Link Training Compliance support, link rate fallback sending Uevent
Subsystems (2)
cover Link Training Compliance support, link rate fallback sending Uevent
This adds support in the kernel to handle link training compliance requests and send a uevent to train at requested parameters.
In this patch series, if the link training fails in modeset, then a hotplug uevent is added to a work queue and scheduled and failed link parameters are stored in intel_dp structure. This uevent
gets executed after the modeset is completed and after locks are released. In the modeset retry, modes are validated based on lower link rate from the failed link rate value to prune the modes in intel_dp_mode_valid(). The lower link rate is then used toc onfigure the pipe and link is retrained at this lower link rate.
I have tested this with DPR-120 and the compliance tests are passing. The DP CTS spec is based on DP 1.2 spec and it only expects to reduce the link rate and train at the max lane count without reducing the lane count. Lane count reduction is added in DP 1.3 so Unigraf has agreed to add it to their next SW release. Hence I have not implemented fallback for lane count. But I can add it if you think we should add DP 1.3 link training algorithm.
Please let me know your feedback on this. Compliance app is not required for link training tests and so I have tested this fallback using kernel console mode on Source DUT.
Manasi Navare (4):
drm/i915; Add a function to return index of link rate drm/i915: Add support for DP link training compliance drm/i915: Link Rate fallback on Link training failure drm/i915: Work queue for uevent
Navare, Manasi D (1):
drm/i915: Change the placement of some static functions in intel_dp.c
drivers/gpu/drm/i915/i915_drv.h | 2 + drivers/gpu/drm/i915/intel_ddi.c | 10 +- drivers/gpu/drm/i915/intel_dp.c | 277 ++++++++++++++++++-------- drivers/gpu/drm/i915/intel_dp_link_training.c | 12 +- drivers/gpu/drm/i915/intel_drv.h | 8 +- 5 files changed, 217 insertions(+), 92 deletions(-)
Signature · 6 lines
1.9.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
RFC 1/5 drm/i915: Change the placement of some static functions in intel_dp.c
From: "Navare, Manasi D" <[email protected]>
These static helper functions are required to be used during fallback link rate implemnetation so they need to be placed at the top of the file.
v3:
* Add cleanup to other patch (Mika Kahola)
v2:
* Dont move around functions declared in intel_drv.h (Rodrigo Vivi)
--- drivers/gpu/drm/i915/intel_dp.c | 150 ++++++++++++++++++++-------------------- 1 file changed, 75 insertions(+), 75 deletions(-)
drivers/gpu/drm/i915/intel_dp.c +75 -75
@@ -213,6 +213,81 @@ intel_dp_downstream_max_dotclock(struct intel_dp *intel_dp)return max_dotclk; } +static int +intel_dp_sink_rates (struct intel_dp *intel_dp,const int **sink_rates) +{ +if (intel_dp->num_sink_rates) { + *sink_rates = intel_dp->sink_rates; +return intel_dp->num_sink_rates; + } + + *sink_rates = default_rates; + +return (intel_dp_max_link_bw (intel_dp) >>3 ) +1 ; +} + +static int +intel_dp_source_rates (struct intel_dp *intel_dp,const int **source_rates) +{ +struct intel_digital_port *dig_port =dp_to_dig_port (intel_dp); +struct drm_device *dev = dig_port->base.base.dev; +int size; + +if (IS_BROXTON (dev)) { + *source_rates = bxt_rates; + size =ARRAY_SIZE (bxt_rates); + }else if (IS_SKYLAKE (dev) ||IS_KABYLAKE (dev)) { + *source_rates = skl_rates; + size =ARRAY_SIZE (skl_rates); + }else { + *source_rates = default_rates; + size =ARRAY_SIZE (default_rates); + } + +/* This depends on the fact that 5.4 is last value in the array */ +if (!intel_dp_source_supports_hbr2 (intel_dp)) + size--; + +return size; +} + +static int intersect_rates (const int *source_rates,int source_len, +const int *sink_rates,int sink_len, +int *common_rates) +{ +int i =0 , j =0 , k =0 ; + +while (i < source_len && j < sink_len) { +if (source_rates[i] == sink_rates[j]) { +if (WARN_ON (k >=DP_MAX_SUPPORTED_RATES )) +return k; + common_rates[k] = source_rates[i]; + ++k; + ++i; + ++j; + }else if (source_rates[i] < sink_rates[j]) { + ++i; + }else { + ++j; + } + } +return k; +} + +static int intel_dp_common_rates (struct intel_dp *intel_dp, +int *common_rates) +{ +const int *source_rates, *sink_rates; +int source_len, sink_len; + + sink_len =intel_dp_sink_rates (intel_dp, &sink_rates); + source_len =intel_dp_source_rates (intel_dp, &source_rates); + +return intersect_rates (source_rates, source_len, + sink_rates, sink_len, + common_rates); +} +static enum drm_mode_status intel_dp_mode_valid (struct drm_connector *connector,struct drm_display_mode *mode)
@@ -1281,19 +1356,6 @@ intel_dp_aux_init(struct intel_dp *intel_dp) intel_dp->aux.transfer = intel_dp_aux_transfer; } -static int -intel_dp_sink_rates (struct intel_dp *intel_dp,const int **sink_rates) -{ -if (intel_dp->num_sink_rates) { - *sink_rates = intel_dp->sink_rates; -return intel_dp->num_sink_rates; - } - - *sink_rates = default_rates; - -return (intel_dp_max_link_bw (intel_dp) >>3 ) +1 ; -} -bool intel_dp_source_supports_hbr2 (struct intel_dp *intel_dp) {struct intel_digital_port *dig_port =dp_to_dig_port (intel_dp);
@@ -1306,31 +1368,6 @@ bool intel_dp_source_supports_hbr2(struct intel_dp *intel_dp)return false; } -static int -intel_dp_source_rates (struct intel_dp *intel_dp,const int **source_rates) -{ -struct intel_digital_port *dig_port =dp_to_dig_port (intel_dp); -struct drm_i915_private *dev_priv =to_i915 (dig_port->base.base.dev); -int size; - -if (IS_BROXTON (dev_priv)) { - *source_rates = bxt_rates; - size =ARRAY_SIZE (bxt_rates); - }else if (IS_SKYLAKE (dev_priv) ||IS_KABYLAKE (dev_priv)) { - *source_rates = skl_rates; - size =ARRAY_SIZE (skl_rates); - }else { - *source_rates = default_rates; - size =ARRAY_SIZE (default_rates); - } - -/* This depends on the fact that 5.4 is last value in the array */ -if (!intel_dp_source_supports_hbr2 (intel_dp)) - size--; - -return size; -} -static void intel_dp_set_clock (struct intel_encoder *encoder,struct intel_crtc_state *pipe_config)
@@ -1364,43 +1401,6 @@ intel_dp_set_clock(struct intel_encoder *encoder, } } -static int intersect_rates (const int *source_rates,int source_len, -const int *sink_rates,int sink_len, -int *common_rates) -{ -int i =0 , j =0 , k =0 ; - -while (i < source_len && j < sink_len) { -if (source_rates[i] == sink_rates[j]) { -if (WARN_ON (k >=DP_MAX_SUPPORTED_RATES )) -return k; - common_rates[k] = source_rates[i]; - ++k; - ++i; - ++j; - }else if (source_rates[i] < sink_rates[j]) { - ++i; - }else { - ++j; - } - } -return k; -} - -static int intel_dp_common_rates (struct intel_dp *intel_dp, -int *common_rates) -{ -const int *source_rates, *sink_rates; -int source_len, sink_len; - - sink_len =intel_dp_sink_rates (intel_dp, &sink_rates); - source_len =intel_dp_source_rates (intel_dp, &source_rates); - -return intersect_rates (source_rates, source_len, - sink_rates, sink_len, - common_rates); -} -static void snprintf_int_array (char *str,size_t len,const int *array,int nelem) {
Signature · 6 lines
1.9.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
RFC 2/5 drm/i915; Add a function to return index of link rate
In reply to Manasi NavareThis is required to return the index of link rate into common_rates array. This gets used to retry the link training at lower link rate.
--- drivers/gpu/drm/i915/intel_dp.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+)
drivers/gpu/drm/i915/intel_dp.c +15 -0
@@ -288,6 +288,21 @@ static int intel_dp_common_rates(struct intel_dp *intel_dp, common_rates); } +static int intel_dp_link_rate_index (struct intel_dp *intel_dp,int *common_rates, +int link_rate) +{ +int common_len; +int index; + + common_len =intel_dp_common_rates (intel_dp, common_rates); +for (index =0 ; index < common_len; index++) { +if (link_rate == common_rates[common_len - index -1 ]) +return common_len - index -1 ; + } + +return -1 ; +} +static enum drm_mode_status intel_dp_mode_valid (struct drm_connector *connector,struct drm_display_mode *mode)
Signature · 6 lines
1.9.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
RFC 3/5 drm/i915: Add support for DP link training compliance
In reply to Manasi NavareThis patch adds support to handle automated DP compliance link training test requests. This patch has been tested with Unigraf DPR-120 DP Compliance device for testing Link Training Compliance.
After we get a short pulse Compliance test request, test request values are read and hotplug uevent is sent in order to trigger another modeset during which the pipe is configured and link is enabled for link parameters requested by the test.
--- drivers/gpu/drm/i915/intel_dp.c | 71 ++++++++++++++++++++++++++++++++++------ drivers/gpu/drm/i915/intel_drv.h | 2 ++ 2 files changed, 63 insertions(+), 10 deletions(-)
drivers/gpu/drm/i915/intel_dp.c +61 -10
@@ -1567,6 +1567,7 @@ intel_dp_compute_config(struct intel_encoder *encoder,/* Conveniently, the link BW constants become indices with a shift...*/ int min_clock =0 ;int max_clock; +int link_rate_index;int bpp, mode_rate;int link_avail, link_clock;int common_rates[DP_MAX_SUPPORTED_RATES ] = {};
@@ -1608,6 +1609,20 @@ intel_dp_compute_config(struct intel_encoder *encoder,if (adjusted_mode->flags &DRM_MODE_FLAG_DBLCLK )return false; +/* Use values requested by Compliance Test Request */ +if (intel_dp->compliance_test_link_rate && + intel_dp->compliance_test_lane_count) { + link_rate_index =intel_dp_link_rate_index (intel_dp, + common_rates, +drm_dp_bw_code_to_link_rate (intel_dp->compliance_test_link_rate)); +if (link_rate_index >=0 ) + min_clock = max_clock = link_rate_index; + min_lane_count = max_lane_count = intel_dp->compliance_test_lane_count; + + intel_dp->compliance_test_link_rate =0 ; + intel_dp->compliance_test_lane_count =0 ; + } + DRM_DEBUG_KMS("DP link computation with max lane count %i " "max bw %d pixel clock %iKHz\n", max_lane_count, common_rates[max_clock],
@@ -1655,6 +1670,7 @@ intel_dp_compute_config(struct intel_encoder *encoder, } } } + }return false;
@@ -3835,6 +3851,29 @@ intel_dp_get_sink_irq_esi(struct intel_dp *intel_dp, u8 *sink_irq_vector)static uint8_t intel_dp_autotest_link_training (struct intel_dp *intel_dp) {uint8_t test_result =DP_TEST_ACK ; +int status =0 ; +/* (DP CTS 1.2) +* 4.3.1.11 +*/ +/* Read the TEST_LANE_COUNT and TEST_LINK_RTAE fields (DP CTS 3.1.4) */ + status =drm_dp_dpcd_readb (&intel_dp->aux,DP_TEST_LANE_COUNT , + &intel_dp->compliance_test_lane_count); + +if (status <=0 ) { +DRM_DEBUG_KMS ("Could not read test lane count from " +"reference sink\n" ); +return 0 ; + } + intel_dp->compliance_test_lane_count &=DP_MAX_LANE_COUNT_MASK ; + + status =drm_dp_dpcd_readb (&intel_dp->aux,DP_TEST_LINK_RATE , + &intel_dp->compliance_test_link_rate); +if (status <=0 ) { +DRM_DEBUG_KMS ("Could not read test link rate from " +"refernce sink\n" ); +return 0 ; + } +return test_result; }
@@ -3935,11 +3974,14 @@ static void intel_dp_handle_test_request(struct intel_dp *intel_dp) } update_status: - status =drm_dp_dpcd_write (&intel_dp->aux, -DP_TEST_RESPONSE , - &response,1 ); -if (status <=0 ) -DRM_DEBUG_KMS ("Could not write test response to sink\n" ); +if (intel_dp->compliance_test_type ==DP_TEST_LINK_TRAINING ) { + status =drm_dp_dpcd_write (&intel_dp->aux, +DP_TEST_RESPONSE , + &response,1 ); +if (status <=0 ) +DRM_DEBUG_KMS ("Could not write test response " +"to sink\n" ); + } } static int
@@ -4019,9 +4061,7 @@ intel_dp_check_link_status(struct intel_dp *intel_dp)if (!to_intel_crtc (intel_encoder->base.crtc)->active)return ; -/* if link training is requested we should perform it always */ -if ((intel_dp->compliance_test_type ==DP_TEST_LINK_TRAINING ) || - (!drm_dp_channel_eq_ok (link_status, intel_dp->lane_count))) { +if ((!drm_dp_channel_eq_ok (link_status, intel_dp->lane_count))) {DRM_DEBUG_KMS ("%s: channel EQ not ok, retraining\n" , intel_encoder->base.name);intel_dp_start_link_train (intel_dp);
@@ -4046,6 +4086,7 @@ static bool intel_dp_short_pulse(struct intel_dp *intel_dp) {struct drm_device *dev =intel_dp_to_dev (intel_dp); +struct intel_encoder *intel_encoder = &dp_to_dig_port (intel_dp)->base;u8 sink_irq_vector =0 ;u8 old_sink_count = intel_dp->sink_count;bool ret;
@@ -4080,8 +4121,9 @@ intel_dp_short_pulse(struct intel_dp *intel_dp)DP_DEVICE_SERVICE_IRQ_VECTOR , sink_irq_vector); -if (sink_irq_vector &DP_AUTOMATED_TEST_REQUEST ) -DRM_DEBUG_DRIVER ("Test request in short pulse not handled\n" ); +if (sink_irq_vector &DP_AUTOMATED_TEST_REQUEST ) { +intel_dp_handle_test_request (intel_dp); + }if (sink_irq_vector & (DP_CP_IRQ |DP_SINK_SPECIFIC_IRQ ))DRM_DEBUG_DRIVER ("CP or sink specific irq unhandled\n" ); }
@@ -4089,6 +4131,10 @@ intel_dp_short_pulse(struct intel_dp *intel_dp)drm_modeset_lock (&dev->mode_config.connection_mutex,NULL );intel_dp_check_link_status (intel_dp);drm_modeset_unlock (&dev->mode_config.connection_mutex); +if ((intel_dp->compliance_test_type ==DP_TEST_LINK_TRAINING )) { +/* Send a Hotplug Uevent to userspace to start modeset */ +drm_kms_helper_hotplug_event (intel_encoder->base.dev); + }return true; }
@@ -4366,6 +4412,11 @@ intel_dp_long_pulse(struct intel_connector *intel_connector)/* Can't disconnect eDP, but you can close the lid... */ if (is_edp (intel_dp)) status =edp_detect (intel_dp); +else if (intel_dp->compliance_test_type ==DP_TEST_LINK_TRAINING ) { + status = connector_status_disconnected; + intel_dp->compliance_test_type =0 ; + goto out; + }else if (intel_digital_port_connected (to_i915 (dev),dp_to_dig_port (intel_dp))) status =intel_dp_detect_dpcd (intel_dp);
drivers/gpu/drm/i915/intel_drv.h +2 -0
@@ -951,6 +951,8 @@ struct intel_dp {unsigned long compliance_test_type;unsigned long compliance_test_data;bool compliance_test_active; +u8 compliance_test_lane_count; +u8 compliance_test_link_rate; };struct intel_digital_port {
Signature · 6 lines
1.9.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
RFC 4/5 drm/i915: Link Rate fallback on Link training failure
In reply to Manasi NavareIf link training at a link rate optimal for a particular mode fails during modeset's atomic commit phase, then we let the modeset complete and then retry. We save the link rate value at which link training failed and use a lower link rate to prune the modes during the next modeset, configure the pipe at lower link rate and retrian at lower link rate.
This is also required to pass DP CTS tests 4.3.1.3, 4.3.1.4, 4.3.1.6.
--- drivers/gpu/drm/i915/intel_ddi.c | 10 ++++++++- drivers/gpu/drm/i915/intel_dp.c | 31 ++++++++++++++++++++++++--- drivers/gpu/drm/i915/intel_dp_link_training.c | 12 ++++++++--- drivers/gpu/drm/i915/intel_drv.h | 6 +++++- 4 files changed, 51 insertions(+), 8 deletions(-)
drivers/gpu/drm/i915/intel_ddi.c +9 -1
@@ -1652,7 +1652,15 @@ static void intel_ddi_pre_enable_dp(struct intel_encoder *encoder,intel_prepare_dp_ddi_buffers (encoder);intel_ddi_init_dp_buf_reg (encoder);intel_dp_sink_dpms (intel_dp,DRM_MODE_DPMS_ON ); -intel_dp_start_link_train (intel_dp); +if (!intel_dp_start_link_train (intel_dp)) { +DRM_ERROR ("Link Training failed at link rate = %d, lane count = %d" , + link_rate, lane_count); + intel_dp->link_train_failed = true; + intel_dp->link_train_failed_link_rate = link_rate; + intel_dp->link_train_failed_lane_count = lane_count; +/* Schedule a Hotplug Uevent to userspace to start modeset */ +schedule_work (&dev_priv->i915_modeset_retry_work); + }if (port !=PORT_A ||INTEL_GEN (dev_priv) >=9 )intel_dp_stop_link_train (intel_dp); }
drivers/gpu/drm/i915/intel_dp.c +28 -3
@@ -313,6 +313,7 @@ intel_dp_mode_valid(struct drm_connector *connector,int target_clock = mode->clock;int max_rate, mode_rate, max_lanes, max_link_clock;int max_dotclk; +int common_rates[DP_MAX_SUPPORTED_RATES ] = {}; max_dotclk =intel_dp_downstream_max_dotclock (intel_dp);
@@ -326,8 +327,22 @@ intel_dp_mode_valid(struct drm_connector *connector, target_clock = fixed_mode->clock; } - max_link_clock =intel_dp_max_link_rate (intel_dp); - max_lanes =intel_dp_max_lane_count (intel_dp); +/* Prune the modes based on the link rate that failed */ +if (intel_dp->link_train_failed_link_rate) { + intel_dp->link_rate_index =intel_dp_link_rate_index (intel_dp, + common_rates, + intel_dp->link_train_failed_link_rate); +if (intel_dp->link_rate_index >0 ) { + max_link_clock = common_rates[intel_dp->link_rate_index -1 ]; + max_lanes =intel_dp_max_lane_count (intel_dp); + }else +/* Here we can lower the lane count, but that is DP 1.3 not 1.2 */ +DRM_ERROR (" No Valid Mode Supported for this Link" ); + } +else { + max_link_clock =intel_dp_max_link_rate (intel_dp); + max_lanes =intel_dp_max_lane_count (intel_dp); + } max_rate =intel_dp_max_data_rate (max_link_clock, max_lanes); mode_rate =intel_dp_link_required (target_clock,18 );
@@ -1623,6 +1638,14 @@ intel_dp_compute_config(struct intel_encoder *encoder, intel_dp->compliance_test_lane_count =0 ; } +/* Fall back to lower link rate in case of failure in previous modeset */ +if (intel_dp->link_train_failed_link_rate) { + min_lane_count = max_lane_count; + min_clock = max_clock = intel_dp->link_rate_index -1 ; + intel_dp->link_train_failed_link_rate =0 ; + intel_dp->link_rate_index =-1 ; + } + DRM_DEBUG_KMS("DP link computation with max lane count %i " "max bw %d pixel clock %iKHz\n", max_lane_count, common_rates[max_clock],
@@ -4412,9 +4435,11 @@ intel_dp_long_pulse(struct intel_connector *intel_connector)/* Can't disconnect eDP, but you can close the lid... */ if (is_edp (intel_dp)) status =edp_detect (intel_dp); -else if (intel_dp->compliance_test_type ==DP_TEST_LINK_TRAINING ) { +else if (intel_dp->compliance_test_type ==DP_TEST_LINK_TRAINING || + intel_dp->link_train_failed) { status = connector_status_disconnected; intel_dp->compliance_test_type =0 ; + intel_dp->link_train_failed = false; goto out; } else if (intel_digital_port_connected(to_i915(dev),
drivers/gpu/drm/i915/intel_dp_link_training.c +9 -3
@@ -310,9 +310,15 @@ void intel_dp_stop_link_train(struct intel_dp *intel_dp) DP_TRAINING_PATTERN_DISABLE); } -void +bool intel_dp_start_link_train (struct intel_dp *intel_dp) { -intel_dp_link_training_clock_recovery (intel_dp); -intel_dp_link_training_channel_equalization (intel_dp); +bool ret; + +if (intel_dp_link_training_clock_recovery (intel_dp)) { + ret =intel_dp_link_training_channel_equalization (intel_dp); +if (ret) +return true; + } +return false; }
drivers/gpu/drm/i915/intel_drv.h +5 -1
@@ -882,6 +882,10 @@ struct intel_dp {uint32_t DP ;int link_rate;uint8_t lane_count; +int link_train_failed_link_rate; +uint8_t link_train_failed_lane_count; +int link_rate_index; +bool link_train_failed;uint8_t sink_count;bool link_mst;bool has_audio;
@@ -1389,7 +1393,7 @@ bool intel_dp_init_connector(struct intel_digital_port *intel_dig_port,void intel_dp_set_link_params (struct intel_dp *intel_dp,int link_rate,uint8_t lane_count,bool link_mst); -void intel_dp_start_link_train (struct intel_dp *intel_dp); +bool intel_dp_start_link_train (struct intel_dp *intel_dp);void intel_dp_stop_link_train (struct intel_dp *intel_dp);void intel_dp_sink_dpms (struct intel_dp *intel_dp,int mode);void intel_dp_encoder_reset (struct drm_encoder *encoder);
Signature · 6 lines
1.9.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
RFC 5/5 drm/i915: Work queue for uevent
In reply to Manasi NavareWe create a work queue for sending a hotplug uevent. This gets scheduled on link training failure and gets executed after modeset is finished and all locks are released.
This was required to avoid deadlock.
--- drivers/gpu/drm/i915/i915_drv.h | 2 ++ drivers/gpu/drm/i915/intel_dp.c | 12 ++++++++++++ 2 files changed, 14 insertions(+)
drivers/gpu/drm/i915/i915_drv.h +2 -0
@@ -1962,6 +1962,8 @@ struct drm_i915_private {struct drm_i915_gem_object *vlv_pctx; +struct work_struct i915_modeset_retry_work; +#ifdef CONFIG_DRM_FBDEV_EMULATION /* list of fbdev register on this device */ struct intel_fbdev *fbdev;
drivers/gpu/drm/i915/intel_dp.c +12 -0
@@ -5716,6 +5716,15 @@ out_vdd_off:return false; } +static void intel_dp_modeset_retry_work_fn (struct work_struct *work) +{ +struct drm_i915_private *dev_priv; + + dev_priv =container_of (work,typeof (*dev_priv), i915_modeset_retry_work); +DRM_DEBUG_KMS ("\nManasi: Sending Uevent" ); +drm_kms_helper_hotplug_event (&dev_priv->drm); +} +bool intel_dp_init_connector (struct intel_digital_port *intel_dig_port,struct intel_connector *intel_connector)
@@ -5728,6 +5737,9 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,enum port port = intel_dig_port->port;int type; +/* Initialize the work for modeset in case of link train failure */ +INIT_WORK (&dev_priv->i915_modeset_retry_work, intel_dp_modeset_retry_work_fn); +if (WARN (intel_dig_port->max_lanes <1 ,"Not enough lanes (%d) for DP on port %c\n" , intel_dig_port->max_lanes,port_name (port)))
Signature · 6 lines
1.9.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx