Skip to contentSkip to conversation

drm: Print some debug/error info during DP dual mode detect

PATCH Superseded Imre Deak 4 participants 7 messages Oct 26, 2016

Subsystems (2)
lore
Share & tools
lore

Imre Deak

author
#0 lore raw

PATCH 1/1 drm: Print some debug/error info during DP dual mode detect

There's at least one LSPCON device that occasionally returns an unexpected adaptor ID which leads to a failed detect. Print some debug info to help debugging this and future cases. Also print an error for an unexpected adaptor ID, so users can report it.

---
 drivers/gpu/drm/drm_dp_dual_mode_helper.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)
drivers/gpu/drm/drm_dp_dual_mode_helper.c +13 -0
index 488355b..a0e603b 100644
@@ -142,6 +142,11 @@ static bool is_hdmi_adaptor(const char hdmi_id[DP_DUAL_MODE_HDMI_ID_LEN])
 		      sizeof(dp_dual_mode_hdmi_id)) == 0;
 }
 
+static bool is_type1_adaptor(uint8_t adaptor_id)
+{
+	return adaptor_id == 0 || adaptor_id == 0xff;
+}
+
 static bool is_type2_adaptor(uint8_t adaptor_id)
 {
 	return adaptor_id == (DP_DUAL_MODE_TYPE_TYPE2 |
@@ -193,6 +198,8 @@ enum drm_dp_dual_mode_type drm_dp_dual_mode_detect(struct i2c_adapter *adapter)
 	 */
 	ret = drm_dp_dual_mode_read(adapter, DP_DUAL_MODE_HDMI_ID,
 				    hdmi_id, sizeof(hdmi_id));
+	DRM_DEBUG_KMS("DP dual mode HDMI ID: %*pE (err %zd)\n",
+		      ret ? 0 : (int)sizeof(hdmi_id), hdmi_id, ret);
 	if (ret)
 		return DRM_DP_DUAL_MODE_UNKNOWN;
 
@@ -210,6 +217,8 @@ enum drm_dp_dual_mode_type drm_dp_dual_mode_detect(struct i2c_adapter *adapter)
 	 */
 	ret = drm_dp_dual_mode_read(adapter, DP_DUAL_MODE_ADAPTOR_ID,
 				    &adaptor_id, sizeof(adaptor_id));
+	DRM_DEBUG_KMS("DP dual mode adaptor ID: %02x (err %zd)\n",
+		      adaptor_id, ret);
 	if (ret == 0) {
 		if (is_lspcon_adaptor(hdmi_id, adaptor_id))
 			return DRM_DP_DUAL_MODE_LSPCON;
@@ -219,6 +228,10 @@ enum drm_dp_dual_mode_type drm_dp_dual_mode_detect(struct i2c_adapter *adapter)
 			else
 				return DRM_DP_DUAL_MODE_TYPE2_DVI;
 		}
+		if (!is_type1_adaptor(adaptor_id) && adaptor_id != hdmi_id[0])
+			DRM_ERROR("Unexpected DP dual mode adapter ID %02x\n",
+				  adaptor_id);
+
 	}
 
 	if (is_hdmi_adaptor(hdmi_id))
Signature · 6 lines
2.5.0

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Reviewed-by on v1 1/1
#1 lore raw
Quoted 29 lines · Imre Deak

There's at least one LSPCON device that occasionally returns an unexpected adaptor ID which leads to a failed detect. Print some debug info to help debugging this and future cases. Also print an error for an unexpected adaptor ID, so users can report it.

---
 drivers/gpu/drm/drm_dp_dual_mode_helper.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)
drivers/gpu/drm/drm_dp_dual_mode_helper.c +5 -0
index 488355b..a0e603b 100644
@@ -142,6 +142,11 @@ static bool is_hdmi_adaptor(const char hdmi_id[DP_DUAL_MODE_HDMI_ID_LEN])
 		      sizeof(dp_dual_mode_hdmi_id)) == 0;
 }
 
+static bool is_type1_adaptor(uint8_t adaptor_id)
+{
+	return adaptor_id == 0 || adaptor_id == 0xff;
+}
+
 static bool is_type2_adaptor(uint8_t adaptor_id)
 {
 	return adaptor_id == (DP_DUAL_MODE_TYPE_TYPE2 |

drivers/gpu/drm/drm_dp_dual_mode_helper.c enum drm_dp_dual_mode_type drm_dp_dual_mode_detect(struct i2c_adapter *adapter) · line 202

Quoted 5 lines
drivers/gpu/drm/drm_dp_dual_mode_helper.c +2 -0
@@ -193,6 +198,8 @@ enum drm_dp_dual_mode_type drm_dp_dual_mode_detect(struct i2c_adapter *adapter)
 	 */
 	ret = drm_dp_dual_mode_read(adapter, DP_DUAL_MODE_HDMI_ID,
 				    hdmi_id, sizeof(hdmi_id));
+	DRM_DEBUG_KMS("DP dual mode HDMI ID: %*pE (err %zd)\n",
+		      ret ? 0 : (int)sizeof(hdmi_id), hdmi_id, ret);

What does that %*pE print with size==0, nothing?

Quoted 13 lines
drivers/gpu/drm/drm_dp_dual_mode_helper.c +2 -0
 	if (ret)
 		return DRM_DP_DUAL_MODE_UNKNOWN;
 
@@ -210,6 +217,8 @@ enum drm_dp_dual_mode_type drm_dp_dual_mode_detect(struct i2c_adapter *adapter)
 	 */
 	ret = drm_dp_dual_mode_read(adapter, DP_DUAL_MODE_ADAPTOR_ID,
 				    &adaptor_id, sizeof(adaptor_id));
+	DRM_DEBUG_KMS("DP dual mode adaptor ID: %02x (err %zd)\n",
+		      adaptor_id, ret);
 	if (ret == 0) {
 		if (is_lspcon_adaptor(hdmi_id, adaptor_id))
 			return DRM_DP_DUAL_MODE_LSPCON;

drivers/gpu/drm/drm_dp_dual_mode_helper.c enum drm_dp_dual_mode_type drm_dp_dual_mode_detect(struct i2c_adapter *adapter) · line 231

Quoted 4 lines
drivers/gpu/drm/drm_dp_dual_mode_helper.c +1 -0
@@ -219,6 +228,10 @@ enum drm_dp_dual_mode_type drm_dp_dual_mode_detect(struct i2c_adapter *adapter)
 			else
 				return DRM_DP_DUAL_MODE_TYPE2_DVI;
 		}
+		if (!is_type1_adaptor(adaptor_id) && adaptor_id != hdmi_id[0])
                                                     ^^^^^^^^^^^^^^^^^^^^^^^^

I take it that was to account for the broken adaptors that ignore the offset?

drivers/gpu/drm/drm_dp_dual_mode_helper.c enum drm_dp_dual_mode_type drm_dp_dual_mode_detect(struct i2c_adapter *adapter) · line 233

Quoted 2 lines
drivers/gpu/drm/drm_dp_dual_mode_helper.c +2 -0
+			DRM_ERROR("Unexpected DP dual mode adapter ID %02x\n",
+				  adaptor_id);

s/adapter/adaptor/ since that's what the spec called it, and I continued down the same path to not confuse it the the i2c adapter.

With that

Quoted 6 lines
drivers/gpu/drm/drm_dp_dual_mode_helper.c +1 -0
+
 	}
 
 	if (is_hdmi_adaptor(hdmi_id))
Signature · 1 line
2.5.0
Signature · 6 lines
Ville Syrjälä
Intel OTC
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author
#2 lore raw
Quoted 29 lines · Ville Syrjälä
Quoted 28 lines · Imre Deak

There's at least one LSPCON device that occasionally returns an unexpected adaptor ID which leads to a failed detect. Print some debug info to help debugging this and future cases. Also print an error for an unexpected adaptor ID, so users can report it.

---
 drivers/gpu/drm/drm_dp_dual_mode_helper.c | 13 +++++++++++++

 1 file changed, 13 insertions(+)
drivers/gpu/drm/drm_dp_dual_mode_helper.c +0 -0
index 488355b..a0e603b 100644
@@ -142,6 +142,11 @@ static bool is_hdmi_adaptor(const char hdmi_id[DP_DUAL_MODE_HDMI_ID_LEN])
  		      sizeof(dp_dual_mode_hdmi_id)) == 0;
  }

drivers/gpu/drm/drm_dp_dual_mode_helper.c +5 -0
+static bool is_type1_adaptor(uint8_t adaptor_id)
+{
+	return adaptor_id == 0 || adaptor_id == 0xff;
+}
+

 static bool is_type2_adaptor(uint8_t adaptor_id) {
  return adaptor_id == (DP_DUAL_MODE_TYPE_TYPE2 |

Quoted 8 lines

drivers/gpu/drm/drm_dp_dual_mode_helper.c enum drm_dp_dual_mode_type drm_dp_dual_mode_detect(struct i2c_adapter *adapter) · line 202

Quoted 6 lines
drivers/gpu/drm/drm_dp_dual_mode_helper.c +2 -0
@@ -193,6 +198,8 @@ enum drm_dp_dual_mode_type drm_dp_dual_mode_detect(struct i2c_adapter *adapter)
  	 */
  	ret = drm_dp_dual_mode_read(adapter, DP_DUAL_MODE_HDMI_ID,
  				    hdmi_id, sizeof(hdmi_id));
+	DRM_DEBUG_KMS("DP dual mode HDMI ID: %*pE (err %zd)\n",
+		      ret ? 0 : (int)sizeof(hdmi_id), hdmi_id, ret);

What does that %*pE print with size==0, nothing?

Yes.

Quoted 12 lines
Quoted 12 lines
drivers/gpu/drm/drm_dp_dual_mode_helper.c +0 -0
  	if (ret)
  		return DRM_DP_DUAL_MODE_UNKNOWN;

drivers/gpu/drm/drm_dp_dual_mode_helper.c +2 -0
@@ -210,6 +217,8 @@ enum drm_dp_dual_mode_type drm_dp_dual_mode_detect(struct i2c_adapter *adapter)
  	 */
  	ret = drm_dp_dual_mode_read(adapter, DP_DUAL_MODE_ADAPTOR_ID,
  				    &adaptor_id, sizeof(adaptor_id));
+	DRM_DEBUG_KMS("DP dual mode adaptor ID: %02x (err %zd)\n",
+		      adaptor_id, ret);
  	if (ret == 0) {
  		if (is_lspcon_adaptor(hdmi_id, adaptor_id))
  			return DRM_DP_DUAL_MODE_LSPCON;
Quoted 8 lines

drivers/gpu/drm/drm_dp_dual_mode_helper.c enum drm_dp_dual_mode_type drm_dp_dual_mode_detect(struct i2c_adapter *adapter) · line 231

Quoted 5 lines
drivers/gpu/drm/drm_dp_dual_mode_helper.c +0 -0
@@ -219,6 +228,10 @@ enum drm_dp_dual_mode_type drm_dp_dual_mode_detect(struct i2c_adapter *adapter)

  else
  return DRM_DP_DUAL_MODE_TYPE2_DVI; }

drivers/gpu/drm/drm_dp_dual_mode_helper.c +1 -0
+		if (!is_type1_adaptor(adaptor_id) && adaptor_id != hdmi_id[0])

                                                     ^^^^^^^^^^^^^^^^^^^^^^^^ I take it that was to account for the broken adaptors that ignore the offset?

Yep.

Quoted 5 lines

drivers/gpu/drm/drm_dp_dual_mode_helper.c enum drm_dp_dual_mode_type drm_dp_dual_mode_detect(struct i2c_adapter *adapter) · line 233

Quoted 2 lines
drivers/gpu/drm/drm_dp_dual_mode_helper.c +2 -0
+			DRM_ERROR("Unexpected DP dual mode adapter ID %02x\n",
+				  adaptor_id);

s/adapter/adaptor/ since that's what the spec called it, and I continued down the same path to not confuse it the the i2c adapter.

Ok.

Quoted 10 lines

With that

Quoted 6 lines

+
  }

  if (is_hdmi_adaptor(hdmi_id))
--
2.5.0

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel

#3 lore raw

✗ Fi.CI.BAT: failure for drm: Print some debug/error info during DP dual mode detect

In reply to Imre Deak
== Series Details ==

== Series Details ==

Series: drm: Print some debug/error info during DP dual mode detect
URL : https://patchwork.freedesktop.org/series/14412/
State : failure

== Summary ==

Series 14412v1 drm: Print some debug/error info during DP dual mode detect
https://patchwork.freedesktop.org/api/1.0/series/14412/revisions/1/mbox/

Test kms_pipe_crc_basic:

        Subgroup suspend-read-crc-pipe-c:
                pass       -> INCOMPLETE (fi-skl-6260u)
fi-bdw-5557u     total:246  pass:231  dwarn:0   dfail:0   fail:0   skip:15 
fi-bsw-n3050     total:246  pass:204  dwarn:0   dfail:0   fail:0   skip:42 
fi-bxt-t5700     total:246  pass:216  dwarn:0   dfail:0   fail:0   skip:30 
fi-byt-j1900     total:246  pass:215  dwarn:0   dfail:0   fail:0   skip:31 
fi-byt-n2820     total:246  pass:211  dwarn:0   dfail:0   fail:0   skip:35 
fi-hsw-4770      total:246  pass:224  dwarn:0   dfail:0   fail:0   skip:22 
fi-hsw-4770r     total:246  pass:223  dwarn:0   dfail:0   fail:0   skip:23 
fi-ilk-650       total:246  pass:185  dwarn:0   dfail:0   fail:0   skip:61 
fi-ivb-3520m     total:246  pass:220  dwarn:0   dfail:0   fail:0   skip:26 
fi-ivb-3770      total:246  pass:220  dwarn:0   dfail:0   fail:0   skip:26 
fi-kbl-7200u     total:246  pass:222  dwarn:0   dfail:0   fail:0   skip:24 
fi-skl-6260u     total:210  pass:197  dwarn:0   dfail:0   fail:0   skip:12 
fi-skl-6700hq    total:246  pass:223  dwarn:0   dfail:0   fail:0   skip:23 
fi-skl-6700k     total:246  pass:222  dwarn:1   dfail:0   fail:0   skip:23 
fi-skl-6770hq    total:246  pass:232  dwarn:0   dfail:0   fail:0   skip:14 
fi-snb-2520m     total:246  pass:209  dwarn:0   dfail:0   fail:0   skip:37 
fi-snb-2600      total:246  pass:208  dwarn:0   dfail:0   fail:0   skip:38 

fe116755dd4cf23c17c8ad50227ca4376480d015 drm-intel-nightly: 2016y-10m-26d-14h-34m-03s UTC integration manifest 5cff751 drm: Print some debug/error info during DP dual mode detect

Full results at https://intel-gfx-ci.01.org/CI/Patchwork_2825/

== Logs ==

For more details see: https://intel-gfx-ci.01.org/CI/Patchwork_2825/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

author
#4 lore raw

PATCH v2 1/1 drm: Print some debug/error info during DP dual mode detect

In reply to Imre Deak

There's at least one LSPCON device that occasionally returns an unexpected adaptor ID which leads to a failed detect. Print some debug info to help debugging this and future cases. Also print an error for an unexpected adaptor ID, so users can report it.

v2:
- s/adapter/adaptor/ and add code comment about incorrect type 1 adaptor IDs. (Ville)

---
 drivers/gpu/drm/drm_dp_dual_mode_helper.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
drivers/gpu/drm/drm_dp_dual_mode_helper.c +18 -0
index 488355b..e025639 100644
@@ -142,6 +142,11 @@ static bool is_hdmi_adaptor(const char hdmi_id[DP_DUAL_MODE_HDMI_ID_LEN])
 		      sizeof(dp_dual_mode_hdmi_id)) == 0;
 }
 
+static bool is_type1_adaptor(uint8_t adaptor_id)
+{
+	return adaptor_id == 0 || adaptor_id == 0xff;
+}
+
 static bool is_type2_adaptor(uint8_t adaptor_id)
 {
 	return adaptor_id == (DP_DUAL_MODE_TYPE_TYPE2 |
@@ -193,6 +198,8 @@ enum drm_dp_dual_mode_type drm_dp_dual_mode_detect(struct i2c_adapter *adapter)
 	 */
 	ret = drm_dp_dual_mode_read(adapter, DP_DUAL_MODE_HDMI_ID,
 				    hdmi_id, sizeof(hdmi_id));
+	DRM_DEBUG_KMS("DP dual mode HDMI ID: %*pE (err %zd)\n",
+		      ret ? 0 : (int)sizeof(hdmi_id), hdmi_id, ret);
 	if (ret)
 		return DRM_DP_DUAL_MODE_UNKNOWN;
 
@@ -210,6 +217,8 @@ enum drm_dp_dual_mode_type drm_dp_dual_mode_detect(struct i2c_adapter *adapter)
 	 */
 	ret = drm_dp_dual_mode_read(adapter, DP_DUAL_MODE_ADAPTOR_ID,
 				    &adaptor_id, sizeof(adaptor_id));
+	DRM_DEBUG_KMS("DP dual mode adaptor ID: %02x (err %zd)\n",
+		      adaptor_id, ret);
 	if (ret == 0) {
 		if (is_lspcon_adaptor(hdmi_id, adaptor_id))
 			return DRM_DP_DUAL_MODE_LSPCON;
@@ -219,6 +228,15 @@ enum drm_dp_dual_mode_type drm_dp_dual_mode_detect(struct i2c_adapter *adapter)
 			else
 				return DRM_DP_DUAL_MODE_TYPE2_DVI;
 		}
+		/*
+		 * If neither a proper type 1 ID nor a broken type 1 adaptor
+		 * as described above, assume type 1, but let the user know
+		 * that we may have misdetected the type.
+		 */
+		if (!is_type1_adaptor(adaptor_id) && adaptor_id != hdmi_id[0])
+			DRM_ERROR("Unexpected DP dual mode adaptor ID %02x\n",
+				  adaptor_id);
+
 	}
 
 	if (is_hdmi_adaptor(hdmi_id))
Signature · 6 lines
2.5.0

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Applied
#5 lore raw
Quoted 5 lines · Imre Deak

There's at least one LSPCON device that occasionally returns an unexpected adaptor ID which leads to a failed detect. Print some debug info to help debugging this and future cases. Also print an error for an unexpected adaptor ID, so users can report it.

Quoted 8 lines

v2:
- s/adapter/adaptor/ and add code comment about incorrect type 1 adaptor IDs. (Ville)

Applied to drm-misc, thanks

Sean

Quoted 57 lines
---
 drivers/gpu/drm/drm_dp_dual_mode_helper.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
drivers/gpu/drm/drm_dp_dual_mode_helper.c +18 -1
index 488355b..e025639 100644
@@ -142,6 +142,11 @@ static bool is_hdmi_adaptor(const char hdmi_id[DP_DUAL_MODE_HDMI_ID_LEN])
                      sizeof(dp_dual_mode_hdmi_id)) == 0;
 }
 
+static bool is_type1_adaptor(uint8_t adaptor_id)
+{
+       return adaptor_id == 0 || adaptor_id == 0xff;
+}
+
 static bool is_type2_adaptor(uint8_t adaptor_id)
 {
        return adaptor_id == (DP_DUAL_MODE_TYPE_TYPE2 |
@@ -193,6 +198,8 @@ enum drm_dp_dual_mode_type drm_dp_dual_mode_detect(struct i2c_adapter *adapter)
         */
        ret = drm_dp_dual_mode_read(adapter, DP_DUAL_MODE_HDMI_ID,
                                    hdmi_id, sizeof(hdmi_id));
+       DRM_DEBUG_KMS("DP dual mode HDMI ID: %*pE (err %zd)\n",
+                     ret ? 0 : (int)sizeof(hdmi_id), hdmi_id, ret);
        if (ret)
                return DRM_DP_DUAL_MODE_UNKNOWN;
 
@@ -210,6 +217,8 @@ enum drm_dp_dual_mode_type drm_dp_dual_mode_detect(struct i2c_adapter *adapter)
         */
        ret = drm_dp_dual_mode_read(adapter, DP_DUAL_MODE_ADAPTOR_ID,
                                    &adaptor_id, sizeof(adaptor_id));
+       DRM_DEBUG_KMS("DP dual mode adaptor ID: %02x (err %zd)\n",
+                     adaptor_id, ret);
        if (ret == 0) {
                if (is_lspcon_adaptor(hdmi_id, adaptor_id))
                        return DRM_DP_DUAL_MODE_LSPCON;
@@ -219,6 +228,15 @@ enum drm_dp_dual_mode_type drm_dp_dual_mode_detect(struct i2c_adapter *adapter)
                        else
                                return DRM_DP_DUAL_MODE_TYPE2_DVI;
                }
+               /*
+                * If neither a proper type 1 ID nor a broken type 1 adaptor
+                * as described above, assume type 1, but let the user know
+                * that we may have misdetected the type.
+                */
+               if (!is_type1_adaptor(adaptor_id) && adaptor_id != hdmi_id[0])
+                       DRM_ERROR("Unexpected DP dual mode adaptor ID %02x\n",
+                                 adaptor_id);
+
        }
 
        if (is_hdmi_adaptor(hdmi_id))
--

2.5.0

Quoted 4 lines

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#6 lore raw

✓ Fi.CI.BAT: success for drm: Print some debug/error info during DP dual mode detect (rev2)

In reply to Imre Deak
== Series Details ==

== Series Details ==

Series: drm: Print some debug/error info during DP dual mode detect (rev2)
URL : https://patchwork.freedesktop.org/series/14412/
State : success

== Summary ==

Series 14412v2 drm: Print some debug/error info during DP dual mode detect
https://patchwork.freedesktop.org/api/1.0/series/14412/revisions/2/mbox/

fi-bdw-5557u     total:246  pass:231  dwarn:0   dfail:0   fail:0   skip:15 
fi-bsw-n3050     total:246  pass:204  dwarn:0   dfail:0   fail:0   skip:42 
fi-bxt-t5700     total:246  pass:216  dwarn:0   dfail:0   fail:0   skip:30 
fi-byt-j1900     total:246  pass:215  dwarn:0   dfail:0   fail:0   skip:31 
fi-byt-n2820     total:246  pass:211  dwarn:0   dfail:0   fail:0   skip:35 
fi-hsw-4770      total:246  pass:224  dwarn:0   dfail:0   fail:0   skip:22 
fi-hsw-4770r     total:246  pass:223  dwarn:0   dfail:0   fail:0   skip:23 
fi-ilk-650       total:246  pass:185  dwarn:0   dfail:0   fail:0   skip:61 
fi-ivb-3520m     total:246  pass:220  dwarn:0   dfail:0   fail:0   skip:26 
fi-ivb-3770      total:246  pass:220  dwarn:0   dfail:0   fail:0   skip:26 
fi-kbl-7200u     total:246  pass:222  dwarn:0   dfail:0   fail:0   skip:24 
fi-skl-6260u     total:246  pass:232  dwarn:0   dfail:0   fail:0   skip:14 
fi-skl-6700hq    total:246  pass:223  dwarn:0   dfail:0   fail:0   skip:23 
fi-skl-6700k     total:246  pass:222  dwarn:1   dfail:0   fail:0   skip:23 
fi-skl-6770hq    total:246  pass:232  dwarn:0   dfail:0   fail:0   skip:14 
fi-snb-2520m     total:246  pass:209  dwarn:0   dfail:0   fail:0   skip:37 
fi-snb-2600      total:246  pass:208  dwarn:0   dfail:0   fail:0   skip:38 

fe116755dd4cf23c17c8ad50227ca4376480d015 drm-intel-nightly: 2016y-10m-26d-14h-34m-03s UTC integration manifest 99d41e5 drm: Print some debug/error info during DP dual mode detect

Full results at https://intel-gfx-ci.01.org/CI/Patchwork_2827/

== Logs ==

For more details see: https://intel-gfx-ci.01.org/CI/Patchwork_2827/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx