regulator: arizona-ldo1: Set appropriate value for ramp_delay

---
 drivers/regulator/arizona-ldo1.c | 2 ++
 1 file changed, 2 insertions(+)

index f7c88ff..302b57c 100644
@@ -130,6 +130,7 @@ static const struct regulator_desc arizona_ldo1_hc = {
 	.uV_step = 50000,
 	.n_voltages = 8,
 	.enable_time = 1500,
+	.ramp_delay = 24000,
 
 	.owner = THIS_MODULE,
 };

@@ -153,6 +154,7 @@ static const struct regulator_desc arizona_ldo1 = {
 	.uV_step = 25000,
 	.n_voltages = 13,
 	.enable_time = 500,
+	.ramp_delay = 24000,
 
 	.owner = THIS_MODULE,
 };

2.1.4

The patch

regulator: arizona-ldo1: Set appropriate value for ramp_delay

has been applied to the regulator tree at

git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark

From: Charles Keepax <[email protected]>
Date: Fri, 21 Oct 2016 14:47:42 +0100
Subject: [PATCH] regulator: arizona-ldo1: Set appropriate value for ramp_delay

---
 drivers/regulator/arizona-ldo1.c | 2 ++
 1 file changed, 2 insertions(+)

index f7c88ff90c43..302b57cb89c6 100644
@@ -130,6 +130,7 @@ static const struct regulator_desc arizona_ldo1_hc = {
 	.uV_step = 50000,
 	.n_voltages = 8,
 	.enable_time = 1500,
+	.ramp_delay = 24000,
 
 	.owner = THIS_MODULE,
 };

@@ -153,6 +154,7 @@ static const struct regulator_desc arizona_ldo1 = {
 	.uV_step = 25000,
 	.n_voltages = 13,
 	.enable_time = 500,
+	.ramp_delay = 24000,
 
 	.owner = THIS_MODULE,
 };

2.8.1