patch "USB: serial: ftdi_sio: add support for TI CC3200 LaunchPad" added to usb-linus

This is a note to let you know that I've just added the patch titled

USB: serial: ftdi_sio: add support for TI CC3200 LaunchPad

to my usb git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git
in the usb-linus branch.

The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.)

The patch will hopefully also be merged in Linus's tree for the next -rc kernel release.

If you have any questions about this process, please let me know.

From: Doug Brown <[email protected]>
Date: Fri, 4 Nov 2016 21:18:20 -0700
Subject: USB: serial: ftdi_sio: add support for TI CC3200 LaunchPad

This patch adds support for the TI CC3200 LaunchPad board, which uses a custom USB vendor ID and product ID. Channel A is used for JTAG, and channel B is used for a UART.

---
 drivers/usb/serial/ftdi_sio.c     | 2 ++
 drivers/usb/serial/ftdi_sio_ids.h | 6 ++++++
 2 files changed, 8 insertions(+)

index 0ff7f38d7800..6e9fc8bcc285 100644
@@ -1012,6 +1012,8 @@ static const struct usb_device_id id_table_combined[] = {
 	{ USB_DEVICE(ICPDAS_VID, ICPDAS_I7561U_PID) },
 	{ USB_DEVICE(ICPDAS_VID, ICPDAS_I7563U_PID) },
 	{ USB_DEVICE(WICED_VID, WICED_USB20706V2_PID) },
+	{ USB_DEVICE(TI_VID, TI_CC3200_LAUNCHPAD_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ }					/* Terminating entry */
 };
 

index 21011c0a4c64..48ee04c94a75 100644
@@ -596,6 +596,12 @@
 #define STK541_PID		0x2109 /* Zigbee Controller */
 
 /*
+ * Texas Instruments
+ */
+#define TI_VID			0x0451
+#define TI_CC3200_LAUNCHPAD_PID	0xC32A /* SimpleLink Wi-Fi CC3200 LaunchPad */
+
+/*
  * Blackfin gnICE JTAG
  * http://docs.blackfin.uclinux.org/doku.php?id=hw:jtag:gnice
  */

2.10.2