ASoC: add rt5663 codec driver
Subsystems (4)
PATCH 1/1 ASoC: add rt5663 codec driver
This is the initial codec driver for both rt5663 rt5668 codec.
Signed-off-by John Lin <[email protected]>
Signed-off-by Jack Yu <[email protected]>
Signed-off-by Bard Liao <[email protected]>
--- Documentation/devicetree/bindings/sound/rt5663.txt | 30 + sound/soc/codecs/Kconfig | 6 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/rt5663.c | 3216 ++++++++++++++++++++ sound/soc/codecs/rt5663.h | 1121 +++++++ 5 files changed, 4375 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/rt5663.txt create mode 100644 sound/soc/codecs/rt5663.c create mode 100644 sound/soc/codecs/rt5663.h
Documentation/devicetree/bindings/sound/rt5663.txt new file +30 -0
@@ -0,0 +1,30 @@ +RT5663/RT5668 audio CODEC + +This device supports I2C only. + +Required properties: + +- compatible : One of "realtek,rt5663" or "realtek,rt5668". + +- reg : The I2C address of the device. + +- interrupts : The CODEC's interrupt output. + +Optional properties: + +Pins on the device (for linking into audio routes) for RT5645/RT5650: + + * IN1P + * IN1N + * IN2P + * IN2N + * HPOL + * HPOR + +Example: + +codec: rt5663@12 { + compatible = "realtek,rt5663"; + reg = <0x12>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; +};
sound/soc/codecs/Kconfig +6 -0
@@ -113,6 +113,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_RT5645 if I2C select SND_SOC_RT5651 if I2C select SND_SOC_RT5659 if I2C + select SND_SOC_RT5663 if I2C select SND_SOC_RT5670 if I2C select SND_SOC_RT5677 if I2C && SPI_MASTER select SND_SOC_SGTL5000 if I2C
@@ -646,6 +647,7 @@ config SND_SOC_RL6231 default y if SND_SOC_RT5645=y default y if SND_SOC_RT5651=y default y if SND_SOC_RT5659=y + default y if SND_SOC_RT5663=y default y if SND_SOC_RT5670=y default y if SND_SOC_RT5677=y default m if SND_SOC_RT5514=m
@@ -654,6 +656,7 @@ config SND_SOC_RL6231 default m if SND_SOC_RT5645=m default m if SND_SOC_RT5651=m default m if SND_SOC_RT5659=m + default m if SND_SOC_RT5663=m default m if SND_SOC_RT5670=m default m if SND_SOC_RT5677=m
@@ -698,6 +701,9 @@ config SND_SOC_RT5651 config SND_SOC_RT5659 tristate +config SND_SOC_RT5663 + tristate + config SND_SOC_RT5670 tristate
sound/soc/codecs/Makefile +2 -0
@@ -113,6 +113,7 @@ snd-soc-rt5640-objs := rt5640.o snd-soc-rt5645-objs := rt5645.o snd-soc-rt5651-objs := rt5651.o snd-soc-rt5659-objs := rt5659.o +snd-soc-rt5663-objs := rt5663.o snd-soc-rt5670-objs := rt5670.o snd-soc-rt5677-objs := rt5677.o snd-soc-rt5677-spi-objs := rt5677-spi.o
@@ -335,6 +336,7 @@ obj-$(CONFIG_SND_SOC_RT5640) += snd-soc-rt5640.o obj-$(CONFIG_SND_SOC_RT5645) += snd-soc-rt5645.o obj-$(CONFIG_SND_SOC_RT5651) += snd-soc-rt5651.o obj-$(CONFIG_SND_SOC_RT5659) += snd-soc-rt5659.o +obj-$(CONFIG_SND_SOC_RT5663) += snd-soc-rt5663.o obj-$(CONFIG_SND_SOC_RT5670) += snd-soc-rt5670.o obj-$(CONFIG_SND_SOC_RT5677) += snd-soc-rt5677.o obj-$(CONFIG_SND_SOC_RT5677_SPI) += snd-soc-rt5677-spi.o
sound/soc/codecs/rt5663.c new file +3216 -0
2,926 lines not on this page · raw message
sound/soc/codecs/rt5663.h new file +1121 -0
1,121 lines not on this page · raw message
The rest of this diff is not shown. View the raw message.
Signature · 1 line
1.8.1.1.439.g50a6b54
Part of the diff is not shown here. View the raw message.