mkefidisk.wks: use partition UUID and GPT partition table
PATCH 1/1 mkefidisk.wks: use partition UUID and GPT partition table
This is a preparation to use mkefidisk as a default wks for genericx86* BSPs. This change enables usage of partition UUID instead of device name to specify root partition in kernel command line. It should make images to boot on devices with boot device names that differ from what's mentioned in wks file.
--- scripts/lib/wic/canned-wks/mkefidisk.wks | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
scripts/lib/wic/canned-wks/mkefidisk.wks +2 -2
@@ -4,8 +4,8 @@ part /boot --source bootimg-efi --sourceparams="loader=grub-efi" --ondisk sda --label msdos --active --align 1024 -part / --source rootfs --ondisk sda --fstype=ext4 --label platform --align 1024 +part / --source rootfs --ondisk sda --fstype=ext4 --label platform --align 1024 --use-uuid part swap --ondisk sda --size 44 --label swap1 --fstype=swap -bootloader --timeout=10 --append="rootwait rootfstype=ext4 console=ttyPCH0,115200 console=tty0 vmalloc=256MB snd-hda-intel.enable_msi=0" +bootloader --ptable gpt --timeout=10 --append="rootwait rootfstype=ext4 console=ttyPCH0,115200 console=tty0 vmalloc=256MB snd-hda-intel.enable_msi=0"
Signature · 1 line
2.1.4
Saul Wold
NAKQuoted 26 lines · Ed Bartosh
This is a preparation to use mkefidisk as a default wks for genericx86* BSPs. This change enables usage of partition UUID instead of device name to specify root partition in kernel command line. It should make images to boot on devices with boot device names that differ from what's mentioned in wks file.
Signed-off-by Ed Bartosh <[email protected]>---
scripts/lib/wic/canned-wks/mkefidisk.wks | 4 ++--1 file changed, 2 insertions(+), 2 deletions(-)scripts/lib/wic/canned-wks/mkefidisk.wks +0
-0@@ -4,8 +4,8 @@
part /boot --source bootimg-efi --sourceparams="loader=grub-efi" -- ondisk sda --label msdos --active --align 1024scripts/lib/wic/canned-wks/mkefidisk.wks +1
-3-part / --source rootfs --ondisk sda --fstype=ext4 --label platform --align 1024 +part / --source rootfs --ondisk sda --fstype=ext4 --label platform --align 1024 --use-uuid
Quoted 8 lines
part swap --ondisk sda --size 44 --label swap1 --fstype=swap
-bootloader --timeout=10 --append="rootwait rootfstype=ext4 console=ttyPCH0,115200 console=tty0 vmalloc=256MB snd-hda- intel.enable_msi=0"
+bootloader --ptable gpt --timeout=10 --append="rootwait rootfstype=ext4 console=ttyPCH0,115200 console=tty0 vmalloc=256MB snd-hda-intel.enable_msi=0"
NAK!
Not all devices can handle GPT correct it seems, I can't use this version to boot a Turobot for example, where is was usable before.
The use-uuid works.
Sau!
Quoted 3 lines
--
2.1.4