Staging: comedi: ni_daq_dio24.c: Fix block comments use * on subsequent lines.
PATCH 1/1 Staging: comedi: ni_daq_dio24.c: Fix block comments use * on subsequent lines.
This is a patch to the ni_daq_dio24.c that fixes checkpatch warning:
WARNING: Block comments use * on subsequent lines
--- drivers/staging/comedi/comedidev.h | 8 ++--- drivers/staging/comedi/drivers/ni_daq_dio24.c | 52 +++++++++++++-------------- 2 files changed, 30 insertions(+), 30 deletions(-)
drivers/staging/comedi/comedidev.h +4 -4
@@ -582,7 +582,7 @@ int comedi_check_chanlist(struct comedi_subdevice *s,#define RANGE (a, b) {(a) * 1e6, (b) * 1e6, 0}#define RANGE_ext (a, b) {(a) * 1e6, (b) * 1e6, RF_EXTERNAL} -#define RANGE_mA (a, b) {(a) * 1e6, (b) * 1e6, UNIT_mA} +#define RANGE_MA (a, b) {(a) * 1e6, (b) * 1e6, UNIT_MA}#define RANGE_unitless (a, b) {(a) * 1e6, (b) * 1e6, 0}#define BIP_RANGE (a) {-(a) * 1e6, (a) * 1e6, 0}#define UNI_RANGE (a) {0, (a) * 1e6, 0}
@@ -593,9 +593,9 @@ extern const struct comedi_lrange range_bipolar2_5;extern const struct comedi_lrange range_unipolar10;extern const struct comedi_lrange range_unipolar5;extern const struct comedi_lrange range_unipolar2_5; -extern const struct comedi_lrange range_0_20mA; -extern const struct comedi_lrange range_4_20mA; -extern const struct comedi_lrange range_0_32mA; +extern const struct comedi_lrange range_0_20ma; +extern const struct comedi_lrange range_4_20ma; +extern const struct comedi_lrange range_0_32ma;extern const struct comedi_lrange range_unknown;#define range_digital range_unipolar5
drivers/staging/comedi/drivers/ni_daq_dio24.c +26 -26
61 lines not on this page · raw message
Signature · 1 line
2.5.5
Quoted 103 lines · Amit Ghadge
This is a patch to the
ni_daq_dio24.cthat fixes checkpatch warning:WARNING: Block comments use * on subsequent lines
Signed-off-by Amit Ghadge <[email protected]>--- drivers/staging/comedi/comedidev.h | 8 ++--- drivers/staging/comedi/drivers/ni_daq_dio24.c | 52 +++++++++++++-------------- 2 files changed, 30 insertions(+), 30 deletions(-)drivers/staging/comedi/comedidev.h +4
-4@@ -582,7 +582,7 @@ int comedi_check_chanlist(struct comedi_subdevice *s,#define RANGE (a, b) {(a) * 1e6, (b) * 1e6, 0}#define RANGE_ext (a, b) {(a) * 1e6, (b) * 1e6, RF_EXTERNAL} -#define RANGE_mA (a, b) {(a) * 1e6, (b) * 1e6, UNIT_mA} +#define RANGE_MA (a, b) {(a) * 1e6, (b) * 1e6, UNIT_MA}#define RANGE_unitless (a, b) {(a) * 1e6, (b) * 1e6, 0}#define BIP_RANGE (a) {-(a) * 1e6, (a) * 1e6, 0}#define UNI_RANGE (a) {0, (a) * 1e6, 0}@@ -593,9 +593,9 @@ extern const struct comedi_lrange range_bipolar2_5;extern const struct comedi_lrange range_unipolar10;extern const struct comedi_lrange range_unipolar5;extern const struct comedi_lrange range_unipolar2_5; -extern const struct comedi_lrange range_0_20mA; -extern const struct comedi_lrange range_4_20mA; -extern const struct comedi_lrange range_0_32mA; +extern const struct comedi_lrange range_0_20ma; +extern const struct comedi_lrange range_4_20ma; +extern const struct comedi_lrange range_0_32ma;extern const struct comedi_lrange range_unknown;#define range_digital range_unipolar5drivers/staging/comedi/drivers/ni_daq_dio24.c +26
-27@@ -1,35 +1,35 @@/* -comedi/drivers/ni_daq_dio24.c -Driver for National Instruments PCMCIA DAQ-Card DIO-24 -Copyright (C) 2002 Daniel Vecino Castel <[email protected]> +* comedi/drivers/ni_daq_dio24.c +* Driver for National Instruments PCMCIA DAQ-Card DIO-24 +* Copyright (C) 2002 Daniel Vecino Castel <[email protected]> -PCMCIA crap at end of file is adapted from dummy_cs.c 1.31 -2001/08/24 12:13:13 from the pcmcia package. -The initial developer of the pcmcia dummy_cs.c code is David A. Hinds -<[email protected]>. Portions created by David A. Hinds -are Copyright (C) 1999 David A. Hinds. All Rights Reserved. +* PCMCIA crap at end of file is adapted from dummy_cs.c 1.31 +* 2001/08/24 12:13:13 from the pcmcia package. +* The initial developer of the pcmcia dummy_cs.c code is David A. Hinds +* <[email protected]>. Portions created by David A. Hinds +* are Copyright (C) 1999 David A. Hinds. All Rights Reserved. -This program is free software; you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation; either version 2 of the License, or -(at your option) any later version. +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; either version 2 of the License, or +* (at your option) any later version. -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. -*/ +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +*/ /* -Driver: ni_daq_dio24 -Description: National Instruments PCMCIA DAQ-Card DIO-24 -Author: Daniel Vecino Castel <[email protected]> -Devices: [National Instruments] PCMCIA DAQ-Card DIO-24 (ni_daq_dio24) -Status: ? -Updated: Thu, 07 Nov 2002 21:53:06 -0800 +* Driver: ni_daq_dio24 +* Description: National Instruments PCMCIA DAQ-Card DIO-24 +* Author: Daniel Vecino Castel <[email protected]> +* Devices: [National Instruments] PCMCIA DAQ-Card DIO-24 (ni_daq_dio24) +* Status: ? +* Updated: Thu, 07 Nov 2002 21:53:06 -0800 -This is just a wrapper around the 8255.o driver to properly handle -the PCMCIA interface. -*/ +* This is just a wrapper around the 8255.o driver to properly handle +* the PCMCIA interface. +*/ #include <linux/module.h> #include "../comedi_pcmcia.h" --
Quoted 2 lines
2.5.5
Please ignore this patch.
Amit
kbuild test robot
build boturl: https://github.com/0day-ci/linux/commits/Amit-Ghadge/Staging-comedi-ni_daq_dio24-c-Fix-block-comments-use-on-subsequent-lines/20160904-170303 config: i386-allyesconfig (attached as .config)…
Hi Amit,
[auto build test WARNING on v4.8-rc4]
[cannot apply to staging/staging-testing next-20160825]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
[Suggest to use git(>=2.9.0) format-patch --base=<commit> (or --base=auto for convenience) to record what (public, well-known) commit your patch series was built on] [Check https://git-scm.com/docs/git-format-patch for more information]
url: https://github.com/0day-ci/linux/commits/Amit-Ghadge/Staging-comedi-ni_daq_dio24-c-Fix-block-comments-use-on-subsequent-lines/20160904-170303
config: i386-allyesconfig (attached as .config)
compiler: gcc-6 (Debian 6.1.1-9) 6.1.1 20160705
reproduce:
# save the attached .config to linux build tree
make ARCH=i386 All warnings (new ones prefixed by >>):
drivers/staging/comedi/drivers/dac02.c:66:3: error: implicit declaration of function 'RANGE_mA' [-Werror=implicit-function-declaration]
RANGE_mA(4, 20),
^~~~~~~~
drivers/staging/comedi/drivers/dac02.c:66:3: error: initializer element is not constant
drivers/staging/comedi/drivers/dac02.c:66:3: note: (near initialization for 'das02_ao_ranges.range[4].min')
drivers/staging/comedi/drivers/dac02.c:67:3: warning: braces around scalar initializer
RANGE_ext(0, 1)
^
drivers/staging/comedi/drivers/dac02.c:67:3: note: (near initialization for 'das02_ao_ranges.range[4].max')
>> drivers/staging/comedi/drivers/dac02.c:67:15: warning: excess elements in scalar initializer
RANGE_ext(0, 1)
^
drivers/staging/comedi/drivers/dac02.c:67:15: note: (near initialization for 'das02_ao_ranges.range[4].max')
drivers/staging/comedi/drivers/dac02.c:67:26: warning: excess elements in scalar initializer
RANGE_ext(0, 1)
^
drivers/staging/comedi/drivers/dac02.c:67:26: note: (near initialization for 'das02_ao_ranges.range[4].max')
drivers/staging/comedi/drivers/dac02.c:61:5: warning: missing braces around initializer [-Wmissing-braces]
6, {
^
drivers/staging/comedi/drivers/dac02.c:61:5: note: (near initialization for 'das02_ao_ranges.range')
drivers/staging/comedi/drivers/dac02.c:60:53: warning: missing braces around initializer [-Wmissing-braces]
static const struct comedi_lrange das02_ao_ranges = {
^ drivers/staging/comedi/drivers/dac02.c:60:53: note: (near initialization for 'das02_ao_ranges')
cc1: some warnings being treated as errors
vim +67 drivers/staging/comedi/drivers/dac02.c
99999e27 H Hartley Sweeten 2014-03-11 60 static const struct comedi_lrange das02_ao_ranges = {
99999e27 H Hartley Sweeten 2014-03-11 61 6, {
99999e27 H Hartley Sweeten 2014-03-11 62 UNI_RANGE(5),
99999e27 H Hartley Sweeten 2014-03-11 63 UNI_RANGE(10),
99999e27 H Hartley Sweeten 2014-03-11 64 BIP_RANGE(5),
99999e27 H Hartley Sweeten 2014-03-11 65 BIP_RANGE(10),
99999e27 H Hartley Sweeten 2014-03-11 @66 RANGE_mA(4, 20),
99999e27 H Hartley Sweeten 2014-03-11 @67 RANGE_ext(0, 1)
99999e27 H Hartley Sweeten 2014-03-11 68 }
99999e27 H Hartley Sweeten 2014-03-11 69 };99999e27 H Hartley Sweeten 2014-03-11 70
:::::: The code at line 67 was first introduced by commit
:::::: 99999e27475c9cbed2d59ac33f1d6f21bf9e260d staging: comedi: dac02: introduce comedi driver for DAC02 boards
:::::: TO: H Hartley Sweeten <[email protected]> :::::: CC: Greg Kroah-Hartman <[email protected]>
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
kbuild test robot
build boturl: https://github.com/0day-ci/linux/commits/Amit-Ghadge/Staging-comedi-ni_daq_dio24-c-Fix-block-comments-use-on-subsequent-lines/20160904-170303 config: i386-randconfig-i0-201636 (attached as…
Hi Amit,
[auto build test WARNING on v4.8-rc4]
[cannot apply to staging/staging-testing next-20160825]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
[Suggest to use git(>=2.9.0) format-patch --base=<commit> (or --base=auto for convenience) to record what (public, well-known) commit your patch series was built on] [Check https://git-scm.com/docs/git-format-patch for more information]
url: https://github.com/0day-ci/linux/commits/Amit-Ghadge/Staging-comedi-ni_daq_dio24-c-Fix-block-comments-use-on-subsequent-lines/20160904-170303
config: i386-randconfig-i0-201636 (attached as .config)
compiler: gcc-4.8 (Debian 4.8.4-1) 4.8.4 reproduce:
# save the attached .config to linux build tree
make ARCH=i386 All warnings (new ones prefixed by >>):
drivers/staging/comedi/drivers/adv_pci1724.c:76:3: error: implicit declaration of function 'RANGE_mA' [-Werror=implicit-function-declaration]
RANGE_mA(0, 20),
^
drivers/staging/comedi/drivers/adv_pci1724.c:76:3: warning: missing braces around initializer [-Wmissing-braces]
drivers/staging/comedi/drivers/adv_pci1724.c:76:3: warning: (near initialization for 'adv_pci1724_ao_ranges.range[1]') [-Wmissing-braces]
drivers/staging/comedi/drivers/adv_pci1724.c:76:3: error: initializer element is not constant
drivers/staging/comedi/drivers/adv_pci1724.c:76:3: error: (near initialization for 'adv_pci1724_ao_ranges.range[1].min')
drivers/staging/comedi/drivers/adv_pci1724.c:77:3: error: initializer element is not constant
RANGE_mA(4, 20),
^
drivers/staging/comedi/drivers/adv_pci1724.c:77:3: error: (near initialization for 'adv_pci1724_ao_ranges.range[1].max')
drivers/staging/comedi/drivers/adv_pci1724.c:78:3: warning: braces around scalar initializer [enabled by default]
RANGE_unitless(0, 1)
^
drivers/staging/comedi/drivers/adv_pci1724.c:78:3: warning: (near initialization for 'adv_pci1724_ao_ranges.range[1].flags') [enabled by default]
>> drivers/staging/comedi/drivers/adv_pci1724.c:78:3: warning: excess elements in scalar initializer [enabled by default]
drivers/staging/comedi/drivers/adv_pci1724.c:78:3: warning: (near initialization for 'adv_pci1724_ao_ranges.range[1].flags') [enabled by default]
>> drivers/staging/comedi/drivers/adv_pci1724.c:78:3: warning: excess elements in scalar initializer [enabled by default] drivers/staging/comedi/drivers/adv_pci1724.c:78:3: warning: (near initialization for 'adv_pci1724_ao_ranges.range[1].flags') [enabled by default]
cc1: some warnings being treated as errors
vim +78 drivers/staging/comedi/drivers/adv_pci1724.c
c2edc021 H Hartley Sweeten 2014-11-20 70 #define PCI1724_BOARD_ID_REG 0x10
70adf763 H Hartley Sweeten 2014-11-20 71 #define PCI1724_BOARD_ID_MASK (0xf << 0)
f165d815 Frank Mori Hess 2013-03-12 72
474bfe5f H Hartley Sweeten 2014-11-20 73 static const struct comedi_lrange adv_pci1724_ao_ranges = {
348dc03e H Hartley Sweeten 2013-12-09 74 4, {
f165d815 Frank Mori Hess 2013-03-12 75 BIP_RANGE(10),
f165d815 Frank Mori Hess 2013-03-12 @76 RANGE_mA(0, 20),
f165d815 Frank Mori Hess 2013-03-12 77 RANGE_mA(4, 20),
f165d815 Frank Mori Hess 2013-03-12 @78 RANGE_unitless(0, 1)
f165d815 Frank Mori Hess 2013-03-12 79 }
f165d815 Frank Mori Hess 2013-03-12 80 };
f165d815 Frank Mori Hess 2013-03-12 81 :::::: The code at line 78 was first introduced by commit
:::::: f165d815d50f158be43aa12c5c800fd27bbecad3 staging: comedi: adv_pci1724: new driver
:::::: TO: Frank Mori Hess <[email protected]> :::::: CC: Greg Kroah-Hartman <[email protected]>
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
kbuild test robot
build boturl: https://github.com/0day-ci/linux/commits/Amit-Ghadge/Staging-comedi-ni_daq_dio24-c-Fix-block-comments-use-on-subsequent-lines/20160904-170303 config: i386-allmodconfig (attached as .config)…
Hi Amit,
[auto build test ERROR on v4.8-rc4]
[cannot apply to staging/staging-testing next-20160825]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
[Suggest to use git(>=2.9.0) format-patch --base=<commit> (or --base=auto for convenience) to record what (public, well-known) commit your patch series was built on] [Check https://git-scm.com/docs/git-format-patch for more information]
url: https://github.com/0day-ci/linux/commits/Amit-Ghadge/Staging-comedi-ni_daq_dio24-c-Fix-block-comments-use-on-subsequent-lines/20160904-170303
config: i386-allmodconfig (attached as .config)
compiler: gcc-6 (Debian 6.1.1-9) 6.1.1 20160705
reproduce:
# save the attached .config to linux build tree
make ARCH=i386 All error/warnings (new ones prefixed by >>):
>> drivers/staging/comedi/range.c:35:49: error: implicit declaration of function 'RANGE_mA' [-Werror=implicit-function-declaration]
const struct comedi_lrange range_0_20mA = { 1, {RANGE_mA(0, 20)} };
^~~~~~~~
>> drivers/staging/comedi/range.c:35:49: error: initializer element is not constant
drivers/staging/comedi/range.c:35:49: note: (near initialization for 'range_0_20mA.range[0].min')
drivers/staging/comedi/range.c:37:49: error: initializer element is not constant
const struct comedi_lrange range_4_20mA = { 1, {RANGE_mA(4, 20)} };
^~~~~~~~
drivers/staging/comedi/range.c:37:49: note: (near initialization for 'range_4_20mA.range[0].min')
drivers/staging/comedi/range.c:39:49: error: initializer element is not constant
const struct comedi_lrange range_0_32mA = { 1, {RANGE_mA(0, 32)} };
^~~~~~~~
drivers/staging/comedi/range.c:39:49: note: (near initialization for 'range_0_32mA.range[0].min')
cc1: some warnings being treated as errors
--
>> drivers/staging/comedi/drivers/pcl726.c:82:3: error: 'range_4_20mA' undeclared here (not in a function)
&range_4_20mA,
^~~~~~~~~~~~
>> drivers/staging/comedi/drivers/pcl726.c:90:2: error: initializer element is not constant
&range_4_20mA
^
drivers/staging/comedi/drivers/pcl726.c:90:2: note: (near initialization for 'rangelist_727[3]')
drivers/staging/comedi/drivers/pcl726.c:98:2: error: initializer element is not constant
&range_4_20mA,
^
drivers/staging/comedi/drivers/pcl726.c:98:2: note: (near initialization for 'rangelist_728[4]')
>> drivers/staging/comedi/drivers/pcl726.c:99:3: error: 'range_0_20mA' undeclared here (not in a function)
&range_0_20mA
^~~~~~~~~~~~
drivers/staging/comedi/drivers/pcl726.c:99:2: error: initializer element is not constant
&range_0_20mA
^
drivers/staging/comedi/drivers/pcl726.c:99:2: note: (near initialization for 'rangelist_728[5]')
--
>> drivers/staging/comedi/drivers/dac02.c:66:3: error: implicit declaration of function 'RANGE_mA' [-Werror=implicit-function-declaration]
RANGE_mA(4, 20),
^~~~~~~~
>> drivers/staging/comedi/drivers/dac02.c:66:3: error: initializer element is not constant
drivers/staging/comedi/drivers/dac02.c:66:3: note: (near initialization for 'das02_ao_ranges.range[4].min')
>> drivers/staging/comedi/drivers/dac02.c:67:3: warning: braces around scalar initializer
RANGE_ext(0, 1)
^~~~~~~~~
drivers/staging/comedi/drivers/dac02.c:67:3: note: (near initialization for 'das02_ao_ranges.range[4].max')
In file included from drivers/staging/comedi/drivers/dac02.c:38:0:
>> drivers/staging/comedi/drivers/../comedidev.h:584:38: warning: excess elements in scalar initializer
#define RANGE_ext(a, b) {(a) * 1e6, (b) * 1e6, RF_EXTERNAL}
^
>> drivers/staging/comedi/drivers/dac02.c:67:3: note: in expansion of macro 'RANGE_ext'
RANGE_ext(0, 1)
^~~~~~~~~
drivers/staging/comedi/drivers/../comedidev.h:584:38: note: (near initialization for 'das02_ao_ranges.range[4].max')
#define RANGE_ext(a, b) {(a) * 1e6, (b) * 1e6, RF_EXTERNAL}
^
>> drivers/staging/comedi/drivers/dac02.c:67:3: note: in expansion of macro 'RANGE_ext'
RANGE_ext(0, 1)
^~~~~~~~~
In file included from drivers/staging/comedi/drivers/../comedidev.h:28:0,
from drivers/staging/comedi/drivers/dac02.c:38:
>> drivers/staging/comedi/drivers/../comedi.h:897:22: warning: excess elements in scalar initializer
#define RF_EXTERNAL 0x100
^
>> drivers/staging/comedi/drivers/../comedidev.h:584:49: note: in expansion of macro 'RF_EXTERNAL'
#define RANGE_ext(a, b) {(a) * 1e6, (b) * 1e6, RF_EXTERNAL}
^~~~~~~~~~~
>> drivers/staging/comedi/drivers/dac02.c:67:3: note: in expansion of macro 'RANGE_ext'
RANGE_ext(0, 1)
^~~~~~~~~
drivers/staging/comedi/drivers/../comedi.h:897:22: note: (near initialization for 'das02_ao_ranges.range[4].max')
#define RF_EXTERNAL 0x100
^
>> drivers/staging/comedi/drivers/../comedidev.h:584:49: note: in expansion of macro 'RF_EXTERNAL'
#define RANGE_ext(a, b) {(a) * 1e6, (b) * 1e6, RF_EXTERNAL}
^~~~~~~~~~~
>> drivers/staging/comedi/drivers/dac02.c:67:3: note: in expansion of macro 'RANGE_ext'
RANGE_ext(0, 1)
^~~~~~~~~
>> drivers/staging/comedi/drivers/dac02.c:61:5: warning: missing braces around initializer [-Wmissing-braces]
6, {
^
drivers/staging/comedi/drivers/dac02.c:61:5: note: (near initialization for 'das02_ao_ranges.range')
drivers/staging/comedi/drivers/dac02.c:60:53: warning: missing braces around initializer [-Wmissing-braces]
static const struct comedi_lrange das02_ao_ranges = {
^ drivers/staging/comedi/drivers/dac02.c:60:53: note: (near initialization for 'das02_ao_ranges')
cc1: some warnings being treated as errors
--
drivers/staging/comedi/drivers/dt2815.c: In function 'dt2815_attach':
>> drivers/staging/comedi/drivers/dt2815.c:177:9: error: 'range_4_20mA' undeclared (first use in this function)
? &range_4_20mA : &range_0_32mA;
^~~~~~~~~~~~
drivers/staging/comedi/drivers/dt2815.c:177:9: note: each undeclared identifier is reported only once for each function it appears in
>> drivers/staging/comedi/drivers/dt2815.c:177:25: error: 'range_0_32mA' undeclared (first use in this function)
? &range_4_20mA : &range_0_32mA;
^~~~~~~~~~~~
--
>> drivers/staging/comedi/drivers/adv_pci1724.c:76:3: error: implicit declaration of function 'RANGE_mA' [-Werror=implicit-function-declaration]
RANGE_mA(0, 20),
^~~~~~~~
>> drivers/staging/comedi/drivers/adv_pci1724.c:76:3: error: initializer element is not constant
drivers/staging/comedi/drivers/adv_pci1724.c:76:3: note: (near initialization for 'adv_pci1724_ao_ranges.range[1].min')
drivers/staging/comedi/drivers/adv_pci1724.c:77:3: error: initializer element is not constant
RANGE_mA(4, 20),
^~~~~~~~
drivers/staging/comedi/drivers/adv_pci1724.c:77:3: note: (near initialization for 'adv_pci1724_ao_ranges.range[1].max')
>> drivers/staging/comedi/drivers/adv_pci1724.c:78:3: warning: braces around scalar initializer
RANGE_unitless(0, 1)
^~~~~~~~~~~~~~
drivers/staging/comedi/drivers/adv_pci1724.c:78:3: note: (near initialization for 'adv_pci1724_ao_ranges.range[1].flags')
In file included from drivers/staging/comedi/drivers/../comedi_pci.h:24:0,
from drivers/staging/comedi/drivers/adv_pci1724.c:51:
drivers/staging/comedi/drivers/../comedidev.h:586:42: warning: excess elements in scalar initializer
#define RANGE_unitless(a, b) {(a) * 1e6, (b) * 1e6, 0}
^
>> drivers/staging/comedi/drivers/adv_pci1724.c:78:3: note: in expansion of macro 'RANGE_unitless'
RANGE_unitless(0, 1)
^~~~~~~~~~~~~~
drivers/staging/comedi/drivers/../comedidev.h:586:42: note: (near initialization for 'adv_pci1724_ao_ranges.range[1].flags')
#define RANGE_unitless(a, b) {(a) * 1e6, (b) * 1e6, 0}
^
>> drivers/staging/comedi/drivers/adv_pci1724.c:78:3: note: in expansion of macro 'RANGE_unitless'
RANGE_unitless(0, 1)
^~~~~~~~~~~~~~
drivers/staging/comedi/drivers/../comedidev.h:586:53: warning: excess elements in scalar initializer
#define RANGE_unitless(a, b) {(a) * 1e6, (b) * 1e6, 0}
^
>> drivers/staging/comedi/drivers/adv_pci1724.c:78:3: note: in expansion of macro 'RANGE_unitless'
RANGE_unitless(0, 1)
^~~~~~~~~~~~~~
drivers/staging/comedi/drivers/../comedidev.h:586:53: note: (near initialization for 'adv_pci1724_ao_ranges.range[1].flags')
#define RANGE_unitless(a, b) {(a) * 1e6, (b) * 1e6, 0}
^
>> drivers/staging/comedi/drivers/adv_pci1724.c:78:3: note: in expansion of macro 'RANGE_unitless'
RANGE_unitless(0, 1)
^~~~~~~~~~~~~~
>> drivers/staging/comedi/drivers/adv_pci1724.c:73:59: warning: missing braces around initializer [-Wmissing-braces]
static const struct comedi_lrange adv_pci1724_ao_ranges = {
^ drivers/staging/comedi/drivers/adv_pci1724.c:73:59: note: (near initialization for 'adv_pci1724_ao_ranges')
cc1: some warnings being treated as errors
--
drivers/staging/comedi/drivers/ni_670x.c: In function 'ni_670x_auto_attach':
>> drivers/staging/comedi/drivers/ni_670x.c:225:32: error: 'range_0_20mA' undeclared (first use in this function)
range_table_list[16 + i] = &range_0_20mA;
^~~~~~~~~~~~ drivers/staging/comedi/drivers/ni_670x.c:225:32: note: each undeclared identifier is reported only once for each function it appears in
vim +/RANGE_mA +35 drivers/staging/comedi/range.c
f0f29184 Mark Rankilor 2010-05-03 29 const struct comedi_lrange range_unipolar10 = { 1, {UNI_RANGE(10)} };
5660e742 H Hartley Sweeten 2013-04-12 30 EXPORT_SYMBOL_GPL(range_unipolar10);
f0f29184 Mark Rankilor 2010-05-03 31 const struct comedi_lrange range_unipolar5 = { 1, {UNI_RANGE(5)} };
5660e742 H Hartley Sweeten 2013-04-12 32 EXPORT_SYMBOL_GPL(range_unipolar5);
5f8eb72c H Hartley Sweeten 2013-04-03 33 const struct comedi_lrange range_unipolar2_5 = { 1, {UNI_RANGE(2.5)} };
5660e742 H Hartley Sweeten 2013-04-12 34 EXPORT_SYMBOL_GPL(range_unipolar2_5);
2c71c4ff H Hartley Sweeten 2013-04-03 @35 const struct comedi_lrange range_0_20mA = { 1, {RANGE_mA(0, 20)} };
5660e742 H Hartley Sweeten 2013-04-12 36 EXPORT_SYMBOL_GPL(range_0_20mA);
2c71c4ff H Hartley Sweeten 2013-04-03 37 const struct comedi_lrange range_4_20mA = { 1, {RANGE_mA(4, 20)} };
5660e742 H Hartley Sweeten 2013-04-12 38 EXPORT_SYMBOL_GPL(range_4_20mA);:::::: The code at line 35 was first introduced by commit
:::::: 2c71c4ff57a6564097bedd45bc589f73da798a3a staging: comedi: range: introduce some simple mA ranges
:::::: TO: H Hartley Sweeten <[email protected]> :::::: CC: Greg Kroah-Hartman <[email protected]>
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
Quoted 180 lines · kbuild test robot
Hi Amit,
[auto build test ERROR on v4.8-rc4]
[cannot apply to staging/staging-testing next-20160825]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
[Suggest to use git(>=2.9.0) format-patch --base=<commit> (or --base=auto for convenience) to record what (public, well-known) commit your patch series was built on] [Check https://git-scm.com/docs/git-format-patch for more information]url: https://github.com/0day-ci/linux/commits/Amit-Ghadge/Staging-comedi-ni_daq_dio24-c-Fix-block-comments-use-on-subsequent-lines/20160904-170303
config: i386-allmodconfig (attached as .config)
compiler: gcc-6 (Debian 6.1.1-9) 6.1.1 20160705
reproduce:# save the attached .config to linux build tree make ARCH=i386All error/warnings (new ones prefixed by >>):
Quoted 1 line
Quoted 1 line
drivers/staging/comedi/range.c:35:49: error: implicit declaration of function 'RANGE_mA' [-Werror=implicit-function-declaration]const struct comedi_lrange range_0_20mA = { 1, {RANGE_mA(0, 20)} }; ^~~~~~~~Quoted 1 line
Quoted 1 line
drivers/staging/comedi/range.c:35:49: error: initializer element is not constant
drivers/staging/comedi/range.c:35:49: note: (near initialization for 'range_0_20mA.range[0].min')drivers/staging/comedi/range.c:37:49: error: initializer element is not constantconst struct comedi_lrange range_4_20mA = { 1, {RANGE_mA(4, 20)} }; ^~~~~~~~ drivers/staging/comedi/range.c:37:49: note: (near initialization for 'range_4_20mA.range[0].min') drivers/staging/comedi/range.c:39:49: error: initializer element is not constant const struct comedi_lrange range_0_32mA = { 1, {RANGE_mA(0, 32)} }; ^~~~~~~~
drivers/staging/comedi/range.c:39:49: note: (near initialization for 'range_0_32mA.range[0].min')
cc1: some warnings being treated as errors
--Quoted 1 line
Quoted 1 line
drivers/staging/comedi/drivers/pcl726.c:82:3: error: 'range_4_20mA' undeclared here (not in a function)&range_4_20mA, ^~~~~~~~~~~~Quoted 1 line
Quoted 1 line
drivers/staging/comedi/drivers/pcl726.c:90:2: error: initializer element is not constant&range_4_20mA ^ drivers/staging/comedi/drivers/pcl726.c:90:2: note: (near initialization for 'rangelist_727[3]') drivers/staging/comedi/drivers/pcl726.c:98:2: error: initializer element is not constant &range_4_20mA, ^
drivers/staging/comedi/drivers/pcl726.c:98:2: note: (near initialization for 'rangelist_728[4]')Quoted 1 line
Quoted 1 line
drivers/staging/comedi/drivers/pcl726.c:99:3: error: 'range_0_20mA' undeclared here (not in a function)&range_0_20mA ^~~~~~~~~~~~ drivers/staging/comedi/drivers/pcl726.c:99:2: error: initializer element is not constant &range_0_20mA ^
drivers/staging/comedi/drivers/pcl726.c:99:2: note: (near initialization for 'rangelist_728[5]')
--Quoted 1 line
Quoted 1 line
drivers/staging/comedi/drivers/dac02.c:66:3: error: implicit declaration of function 'RANGE_mA' [-Werror=implicit-function-declaration]RANGE_mA(4, 20), ^~~~~~~~Quoted 1 line
Quoted 1 line
drivers/staging/comedi/drivers/dac02.c:66:3: error: initializer element is not constant
drivers/staging/comedi/drivers/dac02.c:66:3: note: (near initialization for 'das02_ao_ranges.range[4].min')Quoted 1 line
Quoted 1 line
drivers/staging/comedi/drivers/dac02.c:67:3: warning: braces around scalar initializerRANGE_ext(0, 1) ^~~~~~~~~
drivers/staging/comedi/drivers/dac02.c:67:3: note: (near initialization for 'das02_ao_ranges.range[4].max') In file included fromdrivers/staging/comedi/drivers/dac02.c:38:0:Quoted 1 line
Quoted 1 line
drivers/staging/comedi/drivers/../comedidev.h:584:38: warning: excess elements in scalar initializer#define RANGE_ext(a, b) {(a) * 1e6, (b) * 1e6, RF_EXTERNAL} ^Quoted 1 line
Quoted 1 line
drivers/staging/comedi/drivers/dac02.c:67:3: note: in expansion of macro 'RANGE_ext'RANGE_ext(0, 1) ^~~~~~~~~ drivers/staging/comedi/drivers/../comedidev.h:584:38: note: (near initialization for 'das02_ao_ranges.range[4].max') #define RANGE_ext(a, b) {(a) * 1e6, (b) * 1e6, RF_EXTERNAL} ^Quoted 1 line
Quoted 1 line
drivers/staging/comedi/drivers/dac02.c:67:3: note: in expansion of macro 'RANGE_ext'RANGE_ext(0, 1) ^~~~~~~~~In file included from
drivers/staging/comedi/drivers/../comedidev.h:28:0,
fromdrivers/staging/comedi/drivers/dac02.c:38:Quoted 1 line
Quoted 1 line
drivers/staging/comedi/drivers/../comedi.h:897:22: warning: excess elements in scalar initializer#define RF_EXTERNAL 0x100 ^Quoted 1 line
Quoted 1 line
drivers/staging/comedi/drivers/../comedidev.h:584:49: note: in expansion of macro 'RF_EXTERNAL'#define RANGE_ext(a, b) {(a) * 1e6, (b) * 1e6, RF_EXTERNAL} ^~~~~~~~~~~Quoted 1 line
Quoted 1 line
drivers/staging/comedi/drivers/dac02.c:67:3: note: in expansion of macro 'RANGE_ext'RANGE_ext(0, 1) ^~~~~~~~~ drivers/staging/comedi/drivers/../comedi.h:897:22: note: (near initialization for 'das02_ao_ranges.range[4].max') #define RF_EXTERNAL 0x100 ^Quoted 1 line
Quoted 1 line
drivers/staging/comedi/drivers/../comedidev.h:584:49: note: in expansion of macro 'RF_EXTERNAL'#define RANGE_ext(a, b) {(a) * 1e6, (b) * 1e6, RF_EXTERNAL} ^~~~~~~~~~~Quoted 1 line
Quoted 1 line
drivers/staging/comedi/drivers/dac02.c:67:3: note: in expansion of macro 'RANGE_ext'RANGE_ext(0, 1) ^~~~~~~~~Quoted 1 line
Quoted 1 line
drivers/staging/comedi/drivers/dac02.c:61:5: warning: missing braces around initializer [-Wmissing-braces]6, { ^ drivers/staging/comedi/drivers/dac02.c:61:5: note: (near initialization for 'das02_ao_ranges.range') drivers/staging/comedi/drivers/dac02.c:60:53: warning: missing braces around initializer [-Wmissing-braces] static const struct comedi_lrange das02_ao_ranges = { ^
drivers/staging/comedi/drivers/dac02.c:60:53: note: (near initialization for 'das02_ao_ranges')
cc1: some warnings being treated as errors
--
drivers/staging/comedi/drivers/dt2815.c: In function 'dt2815_attach':Quoted 1 line
Quoted 1 line
drivers/staging/comedi/drivers/dt2815.c:177:9: error: 'range_4_20mA' undeclared (first use in this function)? &range_4_20mA : &range_0_32mA; ^~~~~~~~~~~~
drivers/staging/comedi/drivers/dt2815.c:177:9: note: each undeclared identifier is reported only once for each function it appears inQuoted 1 line
Quoted 1 line
drivers/staging/comedi/drivers/dt2815.c:177:25: error: 'range_0_32mA' undeclared (first use in this function)? &range_4_20mA : &range_0_32mA; ^~~~~~~~~~~~--
Quoted 1 line
Quoted 1 line
drivers/staging/comedi/drivers/adv_pci1724.c:76:3: error: implicit declaration of function 'RANGE_mA' [-Werror=implicit-function-declaration]RANGE_mA(0, 20), ^~~~~~~~Quoted 1 line
Quoted 1 line
drivers/staging/comedi/drivers/adv_pci1724.c:76:3: error: initializer element is not constant
drivers/staging/comedi/drivers/adv_pci1724.c:76:3: note: (near initialization for 'adv_pci1724_ao_ranges.range[1].min')drivers/staging/comedi/drivers/adv_pci1724.c:77:3: error: initializer element is not constantRANGE_mA(4, 20), ^~~~~~~~
drivers/staging/comedi/drivers/adv_pci1724.c:77:3: note: (near initialization for 'adv_pci1724_ao_ranges.range[1].max')Quoted 1 line
Quoted 1 line
drivers/staging/comedi/drivers/adv_pci1724.c:78:3: warning: braces around scalar initializerRANGE_unitless(0, 1) ^~~~~~~~~~~~~~ drivers/staging/comedi/drivers/adv_pci1724.c:78:3: note: (near initialization for 'adv_pci1724_ao_ranges.range[1].flags') In file included from drivers/staging/comedi/drivers/../comedi_pci.h:24:0, from drivers/staging/comedi/drivers/adv_pci1724.c:51: drivers/staging/comedi/drivers/../comedidev.h:586:42: warning: excess elements in scalar initializer #define RANGE_unitless(a, b) {(a) * 1e6, (b) * 1e6, 0} ^Quoted 1 line
Quoted 1 line
drivers/staging/comedi/drivers/adv_pci1724.c:78:3: note: in expansion of macro 'RANGE_unitless'RANGE_unitless(0, 1) ^~~~~~~~~~~~~~ drivers/staging/comedi/drivers/../comedidev.h:586:42: note: (near initialization for 'adv_pci1724_ao_ranges.range[1].flags') #define RANGE_unitless(a, b) {(a) * 1e6, (b) * 1e6, 0} ^Quoted 1 line
Quoted 1 line
drivers/staging/comedi/drivers/adv_pci1724.c:78:3: note: in expansion of macro 'RANGE_unitless'RANGE_unitless(0, 1) ^~~~~~~~~~~~~~ drivers/staging/comedi/drivers/../comedidev.h:586:53: warning: excess elements in scalar initializer #define RANGE_unitless(a, b) {(a) * 1e6, (b) * 1e6, 0} ^Quoted 1 line
Quoted 1 line
drivers/staging/comedi/drivers/adv_pci1724.c:78:3: note: in expansion of macro 'RANGE_unitless'RANGE_unitless(0, 1) ^~~~~~~~~~~~~~ drivers/staging/comedi/drivers/../comedidev.h:586:53: note: (near initialization for 'adv_pci1724_ao_ranges.range[1].flags') #define RANGE_unitless(a, b) {(a) * 1e6, (b) * 1e6, 0} ^Quoted 1 line
Quoted 1 line
drivers/staging/comedi/drivers/adv_pci1724.c:78:3: note: in expansion of macro 'RANGE_unitless'RANGE_unitless(0, 1) ^~~~~~~~~~~~~~Quoted 1 line
Quoted 1 line
drivers/staging/comedi/drivers/adv_pci1724.c:73:59: warning: missing braces around initializer [-Wmissing-braces]static const struct comedi_lrange adv_pci1724_ao_ranges = { ^
drivers/staging/comedi/drivers/adv_pci1724.c:73:59: note: (near initialization for 'adv_pci1724_ao_ranges')
cc1: some warnings being treated as errors
--
drivers/staging/comedi/drivers/ni_670x.c: In function 'ni_670x_auto_attach':Quoted 1 line
Quoted 1 line
drivers/staging/comedi/drivers/ni_670x.c:225:32: error: 'range_0_20mA' undeclared (first use in this function)range_table_list[16 + i] = &range_0_20mA; ^~~~~~~~~~~~
drivers/staging/comedi/drivers/ni_670x.c:225:32: note: each undeclared identifier is reported only once for each function it appears invim +/RANGE_mA +35
drivers/staging/comedi/range.cf0f29184 Mark Rankilor 2010-05-03 29 const struct comedi_lrange range_unipolar10 = { 1, {UNI_RANGE(10)} }; 5660e742 H Hartley Sweeten 2013-04-12 30 EXPORT_SYMBOL_GPL(range_unipolar10); f0f29184 Mark Rankilor 2010-05-03 31 const struct comedi_lrange range_unipolar5 = { 1, {UNI_RANGE(5)} }; 5660e742 H Hartley Sweeten 2013-04-12 32 EXPORT_SYMBOL_GPL(range_unipolar5); 5f8eb72c H Hartley Sweeten 2013-04-03 33 const struct comedi_lrange range_unipolar2_5 = { 1, {UNI_RANGE(2.5)} }; 5660e742 H Hartley Sweeten 2013-04-12 34 EXPORT_SYMBOL_GPL(range_unipolar2_5); 2c71c4ff H Hartley Sweeten 2013-04-03 @35 const struct comedi_lrange range_0_20mA = { 1, {RANGE_mA(0, 20)} }; 5660e742 H Hartley Sweeten 2013-04-12 36 EXPORT_SYMBOL_GPL(range_0_20mA); 2c71c4ff H Hartley Sweeten 2013-04-03 37 const struct comedi_lrange range_4_20mA = { 1, {RANGE_mA(4, 20)} }; 5660e742 H Hartley Sweeten 2013-04-12 38 EXPORT_SYMBOL_GPL(range_4_20mA);:::::: The code at line 35 was first introduced by commit
::::::2c71c4ff57a6564097bedd45bc589f73da798a3astaging: comedi: range: introduce some simple mA ranges
Quoted 6 lines
:::::: TO: H Hartley Sweeten <[email protected]> :::::: CC: Greg Kroah-Hartman <[email protected]>
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
Please ignore this patch.
Amit G
kbuild test robot
build boturl: https://github.com/0day-ci/linux/commits/Amit-Ghadge/Staging-comedi-ni_daq_dio24-c-Fix-block-comments-use-on-subsequent-lines/20160904-170303 reproduce:
Hi Amit,
[auto build test WARNING on v4.8-rc4]
[cannot apply to staging/staging-testing next-20160825]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
[Suggest to use git(>=2.9.0) format-patch --base=<commit> (or --base=auto for convenience) to record what (public, well-known) commit your patch series was built on] [Check https://git-scm.com/docs/git-format-patch for more information]
# apt-get install sparse
make ARCH=x86_64 allmodconfig
make C=1 CF=-D__CHECK_ENDIAN__sparse warnings: (new ones prefixed by >>)
include/linux/compiler.h:230:8: sparse: attribute 'no_sanitize_address': unknown attribute drivers/staging/comedi/range.c:35:49: sparse: undefined identifier 'RANGE_mA'
>> drivers/staging/comedi/range.c:35:57: sparse: not a function <noident>
drivers/staging/comedi/range.c:37:49: sparse: undefined identifier 'RANGE_mA'
drivers/staging/comedi/range.c:37:57: sparse: not a function <noident>
drivers/staging/comedi/range.c:39:49: sparse: undefined identifier 'RANGE_mA'
drivers/staging/comedi/range.c:39:57: sparse: not a function <noident>
drivers/staging/comedi/range.c:35:49: error: implicit declaration of function 'RANGE_mA' [-Werror=implicit-function-declaration]
const struct comedi_lrange range_0_20mA = { 1, {RANGE_mA(0, 20)} };
^~~~~~~~
drivers/staging/comedi/range.c:35:49: error: initializer element is not constant
drivers/staging/comedi/range.c:35:49: note: (near initialization for 'range_0_20mA.range[0].min')
drivers/staging/comedi/range.c:37:49: error: initializer element is not constant
const struct comedi_lrange range_4_20mA = { 1, {RANGE_mA(4, 20)} };
^~~~~~~~
drivers/staging/comedi/range.c:37:49: note: (near initialization for 'range_4_20mA.range[0].min')
drivers/staging/comedi/range.c:39:49: error: initializer element is not constant
const struct comedi_lrange range_0_32mA = { 1, {RANGE_mA(0, 32)} };
^~~~~~~~ drivers/staging/comedi/range.c:39:49: note: (near initialization for 'range_0_32mA.range[0].min')
cc1: some warnings being treated as errors
--
include/linux/compiler.h:230:8: sparse: attribute 'no_sanitize_address': unknown attribute drivers/staging/comedi/drivers/dac02.c:66:17: sparse: undefined identifier 'RANGE_mA'
>> drivers/staging/comedi/drivers/dac02.c:66:25: sparse: not a function <noident>
drivers/staging/comedi/drivers/dac02.c:66:3: error: implicit declaration of function 'RANGE_mA' [-Werror=implicit-function-declaration]
RANGE_mA(4, 20),
^~~~~~~~
drivers/staging/comedi/drivers/dac02.c:66:3: error: initializer element is not constant
drivers/staging/comedi/drivers/dac02.c:66:3: note: (near initialization for 'das02_ao_ranges.range[4].min')
drivers/staging/comedi/drivers/dac02.c:67:3: warning: braces around scalar initializer
RANGE_ext(0, 1)
^~~~~~~~~
drivers/staging/comedi/drivers/dac02.c:67:3: note: (near initialization for 'das02_ao_ranges.range[4].max')
In file included from drivers/staging/comedi/drivers/dac02.c:38:0:
drivers/staging/comedi/drivers/../comedidev.h:584:38: warning: excess elements in scalar initializer
#define RANGE_ext(a, b) {(a) * 1e6, (b) * 1e6, RF_EXTERNAL}
^
drivers/staging/comedi/drivers/dac02.c:67:3: note: in expansion of macro 'RANGE_ext'
RANGE_ext(0, 1)
^~~~~~~~~
drivers/staging/comedi/drivers/../comedidev.h:584:38: note: (near initialization for 'das02_ao_ranges.range[4].max')
#define RANGE_ext(a, b) {(a) * 1e6, (b) * 1e6, RF_EXTERNAL}
^
drivers/staging/comedi/drivers/dac02.c:67:3: note: in expansion of macro 'RANGE_ext'
RANGE_ext(0, 1)
^~~~~~~~~
In file included from drivers/staging/comedi/drivers/../comedidev.h:28:0,
from drivers/staging/comedi/drivers/dac02.c:38:
drivers/staging/comedi/drivers/../comedi.h:897:22: warning: excess elements in scalar initializer
#define RF_EXTERNAL 0x100
^
drivers/staging/comedi/drivers/../comedidev.h:584:49: note: in expansion of macro 'RF_EXTERNAL'
#define RANGE_ext(a, b) {(a) * 1e6, (b) * 1e6, RF_EXTERNAL}
^~~~~~~~~~~
drivers/staging/comedi/drivers/dac02.c:67:3: note: in expansion of macro 'RANGE_ext'
RANGE_ext(0, 1)
^~~~~~~~~
drivers/staging/comedi/drivers/../comedi.h:897:22: note: (near initialization for 'das02_ao_ranges.range[4].max')
#define RF_EXTERNAL 0x100
^
drivers/staging/comedi/drivers/../comedidev.h:584:49: note: in expansion of macro 'RF_EXTERNAL'
#define RANGE_ext(a, b) {(a) * 1e6, (b) * 1e6, RF_EXTERNAL}
^~~~~~~~~~~
drivers/staging/comedi/drivers/dac02.c:67:3: note: in expansion of macro 'RANGE_ext'
RANGE_ext(0, 1)
^~~~~~~~~
drivers/staging/comedi/drivers/dac02.c:61:5: warning: missing braces around initializer [-Wmissing-braces]
6, {
^
drivers/staging/comedi/drivers/dac02.c:61:5: note: (near initialization for 'das02_ao_ranges.range')
drivers/staging/comedi/drivers/dac02.c:60:53: warning: missing braces around initializer [-Wmissing-braces]
static const struct comedi_lrange das02_ao_ranges = {
^ drivers/staging/comedi/drivers/dac02.c:60:53: note: (near initialization for 'das02_ao_ranges')
cc1: some warnings being treated as errors
--
include/linux/compiler.h:230:8: sparse: attribute 'no_sanitize_address': unknown attribute drivers/staging/comedi/drivers/adv_pci1724.c:76:17: sparse: undefined identifier 'RANGE_mA'
>> drivers/staging/comedi/drivers/adv_pci1724.c:76:25: sparse: not a function <noident>
drivers/staging/comedi/drivers/adv_pci1724.c:77:17: sparse: undefined identifier 'RANGE_mA'
drivers/staging/comedi/drivers/adv_pci1724.c:76:3: error: implicit declaration of function 'RANGE_mA' [-Werror=implicit-function-declaration]
RANGE_mA(0, 20),
^~~~~~~~
drivers/staging/comedi/drivers/adv_pci1724.c:76:3: error: initializer element is not constant
drivers/staging/comedi/drivers/adv_pci1724.c:76:3: note: (near initialization for 'adv_pci1724_ao_ranges.range[1].min')
drivers/staging/comedi/drivers/adv_pci1724.c:77:3: error: initializer element is not constant
RANGE_mA(4, 20),
^~~~~~~~
drivers/staging/comedi/drivers/adv_pci1724.c:77:3: note: (near initialization for 'adv_pci1724_ao_ranges.range[1].max')
drivers/staging/comedi/drivers/adv_pci1724.c:78:3: warning: braces around scalar initializer
RANGE_unitless(0, 1)
^~~~~~~~~~~~~~
drivers/staging/comedi/drivers/adv_pci1724.c:78:3: note: (near initialization for 'adv_pci1724_ao_ranges.range[1].flags')
In file included from drivers/staging/comedi/drivers/../comedi_pci.h:24:0,
from drivers/staging/comedi/drivers/adv_pci1724.c:51:
drivers/staging/comedi/drivers/../comedidev.h:586:42: warning: excess elements in scalar initializer
#define RANGE_unitless(a, b) {(a) * 1e6, (b) * 1e6, 0}
^
drivers/staging/comedi/drivers/adv_pci1724.c:78:3: note: in expansion of macro 'RANGE_unitless'
RANGE_unitless(0, 1)
^~~~~~~~~~~~~~
drivers/staging/comedi/drivers/../comedidev.h:586:42: note: (near initialization for 'adv_pci1724_ao_ranges.range[1].flags')
#define RANGE_unitless(a, b) {(a) * 1e6, (b) * 1e6, 0}
^
drivers/staging/comedi/drivers/adv_pci1724.c:78:3: note: in expansion of macro 'RANGE_unitless'
RANGE_unitless(0, 1)
^~~~~~~~~~~~~~
drivers/staging/comedi/drivers/../comedidev.h:586:53: warning: excess elements in scalar initializer
#define RANGE_unitless(a, b) {(a) * 1e6, (b) * 1e6, 0}
^
drivers/staging/comedi/drivers/adv_pci1724.c:78:3: note: in expansion of macro 'RANGE_unitless'
RANGE_unitless(0, 1)
^~~~~~~~~~~~~~
drivers/staging/comedi/drivers/../comedidev.h:586:53: note: (near initialization for 'adv_pci1724_ao_ranges.range[1].flags')
#define RANGE_unitless(a, b) {(a) * 1e6, (b) * 1e6, 0}
^
drivers/staging/comedi/drivers/adv_pci1724.c:78:3: note: in expansion of macro 'RANGE_unitless'
RANGE_unitless(0, 1)
^~~~~~~~~~~~~~
drivers/staging/comedi/drivers/adv_pci1724.c:73:59: warning: missing braces around initializer [-Wmissing-braces]
static const struct comedi_lrange adv_pci1724_ao_ranges = {
^ drivers/staging/comedi/drivers/adv_pci1724.c:73:59: note: (near initialization for 'adv_pci1724_ao_ranges')
cc1: some warnings being treated as errors
vim +35 drivers/staging/comedi/range.c
ecfe20db Greg Kroah-Hartman 2010-04-30 19 #include <linux/uaccess.h>
3b6b25b5 Greg Kroah-Hartman 2010-05-03 20 #include "comedidev.h"
3a5fa275 Ian Abbott 2012-06-19 21 #include "comedi_internal.h"
ed9eccbe David Schleef 2008-11-04 22
9ced1de6 Bill Pemberton 2009-03-16 23 const struct comedi_lrange range_bipolar10 = { 1, {BIP_RANGE(10)} };
5660e742 H Hartley Sweeten 2013-04-12 24 EXPORT_SYMBOL_GPL(range_bipolar10);
f0f29184 Mark Rankilor 2010-05-03 25 const struct comedi_lrange range_bipolar5 = { 1, {BIP_RANGE(5)} };
5660e742 H Hartley Sweeten 2013-04-12 26 EXPORT_SYMBOL_GPL(range_bipolar5);
f0f29184 Mark Rankilor 2010-05-03 27 const struct comedi_lrange range_bipolar2_5 = { 1, {BIP_RANGE(2.5)} };
5660e742 H Hartley Sweeten 2013-04-12 28 EXPORT_SYMBOL_GPL(range_bipolar2_5);
f0f29184 Mark Rankilor 2010-05-03 29 const struct comedi_lrange range_unipolar10 = { 1, {UNI_RANGE(10)} };
5660e742 H Hartley Sweeten 2013-04-12 30 EXPORT_SYMBOL_GPL(range_unipolar10);
f0f29184 Mark Rankilor 2010-05-03 31 const struct comedi_lrange range_unipolar5 = { 1, {UNI_RANGE(5)} };
5660e742 H Hartley Sweeten 2013-04-12 32 EXPORT_SYMBOL_GPL(range_unipolar5);
5f8eb72c H Hartley Sweeten 2013-04-03 33 const struct comedi_lrange range_unipolar2_5 = { 1, {UNI_RANGE(2.5)} };
5660e742 H Hartley Sweeten 2013-04-12 34 EXPORT_SYMBOL_GPL(range_unipolar2_5);
2c71c4ff H Hartley Sweeten 2013-04-03 @35 const struct comedi_lrange range_0_20mA = { 1, {RANGE_mA(0, 20)} };
5660e742 H Hartley Sweeten 2013-04-12 36 EXPORT_SYMBOL_GPL(range_0_20mA);
2c71c4ff H Hartley Sweeten 2013-04-03 37 const struct comedi_lrange range_4_20mA = { 1, {RANGE_mA(4, 20)} };
5660e742 H Hartley Sweeten 2013-04-12 38 EXPORT_SYMBOL_GPL(range_4_20mA);
2c71c4ff H Hartley Sweeten 2013-04-03 39 const struct comedi_lrange range_0_32mA = { 1, {RANGE_mA(0, 32)} };
5660e742 H Hartley Sweeten 2013-04-12 40 EXPORT_SYMBOL_GPL(range_0_32mA);
f0f29184 Mark Rankilor 2010-05-03 41 const struct comedi_lrange range_unknown = { 1, {{0, 1000000, UNIT_none} } };
5660e742 H Hartley Sweeten 2013-04-12 42 EXPORT_SYMBOL_GPL(range_unknown);
ed9eccbe David Schleef 2008-11-04 43 :::::: The code at line 35 was first introduced by commit
:::::: 2c71c4ff57a6564097bedd45bc589f73da798a3a staging: comedi: range: introduce some simple mA ranges
:::::: TO: H Hartley Sweeten <[email protected]> :::::: CC: Greg Kroah-Hartman <[email protected]>
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation