Patch "[media] cx231xx: fix GPIOs for Pixelview SBTVD hybrid" has been added to the 4.8-stable tree

This is a note to let you know that I've just added the patch titled

[media] cx231xx: fix GPIOs for Pixelview SBTVD hybrid

to the 4.8-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
cx231xx-fix-gpios-for-pixelview-sbtvd-hybrid.patch
and it can be found in the queue-4.8 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

From: Mauro Carvalho Chehab <[email protected]>
Date: Sun, 4 Sep 2016 10:06:39 -0300
Subject: [media] cx231xx: fix GPIOs for Pixelview SBTVD hybrid

From: Mauro Carvalho Chehab <[email protected]>

commit 24b923f073ac37eb744f56a2c7f77107b8219ab2 upstream.

This device uses GPIOs: 28 to switch between analog and digital modes: on digital mode, it should be set to 1.

The code that sets it on analog mode is OK, but it misses the logic that sets it on digital mode.

---
 drivers/media/usb/cx231xx/cx231xx-cards.c |    2 +-
 drivers/media/usb/cx231xx/cx231xx-core.c  |    3 ++-
 2 files changed, 3 insertions(+), 2 deletions(-)

@@ -486,7 +486,7 @@ struct cx231xx_board cx231xx_boards[] =
 		.output_mode = OUT_MODE_VIP11,
 		.demod_xfer_mode = 0,
 		.ctl_pin_status_mask = 0xFFFFFFC4,
-		.agc_analog_digital_select_gpio = 0x00,	/* According with PV cxPolaris.inf file */
+		.agc_analog_digital_select_gpio = 0x1c,
 		.tuner_sif_gpio = -1,
 		.tuner_scl_gpio = -1,
 		.tuner_sda_gpio = -1,

@@ -712,6 +712,7 @@ int cx231xx_set_mode(struct cx231xx *dev
 			break;
 		case CX231XX_BOARD_CNXT_RDE_253S:
 		case CX231XX_BOARD_CNXT_RDU_253S:
+		case CX231XX_BOARD_PV_PLAYTV_USB_HYBRID:
 			errCode = cx231xx_set_agc_analog_digital_mux_select(dev, 1);
 			break;
 		case CX231XX_BOARD_HAUPPAUGE_EXETER:

@@ -738,7 +739,7 @@ int cx231xx_set_mode(struct cx231xx *dev
 		case CX231XX_BOARD_PV_PLAYTV_USB_HYBRID:
 		case CX231XX_BOARD_HAUPPAUGE_USB2_FM_PAL:
 		case CX231XX_BOARD_HAUPPAUGE_USB2_FM_NTSC:
-		errCode = cx231xx_set_agc_analog_digital_mux_select(dev, 0);
+			errCode = cx231xx_set_agc_analog_digital_mux_select(dev, 0);
 			break;
 		default:
 			break;

Patches currently in stable-queue which might be from [email protected] are

queue-4.8/cx231xx-don-t-return-error-on-success.patch queue-4.8/mb86a20s-fix-demod-settings.patch queue-4.8/cx231xx-fix-gpios-for-pixelview-sbtvd-hybrid.patch queue-4.8/mb86a20s-fix-the-locking-logic.patch