops = &qca99x0_rx_desc_ops, + .hw_ops = &qca99x0_ops, }, { .id = QCA9984_HW_1_0_DEV_VERSION,
@@ -212,7 +212,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .board_size = QCA99X0_BOARD_DATA_SZ, .board_ext_size = QCA99X0_BOARD_EXT_DATA_SZ, }, - .hw_rx_desc_ops = &qca99x0_rx_desc_ops, + .hw_ops = &qca99x0_ops, }, { .id = QCA9888_HW_2_0_DEV_VERSION,
@@ -235,7 +235,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .board_size = QCA99X0_BOARD_DATA_SZ, .board_ext_size = QCA99X0_BOARD_EXT_DATA_SZ, }, - .hw_rx_desc_ops = &qca99x0_rx_desc_ops, + .hw_ops = &qca99x0_ops, }, { .id = QCA9377_HW_1_0_DEV_VERSION,
@@ -253,7 +253,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .board_size = QCA9377_BOARD_DATA_SZ, .board_ext_size = QCA9377_BOARD_EXT_DATA_SZ, }, - .hw_rx_desc_ops = &qca988x_rx_desc_ops, + .hw_ops = &qca988x_ops, }, { .id = QCA9377_HW_1_1_DEV_VERSION,
@@ -271,7 +271,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .board_size = QCA9377_BOARD_DATA_SZ, .board_ext_size = QCA9377_BOARD_EXT_DATA_SZ, }, - .hw_rx_desc_ops = &qca988x_rx_desc_ops, + .hw_ops = &qca988x_ops, }, { .id = QCA4019_HW_1_0_DEV_VERSION,
@@ -296,7 +296,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .board_size = QCA4019_BOARD_DATA_SZ, .board_ext_size = QCA4019_BOARD_EXT_DATA_SZ, }, - .hw_rx_desc_ops = &qca99x0_rx_desc_ops, + .hw_ops = &qca99x0_ops, }, };
drivers/net/wireless/ath/ath10k/hw.c +2 -2
@@ -220,7 +220,7 @@ void ath10k_hw_fill_survey_time(struct ath10k *ar, struct survey_info *survey, survey->time_busy =CCNT_TO_MSEC (ar, rcc); } -const struct ath10k_hw_rx_desc_ops qca988x_rx_desc_ops = { +const struct ath10k_hw_ops qca988x_ops = { };static int ath10k_qca99x0_rx_desc_get_l3_pad_bytes (struct htt_rx_desc *rxd)
@@ -229,6 +229,6 @@ static int ath10k_qca99x0_rx_desc_get_l3_pad_bytes(struct htt_rx_desc *rxd) RX_MSDU_END_INFO1_L3_HDR_PAD); } -const struct ath10k_hw_rx_desc_ops qca99x0_rx_desc_ops = { +const struct ath10k_hw_ops qca99x0_ops = { .rx_desc_get_l3_pad_bytes = ath10k_qca99x0_rx_desc_get_l3_pad_bytes, };
drivers/net/wireless/ath/ath10k/hw.h +4 -4
@@ -410,18 +410,18 @@ struct ath10k_hw_params {size_t board_ext_size; } fw; -const struct ath10k_hw_rx_desc_ops *hw_rx_desc_ops; +const struct ath10k_hw_ops *hw_ops; };struct htt_rx_desc ;/* Defines needed for Rx descriptor abstraction */ -struct ath10k_hw_rx_desc_ops { +struct ath10k_hw_ops {int (*rx_desc_get_l3_pad_bytes)(struct htt_rx_desc *rxd); }; -extern const struct ath10k_hw_rx_desc_ops qca988x_rx_desc_ops; -extern const struct ath10k_hw_rx_desc_ops qca99x0_rx_desc_ops; +extern const struct ath10k_hw_ops qca988x_ops; +extern const struct ath10k_hw_ops qca99x0_ops;/* Target specific defines for MAIN firmware */ #define TARGET_NUM_VDEVS 8
Signature · 7 lines
2.8.1 _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
PATCH v2 2/2 ath10k: Allow setting coverage class
In reply to Benjamin BergUnfortunately ath10k does not generally allow modifying the coverage class with the stock firmware and Qualcomm has so far refused to implement this feature so that it can be properly supported in ath10k. If we however know the registers that need to be modified for proper operation with a higher coverage class, then we can do these modifications from the driver.
This patch implements this hack for first generation cards which are based on a core that is similar to ath9k. The registers are modified in place and need to be re-written every time the firmware sets them. To achieve this the register status is verified after any WMI event from the firmware.
The coverage class may not be modified temporarily right after the card re-initializes the registers. This is for example the case during scanning.
Thanks to Sebastian Gottschall <[email protected]> for initially working on a userspace support for this. This patch wouldn't have been possible without this documentation.
--- drivers/net/wireless/ath/ath10k/core.h | 10 +++ drivers/net/wireless/ath/ath10k/hw.c | 112 +++++++++++++++++++++++++++++++++ drivers/net/wireless/ath/ath10k/hw.h | 22 ++++++- drivers/net/wireless/ath/ath10k/mac.c | 19 ++++++ drivers/net/wireless/ath/ath10k/wmi.c | 29 +++++++++ 5 files changed, 191 insertions(+), 1 deletion(-)
drivers/net/wireless/ath/ath10k/core.h +10 -0
@@ -890,6 +890,16 @@ struct ath10k {struct ath10k_thermal thermal;struct ath10k_wow wow; +/* protected by data_lock */ +struct { +s16 coverage_class; + +u32 reg_slottime_conf; +u32 reg_slottime_orig; +u32 reg_ack_cts_timeout_conf; +u32 reg_ack_cts_timeout_orig; + } fw_coverage; +/* must be last */ u8 drv_priv[0 ]__aligned(sizeof(void *)) ; };
drivers/net/wireless/ath/ath10k/hw.c +112 -0
148 lines not on this page · raw message
drivers/net/wireless/ath/ath10k/hw.h +21 -1
@@ -230,6 +230,7 @@ struct ath10k_hw_regs {u32 rtc_soc_base_address;u32 rtc_wmac_base_address;u32 soc_core_base_address; +u32 wlan_mac_base_address;u32 ce_wrapper_base_address;u32 ce0_base_address;u32 ce1_base_address;
@@ -418,6 +419,7 @@ struct htt_rx_desc;/* Defines needed for Rx descriptor abstraction */ struct ath10k_hw_ops {int (*rx_desc_get_l3_pad_bytes)(struct htt_rx_desc *rxd); +void (*mac_op_set_coverage_class)(struct ath10k *ar,s16 value); };extern const struct ath10k_hw_ops qca988x_ops;
@@ -605,7 +607,7 @@ extern const struct ath10k_hw_ops qca99x0_ops;#define WLAN_SI_BASE_ADDRESS 0x00010000#define WLAN_GPIO_BASE_ADDRESS 0x00014000#define WLAN_ANALOG_INTF_BASE_ADDRESS 0x0001c000 -#define WLAN_MAC_BASE_ADDRESS 0x00020000 +#define WLAN_MAC_BASE_ADDRESS ar->regs->wlan_mac_base_address#define EFUSE_BASE_ADDRESS 0x00030000#define FPGA_REG_BASE_ADDRESS 0x00039000#define WLAN_UART2_BASE_ADDRESS 0x00054c00
@@ -805,4 +807,22 @@ extern const struct ath10k_hw_ops qca99x0_ops;#define RTC_STATE_V_GET (x) (((x) & RTC_STATE_V_MASK) >> RTC_STATE_V_LSB) +/* Register definitions for first generation ath10k cards. These cards include +* a mac thich has a register allocation similar to ath9k and at least some +* registers including the ones relevant for modifying the coverage class are +* identical to the ath9k definitions. +* These registers are usually managed by the ath10k firmware. However by +* overriding them it is possible to support coverage class modifications. +*/ +#define WAVE1_PCU_ACK_CTS_TIMEOUT 0x8014 +#define WAVE1_PCU_ACK_CTS_TIMEOUT_MAX 0x00003FFF +#define WAVE1_PCU_ACK_CTS_TIMEOUT_ACK 0x00003FFF +#define WAVE1_PCU_ACK_CTS_TIMEOUT_ACK_S 0 +#define WAVE1_PCU_ACK_CTS_TIMEOUT_CTS 0x3FFF0000 +#define WAVE1_PCU_ACK_CTS_TIMEOUT_CTS_S 16 + +#define WAVE1_PCU_GBL_IFS_SLOT 0x1070 +#define WAVE1_PCU_GBL_IFS_SLOT_M 0x0000FFFF +#define WAVE1_PCU_GBL_IFS_SLOT_RESV0 0xFFFF0000 +#endif /* _HW_H_ */
drivers/net/wireless/ath/ath10k/mac.c +19 -0
@@ -5372,6 +5372,20 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,mutex_unlock (&ar->conf_mutex); } +static void ath10k_mac_op_set_coverage_class (struct ieee80211_hw *hw,s16 value) +{ +struct ath10k *ar = hw->priv; + +/* This function should never be called if setting the coverage class +* is not supported on this hardware. +*/ +if (!ar->hw_params.hw_ops->mac_op_set_coverage_class) { +WARN_ON_ONCE (1 ); +return ; + } + ar->hw_params.hw_ops->mac_op_set_coverage_class (ar, value); +} +static int ath10k_hw_scan (struct ieee80211_hw *hw,struct ieee80211_vif *vif,struct ieee80211_scan_request *hw_req)
@@ -7397,6 +7411,7 @@ static const struct ieee80211_ops ath10k_ops = { .remove_interface = ath10k_remove_interface, .configure_filter = ath10k_configure_filter, .bss_info_changed = ath10k_bss_info_changed, + .set_coverage_class = ath10k_mac_op_set_coverage_class, .hw_scan = ath10k_hw_scan, .cancel_hw_scan = ath10k_cancel_hw_scan, .set_key = ath10k_set_key,
@@ -7974,6 +7989,10 @@ int ath10k_mac_register(struct ath10k *ar) ar->running_fw->fw_file.fw_features)) ar->ops->wake_tx_queue =NULL ; +/* Disable set_coverage_class for chipsets that do not support it. */ +if (!ar->hw_params.hw_ops->mac_op_set_coverage_class) + ar->ops->set_coverage_class =NULL ; + ret =ath_regd_init (&ar->ath_common.regulatory, ar->hw->wiphy, ath10k_reg_notifier);if (ret) {
drivers/net/wireless/ath/ath10k/wmi.c +29 -0
@@ -4992,6 +4992,13 @@ static void ath10k_wmi_op_rx(struct ath10k *ar, struct sk_buff *skb)break ; } +/* Check and possibly reset the coverage class configuration override. +* There are many conditions (in particular internal card resets) that +* can cause the registers to be re-initialized. +*/ +if (!ar->hw_params.hw_ops->mac_op_set_coverage_class) + ar->hw_params.hw_ops->mac_op_set_coverage_class (ar,-1 ); + out:dev_kfree_skb (skb); }
@@ -5116,6 +5123,13 @@ static void ath10k_wmi_10_1_op_rx(struct ath10k *ar, struct sk_buff *skb)break ; } +/* Check and possibly reset the coverage class configuration override. +* There are many conditions (in particular internal card resets) that +* can cause the registers to be re-initialized. +*/ +if (!ar->hw_params.hw_ops->mac_op_set_coverage_class) + ar->hw_params.hw_ops->mac_op_set_coverage_class (ar,-1 ); + out:dev_kfree_skb (skb); }
@@ -5240,6 +5254,13 @@ static void ath10k_wmi_10_2_op_rx(struct ath10k *ar, struct sk_buff *skb)break ; } +/* Check and possibly reset the coverage class configuration override. +* There are many conditions (in particular internal card resets) that +* can cause the registers to be re-initialized. +*/ +if (!ar->hw_params.hw_ops->mac_op_set_coverage_class) + ar->hw_params.hw_ops->mac_op_set_coverage_class (ar,-1 ); + out:dev_kfree_skb (skb); }
@@ -5323,6 +5344,13 @@ static void ath10k_wmi_10_4_op_rx(struct ath10k *ar, struct sk_buff *skb)break ; } +/* Check and possibly reset the coverage class configuration override. +* There are many conditions (in particular internal card resets) that +* can cause the registers to be re-initialized. +*/ +if (!ar->hw_params.hw_ops->mac_op_set_coverage_class) + ar->hw_params.hw_ops->mac_op_set_coverage_class (ar,-1 ); + out:dev_kfree_skb (skb); }
@@ -6017,6 +6045,7 @@ void ath10k_wmi_start_scan_init(struct ath10k *ar, | WMI_SCAN_EVENT_COMPLETED |WMI_SCAN_EVENT_BSS_CHANNEL |WMI_SCAN_EVENT_FOREIGN_CHANNEL + |WMI_SCAN_EVENT_FOREIGN_CHANNEL_EXIT |WMI_SCAN_EVENT_DEQUEUED ; arg->scan_ctrl_flags |=WMI_SCAN_CHAN_STAT_EVENT ; arg->n_bssids =1 ;
Signature · 7 lines
2.8.1 _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
Quoted 93 lines · Benjamin Berg
Unfortunately ath10k does not generally allow modifying the coverage class with the stock firmware and Qualcomm has so far refused to implement this feature so that it can be properly supported in ath10k. If we however know the registers that need to be modified for proper operation with a higher coverage class, then we can do these modifications from the driver.
This patch implements this hack for first generation cards which are based on a core that is similar to ath9k. The registers are modified in place and need to be re-written every time the firmware sets them. To achieve this the register status is verified after any WMI event from the firmware.
The coverage class may not be modified temporarily right after the card re-initializes the registers. This is for example the case during scanning.
Thanks to Sebastian Gottschall <[email protected]> for initially working on a userspace support for this. This patch wouldn't have been possible without this documentation.
Signed-off-by Benjamin Berg <[email protected]>Signed-off-by Simon Wunderlich <[email protected]>Signed-off-by Mathias Kretschmer <[email protected]>--- drivers/net/wireless/ath/ath10k/core.h | 10 +++ drivers/net/wireless/ath/ath10k/hw.c | 112 +++++++++++++++++++++++++++++++++ drivers/net/wireless/ath/ath10k/hw.h | 22 ++++++- drivers/net/wireless/ath/ath10k/mac.c | 19 ++++++ drivers/net/wireless/ath/ath10k/wmi.c | 29 +++++++++ 5 files changed, 191 insertions(+), 1 deletion(-)drivers/net/wireless/ath/ath10k/core.h +10
-0@@ -890,6 +890,16 @@ struct ath10k {struct ath10k_thermal thermal;struct ath10k_wow wow; +/* protected by data_lock */ +struct { +s16 coverage_class; + +u32 reg_slottime_conf; +u32 reg_slottime_orig; +u32 reg_ack_cts_timeout_conf; +u32 reg_ack_cts_timeout_orig; + } fw_coverage; +/* must be last */ u8 drv_priv[0 ]__aligned(sizeof(void *)) ; };drivers/net/wireless/ath/ath10k/hw.c +5
-0@@ -17,11 +17,13 @@#include <linux/types.h> #include "core.h" #include "hw.h" +#include "hif.h" const struct ath10k_hw_regs qca988x_regs = { .rtc_soc_base_address =0x00004000 , .rtc_wmac_base_address =0x00005000 , .soc_core_base_address =0x00009000 , + .wlan_mac_base_address =0x00020000 , .ce_wrapper_base_address =0x00057000 , .ce0_base_address =0x00057400 , .ce1_base_address =0x00057800 ,@@ -48,6 +50,7 @@ const struct ath10k_hw_regs qca6174_regs = { .rtc_soc_base_address = 0x00000800, .rtc_wmac_base_address = 0x00001000, .soc_core_base_address = 0x0003a000, + .wlan_mac_base_address = 0x00020000, .ce_wrapper_base_address = 0x00034000, .ce0_base_address = 0x00034400, .ce1_base_address = 0x00034800,@@ -74,6 +77,7 @@ const struct ath10k_hw_regs qca99x0_regs = { .rtc_soc_base_address = 0x00080000, .rtc_wmac_base_address = 0x00000000, .soc_core_base_address = 0x00082000, + .wlan_mac_base_address = 0x00030000, .ce_wrapper_base_address = 0x0004d000, .ce0_base_address = 0x0004a000, .ce1_base_address = 0x0004a400,@@ -109,6 +113,7 @@ const struct ath10k_hw_regs qca99x0_regs = {const struct ath10k_hw_regs qca4019_regs = { .rtc_soc_base_address =0x00080000 , .soc_core_base_address =0x00082000 , + .wlan_mac_base_address =0x00030000 , .ce_wrapper_base_address =0x0004d000 , .ce0_base_address =0x0004a000 , .ce1_base_address =0x0004a400 ,
drivers/net/wireless/ath/ath10k/hw.c void ath10k_hw_fill_survey_time(struct ath10k *ar, struct survey_info *survey, · line 229
Quoted 5 lines
drivers/net/wireless/ath/ath10k/hw.c +2
-0@@ -220,7 +225,114 @@ void ath10k_hw_fill_survey_time(struct ath10k *ar, struct survey_info *survey, survey->time_busy =CCNT_TO_MSEC (ar, rcc); } +static void ath10k_qca988x_mac_op_set_coverage_class (struct ath10k *ar, +s16 value)
The naming is wrong. The general convention is:
ath10k_{base_filename}_{purpose}
If a function is used as an _ops callback (ieee80211_ops, or wmi_ops) the purpose should start with _ops.
In this case the name should be:
ath10k_hw_qca988x_set_coverage_class()
drivers/net/wireless/ath/ath10k/hw.c void ath10k_hw_fill_survey_time(struct ath10k *ar, struct survey_info *survey, · line 260
Quoted 10 lines
drivers/net/wireless/ath/ath10k/hw.c +10
-0+if (value <0 ) + value = ar->fw_coverage.coverage_class; + +/* Break out if the coverage class and registers have the expected +* value. +*/ +if (value == ar->fw_coverage.coverage_class && + slottime_reg == ar->fw_coverage.reg_slottime_conf && + timeout_reg == ar->fw_coverage.reg_ack_cts_timeout_conf) + goto unlock;
I would move this part to the caller and keep the hardware-specific function just compute and set registers, e.g. have ath10k_mac_set_coverage_class (as opposed to ath10k_mac_op_set_coverage_class). It should also reduce some code duplication.
[...]
Quoted 14 lines
drivers/net/wireless/ath/ath10k/hw.c +0
-0static int ath10k_qca99x0_rx_desc_get_l3_pad_bytes (struct htt_rx_desc *rxd)drivers/net/wireless/ath/ath10k/hw.h +1
-0@@ -230,6 +230,7 @@ struct ath10k_hw_regs {u32 rtc_soc_base_address;u32 rtc_wmac_base_address;u32 soc_core_base_address; +u32 wlan_mac_base_address;u32 ce_wrapper_base_address;u32 ce0_base_address;u32 ce1_base_address;
drivers/net/wireless/ath/ath10k/hw.h struct htt_rx_desc; · line 422
Quoted 4 lines
drivers/net/wireless/ath/ath10k/hw.h +1
-0@@ -418,6 +419,7 @@ struct htt_rx_desc;/* Defines needed for Rx descriptor abstraction */ struct ath10k_hw_ops {int (*rx_desc_get_l3_pad_bytes)(struct htt_rx_desc *rxd); +void (*mac_op_set_coverage_class)(struct ath10k *ar,s16 value);
Just "set_coverage_class" is fine.
[...]
Quoted 5 lines
drivers/net/wireless/ath/ath10k/wmi.c +0
-0
drivers/net/wireless/ath/ath10k/wmi.c static void ath10k_wmi_op_rx(struct ath10k *ar, struct sk_buff *skb) · line 5000
Quoted 9 lines
drivers/net/wireless/ath/ath10k/wmi.c +6
-0@@ -4992,6 +4992,13 @@ static void ath10k_wmi_op_rx(struct ath10k *ar, struct sk_buff *skb)break ; } +/* Check and possibly reset the coverage class configuration override. +* There are many conditions (in particular internal card resets) that +* can cause the registers to be re-initialized. +*/ +if (!ar->hw_params.hw_ops->mac_op_set_coverage_class) + ar->hw_params.hw_ops->mac_op_set_coverage_class (ar,-1 );
As discussed in the other thread - it may be better to implicitly enable dbglog and hook the refresh call there.
Michał
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Quoted 11 lines
drivers/net/wireless/ath/ath10k/hw.c void ath10k_hw_fill_survey_time(struct ath10k *ar, struct survey_info *survey, · line 260
Quoted 11 lines
drivers/net/wireless/ath/ath10k/hw.c +10
-0+if (value <0 ) + value = ar->fw_coverage.coverage_class; + +/* Break out if the coverage class and registers have the expected +* value. +*/ +if (value == ar->fw_coverage.coverage_class && + slottime_reg == ar->fw_coverage.reg_slottime_conf && + timeout_reg == ar->fw_coverage.reg_ack_cts_timeout_conf) + goto unlock;
Quoted 5 lines
I would move this part to the caller and keep the hardware-specific function just compute and set registers, e.g. have
ath10k_mac_set_coverage_class(as opposed toath10k_mac_op_set_coverage_class). It should also reduce some code duplication.
doesnt make sense. i already enhanced this code to support beeliner (99xx) and newers. the code is that much different that this check need to be treaded in a indivudual way reg_slottime_conf is hardware defacto specific since the value is taken from a hardware specific register. you cannot handle this outside this function since other chips have different registers.
Signature · 17 lines
Mit freundlichen Grüssen / Regards Sebastian Gottschall / CTO NewMedia-NET GmbH - DD-WRT Firmensitz: Berliner Ring 101, 64625 Bensheim Registergericht: Amtsgericht Darmstadt, HRB 25473 Geschäftsführer: Peter Steinhäuser, Christian Scheele http://www.dd-wrt.com email: [email protected] Tel.: +496251-582650 / Fax: +496251-5826565 _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
Quoted 19 lines · Sebastian Gottschall
Quoted 13 lines
drivers/net/wireless/ath/ath10k/hw.c void ath10k_hw_fill_survey_time(struct ath10k *ar, struct survey_info *survey, · line 260
Quoted 12 lines
drivers/net/wireless/ath/ath10k/hw.c +4
-0+if (value <0 ) + value = ar->fw_coverage.coverage_class; + +/* Break out if the coverage class and registers have the expected
drivers/net/wireless/ath/ath10k/hw.c +6
-0+* value. +*/ +if (value == ar->fw_coverage.coverage_class && + slottime_reg == ar->fw_coverage.reg_slottime_conf && + timeout_reg == ar->fw_coverage.reg_ack_cts_timeout_conf) + goto unlock;Quoted 5 lines
I would move this part to the caller and keep the hardware-specific function just compute and set registers, e.g. have
ath10k_mac_set_coverage_class(as opposed toath10k_mac_op_set_coverage_class). It should also reduce some code duplication.
Quoted 8 lines
doesnt make sense. i already enhanced this code to support beeliner (99xx) and newers.
the code is that much different that this check need to be treaded in a indivudual wayreg_slottime_confis hardware defacto specific since the value is taken from a hardware specific register.
you cannot handle this outside this function since other chips have different registers.
Ah, you're right, my bad :)
Michał
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Am 04.08.2016 um 07:28 schrieb Michal Kazior:
Quoted 25 lines · Sebastian Gottschall
Quoted 16 lines
Quoted 11 lines
drivers/net/wireless/ath/ath10k/hw.c void ath10k_hw_fill_survey_time(struct ath10k *ar, struct survey_info *survey, · line 260
Quoted 11 lines
drivers/net/wireless/ath/ath10k/hw.c +4
-0+if (value <0 ) + value = ar->fw_coverage.coverage_class; + +/* Break out if the coverage class and registers have the expected
drivers/net/wireless/ath/ath10k/hw.c +6
-0+* value. +*/ +if (value == ar->fw_coverage.coverage_class && + slottime_reg == ar->fw_coverage.reg_slottime_conf && + timeout_reg == ar->fw_coverage.reg_ack_cts_timeout_conf) + goto unlock;Quoted 5 lines
I would move this part to the caller and keep the hardware-specific function just compute and set registers, e.g. have
ath10k_mac_set_coverage_class(as opposed toath10k_mac_op_set_coverage_class). It should also reduce some code duplication.Quoted 8 lines
doesnt make sense. i already enhanced this code to support beeliner (99xx) and newers.
the code is that much different that this check need to be treaded in a indivudual wayreg_slottime_confis hardware defacto specific since the value is taken from a hardware specific register.
you cannot handle this outside this function since other chips have different registers.
Quoted 1 line
Ah, you're right, my bad :)
the current code i sended to benjamin makes several of these vars obsolete anyway. just waiting for his new cleaned up version here on that list.
Quoted 4 lines
Michał
Signature · 17 lines
Mit freundlichen Grüssen / Regards Sebastian Gottschall / CTO NewMedia-NET GmbH - DD-WRT Firmensitz: Berliner Ring 101, 64625 Bensheim Registergericht: Amtsgericht Darmstadt, HRB 25473 Geschäftsführer: Peter Steinhäuser, Christian Scheele http://www.dd-wrt.com email: [email protected] Tel.: +496251-582650 / Fax: +496251-5826565 _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k