patch "USB: serial: ftdi_sio: add device ID for WICED USB UART dev board" added to usb-linus

This is a note to let you know that I've just added the patch titled

USB: serial: ftdi_sio: add device ID for WICED USB UART dev board

to my usb git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git
in the usb-linus branch.

The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.)

The patch will hopefully also be merged in Linus's tree for the next -rc kernel release.

If you have any questions about this process, please let me know.

From: "Sheng-Hui J. Chu" <[email protected]>
Date: Thu, 28 Jul 2016 17:01:45 -0400
Subject: USB: serial: ftdi_sio: add device ID for WICED USB UART dev board

BCM20706V2_EVAL is a WICED dev board designed with FT2232H USB 2.0 UART/FIFO IC.

To support BCM920706V2_EVAL dev board for WICED development on Linux. Add the VID(0a5c) and PID(6422) to ftdi_sio driver to allow loading ftdi_sio for this board.

---
 drivers/usb/serial/ftdi_sio.c     | 1 +
 drivers/usb/serial/ftdi_sio_ids.h | 6 ++++++
 2 files changed, 7 insertions(+)

index 8962cdcfe9ff..b2d767e743fc 100644
@@ -1010,6 +1010,7 @@ static const struct usb_device_id id_table_combined[] = {
 	{ USB_DEVICE(ICPDAS_VID, ICPDAS_I7560U_PID) },
 	{ USB_DEVICE(ICPDAS_VID, ICPDAS_I7561U_PID) },
 	{ USB_DEVICE(ICPDAS_VID, ICPDAS_I7563U_PID) },
+	{ USB_DEVICE(WICED_VID, WICED_USB20706V2_PID) },
 	{ }					/* Terminating entry */
 };
 

index 067e3a6300d1..f87a938cf005 100644
@@ -679,6 +679,12 @@
 #define INTREPID_NEOVI_PID	0x0701
 
 /*
+ * WICED USB UART
+ */
+#define WICED_VID		0x0A5C
+#define WICED_USB20706V2_PID	0x6422
+
+/*
  * Definitions for ID TECH (www.idt-net.com) devices
  */
 #define IDTECH_VID		0x0ACD	/* ID TECH Vendor ID */

2.9.2