Skip to contentSkip to conversation

ASoC: add rt5665 codec driver

PATCH New Bard Liao 1 participant 1 message Nov 14, 2016

Subsystems (4)
lore
Share & tools
lore

Bard Liao

author
#0 lore raw

PATCH v3 1/1 ASoC: add rt5665 codec driver

This is the initial codec driver for rt5665.

---
v2:
* Use devm_regulator_bulk_get, and the regulator are not optional.
* Separate each slot for the AIF interface.
v3:
* Use constant supply names.

---
 Documentation/devicetree/bindings/sound/rt5665.txt |   68 +
 include/sound/rt5665.h                             |   47 +
 sound/soc/codecs/Kconfig                           |    6 +
 sound/soc/codecs/Makefile                          |    2 +
 sound/soc/codecs/rt5665.c                          | 4875 ++++++++++++++++++++
 sound/soc/codecs/rt5665.h                          | 1990 ++++++++
 6 files changed, 6988 insertions(+)
 create mode 100755 Documentation/devicetree/bindings/sound/rt5665.txt
 create mode 100755 include/sound/rt5665.h
 create mode 100644 sound/soc/codecs/rt5665.c
 create mode 100644 sound/soc/codecs/rt5665.h
Documentation/devicetree/bindings/sound/rt5665.txt new file +68 -0
new file mode 100755
index 0000000..419c892
@@ -0,0 +1,68 @@
+RT5665/RT5666/RT5668 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+- compatible : One of "realtek,rt5665", "realtek,rt5666" or "realtek,rt5668".
+
+- reg : The I2C address of the device.
+
+- interrupts : The CODEC's interrupt output.
+
+Optional properties:
+
+- realtek,in1-differential
+- realtek,in2-differential
+- realtek,in3-differential
+- realtek,in4-differential
+  Boolean. Indicate MIC1/2/3/4 input are differential, rather than single-ended.
+
+- realtek,dmic1-data-pin
+  0: dmic1 is not used
+  1: using GPIO4 pin as dmic1 data pin
+  2: using IN2N pin as dmic2 data pin
+
+- realtek,dmic2-data-pin
+  0: dmic2 is not used
+  1: using GPIO5 pin as dmic2 data pin
+  2: using IN2P pin as dmic2 data pin
+
+- realtek,jd-src
+  0: No JD is used
+  1: using JD1 as JD source
+
+- realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin.
+
+Pins on the device (for linking into audio routes) for RT5659/RT5658:
+
+  * DMIC L1
+  * DMIC R1
+  * DMIC L2
+  * DMIC R2
+  * IN1P
+  * IN1N
+  * IN2P
+  * IN2N
+  * IN3P
+  * IN3N
+  * IN4P
+  * IN4N
+  * HPOL
+  * HPOR
+  * LOUTL
+  * LOUTR
+  * MONOOUT
+  * PDML
+  * PDMR
+
+Example:
+
+rt5659 {
+	compatible = "realtek,rt5665";
+	reg = <0x1b>;
+	interrupt-parent = <&gpio>;
+	interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>;
+	realtek,ldo1-en-gpios =
+		<&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
+};
include/sound/rt5665.h new file +47 -0

47 lines not on this page · raw message

sound/soc/codecs/Kconfig +6 -0
index 0b1be61..8b9b0729 100644
@@ -116,6 +116,7 @@ config SND_SOC_ALL_CODECS
 	select SND_SOC_RT5651 if I2C
 	select SND_SOC_RT5659 if I2C
 	select SND_SOC_RT5660 if I2C
+	select SND_SOC_RT5665 if I2C
 	select SND_SOC_RT5663 if I2C
 	select SND_SOC_RT5670 if I2C
 	select SND_SOC_RT5677 if I2C && SPI_MASTER
@@ -662,6 +663,7 @@ config SND_SOC_RL6231
 	default y if SND_SOC_RT5651=y
 	default y if SND_SOC_RT5659=y
 	default y if SND_SOC_RT5660=y
+	default y if SND_SOC_RT5665=y
 	default y if SND_SOC_RT5663=y
 	default y if SND_SOC_RT5670=y
 	default y if SND_SOC_RT5677=y
@@ -672,6 +674,7 @@ config SND_SOC_RL6231
 	default m if SND_SOC_RT5651=m
 	default m if SND_SOC_RT5659=m
 	default m if SND_SOC_RT5660=m
+	default m if SND_SOC_RT5665=m
 	default m if SND_SOC_RT5663=m
 	default m if SND_SOC_RT5670=m
 	default m if SND_SOC_RT5677=m
@@ -721,6 +724,9 @@ config SND_SOC_RT5659
 config SND_SOC_RT5660
 	tristate
 
+config SND_SOC_RT5665
+	tristate
+
 config SND_SOC_RT5663
 	tristate
 
sound/soc/codecs/Makefile +2 -0
index d8984eb..4ab8dac 100644
@@ -117,6 +117,7 @@ snd-soc-rt5645-objs := rt5645.o
 snd-soc-rt5651-objs := rt5651.o
 snd-soc-rt5659-objs := rt5659.o
 snd-soc-rt5660-objs := rt5660.o
+snd-soc-rt5665-objs := rt5665.o
 snd-soc-rt5663-objs := rt5663.o
 snd-soc-rt5670-objs := rt5670.o
 snd-soc-rt5677-objs := rt5677.o
@@ -343,6 +344,7 @@ obj-$(CONFIG_SND_SOC_RT5645)	+= snd-soc-rt5645.o
 obj-$(CONFIG_SND_SOC_RT5651)	+= snd-soc-rt5651.o
 obj-$(CONFIG_SND_SOC_RT5659)	+= snd-soc-rt5659.o
 obj-$(CONFIG_SND_SOC_RT5660)	+= snd-soc-rt5660.o
+obj-$(CONFIG_SND_SOC_RT5665)	+= snd-soc-rt5665.o
 obj-$(CONFIG_SND_SOC_RT5663)	+= snd-soc-rt5663.o
 obj-$(CONFIG_SND_SOC_RT5670)	+= snd-soc-rt5670.o
 obj-$(CONFIG_SND_SOC_RT5677)	+= snd-soc-rt5677.o
sound/soc/codecs/rt5665.c new file +4875 -0

2,841 lines not on this page · raw message

sound/soc/codecs/rt5665.h new file +1990 -0

1,990 lines not on this page · raw message

The rest of this diff is not shown. View the raw message.

Signature · 1 line
1.8.1.1.439.g50a6b54

Part of the diff is not shown here. View the raw message.