Staging: fbtft: Fixed open parenthesis alignment check

PATCH New Harman Kalra 1 participant 1 message Oct 9, 2016

Subsystems (2)

Staging Fbtft Framebuffer drivers

lore

Share & tools

lore

Harman Kalra

author

2016-10-09 14:44 UTC #0 lore raw

PATCH 1/1 Staging: fbtft: Fixed open parenthesis alignment check

This patch resolves all the following CHECKs caught by checkpatch.pl
CHECK: Alignment should match open parenthesis

Signed-off-by Harman Kalra <[email protected]>

---
 drivers/staging/fbtft/fb_ili9325.c |    9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

drivers/staging/fbtft/fb_ili9325.c +3 -6

index c31e2e0..4ab4479 100644
@@ -38,18 +38,15 @@
 
 static unsigned int vc = 0x03; /* Vci1=Vci*0.80 */
 module_param(vc, uint, 0);
-MODULE_PARM_DESC(vc,
-"Sets the ratio factor of Vci to generate the reference voltages Vci1");
+MODULE_PARM_DESC(vc, "Sets the ratio factor of Vci to generate the reference voltages Vci1");
 
 static unsigned int vrh = 0x0d; /* VREG1OUT=Vci*1.85 */
 module_param(vrh, uint, 0);
-MODULE_PARM_DESC(vrh,
-"Set the amplifying rate (1.6 ~ 1.9) of Vci applied to output the VREG1OUT");
+MODULE_PARM_DESC(vrh, "Set the amplifying rate (1.6 ~ 1.9) of Vci applied to output the VREG1OUT");
 
 static unsigned int vdv = 0x12; /* VCOMH amplitude=VREG1OUT*0.98 */
 module_param(vdv, uint, 0);
-MODULE_PARM_DESC(vdv,
-"Select the factor of VREG1OUT to set the amplitude of Vcom");
+MODULE_PARM_DESC(vdv, "Select the factor of VREG1OUT to set the amplitude of Vcom");
 
 static unsigned int vcm = 0x0a; /* VCOMH=VREG1OUT*0.735 */
 module_param(vcm, uint, 0);

Signature · 1 line

1.7.9.5