FAILED: patch "[PATCH] drm/i915: Acquire audio powerwell for HD-Audio registers" failed to apply to 4.4-stable tree
Subsystems (3)
[email protected]
maintainerThe patch below does not apply to the 4.4-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
Quoted 1 line
From
3cffb0a44750726cdc1cc07399efe3cbb45e028bMon Sep 17 00:00:00 2001
From: Chris Wilson <[email protected]>
Date: Wed, 3 Aug 2016 17:09:00 +0100
Subject: [PATCH] drm/i915: Acquire audio powerwell for HD-Audio registers
On Haswell/Broadwell, the HD-Audio block is inside the HDMI/display power well and so the sna-hda audio codec acquires the display power well while it is operational. However, Skylake separates the powerwells again, but yet we still need the audio powerwell to setup the registers. (But then the hardware uses those registers even while powered off???)
Acquiring the powerwell around setting the chicken bits when setting up the audio channel does at least silence the WARNs from touching our registers whilst unpowered. We silence our own test cases, but maybe there is a latent bug in using the audio channel?
v2: Grab both rpm wakelock and audio wakelock
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96214
drivers/gpu/drm/i915/intel_audio.c +6 -0
@@ -600,6 +600,8 @@ static void i915_audio_component_codec_wake_override(struct device *dev,if (!IS_SKYLAKE (dev_priv) && !IS_KABYLAKE (dev_priv))return ; +i915_audio_component_get_power (dev); +/* * Enable/disable generating the codec wake signal, overriding the * internal logic to generate the codec wake to controller.
@@ -615,6 +617,8 @@ static void i915_audio_component_codec_wake_override(struct device *dev,I915_WRITE (HSW_AUD_CHICKENBIT , tmp);usleep_range (1000 ,1500 ); } + +i915_audio_component_put_power (dev); }/* Get CDCLK in kHz */
@@ -648,6 +652,7 @@ static int i915_audio_component_sync_audio_rate(struct device *dev, !IS_HASWELL(dev_priv))return 0 ; +i915_audio_component_get_power (dev);mutex_lock (&dev_priv->av_mutex);/* 1. get the pipe */ intel_encoder = dev_priv->dig_port_map[port];
@@ -698,6 +703,7 @@ static int i915_audio_component_sync_audio_rate(struct device *dev, unlock:mutex_unlock (&dev_priv->av_mutex); +i915_audio_component_put_power (dev);return err; }