iio: adc: spmi-vadc: Changes to support different scaling
Subsystems (3)
v2 cover iio: adc: spmi-vadc: Changes to support different scaling
VADC is a 15 bit ADC that measures signals through the Main analog multiplexer (AMUX). The driver arbitrates the request to issue ADC read requests. These patches adds different scaling functionality to convert adc code to physical units.
[V1]
https://lkml.org/lkml/2016/10/25/26
Rama Krishna Phani A (2):
iio: adc: spmi-vadc: Update changes to support reporting of Raw adc
code.
iio: adc: spmi-vadc: Changes to support different scaling
.../devicetree/bindings/iio/adc/qcom,spmi-vadc.txt | 14 + drivers/iio/adc/qcom-spmi-vadc.c | 311 ++++++++++++++++----- 2 files changed, 261 insertions(+), 64 deletions(-)
Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
A message that is not in the archive (sent off-list or not yet received): 1477486851-24700-1-git-send-email-rphani-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org
PATCH v2 2/2 iio: adc: spmi-vadc: Changes to support different scaling
Add changes to support different scale functions to convert adc code to physical units.
--- .../devicetree/bindings/iio/adc/qcom,spmi-vadc.txt | 14 ++ drivers/iio/adc/qcom-spmi-vadc.c | 263 +++++++++++++++++---- 2 files changed, 236 insertions(+), 41 deletions(-)
Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt +14 -0
@@ -37,6 +37,12 @@ VADC node: Value type: <prop-encoded-array> Definition: End of conversion interrupt. +- qcom,vadc-poll-eoc: + Usage: optional + Value type: <bool> + Definition: Use polling instead of interrupts for End of Conversion + completion. + Channel node properties: - reg:
@@ -92,6 +98,14 @@ Channel node properties: Valid values are: 1, 2, 4, 8, 16, 32, 64, 128, 256, 512 If property is not found, 1 sample will be used. +- qcom,scale-function: + Usage: optional + Value type: <u32> + Definition: Scaling function used to convert raw ADC code to + units specific to a given channel. Scaled units can be + microvolts, millidegC.Valid values are: 0, 1, 2, 3, 4. + If property is not found, 0 scaling will be used. + NOTE: Following channels, also known as reference point channels, are used for
drivers/iio/adc/qcom-spmi-vadc.c +222 -41
353 lines not on this page · raw message
Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
PATCH v2 1/2 iio: adc: spmi-vadc: Update changes to support reporting of Raw adc code.
In reply to Rama Krishna Phani AUpdate changes to support reporting of Raw adc code.
--- drivers/iio/adc/qcom-spmi-vadc.c | 54 +++++++++++++++++++++------------------- 1 file changed, 28 insertions(+), 26 deletions(-)
drivers/iio/adc/qcom-spmi-vadc.c +28 -26
@@ -1,5 +1,5 @@/* -* Copyright (c) 2012-2014, The Linux Foundation. All rights reserved. +* Copyright (c) 2012-2016, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and
@@ -84,7 +84,7 @@#define VADC_MAX_ADC_CODE 0xa800#define VADC_ABSOLUTE_RANGE_UV 625000 -#define VADC_RATIOMETRIC_RANGE_UV 1800000 +#define VADC_RATIOMETRIC_RANGE 1800#define VADC_DEF_PRESCALING 0/* 1:1 */ #define VADC_DEF_DECIMATION 0/* 512 */
@@ -418,7 +418,7 @@ static int vadc_measure_ref_points(struct vadc_priv *vadc)u16 read_1, read_2;int ret; - vadc->graph[VADC_CALIB_RATIOMETRIC ].dx =VADC_RATIOMETRIC_RANGE_UV ; + vadc->graph[VADC_CALIB_RATIOMETRIC ].dx =VADC_RATIOMETRIC_RANGE ; vadc->graph[VADC_CALIB_ABSOLUTE ].dx =VADC_ABSOLUTE_RANGE_UV ; prop =vadc_get_channel (vadc,VADC_REF_1250MV );
@@ -468,21 +468,30 @@ static int vadc_measure_ref_points(struct vadc_priv *vadc)return ret; } -static s32 vadc_calibrate (struct vadc_priv *vadc, -const struct vadc_channel_prop *prop,u16 adc_code) +static void vadc_scale_calib (struct vadc_priv *vadc,u16 adc_code, +const struct vadc_channel_prop *prop, +s64 *scale_voltage) { -const struct vadc_prescale_ratio *prescale; -s64 voltage; + *scale_voltage = (adc_code - + vadc->graph[prop->calibration].gnd); + *scale_voltage *= vadc->graph[prop->calibration].dx; + *scale_voltage =div64_s64 (*scale_voltage, + vadc->graph[prop->calibration].dy); +if (prop->calibration ==VADC_CALIB_ABSOLUTE ) + *scale_voltage += + vadc->graph[prop->calibration].dx; - voltage = adc_code - vadc->graph[prop->calibration].gnd; - voltage *= vadc->graph[prop->calibration].dx; - voltage =div64_s64 (voltage, vadc->graph[prop->calibration].dy); +if (*scale_voltage <0 ) + *scale_voltage =0 ; +} -if (prop->calibration ==VADC_CALIB_ABSOLUTE ) - voltage += vadc->graph[prop->calibration].dx; +static s64 vadc_scale_fn (struct vadc_priv *vadc, +const struct vadc_channel_prop *prop,u16 adc_code) +{ +const struct vadc_prescale_ratio *prescale; +s64 voltage =0 ; -if (voltage <0 ) - voltage =0 ; +vadc_scale_calib (vadc, adc_code, prop, &voltage); prescale = &vadc_prescale_ratios[prop->prescale];
@@ -552,11 +561,8 @@ static int vadc_read_raw(struct iio_dev *indio_dev,if (ret)break ; - *val =vadc_calibrate (vadc, prop, adc_code); + *val =vadc_scale_fn (vadc, prop, adc_code); -/* 2mV/K, return milli Celsius */ - *val /=2 ; - *val -=KELVINMIL_CELSIUSMIL ;return IIO_VAL_INT ;case IIO_CHAN_INFO_RAW : prop = &vadc->chan_props[chan->address];
@@ -564,12 +570,8 @@ static int vadc_read_raw(struct iio_dev *indio_dev,if (ret)break ; - *val =vadc_calibrate (vadc, prop, adc_code); + *val = (int )adc_code;return IIO_VAL_INT ; -case IIO_CHAN_INFO_SCALE : - *val =0 ; - *val2 =1000 ; -return IIO_VAL_INT_PLUS_MICRO ;default : ret = -EINVAL ;break ;
@@ -616,8 +618,8 @@ struct vadc_channels { VADC_CHAN(_dname, IIO_TEMP, BIT(IIO_CHAN_INFO_PROCESSED), _pre) \#define VADC_CHAN_VOLT (_dname, _pre) \ - VADC_CHAN(_dname, IIO_VOLTAGE, \ - BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), \ + VADC_CHAN(_dname, IIO_VOLTAGE, \ + BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_PROCESSED),\ _pre) \/*
@@ -850,9 +852,9 @@ static int vadc_get_dt_data(struct vadc_priv *vadc, struct device_node *node) iio_chan->channel = prop.channel; iio_chan->datasheet_name = vadc_chan->datasheet_name; + iio_chan->extend_name = child->name; iio_chan->info_mask_separate = vadc_chan->info_mask; iio_chan->type = vadc_chan->type; - iio_chan->indexed =1 ; iio_chan->address = index++; iio_chan++;
Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project