IMA Instrumentation Support
v2 cover IMA Instrumentation Support
Power 9 has In-Memory-Accumulation (IMA) infrastructure which contains various Performance Monitoring Units (PMUs) at Nest level (these are on-chip but off-core). These Nest PMU counters are handled by a Nest IMA microcode. This microcode runs in the OCC (On-Chip Controller) complex and its purpose is to program the nest counters, collect the counter data and move the counter data to memory.
The IMA infrastructure encapsulates nest (per-chip), core and thread
level counters. While the nest IMA PMUs are handled by the nest IMA
microcode, the core and thread level PMUs are handled by the Core-HPMC
engine. This patchset enables the nest IMA PMUs and is based on the
initial work done by Madhavan Srinivasan.
"Nest Instrumentation Support" : https://lists.ozlabs.org/pipermail/linuxppc-dev/2015-August/132078.html
v1 for this patchset can be found here :
https://lwn.net/Articles/705475/
Nest events:
Per-chip nest instrumentation provides various per-chip metrics such as memory, powerbus, Xlink and Alink bandwidth.
PMU Events' Information:
OPAL obtains the Nest PMU and event information from the IMA Catalog and passes on to the kernel via the device tree. The events' information contains :
- Event name
- Event Offset
- Event description
and, maybe :
- Event scale
- Event unit
Some PMUs may have a common scale and unit values for all their supported events. For those cases, the scale and unit properties for those events must be inherited from the PMU.
The event offset in the memory is where the counter data gets accumulated.
The OPAL-side patches are posted upstream :
https://lists.ozlabs.org/pipermail/skiboot/2016-November/005552.html
The kernel discovers the IMA counters information in the device tree at the "ima-counters" device node which has a compatible field "ibm,opal-in-memory-counters".
Parsing of the Events' information:
To parse the IMA PMUs and events information, the kernel has to discover the "ima-counters" node and walk through the pmu and event nodes.
Here is an excerpt of the dt showing the ima-counters and mcs node:
/dts-v1/;
[...]
ima-counters {
ima-nest-offset = <0x320000>;
compatible = "ibm,opal-in-memory-counters";
ima-nest-size = <0x30000>;
#address-cells = <0x1>;
#size-cells = <0x1>;
phandle = <0x10000238>;
version-id = [00];
mcs0 {
compatible = "ibm,ima-counters-chip";
ranges;
#address-cells = <0x1>;
#size-cells = <0x1>;
phandle = <0x10000279>;
scale = "1.2207e-4";
unit = "MiB";
event@528 {
event-name = "PM_MCS_UP_128B_DATA_XFER_MC0" ;
desc = "Total Read Bandwidth seen on both MCS of MC0";
phandle = <0x1000028c>;
reg = <0x118 0x8>;
};[...]
Quoted 1 line
From the device tree, the kernel parses the PMUs and their events'
information.
After parsing the nest IMA PMUs and their events, the PMUs and their attributes are registered in the kernel.
Example Usage :
# perf list
[...]
nest_mcs0/PM_MCS_DOWN_128B_DATA_XFER_MC0/ [Kernel PMU event]
nest_mcs0/PM_MCS_DOWN_128B_DATA_XFER_MC0_LAST_SAMPLE/ [Kernel PMU event] [...]
# perf stat -e "nest_mcs0/PM_MCS_DOWN_128B_DATA_XFER_MC0/" -a --per-socket
TODOs:
- Add support for Core IMA.
- Add support for thread IMA.
Comments/feedback/suggestions are welcome.
Changelog:
v1 -> v2 :
- Account for the cases where a PMU can have a common scale and unit values for all its supported events (Patch 3/6).
- Fixed a Build error (for maple_defconfig) by enabling ima_pmu.o only for CONFIG_PPC_POWERNV=y (Patch 4/6)
- Read from the "event-name" property instead of "name" for an event node (Patch 3/6).
Hemant Kumar (6):
powerpc/powernv: Data structure and macros definitions powerpc/powernv: Autoload IMA device driver module powerpc/powernv: Detect supported IMA units and its events powerpc/perf: Add event attribute and group to IMA pmus powerpc/perf: Generic ima pmu event functions powerpc/perf: IMA pmu cpumask and cpu hotplug support
arch/powerpc/include/asm/ima-pmu.h | 75 ++++ arch/powerpc/include/asm/opal-api.h | 3 +- arch/powerpc/include/asm/opal.h | 2 + arch/powerpc/perf/Makefile | 6 +- arch/powerpc/perf/ima-pmu.c | 383 ++++++++++++++++++++ arch/powerpc/platforms/powernv/Makefile | 2 +- arch/powerpc/platforms/powernv/opal-ima.c | 480 +++++++++++++++++++++++++ arch/powerpc/platforms/powernv/opal-wrappers.S | 1 + arch/powerpc/platforms/powernv/opal.c | 13 + 9 files changed, 962 insertions(+), 3 deletions(-) create mode 100644 arch/powerpc/include/asm/ima-pmu.h create mode 100644 arch/powerpc/perf/ima-pmu.c create mode 100644 arch/powerpc/platforms/powernv/opal-ima.c
Signature · 1 line
2.7.4
PATCH v2 1/6 powerpc/powernv: Data structure and macros definitions
Create new header file "ima-pmu.h" to add the data structures and macros needed for IMA pmu support.
--- arch/powerpc/include/asm/ima-pmu.h | 73 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 73 insertions(+) create mode 100644 arch/powerpc/include/asm/ima-pmu.h
arch/powerpc/include/asm/ima-pmu.h new file +73 -0
@@ -0,0 +1,73 @@ +#ifndef PPC_POWERNV_IMA_PMU_DEF_H +#define PPC_POWERNV_IMA_PMU_DEF_H + +/* +* Nest Performance Monitor counter support. +* +* Copyright (C) 2016 Madhavan Srinivasan, IBM Corporation. +* (C) 2016 Hemant K Shaw, IBM Corporation. +* +* This program is free software; you can redistribute it and/or modify it +* under the terms of the GNU General Public License version 2 as published +* by the Free Software Foundation. +*/ + +#include <linux/perf_event.h> +#include <linux/slab.h> +#include <linux/of.h> +#include <linux/io.h> +#include <asm/opal.h> + +#define IMA_MAX_CHIPS 32 +#define IMA_MAX_PMUS 32 +#define IMA_MAX_PMU_NAME_LEN 256 + +#define NEST_IMA_ENGINE_START 1 +#define NEST_IMA_ENGINE_STOP 0 +#define NEST_MAX_PAGES 16 + +#define NEST_IMA_PRODUCTION_MODE 1 + +#define IMA_DTB_COMPAT "ibm,opal-in-memory-counters" +#define IMA_DTB_NEST_COMPAT "ibm,ima-counters-chip" + +/* +* Structure to hold per chip specific memory address +* information for nest pmus. Nest Counter data are exported +* in per-chip reserved memory region by the PORE Engine. +*/ +struct perchip_nest_info { +u32 chip_id; +u64 pbase; +u64 vbase[NEST_MAX_PAGES ]; +u64 size; +}; + +/* +* Place holder for nest pmu events and values. +*/ +struct ima_events { +char *ev_name; +char *ev_value; +}; + +/* +* Device tree parser code detects IMA pmu support and +* registers new IMA pmus. This structure will +* hold the pmu functions and attrs for each ima pmu and +* will be referenced at the time of pmu registration. +*/ +struct ima_pmu { +struct pmu pmu; +int domain; +const struct attribute_group *attr_groups[4 ]; +}; + +/* +* Domains for IMA PMUs +*/ +#define IMA_DOMAIN_NEST 1 + +#define UNKNOWN_DOMAIN -1 + +#endif /* PPC_POWERNV_IMA_PMU_DEF_H */
Signature · 1 line
2.7.4
PATCH v2 2/6 powerpc/powernv: Autoload IMA device driver module
In reply to Hemant KumarThis patch does three things :
- Enables "opal.c" to create a platform device for the IMA interface according to the appropriate compatibility string.
- Find the reserved-memory region details from the system device tree and get the base address of HOMER region address for each chip.
- We also get the Nest PMU counter data offsets (in the HOMER region) and their sizes. The offsets for the counters' data are fixed and won't change from chip to chip.
The device tree parsing logic is separated from the PMU creation functions (which is done in subsequent patches). Right now, only Nest units are taken care of.
--- arch/powerpc/platforms/powernv/Makefile | 2 +- arch/powerpc/platforms/powernv/opal-ima.c | 117 ++++++++++++++++++++++++++++++ arch/powerpc/platforms/powernv/opal.c | 13 ++++ 3 files changed, 131 insertions(+), 1 deletion(-) create mode 100644 arch/powerpc/platforms/powernv/opal-ima.c
arch/powerpc/platforms/powernv/Makefile +1 -1
@@ -2,7 +2,7 @@ obj-y += setup.o opal-wrappers.o opal.o opal-async.o idle.o obj-y += opal-rtc.o opal-nvram.o opal-lpc.o opal-flash.o obj-y += rng.o opal-elog.o opal-dump.o opal-sysparam.o opal-sensor.o obj-y += opal-msglog.o opal-hmi.o opal-power.o opal-irqchip.o -obj-y += opal-kmsg.o +obj-y += opal-kmsg.o opal-ima.o obj-$(CONFIG_SMP) += smp.o subcore.o subcore-asm.o obj-$(CONFIG_PCI) += pci.o pci-ioda.o npu-dma.o
arch/powerpc/platforms/powernv/opal-ima.c new file +117 -0
117 lines not on this page · raw message
arch/powerpc/platforms/powernv/opal.c +13 -0
@@ -30,6 +30,7 @@#include <asm/opal.h> #include <asm/firmware.h> #include <asm/mce.h> +#include <asm/ima-pmu.h> #include "powernv.h"
@@ -650,6 +651,15 @@ static void opal_i2c_create_devs(void)of_platform_device_create (np,NULL ,NULL ); } +static void opal_ima_init_dev (void ) +{ +struct device_node *np; + + np =of_find_compatible_node (NULL ,NULL ,IMA_DTB_COMPAT ); +if (np) +of_platform_device_create (np,NULL ,NULL ); +} +static int kopald (void *unused) {unsigned long timeout =msecs_to_jiffies (opal_heartbeat) +1 ;
@@ -723,6 +733,9 @@ static int __init opal_init(void)/* Setup a heatbeat thread if requested by OPAL */ opal_init_heartbeat (); +/* Detect IMA pmu counters support and create PMUs */ +opal_ima_init_dev (); +/* Create leds platform devices */ leds =of_find_node_by_path ("/ibm,opal/leds" );if (leds) {
Signature · 1 line
2.7.4
PATCH v2 3/6 powerpc/powernv: Detect supported IMA units and its events
In reply to Hemant KumarParse device tree to detect IMA units. Traverse through each IMA unit node to find supported events and corresponding unit/scale files (if any).
Right now, only nest IMA units are supported.
The nest IMA unit event node from device tree will contain the offset in the reserved memory region to get the counter data for a given event. The offsets for the nest events are contained in the "reg" property of the event "node".
Kernel code uses this offset as event configuration value.
Device tree parser code also looks for scale/unit property in the event node and passes on the value as an event attr for perf interface to use in the post processing by the perf tool. Some PMUs may have common scale and unit properties which implies that all events supported by this PMU inherit the scale and unit properties of the PMU itself. For those events, we need to set the common unit and scale values.
For failure to initialize any unit or any event, disable that unit and continue setting up the rest of them.
---
Changelog :
v1 -> v2:
- Read from the "event-name" property instead of "name" property for an event node.
- Assign scale and unit values for events for a PMU which has a common unit and scale value.
arch/powerpc/platforms/powernv/opal-ima.c | 332 ++++++++++++++++++++++++++++++ 1 file changed, 332 insertions(+)
arch/powerpc/platforms/powernv/opal-ima.c +332 -0
@@ -32,6 +32,337 @@#include <asm/ima-pmu.h> struct perchip_nest_info nest_perchip_info[IMA_MAX_CHIPS ]; +struct ima_pmu *per_nest_pmu_arr[IMA_MAX_PMUS ]; + +static int ima_event_info (char *name,struct ima_events *events) +{ +char *buf; + +/* memory for content */ + buf =kzalloc (IMA_MAX_PMU_NAME_LEN ,GFP_KERNEL ); +if (!buf) +return -ENOMEM ; + + events->ev_name = name; + events->ev_value = buf; +return 0 ; +} + +static int ima_event_info_str (struct property *pp,char *name, +struct ima_events *events) +{ +int ret; + + ret =ima_event_info (name, events); +if (ret) +return ret; + +if (!pp->value || (strnlen (pp->value, pp->length) == pp->length) || + (pp->length >IMA_MAX_PMU_NAME_LEN )) +return -EINVAL ; +strncpy (events->ev_value, (const char *)pp->value, pp->length); + +return 0 ; +} + +static int ima_event_info_val (char *name,u32 val, +struct ima_events *events) +{ +int ret; + + ret =ima_event_info (name, events); +if (ret) +return ret; +sprintf (events->ev_value,"event=0x%x" , val); + +return 0 ; +} + +static int set_event_property (struct property *pp,char *event_prop, +struct ima_events *events,char *ev_name) +{ +char *buf; +int ret; + + buf =kzalloc (IMA_MAX_PMU_NAME_LEN ,GFP_KERNEL ); +if (!buf) +return -ENOMEM ; + +sprintf (buf,"%s.%s" , ev_name, event_prop); + ret =ima_event_info_str (pp, buf, events); +if (ret) { +kfree (events->ev_name); +kfree (events->ev_value); + } + +return ret; +} + +/* +* ima_events_node_parser: Parse the event node "dev" and assign the parsed +* information to event "events". +* +* Parses the "reg" property of this event. "reg" gives us the event offset. +* Also, parse the "scale" and "unit" properties, if any. +*/ +static int ima_events_node_parser (struct device_node *dev, +struct ima_events *events, +struct property *event_scale, +struct property *event_unit) +{ +struct property *name, *pp; +char *ev_name; +u32 val; +int idx =0 , ret; + +if (!dev) +return -EINVAL ; + +/* +* Loop through each property of an event node +*/ + name =of_find_property (dev,"event-name" ,NULL ); +if (!name) +return -ENODEV ; + +if (!name->value || + (strnlen (name->value, name->length) == name->length) || + (name->length >IMA_MAX_PMU_NAME_LEN )) +return -EINVAL ; + + ev_name =kzalloc (IMA_MAX_PMU_NAME_LEN ,GFP_KERNEL ); +if (!ev_name) +return -ENOMEM ; + +strncpy (ev_name, name->value, name->length); + +/* +* Parse each property of this event node "dev". Property "reg" has +* the offset which is assigned to the event name. Other properties +* like "scale" and "unit" are assigned to event.scale and event.unit +* accordingly. +*/ +for_each_property_of_node (dev, pp) { +/* +* If there is an issue in parsing a single property of +* this event, we just clean up the buffers, but we still +* continue to parse. +*/ +if (strncmp (pp->name,"reg" ,3 ) ==0 ) { +of_property_read_u32 (dev, pp->name, &val); + ret =ima_event_info_val (ev_name, val, &events[idx]); +if (ret) { +kfree (events[idx].ev_name); +kfree (events[idx].ev_value); +continue ; + } +/* +* If the common scale and unit properties available, +* then, assign them to this event +*/ +if (event_scale) { + idx++; + ret =set_event_property (event_scale,"scale" , + &events[idx], + ev_name); +if (ret) +continue ; + idx++; + } +if (event_unit) { + ret =set_event_property (event_unit,"unit" , + &events[idx], + ev_name); +if (ret) +continue ; + } + idx++; + }else if (strncmp (pp->name,"unit" ,4 ) ==0 ) { + ret =set_event_property (pp,"unit" , &events[idx], + ev_name); +if (ret) +continue ; + idx++; + }else if (strncmp (pp->name,"scale" ,5 ) ==0 ) { + ret =set_event_property (pp,"scale" , &events[idx], + ev_name); +if (ret) +continue ; + idx++; + } + } + +return idx; +} + +/* +* ima_get_domain : Returns the domain for pmu "pmu_dev". +*/ +int ima_get_domain (struct device_node *pmu_dev) +{ +if (of_device_is_compatible (pmu_dev,IMA_DTB_NEST_COMPAT )) +return IMA_DOMAIN_NEST ; +else +return UNKNOWN_DOMAIN ; +} + +/* +* get_nr_children : Returns the number of children for a pmu device node. +*/ +static int get_nr_children (struct device_node *pmu_node) +{ +struct device_node *child; +int i =0 ; + +for_each_child_of_node (pmu_node, child) + i++; +return i; +} + +/* +* ima_free_events : Cleanup the "events" list having "nr_entries" entries. +*/ +static void ima_free_events (struct ima_events *events,int nr_entries) +{ +int i; + +/* Nothing to clean, return */ +if (!events) +return ; +for (i =0 ; i < nr_entries; i++) { +kfree (events[i].ev_name); +kfree (events[i].ev_value); + } + +kfree (events); +} + +/* +* ima_pmu_create : Takes the parent device which is the pmu unit and a +* pmu_index as the inputs. +* Allocates memory for the pmu, sets up its domain (NEST or CORE), and +* allocates memory for the events supported by this pmu. Assigns a name for +* the pmu. Calls ima_events_node_parser() to setup the individual events. +* If everything goes fine, it calls, init_ima_pmu() to setup the pmu device +* and register it. +*/ +static int ima_pmu_create (struct device_node *parent,int pmu_index) +{ +struct device_node *ev_node; +struct ima_events *events; +struct ima_pmu *pmu_ptr; +struct property *pp, *scale_pp, *unit_pp; +char *buf; +int idx =0 , ret, nr_children =0 ; + +if (!parent) +return -EINVAL ; + +/* memory for pmu */ + pmu_ptr =kzalloc (sizeof (struct ima_pmu ),GFP_KERNEL ); +if (!pmu_ptr) +return -ENOMEM ; + + pmu_ptr->domain =ima_get_domain (parent); +if (pmu_ptr->domain ==UNKNOWN_DOMAIN ) + goto free_pmu; + +/* Needed for hotplug/migration */ + per_nest_pmu_arr[pmu_index] = pmu_ptr; + +/* +* Get the maximum no. of events in this node. +* Multiply by 3 to account for .scale and .unit properties +* This number suggests the amount of memory needed to setup the +* events for this pmu. +*/ + nr_children =get_nr_children (parent) *3 ; + +/* memory for pmu events */ + events =kzalloc ((sizeof (struct ima_events ) * nr_children), +GFP_KERNEL ); +if (!events) { + ret = -ENOMEM ; + goto free_pmu; + } + + pp =of_find_property (parent,"name" ,NULL ); +if (!pp) { + ret = -ENODEV ; + goto free_events; + } + +if (!pp->value || + (strnlen (pp->value, pp->length) == pp->length) || + (pp->length >IMA_MAX_PMU_NAME_LEN )) { + ret = -EINVAL ; + goto free_events; + } + + buf =kzalloc (IMA_MAX_PMU_NAME_LEN ,GFP_KERNEL ); +if (!buf) { + ret = -ENOMEM ; + goto free_events; + } + +/* Save the name to register it later */ +sprintf (buf,"nest_%s" , (char *)pp->value); + pmu_ptr->pmu.name = (char *)buf; + +/* +* Check if there is a common "scale" and "unit" properties inside +* the PMU node for all the events supported by this PMU. +*/ + scale_pp =of_find_property (parent,"scale" ,NULL ); + unit_pp =of_find_property (parent,"unit" ,NULL ); + +/* Loop through event nodes */ +for_each_child_of_node (parent, ev_node) { + ret =ima_events_node_parser (ev_node, &events[idx], scale_pp, + unit_pp); +if (ret <0 ) { +/* Unable to parse this event */ +if (ret == -ENOMEM ) + goto free_events; +continue ; + } + +/* +* ima_event_node_parser will return number of +* event entries created for this. This could include +* event scale and unit files also. +*/ + idx += ret; + } + +return 0 ; + +free_events: +ima_free_events (events, idx); +free_pmu: +kfree (pmu_ptr); +return ret; +} + +/* +* ima_pmu_setup : Setup the IMA PMUs (children of "parent"). +*/ +static void ima_pmu_setup (struct device_node *parent) +{ +struct device_node *child; +int pmu_count =0 , rc =0 ; + +if (!parent) +return ; + +/* Setup all the IMA pmus */ +for_each_child_of_node (parent, child) { +ima_pmu_create (child, pmu_count); +if (rc) +return ; + pmu_count++; + } +}static int opal_ima_counters_probe (struct platform_device *pdev) {
@@ -93,6 +424,7 @@ static int opal_ima_counters_probe(struct platform_device *pdev) }while (i < (pcni->size /PAGE_SIZE )); } +ima_pmu_setup (ima_dev);return 0 ; err:return -ENODEV ;
Signature · 1 line
2.7.4
PATCH v2 4/6 powerpc/perf: Add event attribute and group to IMA pmus
In reply to Hemant KumarDevice tree IMA driver code parses the IMA units and their events. It passes the information to IMA pmu code which is placed in powerpc/perf as "ima-pmu.c".
This patch creates only event attributes and attribute groups for the IMA pmus.
---
Changelog:
v1 -> v2:
- Changes to Makefile to only enable this feature for CONFIG_PPC_POWERNV=y
arch/powerpc/perf/Makefile | 6 +- arch/powerpc/perf/ima-pmu.c | 96 +++++++++++++++++++++++++++++++ arch/powerpc/platforms/powernv/opal-ima.c | 12 +++- 3 files changed, 111 insertions(+), 3 deletions(-) create mode 100644 arch/powerpc/perf/ima-pmu.c
arch/powerpc/perf/Makefile +5 -1
@@ -2,10 +2,14 @@ subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror obj-$(CONFIG_PERF_EVENTS) += callchain.o perf_regs.o +ima-$(CONFIG_PPC_POWERNV) += ima-pmu.o + obj-$(CONFIG_PPC_PERF_CTRS) += core-book3s.o bhrb.o obj64-$(CONFIG_PPC_PERF_CTRS) += power4-pmu.o ppc970-pmu.o power5-pmu.o \ power5+-pmu.o power6-pmu.o power7-pmu.o \ - isa207-common.o power8-pmu.o power9-pmu.o + isa207-common.o power8-pmu.o power9-pmu.o \ + $(ima-y) + obj32-$(CONFIG_PPC_PERF_CTRS) += mpc7450-pmu.o obj-$(CONFIG_FSL_EMB_PERF_EVENT) += core-fsl-emb.o
arch/powerpc/perf/ima-pmu.c new file +96 -0
96 lines not on this page · raw message
arch/powerpc/platforms/powernv/opal-ima.c +10 -2
@@ -31,8 +31,11 @@#include <asm/cputable.h> #include <asm/ima-pmu.h> -struct perchip_nest_info nest_perchip_info[IMA_MAX_CHIPS ]; -struct ima_pmu *per_nest_pmu_arr[IMA_MAX_PMUS ]; +extern struct perchip_nest_info nest_perchip_info[IMA_MAX_CHIPS ]; +extern struct ima_pmu *per_nest_pmu_arr[IMA_MAX_PMUS ]; + +extern int init_ima_pmu (struct ima_events *events, +int idx,struct ima_pmu *pmu_ptr);static int ima_event_info (char *name,struct ima_events *events) {
@@ -335,6 +338,11 @@ static int ima_pmu_create(struct device_node *parent, int pmu_index) idx += ret; } + ret =init_ima_pmu (events, idx, pmu_ptr); +if (ret) { +pr_err ("IMA PMU %s Register failed\n" , pmu_ptr->pmu.name); + goto free_events; + }return 0 ; free_events:
Signature · 1 line
2.7.4
PATCH v2 5/6 powerpc/perf: Generic ima pmu event functions
In reply to Hemant KumarSince, the IMA counters' data are periodically fed to a memory location, the functions to read/update, start/stop, add/del can be generic and can be used by all IMA PMU units.
This patch adds a set of generic ima pmu related event functions to be used by each ima pmu unit. Add code to setup format attribute and to register ima pmus. Add a event_init function for nest_ima events.
--- arch/powerpc/include/asm/ima-pmu.h | 2 + arch/powerpc/perf/ima-pmu.c | 122 ++++++++++++++++++++++++++++++ arch/powerpc/platforms/powernv/opal-ima.c | 37 +++++++-- 3 files changed, 154 insertions(+), 7 deletions(-)
arch/powerpc/include/asm/ima-pmu.h +2 -0
@@ -70,4 +70,6 @@ struct ima_pmu {#define UNKNOWN_DOMAIN -1 +int ima_get_domain (struct device_node *pmu_dev); +#endif /* PPC_POWERNV_IMA_PMU_DEF_H */
arch/powerpc/perf/ima-pmu.c +122 -0
134 lines not on this page · raw message
arch/powerpc/platforms/powernv/opal-ima.c +30 -7
@@ -34,6 +34,8 @@extern struct perchip_nest_info nest_perchip_info[IMA_MAX_CHIPS ];extern struct ima_pmu *per_nest_pmu_arr[IMA_MAX_PMUS ]; +u64 nest_max_offset; +extern int init_ima_pmu (struct ima_events *events,int idx,struct ima_pmu *pmu_ptr);
@@ -68,8 +70,25 @@ static int ima_event_info_str(struct property *pp, char *name,return 0 ; } +/* +* Updates the maximum offset for an event in the pmu with domain +* "pmu_domain". Right now, only nest domain is supported. +*/ +static void update_max_value (u32 value,int pmu_domain) +{ +switch (pmu_domain) { +case IMA_DOMAIN_NEST : +if (nest_max_offset < value) + nest_max_offset = value; +break ; +default : +/* Unknown domain, return */ +return ; + } +} +static int ima_event_info_val (char *name,u32 val, -struct ima_events *events) +struct ima_events *events,int pmu_domain) {int ret;
@@ -77,6 +96,7 @@ static int ima_event_info_val(char *name, u32 val,if (ret)return ret;sprintf (events->ev_value,"event=0x%x" , val); +update_max_value (val, pmu_domain);return 0 ; }
@@ -111,7 +131,8 @@ static int set_event_property(struct property *pp, char *event_prop,static int ima_events_node_parser (struct device_node *dev,struct ima_events *events,struct property *event_scale, -struct property *event_unit) +struct property *event_unit, +int pmu_domain) {struct property *name, *pp;char *ev_name;
@@ -153,7 +174,8 @@ static int ima_events_node_parser(struct device_node *dev,*/ if (strncmp (pp->name,"reg" ,3 ) ==0 ) {of_property_read_u32 (dev, pp->name, &val); - ret =ima_event_info_val (ev_name, val, &events[idx]); + ret =ima_event_info_val (ev_name, val, &events[idx], + pmu_domain);if (ret) {kfree (events[idx].ev_name);kfree (events[idx].ev_value);
@@ -243,9 +265,10 @@ static void ima_free_events(struct ima_events *events, int nr_entries)/* * ima_pmu_create : Takes the parent device which is the pmu unit and a * pmu_index as the inputs. -* Allocates memory for the pmu, sets up its domain (NEST or CORE), and -* allocates memory for the events supported by this pmu. Assigns a name for -* the pmu. Calls ima_events_node_parser() to setup the individual events. +* Allocates memory for the pmu, sets up its domain (right now, only NEST), +* and allocates memory for the events supported by this pmu. Assigns a name +* for the pmu. Calls ima_events_node_parser() to setup the individual +* events. * If everything goes fine, it calls, init_ima_pmu() to setup the pmu device * and register it. */
@@ -322,7 +345,7 @@ static int ima_pmu_create(struct device_node *parent, int pmu_index)/* Loop through event nodes */ for_each_child_of_node (parent, ev_node) { ret =ima_events_node_parser (ev_node, &events[idx], scale_pp, - unit_pp); + unit_pp, pmu_ptr->domain);if (ret <0 ) {/* Unable to parse this event */ if (ret == -ENOMEM )
Signature · 1 line
2.7.4
PATCH v2 6/6 powerpc/perf: IMA pmu cpumask and cpu hotplug support
In reply to Hemant KumarAdds cpumask attribute to be used by each IMA pmu. Only one cpu (any online CPU) from each chip for nest PMUs is designated to read counters.
On CPU hotplug, dying CPU is checked to see whether it is one of the designated cpus, if yes, next online cpu from the same chip (for nest units) is designated as new cpu to read counters.
--- arch/powerpc/include/asm/opal-api.h | 3 +- arch/powerpc/include/asm/opal.h | 2 + arch/powerpc/perf/ima-pmu.c | 167 ++++++++++++++++++++++++- arch/powerpc/platforms/powernv/opal-wrappers.S | 1 + 4 files changed, 171 insertions(+), 2 deletions(-)
arch/powerpc/include/asm/opal-api.h +2 -1
@@ -167,7 +167,8 @@#define OPAL_INT_EOI 124#define OPAL_INT_SET_MFRR 125#define OPAL_PCI_TCE_KILL 126 -#define OPAL_LAST 126 +#define OPAL_NEST_IMA_COUNTERS_CONTROL 128 +#define OPAL_LAST 128/* Device tree flags */
arch/powerpc/include/asm/opal.h +2 -0
@@ -229,6 +229,8 @@ int64_t opal_pci_tce_kill(uint64_t phb_id, uint32_t kill_type,int64_t opal_rm_pci_tce_kill (uint64_t phb_id,uint32_t kill_type,uint32_t pe_num,uint32_t tce_size,uint64_t dma_addr,uint32_t npages); +int64_t opal_nest_ima_counters_control (uint64_t mode,uint64_t value1, +uint64_t value2,uint64_t value3);/* Internal functions */ extern int early_init_dt_scan_opal(unsigned long node, const char *uname,
arch/powerpc/perf/ima-pmu.c +166 -1
197 lines not on this page · raw message
arch/powerpc/platforms/powernv/opal-wrappers.S +1 -0
@@ -309,3 +309,4 @@ OPAL_CALL(opal_int_eoi, OPAL_INT_EOI); OPAL_CALL(opal_int_set_mfrr, OPAL_INT_SET_MFRR); OPAL_CALL(opal_pci_tce_kill, OPAL_PCI_TCE_KILL); OPAL_CALL_REAL(opal_rm_pci_tce_kill, OPAL_PCI_TCE_KILL); +OPAL_CALL(opal_nest_ima_counters_control, OPAL_NEST_IMA_COUNTERS_CONTROL);
Signature · 1 line
2.7.4