Patch "usb: renesas_usbhs: clear the BRDYSTS in usbhsg_ep_enable()" has been added to the 4.4-stable tree

This is a note to let you know that I've just added the patch titled

usb: renesas_usbhs: clear the BRDYSTS in usbhsg_ep_enable()

to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
usb-renesas_usbhs-clear-the-brdysts-in-usbhsg_ep_enable.patch
and it can be found in the queue-4.4 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

From: Yoshihiro Shimoda <[email protected]>
Date: Mon, 8 Aug 2016 21:50:52 +0900
Subject: usb: renesas_usbhs: clear the BRDYSTS in usbhsg_ep_enable()

From: Yoshihiro Shimoda <[email protected]>

commit 9ab967e6db7412b675ecbff80d5371d53c82cb2e upstream.

This patch fixes an issue that unexpected BRDY interruption happens when the usb_ep_{enable,disable}() are called with different direction. In this case, the driver will cause the following message:

renesas_usbhs e6590000.usb: irq_ready run_error 1 : -16

This issue causes the followings:
1) A pipe is enabled as transmission
2) The pipe sent a data
3) The pipe is disabled and re-enabled as reception.
4) The pipe got a queue

Since the driver doesn't clear the BRDYSTS flags after 2) above, the issue happens. If we add such clearing the flags into the driver, the code will become complicate. So, this patch clears the BRDYSTS flag of reception in usbhsg_ep_enable() to avoid complicate.

---
 drivers/usb/renesas_usbhs/mod_gadget.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

@@ -618,10 +618,13 @@ static int usbhsg_ep_enable(struct usb_e
 		 * use dmaengine if possible.
 		 * It will use pio handler if impossible.
 		 */
-		if (usb_endpoint_dir_in(desc))
+		if (usb_endpoint_dir_in(desc)) {
 			pipe->handler = &usbhs_fifo_dma_push_handler;
-		else
+		} else {
 			pipe->handler = &usbhs_fifo_dma_pop_handler;
+			usbhs_xxxsts_clear(priv, BRDYSTS,
+					   usbhs_pipe_number(pipe));
+		}
 
 		ret = 0;
 	}

Patches currently in stable-queue which might be from [email protected] are

queue-4.4/usb-renesas_usbhs-clear-the-brdysts-in-usbhsg_ep_enable.patch queue-4.4/usb-renesas_usbhs-use-dmac-only-if-the-pipe-type-is-bulk.patch