drm/i915/audio: fix hdmi audio noise issue
Subsystems (2)
PATCH 1/1 drm/i915/audio: fix hdmi audio noise issue
From: Libin Yang <[email protected]>
This issue is caused by:6014ac12: drm/i915/audio: set proper N/M in modeset
Some special monitors will have noise or even no sound after applying the patch 6014ac12.
In patch 6014ac12, it will reset the cts value to 0 for HDMI. However, we need disable Enable CTS or M Prog bit. This is the initial setting after HW reset.
--- drivers/gpu/drm/i915/intel_audio.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-)
drivers/gpu/drm/i915/intel_audio.c +12 -3
@@ -332,6 +332,13 @@ hsw_hdmi_audio_config_update(struct intel_crtc *intel_crtc, enum port port,int n;u32 tmp; +/* reset CTS value to 0 */ + tmp =I915_READ (HSW_AUD_M_CTS_ENABLE (pipe)); + tmp &= ~AUD_CONFIG_M_MASK ; + tmp &= ~AUD_M_CTS_M_VALUE_INDEX ; + tmp |=AUD_M_CTS_M_PROG_ENABLE ; +I915_WRITE (HSW_AUD_M_CTS_ENABLE (pipe), tmp); + tmp =I915_READ (HSW_AUD_CFG (pipe)); tmp &= ~AUD_CONFIG_N_VALUE_INDEX ; tmp &= ~AUD_CONFIG_PIXEL_CLOCK_HDMI_MASK ;
@@ -351,10 +358,12 @@ hsw_hdmi_audio_config_update(struct intel_crtc *intel_crtc, enum port port,I915_WRITE (HSW_AUD_CFG (pipe), tmp); +/* +* Let's disable "Enable CTS or M Prog bit" +* and let HW calculate the value +*/ tmp =I915_READ (HSW_AUD_M_CTS_ENABLE (pipe)); - tmp &= ~AUD_CONFIG_M_MASK ; - tmp &= ~AUD_M_CTS_M_VALUE_INDEX ; - tmp |=AUD_M_CTS_M_PROG_ENABLE ; + tmp &= ~AUD_M_CTS_M_PROG_ENABLE ;I915_WRITE (HSW_AUD_M_CTS_ENABLE (pipe), tmp); }
Signature · 6 lines
2.7.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.BAT: success for drm/i915/audio: fix hdmi audio noise issue
== Series Details ==
== Series Details ==
Series: drm/i915/audio: fix hdmi audio noise issue
URL : https://patchwork.freedesktop.org/series/15012/
State : success
== Summary ==
Series 15012v1 drm/i915/audio: fix hdmi audio noise issue
https://patchwork.freedesktop.org/api/1.0/series/15012/revisions/1/mbox/
fi-bdw-5557u total:244 pass:229 dwarn:0 dfail:0 fail:0 skip:15 fi-bsw-n3050 total:244 pass:204 dwarn:0 dfail:0 fail:0 skip:40 fi-bxt-t5700 total:244 pass:216 dwarn:0 dfail:0 fail:0 skip:28 fi-byt-j1900 total:244 pass:216 dwarn:0 dfail:0 fail:0 skip:28 fi-byt-n2820 total:244 pass:212 dwarn:0 dfail:0 fail:0 skip:32 fi-hsw-4770 total:244 pass:224 dwarn:0 dfail:0 fail:0 skip:20 fi-hsw-4770r total:244 pass:224 dwarn:0 dfail:0 fail:0 skip:20 fi-ilk-650 total:244 pass:191 dwarn:0 dfail:0 fail:0 skip:53 fi-ivb-3520m total:244 pass:222 dwarn:0 dfail:0 fail:0 skip:22 fi-ivb-3770 total:244 pass:222 dwarn:0 dfail:0 fail:0 skip:22 fi-kbl-7200u total:244 pass:222 dwarn:0 dfail:0 fail:0 skip:22 fi-skl-6260u total:244 pass:230 dwarn:0 dfail:0 fail:0 skip:14 fi-skl-6700hq total:244 pass:223 dwarn:0 dfail:0 fail:0 skip:21 fi-skl-6700k total:244 pass:222 dwarn:1 dfail:0 fail:0 skip:21 fi-snb-2520m total:244 pass:212 dwarn:0 dfail:0 fail:0 skip:32 fi-snb-2600 total:244 pass:211 dwarn:0 dfail:0 fail:0 skip:33
d761364280c79ec14915166048d038b67e8a5477 drm-intel-nightly: 2016y-11m-08d-21h-38m-12s UTC integration manifest abc7e21 drm/i915/audio: fix hdmi audio noise issue
== Logs ==
For more details see: https://intel-gfx-ci.01.org/CI/Patchwork_2939/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Jani Nikula
maintainerQuoted 5 lines · On Wed, 09 Nov 2016, [email protected] wrote:
From: Libin Yang <[email protected]>
This issue is caused by:
6014ac12: drm/i915/audio: set proper N/M in modeset
Quoted 7 lines
Some special monitors will have noise or even no sound after applying the patch
6014ac12.In patch
6014ac12, it will reset the cts value to 0 for HDMI. However, we need disable Enable CTS or M Prog bit. This is the initial setting after HW reset.
Quoted 27 lines
Signed-off-by Libin Yang <[email protected]>--- drivers/gpu/drm/i915/intel_audio.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-)drivers/gpu/drm/i915/intel_audio.c +7
-0@@ -332,6 +332,13 @@ hsw_hdmi_audio_config_update(struct intel_crtc *intel_crtc, enum port port,int n;u32 tmp; +/* reset CTS value to 0 */ + tmp =I915_READ (HSW_AUD_M_CTS_ENABLE (pipe)); + tmp &= ~AUD_CONFIG_M_MASK ; + tmp &= ~AUD_M_CTS_M_VALUE_INDEX ; + tmp |=AUD_M_CTS_M_PROG_ENABLE ; +I915_WRITE (HSW_AUD_M_CTS_ENABLE (pipe), tmp); + tmp =I915_READ (HSW_AUD_CFG (pipe)); tmp &= ~AUD_CONFIG_N_VALUE_INDEX ; tmp &= ~AUD_CONFIG_PIXEL_CLOCK_HDMI_MASK ;@@ -351,10 +358,12 @@ hsw_hdmi_audio_config_update(struct intel_crtc *intel_crtc, enum port port,I915_WRITE (HSW_AUD_CFG (pipe), tmp);
drivers/gpu/drm/i915/intel_audio.c hsw_hdmi_audio_config_update(struct intel_crtc *intel_crtc, enum port port, · line 367
Quoted 10 lines
drivers/gpu/drm/i915/intel_audio.c +5
-3+/* +* Let's disable "Enable CTS or M Prog bit" +* and let HW calculate the value +*/ tmp =I915_READ (HSW_AUD_M_CTS_ENABLE (pipe)); - tmp &= ~AUD_CONFIG_M_MASK ; - tmp &= ~AUD_M_CTS_M_VALUE_INDEX ; - tmp |=AUD_M_CTS_M_PROG_ENABLE ; + tmp &= ~AUD_M_CTS_M_PROG_ENABLE ;I915_WRITE (HSW_AUD_M_CTS_ENABLE (pipe), tmp);
Is it necessary to do the HSW_AUD_M_CTS_ENABLE updates in two places? Why do you both enable and disable AUD_M_CTS_M_PROG_ENABLE bit here?
BR,
Jani.
Quoted 1 line
drivers/gpu/drm/i915/intel_audio.c +0
-0}
Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 19 lines
-----Original Message-----
From: Jani Nikula [mailto:[email protected]]
Sent: Wednesday, November 9, 2016 6:59 PM
To: Yang, Libin <[email protected]>; [email protected]; [email protected]; Vetter, Daniel <[email protected]>; [email protected]
Cc: Yang, Libin <[email protected]>
Subject: Re: [PATCH] drm/i915/audio: fix hdmi audio noise issueQuoted 8 lines · On Wed, 09 Nov 2016, [email protected] wrote:
From: Libin Yang <[email protected]>
This issue is caused by:
6014ac12: drm/i915/audio: set proper N/M in modesetSome special monitors will have noise or even no sound after applying the patch
6014ac12.
Quoted 6 lines
Quoted 4 lines
In patch
6014ac12, it will reset the cts value to 0 for HDMI. However, we need disable Enable CTS or M Prog bit. This is the initial setting after HW reset.Fixes 6014ac122ed0 ("drm/i915/audio: set proper N/M in modeset")
Get it. Thanks.
Quoted 45 lines
drivers/gpu/drm/i915/intel_audio.c hsw_hdmi_audio_config_update(struct intel_crtc
Quoted 12 lines
Signed-off-by Libin Yang <[email protected]>--- drivers/gpu/drm/i915/intel_audio.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-)drivers/gpu/drm/i915/intel_audio.c +0
-0@@ -332,6 +332,13 @@ hsw_hdmi_audio_config_update(struct intel_crtc
*intel_crtc, enum port port,Quoted 18 lines
drivers/gpu/drm/i915/intel_audio.c +7
-0int n;u32 tmp; +/* reset CTS value to 0 */ + tmp =I915_READ (HSW_AUD_M_CTS_ENABLE (pipe)); + tmp &= ~AUD_CONFIG_M_MASK ; + tmp &= ~AUD_M_CTS_M_VALUE_INDEX ; + tmp |=AUD_M_CTS_M_PROG_ENABLE ; +I915_WRITE (HSW_AUD_M_CTS_ENABLE (pipe), tmp); + tmp =I915_READ (HSW_AUD_CFG (pipe)); tmp &= ~AUD_CONFIG_N_VALUE_INDEX ; tmp &= ~AUD_CONFIG_PIXEL_CLOCK_HDMI_MASK ;@@ -351,10 +358,12 @@ hsw_hdmi_audio_config_update(struct intel_crtc *intel_crtc, enum port port,I915_WRITE (HSW_AUD_CFG (pipe ),tmp );drivers/gpu/drm/i915/intel_audio.c hsw_hdmi_audio_config_update(struct intel_crtc · line 368
Quoted 10 lines
drivers/gpu/drm/i915/intel_audio.c +5
-3+/* +* Let's disable "Enable CTS or M Prog bit" +* and let HW calculate the value +*/ tmp =I915_READ (HSW_AUD_M_CTS_ENABLE (pipe)); - tmp &= ~AUD_CONFIG_M_MASK ; - tmp &= ~AUD_M_CTS_M_VALUE_INDEX ; - tmp |=AUD_M_CTS_M_PROG_ENABLE ; + tmp &= ~AUD_M_CTS_M_PROG_ENABLE ;I915_WRITE (HSW_AUD_M_CTS_ENABLE (pipe), tmp);Is it necessary to do the
HSW_AUD_M_CTS_ENABLEupdates in two places? Why do you both enable and disableAUD_M_CTS_M_PROG_ENABLEbit here?
Quoted 8 lines
BR,
Jani.drivers/gpu/drm/i915/intel_audio.c hsw_hdmi_audio_config_update(struct intel_crtc · line 369
Quoted 1 line
drivers/gpu/drm/i915/intel_audio.c +0
-0}--
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx