Skip to contentSkip to conversation

Patch "xhci: Make sure xhci handles USB_SPEED_SUPER_PLUS devices." has been added to the 4.4-stable tree

PATCH [email protected] 1 participant 1 message Sep 5, 2016

Subsystems (3)
lore
Share & tools
lore

[email protected]

author maintainer Applied
#0 lore raw

This is a note to let you know that I've just added the patch titled

xhci: Make sure xhci handles USB_SPEED_SUPER_PLUS devices.

to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
xhci-make-sure-xhci-handles-usb_speed_super_plus-devices.patch
and it can be found in the queue-4.4 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

Quoted 1 line

From 0caf6b33452112e5a1186c8c964e90310e49e6bd Mon Sep 17 00:00:00 2001

From: Mathias Nyman <[email protected]>
Date: Mon, 25 Jan 2016 15:30:44 +0200
Subject: xhci: Make sure xhci handles USB_SPEED_SUPER_PLUS devices.

From: Mathias Nyman <[email protected]>

commit 0caf6b33452112e5a1186c8c964e90310e49e6bd upstream.

In most cases the devices with the speed set to USB_SPEED_SUPER_PLUS are handled like regular SuperSpeed devices.

---
 drivers/usb/host/xhci-mem.c  |    9 ++++++---
 drivers/usb/host/xhci-ring.c |    3 ++-
 drivers/usb/host/xhci.c      |    7 +++++--
 3 files changed, 13 insertions(+), 6 deletions(-)
drivers/usb/host/xhci-mem.c +6 -3
@@ -1072,7 +1072,7 @@ static u32 xhci_find_real_port_number(st
 	struct usb_device *top_dev;
 	struct usb_hcd *hcd;
 
-	if (udev->speed == USB_SPEED_SUPER)
+	if (udev->speed >= USB_SPEED_SUPER)
 		hcd = xhci->shared_hcd;
 	else
 		hcd = xhci->main_hcd;
@@ -1107,6 +1107,7 @@ int xhci_setup_addressable_virt_dev(stru
 	/* 3) Only the control endpoint is valid - one endpoint context */
 	slot_ctx->dev_info |= cpu_to_le32(LAST_CTX(1) | udev->route);
 	switch (udev->speed) {
+	case USB_SPEED_SUPER_PLUS:
 	case USB_SPEED_SUPER:
 		slot_ctx->dev_info |= cpu_to_le32(SLOT_SPEED_SS);
 		max_packets = MAX_PACKET(512);
@@ -1294,6 +1295,7 @@ static unsigned int xhci_get_endpoint_in
 		}
 		/* Fall through - SS and HS isoc/int have same decoding */
 
+	case USB_SPEED_SUPER_PLUS:
 	case USB_SPEED_SUPER:
 		if (usb_endpoint_xfer_int(&ep->desc) ||
 		    usb_endpoint_xfer_isoc(&ep->desc)) {
@@ -1334,7 +1336,7 @@ static unsigned int xhci_get_endpoint_in
 static u32 xhci_get_endpoint_mult(struct usb_device *udev,
 		struct usb_host_endpoint *ep)
 {
-	if (udev->speed != USB_SPEED_SUPER ||
+	if (udev->speed < USB_SPEED_SUPER ||
 			!usb_endpoint_xfer_isoc(&ep->desc))
 		return 0;
 	return ep->ss_ep_comp.bmAttributes;
@@ -1384,7 +1386,7 @@ static u32 xhci_get_max_esit_payload(str
 			usb_endpoint_xfer_bulk(&ep->desc))
 		return 0;
 
-	if (udev->speed == USB_SPEED_SUPER)
+	if (udev->speed >= USB_SPEED_SUPER)
 		return le16_to_cpu(ep->ss_ep_comp.wBytesPerInterval);
 
 	max_packet = GET_MAX_PACKET(usb_endpoint_maxp(&ep->desc));
@@ -1455,6 +1457,7 @@ int xhci_endpoint_init(struct xhci_hcd *
 	max_packet = GET_MAX_PACKET(usb_endpoint_maxp(&ep->desc));
 	max_burst = 0;
 	switch (udev->speed) {
+	case USB_SPEED_SUPER_PLUS:
 	case USB_SPEED_SUPER:
 		/* dig out max burst from ep companion desc */
 		max_burst = ep->ss_ep_comp.bMaxBurst;
drivers/usb/host/xhci-ring.c +2 -1
@@ -3576,7 +3576,7 @@ static unsigned int xhci_get_burst_count
 {
 	unsigned int max_burst;
 
-	if (xhci->hci_version < 0x100 || udev->speed != USB_SPEED_SUPER)
+	if (xhci->hci_version < 0x100 || udev->speed < USB_SPEED_SUPER)
 		return 0;
 
 	max_burst = urb->ep->ss_ep_comp.bMaxBurst;
@@ -3602,6 +3602,7 @@ static unsigned int xhci_get_last_burst_
 		return 0;
 
 	switch (udev->speed) {
+	case USB_SPEED_SUPER_PLUS:
 	case USB_SPEED_SUPER:
 		/* bMaxBurst is zero based: 0 means 1 packet per burst */
 		max_burst = urb->ep->ss_ep_comp.bMaxBurst;
drivers/usb/host/xhci.c +5 -2
@@ -2073,6 +2073,7 @@ static unsigned int xhci_get_block_size(
 	case USB_SPEED_HIGH:
 		return HS_BLOCK;
 	case USB_SPEED_SUPER:
+	case USB_SPEED_SUPER_PLUS:
 		return SS_BLOCK;
 	case USB_SPEED_UNKNOWN:
 	case USB_SPEED_WIRELESS:
@@ -2198,7 +2199,7 @@ static int xhci_check_bw_table(struct xh
 	unsigned int packets_remaining = 0;
 	unsigned int i;
 
-	if (virt_dev->udev->speed == USB_SPEED_SUPER)
+	if (virt_dev->udev->speed >= USB_SPEED_SUPER)
 		return xhci_check_ss_bw(xhci, virt_dev);
 
 	if (virt_dev->udev->speed == USB_SPEED_HIGH) {
@@ -2399,7 +2400,7 @@ void xhci_drop_ep_from_interval_table(st
 	if (xhci_is_async_ep(ep_bw->type))
 		return;
 
-	if (udev->speed == USB_SPEED_SUPER) {
+	if (udev->speed >= USB_SPEED_SUPER) {
 		if (xhci_is_sync_in_ep(ep_bw->type))
 			xhci->devs[udev->slot_id]->bw_table->ss_bw_in -=
 				xhci_get_ss_bw_consumed(ep_bw);
@@ -2437,6 +2438,7 @@ void xhci_drop_ep_from_interval_table(st
 		interval_bw->overhead[HS_OVERHEAD_TYPE] -= 1;
 		break;
 	case USB_SPEED_SUPER:
+	case USB_SPEED_SUPER_PLUS:
 	case USB_SPEED_UNKNOWN:
 	case USB_SPEED_WIRELESS:
 		/* Should never happen because only LS/FS/HS endpoints will get
@@ -2496,6 +2498,7 @@ static void xhci_add_ep_to_interval_tabl
 		interval_bw->overhead[HS_OVERHEAD_TYPE] += 1;
 		break;
 	case USB_SPEED_SUPER:
+	case USB_SPEED_SUPER_PLUS:
 	case USB_SPEED_UNKNOWN:
 	case USB_SPEED_WIRELESS:
 		/* Should never happen because only LS/FS/HS endpoints will get

Patches currently in stable-queue which might be from [email protected] are

queue-4.4/xhci-make-sure-xhci-handles-usb_speed_super_plus-devices.patch queue-4.4/xhci-don-t-dereference-a-xhci-member-after-removing-xhci.patch queue-4.4/usb-xhci-fix-panic-if-disconnect.patch queue-4.4/usb-define-usb_speed_super_plus-speed-for-superspeedplus-usb3.1-devices.patch queue-4.4/xhci-always-handle-command-ring-stopped-events.patch