Skip to contentSkip to conversation

drm/i915/dp: add lane_count check in intel_dp_check_link_status

PATCH Applied Matthew Auld 5 participants 6 messages Oct 19, 2016 – Oct 24, 2016

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 drm/i915/dp: add lane_count check in intel_dp_check_link_status

Currently it's entirely possible to go through the link training step without first determining the lane_count, which is silly since we end up doing a bunch of aux transfers of size = 0, as highlighted by WARN_ON(!msg->buffer != !msg->size), and can only ever result in a 'failed to update link training' message. This can be observed during intel_dp_long_pulse where we can do the link training step, but before we have had a chance to set the link params. To avoid this we add an extra check for the lane_count in intel_dp_check_link_status, which should prevent us from doing the link training step prematurely.

v2: add WARN_ON_ONCE and FIXME comment (Ville)

References: https://bugs.freedesktop.org/show_bug.cgi?id=97344

Cc Ville Syrjälä <[email protected]>
Cc Mika Kahola <[email protected]>
---
 drivers/gpu/drm/i915/intel_dp.c | 5 +++++
 1 file changed, 5 insertions(+)
drivers/gpu/drm/i915/intel_dp.c +5 -0
index 88f3b74..fb760ad 100644
@@ -4032,6 +4032,11 @@ intel_dp_check_link_status(struct intel_dp *intel_dp)
 	if (!to_intel_crtc(intel_encoder->base.crtc)->active)
 		return;
 
+	/* FIXME: we need to synchronize this sort of stuff with hardware
+	 * readout */
+	if (WARN_ON_ONCE(!intel_dp->lane_count))
+		return;
+
 	/* if link training is requested we should perform it always */
 	if ((intel_dp->compliance_test_type == DP_TEST_LINK_TRAINING) ||
 	    (!drm_dp_channel_eq_ok(link_status, intel_dp->lane_count))) {
Signature · 6 lines
2.7.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#1 lore raw

✗ Fi.CI.BAT: warning for drm/i915/dp: add lane_count check in intel_dp_check_link_status (rev2)

== Series Details ==

== Series Details ==

Series: drm/i915/dp: add lane_count check in intel_dp_check_link_status (rev2)
URL : https://patchwork.freedesktop.org/series/11667/
State : warning

== Summary ==

Series 11667v2 drm/i915/dp: add lane_count check in intel_dp_check_link_status
https://patchwork.freedesktop.org/api/1.0/series/11667/revisions/2/mbox/

Test drv_module_reload_basic:

                pass       -> DMESG-WARN (fi-skl-6700hq)
Test gem_exec_suspend:
        Subgroup basic-s3:
                dmesg-warn -> PASS       (fi-skl-6700hq)
Test kms_pipe_crc_basic:
        Subgroup nonblocking-crc-pipe-a:
                dmesg-warn -> PASS       (fi-ilk-650)
        Subgroup nonblocking-crc-pipe-b:
                pass       -> DMESG-WARN (fi-ivb-3770)
        Subgroup suspend-read-crc-pipe-a:
                dmesg-warn -> PASS       (fi-skl-6700hq)
                dmesg-warn -> PASS       (fi-ilk-650)
        Subgroup suspend-read-crc-pipe-b:
                dmesg-warn -> PASS       (fi-skl-6700hq)
        Subgroup suspend-read-crc-pipe-c:
                dmesg-warn -> PASS       (fi-skl-6700hq)
fi-bdw-5557u     total:246  pass:231  dwarn:0   dfail:0   fail:0   skip:15 
fi-bsw-n3050     total:246  pass:204  dwarn:0   dfail:0   fail:0   skip:42 
fi-bxt-t5700     total:246  pass:216  dwarn:0   dfail:0   fail:0   skip:30 
fi-byt-j1900     total:246  pass:214  dwarn:0   dfail:0   fail:1   skip:31 
fi-byt-n2820     total:246  pass:210  dwarn:0   dfail:0   fail:1   skip:35 
fi-hsw-4770      total:246  pass:224  dwarn:0   dfail:0   fail:0   skip:22 
fi-hsw-4770r     total:246  pass:224  dwarn:0   dfail:0   fail:0   skip:22 
fi-ilk-650       total:246  pass:184  dwarn:0   dfail:0   fail:2   skip:60 
fi-ivb-3520m     total:246  pass:221  dwarn:0   dfail:0   fail:0   skip:25 
fi-ivb-3770      total:246  pass:220  dwarn:1   dfail:0   fail:0   skip:25 
fi-skl-6260u     total:246  pass:232  dwarn:0   dfail:0   fail:0   skip:14 
fi-skl-6700hq    total:246  pass:222  dwarn:1   dfail:0   fail:0   skip:23 
fi-skl-6700k     total:246  pass:221  dwarn:1   dfail:0   fail:0   skip:24 
fi-skl-6770hq    total:246  pass:232  dwarn:0   dfail:0   fail:0   skip:14 
fi-snb-2520m     total:246  pass:210  dwarn:0   dfail:0   fail:0   skip:36 
fi-snb-2600      total:246  pass:209  dwarn:0   dfail:0   fail:0   skip:37 

Results at /archive/results/CI_IGT_test/Patchwork_2768/

456ed322a41b7ca9699ad10fe49775803a55656a drm-intel-nightly: 2016y-10m-19d-20h-30m-34s UTC integration manifest 95638cb drm/i915/dp: add lane_count check in intel_dp_check_link_status

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#2 lore raw

Re: ✗ Fi.CI.BAT: warning for drm/i915/dp: add lane_count check in intel_dp_check_link_status (rev2)

Quoted 6 lines · Patchwork

== Series Details ==

Series: drm/i915/dp: add lane_count check in intel_dp_check_link_status (rev2)
URL : https://patchwork.freedesktop.org/series/11667/
State : warning

Quoted 7 lines

== Summary ==

Series 11667v2 drm/i915/dp: add lane_count check in intel_dp_check_link_status
https://patchwork.freedesktop.org/api/1.0/series/11667/revisions/2/mbox/

Test drv_module_reload_basic:

                pass       -> DMESG-WARN (fi-skl-6700hq)
[   36.849247] [drm:lspcon_init [i915]] *ERROR* Failed to probe lspcon
[   36.849278] [drm:intel_ddi_init [i915]] *ERROR* LSPCON init failed on port B
[   36.867178] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[   38.946464] Setting dangerous option inject_load_failure - tainting kernel
[   39.093675] Setting dangerous option inject_load_failure - tainting kernel
[   39.258529] Setting dangerous option inject_load_failure - tainting kernel
[   39.424800] Setting dangerous option inject_load_failure - tainting kernel
[   40.497909] [drm:lspcon_init [i915]] *ERROR* Failed to probe lspcon
[   40.498321] [drm:intel_ddi_init [i915]] *ERROR* LSPCON init failed on port B
[   40.530092] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS

Created bug report https://bugs.freedesktop.org/show_bug.cgi?id=98353

Quoted 8 lines

Test gem_exec_suspend:

        Subgroup basic-s3:
                dmesg-warn -> PASS       (fi-skl-6700hq)
Test kms_pipe_crc_basic:
        Subgroup nonblocking-crc-pipe-a:
                dmesg-warn -> PASS       (fi-ilk-650)
        Subgroup nonblocking-crc-pipe-b:
                pass       -> DMESG-WARN (fi-ivb-3770)
[  391.061781] [drm:drm_edid_block_valid] *ERROR* EDID checksum is
invalid, remainder is 130
[  391.062331] [drm:drm_edid_block_valid] *ERROR* EDID checksum is

invalid, remainder is 130

https://bugs.freedesktop.org/show_bug.cgi?id=98228
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#3 lore raw

Re: ✗ Fi.CI.BAT: warning for drm/i915/dp: add lane_count check in intel_dp_check_link_status (rev2)

Quoted 35 lines · Matthew Auld
Quoted 6 lines · Patchwork

== Series Details ==

Series: drm/i915/dp: add lane_count check in intel_dp_check_link_status (rev2)
URL : https://patchwork.freedesktop.org/series/11667/
State : warning

Quoted 7 lines

== Summary ==

Series 11667v2 drm/i915/dp: add lane_count check in intel_dp_check_link_status
https://patchwork.freedesktop.org/api/1.0/series/11667/revisions/2/mbox/

Test drv_module_reload_basic:

                pass       -> DMESG-WARN (fi-skl-6700hq)
[   36.849247] [drm:lspcon_init [i915]] *ERROR* Failed to probe lspcon
[   36.849278] [drm:intel_ddi_init [i915]] *ERROR* LSPCON init failed on port B
[   36.867178] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[   38.946464] Setting dangerous option inject_load_failure - tainting kernel
[   39.093675] Setting dangerous option inject_load_failure - tainting kernel
[   39.258529] Setting dangerous option inject_load_failure - tainting kernel
[   39.424800] Setting dangerous option inject_load_failure - tainting kernel
[   40.497909] [drm:lspcon_init [i915]] *ERROR* Failed to probe lspcon
[   40.498321] [drm:intel_ddi_init [i915]] *ERROR* LSPCON init failed on port B
[   40.530092] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS

Created bug report https://bugs.freedesktop.org/show_bug.cgi?id=98353

Quoted 8 lines

Test gem_exec_suspend:

        Subgroup basic-s3:
                dmesg-warn -> PASS       (fi-skl-6700hq)
Test kms_pipe_crc_basic:
        Subgroup nonblocking-crc-pipe-a:
                dmesg-warn -> PASS       (fi-ilk-650)
        Subgroup nonblocking-crc-pipe-b:
                pass       -> DMESG-WARN (fi-ivb-3770)
Quoted 6 lines
[  391.061781] [drm:drm_edid_block_valid] *ERROR* EDID checksum is
invalid, remainder is 130
[  391.062331] [drm:drm_edid_block_valid] *ERROR* EDID checksum is

invalid, remainder is 130

https://bugs.freedesktop.org/show_bug.cgi?id=98228

Pushed to dinq. Thanks for the patch.

Signature · 6 lines
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Reviewed-by on v1 1/1
#4 lore raw
In reply to Matthew Auld
Quoted 25 lines · Matthew Auld

Currently it's entirely possible to go through the link training step without first determining the lane_count, which is silly since we end up doing a bunch of aux transfers of size = 0, as highlighted by WARN_ON(!msg->buffer != !msg->size), and can only ever result in a 'failed to update link training' message. This can be observed during intel_dp_long_pulse where we can do the link training step, but before we have had a chance to set the link params. To avoid this we add an extra check for the lane_count in intel_dp_check_link_status, which should prevent us from doing the link training step prematurely.

v2: add WARN_ON_ONCE and FIXME comment (Ville)

References: https://bugs.freedesktop.org/show_bug.cgi?id=97344

Cc Ville Syrjälä <[email protected]>
Cc Mika Kahola <[email protected]>
---
 drivers/gpu/drm/i915/intel_dp.c | 5 +++++
 1 file changed, 5 insertions(+)
drivers/gpu/drm/i915/intel_dp.c +0 -0
index 88f3b74..fb760ad 100644

drivers/gpu/drm/i915/intel_dp.c intel_dp_check_link_status(struct intel_dp *intel_dp) · line 4038

Quoted 7 lines
drivers/gpu/drm/i915/intel_dp.c +4 -0
@@ -4032,6 +4032,11 @@ intel_dp_check_link_status(struct intel_dp *intel_dp)
 	if (!to_intel_crtc(intel_encoder->base.crtc)->active)
 		return;
 
+	/* FIXME: we need to synchronize this sort of stuff with hardware
+	 * readout */
+	if (WARN_ON_ONCE(!intel_dp->lane_count))
+		return;

One warn is better than a constant spew as can be seen eg. in
https://bugs.freedesktop.org/show_bug.cgi?id=98323

Still need to fix the real issue of course, but in the meantime

Quoted 6 lines
drivers/gpu/drm/i915/intel_dp.c +1 -0
+
 	/* if link training is requested we should perform it always */
 	if ((intel_dp->compliance_test_type == DP_TEST_LINK_TRAINING) ||
 	    (!drm_dp_channel_eq_ok(link_status, intel_dp->lane_count))) {
Signature · 1 line
2.7.4
Signature · 6 lines
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
maintainer
#5 lore raw
In reply to Matthew Auld
Quoted 9 lines · Matthew Auld

Currently it's entirely possible to go through the link training step without first determining the lane_count, which is silly since we end up doing a bunch of aux transfers of size = 0, as highlighted by WARN_ON(!msg->buffer != !msg->size), and can only ever result in a 'failed to update link training' message. This can be observed during intel_dp_long_pulse where we can do the link training step, but before we have had a chance to set the link params. To avoid this we add an extra check for the lane_count in intel_dp_check_link_status, which should prevent us from doing the link training step prematurely.

Now we'll just have to fix the cases where we try to do this anyway:

https://bugs.freedesktop.org/show_bug.cgi?id=98374

BR,
Jani.

Quoted 27 lines

v2: add WARN_ON_ONCE and FIXME comment (Ville)

References: https://bugs.freedesktop.org/show_bug.cgi?id=97344

Cc Ville Syrjälä <[email protected]>
Cc Mika Kahola <[email protected]>
---
 drivers/gpu/drm/i915/intel_dp.c | 5 +++++
 1 file changed, 5 insertions(+)
drivers/gpu/drm/i915/intel_dp.c +5 -0
index 88f3b74..fb760ad 100644
@@ -4032,6 +4032,11 @@ intel_dp_check_link_status(struct intel_dp *intel_dp)
 	if (!to_intel_crtc(intel_encoder->base.crtc)->active)
 		return;
 
+	/* FIXME: we need to synchronize this sort of stuff with hardware
+	 * readout */
+	if (WARN_ON_ONCE(!intel_dp->lane_count))
+		return;
+
 	/* if link training is requested we should perform it always */
 	if ((intel_dp->compliance_test_type == DP_TEST_LINK_TRAINING) ||
 	    (!drm_dp_channel_eq_ok(link_status, intel_dp->lane_count))) {
Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx