usb: xhci: clean up error_bitmask usage
Subsystems (2)
PATCH v2 1/1 usb: xhci: clean up error_bitmask usage
In xhci_handle_event(), when errors are detected, driver always sets a bit in error_bitmask (one member of the xhci private driver data). That means users have to retrieve and decode the value of error_bitmask in xhci private driver data if they want to know whether those erros ever happened in xhci_handle_event(). Otherwise, those errors are just ignored silently.
This patch cleans up this by replacing the setting of error_bitmask with the kernel print functions, so that users can easily check and report the errors happened in xhci_handle_event().
---
Changelog:
V2:
- Remove "return" for failed port status event;
- Refine checking return value of handle_tx_event();
- Print the right TRB type value in debug message.
drivers/usb/host/xhci-ring.c | 46 +++++++++++++++++++++----------------------- drivers/usb/host/xhci.h | 2 -- 2 files changed, 22 insertions(+), 26 deletions(-)
drivers/usb/host/xhci-ring.c +22 -24
@@ -1183,7 +1183,7 @@ static void xhci_handle_cmd_nec_get_fw(struct xhci_hcd *xhci, struct xhci_event_cmd *event) {if (!(xhci->quirks &XHCI_NEC_HOST )) { - xhci->error_bitmask |=1 <<6 ; +xhci_warn (xhci,"WARN NEC_GET_FW command on non-NEC host\n" );return ; } xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
@@ -1325,14 +1325,13 @@ static void handle_cmd_completion(struct xhci_hcd *xhci, cmd_trb = xhci->cmd_ring->dequeue; cmd_dequeue_dma =xhci_trb_virt_to_dma (xhci->cmd_ring->deq_seg, cmd_trb); -/* Is the command ring deq ptr out of sync with the deq seg ptr? */ -if (cmd_dequeue_dma ==0 ) { - xhci->error_bitmask |=1 <<4 ; -return ; - } -/* Does the DMA address match our internal dequeue pointer address? */ -if (cmd_dma != (u64 ) cmd_dequeue_dma) { - xhci->error_bitmask |=1 <<5 ; +/* +* Check whether the completion event is for our internal kept +* command. +*/ +if (!cmd_dequeue_dma || cmd_dma != (u64 )cmd_dequeue_dma) { +xhci_warn (xhci, +"ERROR mismatched command completion event\n" );return ; }
@@ -1418,7 +1417,7 @@ static void handle_cmd_completion(struct xhci_hcd *xhci,break ;default :/* Skip over unknown commands on the event ring */ - xhci->error_bitmask |=1 <<6 ; +xhci_info (xhci,"INFO unknown command type %d\n" , cmd_type);break ; }
@@ -1519,10 +1518,10 @@ static void handle_port_status(struct xhci_hcd *xhci,bool bogus_port_status = false;/* Port status change events always have a successful completion code */ -if (GET_COMP_CODE (le32_to_cpu (event->generic.field[2 ])) !=COMP_SUCCESS ) { -xhci_warn (xhci,"WARN: xHC returned failed port status event\n" ); - xhci->error_bitmask |=1 <<8 ; - } +if (GET_COMP_CODE (le32_to_cpu (event->generic.field[2 ])) !=COMP_SUCCESS ) +xhci_warn (xhci, +"WARN: xHC returned failed port status event\n" ); + port_id =GET_PORT_ID (le32_to_cpu (event->generic.field[0 ]));xhci_dbg (xhci,"Port Status Change Event for port %d\n" , port_id);
@@ -2644,18 +2643,17 @@ static int xhci_handle_event(struct xhci_hcd *xhci)int update_ptrs =1 ;int ret; +/* Event ring hasn't been allocated yet. */ if (!xhci->event_ring || !xhci->event_ring->dequeue) { - xhci->error_bitmask |=1 <<1 ; -return 0 ; +xhci_err (xhci,"ERROR event ring not ready\n" ); +return -ENOMEM ; } event = xhci->event_ring->dequeue;/* Does the HC or OS own the TRB? */ if ((le32_to_cpu (event->event_cmd.flags) &TRB_CYCLE ) != - xhci->event_ring->cycle_state) { - xhci->error_bitmask |=1 <<2 ; + xhci->event_ring->cycle_state)return 0 ; - }/* * Barrier between reading the TRB_CYCLE (valid) flag above and any
@@ -2663,7 +2661,7 @@ static int xhci_handle_event(struct xhci_hcd *xhci)*/ rmb ();/* FIXME: Handle more event types. */ -switch ((le32_to_cpu (event->event_cmd.flags) &TRB_TYPE_BITMASK )) { +switch (le32_to_cpu (event->event_cmd.flags) &TRB_TYPE_BITMASK ) {case TRB_TYPE (TRB_COMPLETION ):handle_cmd_completion (xhci, &event->event_cmd);break ;
@@ -2673,9 +2671,7 @@ static int xhci_handle_event(struct xhci_hcd *xhci)break ;case TRB_TYPE (TRB_TRANSFER ): ret =handle_tx_event (xhci, &event->trans_event); -if (ret <0 ) - xhci->error_bitmask |=1 <<9 ; -else +if (ret >=0 ) update_ptrs =0 ;break ;case TRB_TYPE (TRB_DEV_NOTE ):
@@ -2686,7 +2682,9 @@ static int xhci_handle_event(struct xhci_hcd *xhci) TRB_TYPE(48))handle_vendor_event (xhci, event); else - xhci->error_bitmask |= 1 << 3; + xhci_warn(xhci, "ERROR unknown event type %d\n", +TRB_FIELD_TO_TYPE ( + le32_to_cpu(event->event_cmd.flags))); }/* Any of the above functions may drop and re-acquire the lock, so check * to make sure a watchdog timer didn't mark the host as non-responsive.
drivers/usb/host/xhci.h +0 -2
@@ -1616,8 +1616,6 @@ struct xhci_hcd {#define XHCI_STATE_DYING (1 << 0)#define XHCI_STATE_HALTED (1 << 1)#define XHCI_STATE_REMOVING (1 << 2) -/* Statistics */ -int error_bitmask;unsigned int quirks;#define XHCI_LINK_TRB_QUIRK (1 << 0)#define XHCI_RESET_EP_QUIRK (1 << 1)
Signature · 1 line
2.1.4
Quoted 11 lines · Lu Baolu
In
xhci_handle_event(), when errors are detected, driver always sets a bit inerror_bitmask(one member of the xhci private driver data). That means users have to retrieve and decode the value oferror_bitmaskin xhci private driver data if they want to know whether those erros ever happened inxhci_handle_event(). Otherwise, those errors are just ignored silently.This patch cleans up this by replacing the setting of
error_bitmaskwith the kernel print functions, so that users can easily check and report the errors happened inxhci_handle_event().
Quoted 8 lines
Signed-off-by Lu Baolu <[email protected]>---
Changelog:
V2:
- Remove "return" for failed port status event;
- Refine checking return value ofhandle_tx_event();
- Print the right TRB type value in debug message.
Thanks, added
-Mathias