Skip to contentSkip to conversation

acer-wmi: setup accelerometer when machine has appropriate notify event

PATCH In review Lee, Chun-Yi 3 participants 3 messages Nov 3, 2016 – Jan 3, 2017

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 acer-wmi: setup accelerometer when machine has appropriate notify event

The accelerometer event relies on on the ACERWMID_EVENT_GUID notify. So, this patch changes the codes to setup accelerometer input device when detected ACERWMID_EVENT_GUID. It avoids that the accel input device created on every acer machines.

In addition, patch adds a clearly parsing logic of accelerometer hid to acer_wmi_get_handle_cb callback function. It is positive matching the "SENR" name with "BST0001" device to avoid non-supported hardware.

v2:
Fix the string comparison logic of SENR.

---
 drivers/platform/x86/acer-wmi.c | 22 ++++++++++++++++++----
 1 file changed, 18 insertions(+), 4 deletions(-)
drivers/platform/x86/acer-wmi.c +18 -4
Index: linux/drivers/platform/x86/acer-wmi.c
===================================================================
@@ -1808,11 +1808,24 @@ static int __init acer_wmi_enable_lm(voi
 	return status;
 }
 
+#define ACER_WMID_ACCEL_HID	"BST0001"
+
 static acpi_status __init acer_wmi_get_handle_cb(acpi_handle ah, u32 level,
 						void *ctx, void **retval)
 {
+	struct acpi_device *dev;
+
+	if (!strcmp(ctx, "SENR")) {
+		if (acpi_bus_get_device(ah, &dev))
+			return AE_OK;
+		if (!strcmp(ACER_WMID_ACCEL_HID, acpi_device_hid(dev)))
+			return AE_OK;
+	} else
+		return AE_OK;
+
 	*(acpi_handle *)retval = ah;
-	return AE_OK;
+
+	return AE_CTRL_TERMINATE;
 }
 
 static int __init acer_wmi_get_handle(const char *name, const char *prop,
@@ -1839,7 +1852,7 @@ static int __init acer_wmi_accel_setup(v
 {
 	int err;
 
-	err = acer_wmi_get_handle("SENR", "BST0001", &gsensor_handle);
+	err = acer_wmi_get_handle("SENR", ACER_WMID_ACCEL_HID, &gsensor_handle);
 	if (err)
 		return err;
 
@@ -2177,10 +2190,11 @@ static int __init acer_wmi_init(void)
 		err = acer_wmi_input_setup();
 		if (err)
 			return err;
+		err = acer_wmi_accel_setup();
+		if (err)
+			return err;
 	}
 
-	acer_wmi_accel_setup();
-
 	err = platform_driver_register(&acer_platform_driver);
 	if (err) {
 		pr_err("Unable to register platform driver\n");
#1 lore raw
Quoted 9 lines · Chun-Yi

The accelerometer event relies on on the ACERWMID_EVENT_GUID notify. So, this patch changes the codes to setup accelerometer input device when detected ACERWMID_EVENT_GUID. It avoids that the accel input device created on every acer machines.

In addition, patch adds a clearly parsing logic of accelerometer hid to acer_wmi_get_handle_cb callback function. It is positive matching the "SENR" name with "BST0001" device to avoid non-supported hardware.

Pushed to testing with slightly massaged commit message. Thanks.

Quoted 67 lines

v2:
Fix the string comparison logic of SENR.

---
 drivers/platform/x86/acer-wmi.c | 22 ++++++++++++++++++----
 1 file changed, 18 insertions(+), 4 deletions(-)

Index: linux/drivers/platform/x86/acer-wmi.c
===================================================================

drivers/platform/x86/acer-wmi.c +18 -5
@@ -1808,11 +1808,24 @@ static int __init acer_wmi_enable_lm(voi
        return status;
 }
 
+#define ACER_WMID_ACCEL_HID    "BST0001"
+
 static acpi_status __init acer_wmi_get_handle_cb(acpi_handle ah, u32 level,
                                                void *ctx, void **retval)
 {
+       struct acpi_device *dev;
+
+       if (!strcmp(ctx, "SENR")) {
+               if (acpi_bus_get_device(ah, &dev))
+                       return AE_OK;
+               if (!strcmp(ACER_WMID_ACCEL_HID, acpi_device_hid(dev)))
+                       return AE_OK;
+       } else
+               return AE_OK;
+
        *(acpi_handle *)retval = ah;
-       return AE_OK;
+
+       return AE_CTRL_TERMINATE;
 }
 
 static int __init acer_wmi_get_handle(const char *name, const char *prop,
@@ -1839,7 +1852,7 @@ static int __init acer_wmi_accel_setup(v
 {
        int err;
 
-       err = acer_wmi_get_handle("SENR", "BST0001", &gsensor_handle);
+       err = acer_wmi_get_handle("SENR", ACER_WMID_ACCEL_HID, &gsensor_handle);
        if (err)
                return err;
 
@@ -2177,10 +2190,11 @@ static int __init acer_wmi_init(void)
                err = acer_wmi_input_setup();
                if (err)
                        return err;
+               err = acer_wmi_accel_setup();
+               if (err)
+                       return err;
        }
 
-       acer_wmi_accel_setup();
-
        err = platform_driver_register(&acer_platform_driver);
        if (err) {
                pr_err("Unable to register platform driver\n");
--

To unsubscribe from this list: send the line "unsubscribe platform-driver-x86" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

Signature · 2 lines
With Best Regards,
Andy Shevchenko
maintainer
#2 lore raw
Quoted 6 lines · Andy Shevchenko
Quoted 5 lines · Chun-Yi

The accelerometer event relies on on the ACERWMID_EVENT_GUID notify. So, this patch changes the codes to setup accelerometer input device when detected ACERWMID_EVENT_GUID. It avoids that the accel input device created on every acer machines.

Quoted 8 lines
Quoted 4 lines

In addition, patch adds a clearly parsing logic of accelerometer hid to acer_wmi_get_handle_cb callback function. It is positive matching the "SENR" name with "BST0001" device to avoid non-supported hardware.

Pushed to testing with slightly massaged commit message. Thanks.

Thanks a lot!
Joey Lee