Patch "ARM: dts: fix RealView EB SMSC ethernet version" has been added to the 4.8-stable tree

This is a note to let you know that I've just added the patch titled

ARM: dts: fix RealView EB SMSC ethernet version

to the 4.8-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
arm-dts-fix-realview-eb-smsc-ethernet-version.patch
and it can be found in the queue-4.8 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

From: Linus Walleij <[email protected]>
Date: Thu, 8 Sep 2016 10:48:38 +0200
Subject: ARM: dts: fix RealView EB SMSC ethernet version

From: Linus Walleij <[email protected]>

commit c4ad72560df11961d3e57fb0fadfe88a9863c9ad upstream.

The ethernet version in the earlier RealView EB variants is LAN91C111 and not LAN9118 according to ARM DUI 0303E "RealView Emulation Baseboard User Guide" page 3-57.

Make sure that this is used for the base variant of the board.

As the DT bindings for LAN91C111 does not specify any power supplies, these need to be deleted from the DTS file.

---
 arch/arm/boot/dts/arm-realview-eb.dtsi |   23 +++++++----------------
 1 file changed, 7 insertions(+), 16 deletions(-)

@@ -51,14 +51,6 @@
 		regulator-boot-on;
         };
 
-	veth: fixedregulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "veth";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-	};
-
 	xtal24mhz: xtal24mhz@24M {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";

@@ -134,16 +126,15 @@
 		bank-width = <4>;
 	};
 
-	/* SMSC 9118 ethernet with PHY and EEPROM */
+	/* SMSC LAN91C111 ethernet with PHY and EEPROM */
 	ethernet: ethernet@4e000000 {
-		compatible = "smsc,lan9118", "smsc,lan9115";
+		compatible = "smsc,lan91c111";
 		reg = <0x4e000000 0x10000>;
-		phy-mode = "mii";
-		reg-io-width = <4>;
-		smsc,irq-active-high;
-		smsc,irq-push-pull;
-		vdd33a-supply = <&veth>;
-		vddvario-supply = <&veth>;
+		/*
+		 * This means the adapter can be accessed with 8, 16 or
+		 * 32 bit reads/writes.
+		 */
+		reg-io-width = <7>;
 	};
 
 	usb: usb@4f000000 {

Patches currently in stable-queue which might be from [email protected] are

queue-4.8/pinctrl-qcom-fix-masking-of-pinmux-functions.patch queue-4.8/arm-dts-fix-realview-eb-smsc-ethernet-version.patch