Skip to contentSkip to conversation

Patch "target: Don't override EXTENDED_COPY xcopy_pt_cmd SCSI status code" has been added to the 4.4-stable tree

PATCH [email protected] 1 participant 1 message Oct 26, 2016

Subsystems (2)
lore
Share & tools
lore

[email protected]

author maintainer Applied
#0 lore raw

This is a note to let you know that I've just added the patch titled

target: Don't override EXTENDED_COPY xcopy_pt_cmd SCSI status code

to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
target-don-t-override-extended_copy-xcopy_pt_cmd-scsi-status-code.patch
and it can be found in the queue-4.4 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

Quoted 1 line

From 926317de33998c112c5510301868ea9aa34097e2 Mon Sep 17 00:00:00 2001

From: Dinesh Israni <[email protected]>
Date: Mon, 10 Oct 2016 20:22:03 -0700
Subject: target: Don't override EXTENDED_COPY xcopy_pt_cmd SCSI status code

From: Dinesh Israni <[email protected]>

commit 926317de33998c112c5510301868ea9aa34097e2 upstream.

This patch addresses a bug where a local EXTENDED_COPY WRITE or READ backend I/O request would always return SAM_STAT_CHECK_CONDITION, even if underlying xcopy_pt_cmd->se_cmd generated a different SCSI status code.

ESX host environments expect to hit SAM_STAT_RESERVATION_CONFLICT for certain scenarios, and SAM_STAT_CHECK_CONDITION results in non-retriable status for these cases.

Tested on v4.1.y with ESX v5.5u2+ with local IBLOCK backend copy.

---
 drivers/target/target_core_xcopy.c |   16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)
drivers/target/target_core_xcopy.c +12 -4
@@ -662,6 +662,7 @@ static int target_xcopy_read_source(
 	rc = target_xcopy_setup_pt_cmd(xpt_cmd, xop, src_dev, &cdb[0],
 				remote_port, true);
 	if (rc < 0) {
+		ec_cmd->scsi_status = xpt_cmd->se_cmd.scsi_status;
 		transport_generic_free_cmd(se_cmd, 0);
 		return rc;
 	}
@@ -673,6 +674,7 @@ static int target_xcopy_read_source(
 
 	rc = target_xcopy_issue_pt_cmd(xpt_cmd);
 	if (rc < 0) {
+		ec_cmd->scsi_status = xpt_cmd->se_cmd.scsi_status;
 		transport_generic_free_cmd(se_cmd, 0);
 		return rc;
 	}
@@ -723,6 +725,7 @@ static int target_xcopy_write_destinatio
 				remote_port, false);
 	if (rc < 0) {
 		struct se_cmd *src_cmd = &xop->src_pt_cmd->se_cmd;
+		ec_cmd->scsi_status = xpt_cmd->se_cmd.scsi_status;
 		/*
 		 * If the failure happened before the t_mem_list hand-off in
 		 * target_xcopy_setup_pt_cmd(), Reset memory + clear flag so that
@@ -738,6 +741,7 @@ static int target_xcopy_write_destinatio
 
 	rc = target_xcopy_issue_pt_cmd(xpt_cmd);
 	if (rc < 0) {
+		ec_cmd->scsi_status = xpt_cmd->se_cmd.scsi_status;
 		se_cmd->se_cmd_flags &= ~SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC;
 		transport_generic_free_cmd(se_cmd, 0);
 		return rc;
@@ -824,10 +828,14 @@ static void target_xcopy_do_work(struct
 out:
 	xcopy_pt_undepend_remotedev(xop);
 	kfree(xop);
-
-	pr_warn_ratelimited("target_xcopy_do_work: rc: %d, Setting X-COPY CHECK_CONDITION"
-			    " -> sending response\n", rc);
-	ec_cmd->scsi_status = SAM_STAT_CHECK_CONDITION;
+	/*
+	 * Don't override an error scsi status if it has already been set
+	 */
+	if (ec_cmd->scsi_status == SAM_STAT_GOOD) {
+		pr_warn_ratelimited("target_xcopy_do_work: rc: %d, Setting X-COPY"
+			" CHECK_CONDITION -> sending response\n", rc);
+		ec_cmd->scsi_status = SAM_STAT_CHECK_CONDITION;
+	}
 	target_complete_cmd(ec_cmd, SAM_STAT_CHECK_CONDITION);
 }
 

Patches currently in stable-queue which might be from [email protected] are

queue-4.4/target-don-t-override-extended_copy-xcopy_pt_cmd-scsi-status-code.patch queue-4.4/target-make-extended_copy-0xe4-failure-return-copy-target-device-not-reachable.patch