Patch "tty/serial: atmel: fix RS485 half duplex with DMA" has been added to the 4.7-stable tree

This is a note to let you know that I've just added the patch titled

tty/serial: atmel: fix RS485 half duplex with DMA

to the 4.7-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
tty-serial-atmel-fix-rs485-half-duplex-with-dma.patch
and it can be found in the queue-4.7 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

From: Alexandre Belloni <[email protected]>
Date: Sat, 28 May 2016 00:54:08 +0200
Subject: tty/serial: atmel: fix RS485 half duplex with DMA

From: Alexandre Belloni <[email protected]>

commit 0058f0871efe7b01c6f2b3046c68196ab73e96da upstream.

When using DMA, half duplex doesn't work properly because rx is not stopped before starting tx. Ensure we call atmel_stop_rx() in the DMA case.

---
 drivers/tty/serial/atmel_serial.c |   14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

@@ -482,19 +482,21 @@ static void atmel_start_tx(struct uart_p
 {
 	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
 
-	if (atmel_use_pdc_tx(port)) {
-		if (atmel_uart_readl(port, ATMEL_PDC_PTSR) & ATMEL_PDC_TXTEN)
-			/* The transmitter is already running.  Yes, we
-			   really need this.*/
-			return;
+	if (atmel_use_pdc_tx(port) && (atmel_uart_readl(port, ATMEL_PDC_PTSR)
+				       & ATMEL_PDC_TXTEN))
+		/* The transmitter is already running.  Yes, we
+		   really need this.*/
+		return;
 
+	if (atmel_use_pdc_tx(port) || atmel_use_dma_tx(port))
 		if ((port->rs485.flags & SER_RS485_ENABLED) &&
 		    !(port->rs485.flags & SER_RS485_RX_DURING_TX))
 			atmel_stop_rx(port);
 
+	if (atmel_use_pdc_tx(port))
 		/* re-enable PDC transmit */
 		atmel_uart_writel(port, ATMEL_PDC_PTCR, ATMEL_PDC_TXTEN);
-	}
+
 	/* Enable interrupts */
 	atmel_uart_writel(port, ATMEL_US_IER, atmel_port->tx_done_mask);
 }

Patches currently in stable-queue which might be from [email protected] are

queue-4.7/usb-gadget-udc-atmel-also-get-regmap-for-at91sam9x5-pmc.patch queue-4.7/tty-serial-atmel-fix-rs485-half-duplex-with-dma.patch