Skip to contentSkip to conversation

Pull request: u-boot-spi/sunxi

U-Boot Jagan Teki 3 participants 4 messages Nov 24, 2016

lore
Share & tools
lore

Jagan Teki

author
#0 lore raw

Hi Tom,

These are the pending patches, from u-boot-sunxi/next.

Will send sunxi PR on top of u-boot-sunxi repo once I get the access, meanwhile please take this PR.

Hans, Let me know if I miss any patches from next.

thanks!
Jagan.

The following changes since commit fc127d184aea293ec415dd66e3282dba0b66c5f3:

colibri_pxa270: drop edit, elf, fpga, hush, regex et al. for space reason (2016-11-23 13:53:20 +0100)

are available in the git repository at:

git://git.denx.de/u-boot-spi.git sunxi

for you to fetch changes up to e68a831cacc85ea1da274f3c8d19bb98c1141a97:

nand: sunxi: Add options for the SPL NAND configuration (2016-11-24 19:40:49 +0530)

----------------------------------------------------------------
Boris Brezillon (1):
mtd: nand: add support for the TC58NVG2S0H chip

Chen-Yu Tsai (9):
ARM: PSCI: Set ARMV7_PSCI_NR_CPUS default to 8 for sun9i/A80
sunxi: Add CCI-400 and CPUCFG registers base address for sun9i/A80
sunxi: Add base address of secure SRAM B for sun9i/A80
sunxi: Use secure SRAM B for secure RAM for sun9i/A80
sunxi: Add PRCM register definition for sun9i/A80
sunxi: Add CPUCFG register definitions for sun9i/A80
sunxi: Add support for TZPC on sun9i/A80
sunxi: Add basic PSCI implementation for A80
sunxi: Enable PSCI on sun9i/A80

Emmanuel Vadot (1):
sunxi: mmc: Set CONFIG_SYS_MMC_MAX_DEVICE

Hans de Goede (1):
sunxi: Mele_M5_defconfig: Drop non existing STATUSLED setting

Jelle van der Waa (1):
sunxi: Use the available Kconfig option for AHCI

Marcel Ziswiler (1):
colibri_pxa270: transition to driver model for serial

Maxime Ripard (3):
sunxi: Sync GR8 DTS and AXP209 with the kernel
tools: sunxi: Add spl image builder
nand: sunxi: Add options for the SPL NAND configuration

Yann E. MORIN (1):
arm: sunxi: do not force USB for arch-sunxi

 arch/arm/Kconfig                               |   10 +-
 arch/arm/cpu/armv7/Kconfig                     |    1 +
 arch/arm/cpu/armv7/sunxi/Makefile              |    5 +
 arch/arm/cpu/armv7/sunxi/psci-mcpm.c           |  234 +++++
 arch/arm/cpu/armv7/sunxi/tzpc.c                |    6 +
 arch/arm/dts/Makefile                          |    1 +
 arch/arm/dts/axp209.dtsi                       |    6 +
 arch/arm/dts/ntc-gr8-chip-pro.dts              |  266 ++++++
 arch/arm/dts/ntc-gr8.dtsi                      | 1132 ++++++++++++++++++++++++
 arch/arm/include/asm/arch-sunxi/cpu_sun9i.h    |    5 +
 arch/arm/include/asm/arch-sunxi/cpucfg_sun9i.h |   51 ++
 arch/arm/include/asm/arch-sunxi/prcm_sun9i.h   |   55 ++
 arch/arm/include/asm/arch-sunxi/tzpc.h         |    4 +
 arch/arm/mach-sunxi/board.c                    |    3 +-
 board/sunxi/Kconfig                            |    4 +
 board/toradex/colibri_pxa270/colibri_pxa270.c  |   18 +-
 configs/A10-OLinuXino-Lime_defconfig           |    3 +-
 configs/A20-OLinuXino-Lime2_defconfig          |    3 +-
 configs/A20-OLinuXino-Lime_defconfig           |    3 +-
 configs/A20-OLinuXino_MICRO_defconfig          |    3 +-
 configs/A20-Olimex-SOM-EVB_defconfig           |    3 +-
 configs/Bananapi_defconfig                     |    3 +-
 configs/Bananapro_defconfig                    |    3 +-
 configs/Cubieboard2_defconfig                  |    3 +-
 configs/Cubieboard_defconfig                   |    3 +-
 configs/Cubietruck_defconfig                   |    3 +-
 configs/Itead_Ibox_A20_defconfig               |    3 +-
 configs/Lamobo_R1_defconfig                    |    3 +-
 configs/Linksprite_pcDuino3_Nano_defconfig     |    3 +-
 configs/Linksprite_pcDuino3_defconfig          |    3 +-
 configs/Marsboard_A10_defconfig                |    3 +-
 configs/Mele_A1000_defconfig                   |    3 +-
 configs/Mele_M5_defconfig                      |    3 +-
 configs/Orangepi_defconfig                     |    3 +-
 configs/Orangepi_mini_defconfig                |    3 +-
 configs/Wits_Pro_A20_DKT_defconfig             |    3 +-
 configs/colibri_pxa270_defconfig               |    2 +
 drivers/mtd/nand/Kconfig                       |   16 +
 drivers/mtd/nand/nand_ids.c                    |    3 +
 include/configs/colibri_pxa270.h               |    2 -
 include/configs/sun9i.h                        |    4 +
 include/configs/sunxi-common.h                 |    1 +
 scripts/config_whitelist.txt                   |    1 -
 tools/.gitignore                               |    1 +
 tools/Makefile                                 |    1 +
 tools/sunxi-spl-image-builder.c                | 1117 +++++++++++++++++++++++
 46 files changed, 2978 insertions(+), 31 deletions(-)
 create mode 100644 arch/arm/cpu/armv7/sunxi/psci-mcpm.c
 create mode 100644 arch/arm/dts/ntc-gr8-chip-pro.dts
 create mode 100644 arch/arm/dts/ntc-gr8.dtsi
 create mode 100644 arch/arm/include/asm/arch-sunxi/cpucfg_sun9i.h
 create mode 100644 arch/arm/include/asm/arch-sunxi/prcm_sun9i.h
 create mode 100644 tools/sunxi-spl-image-builder.c
#1 lore raw
Quoted 48 lines · Jagan Teki

Hi Tom,

These are the pending patches, from u-boot-sunxi/next.

Will send sunxi PR on top of u-boot-sunxi repo once I get the access, meanwhile please take this PR.

Hans, Let me know if I miss any patches from next.

thanks!
Jagan.

The following changes since commit fc127d184aea293ec415dd66e3282dba0b66c5f3:

colibri_pxa270: drop edit, elf, fpga, hush, regex et al. for space reason (2016-11-23 13:53:20 +0100)

are available in the git repository at:

git://git.denx.de/u-boot-spi.git sunxi

for you to fetch changes up to e68a831cacc85ea1da274f3c8d19bb98c1141a97:

nand: sunxi: Add options for the SPL NAND configuration (2016-11-24 19:40:49 +0530)

----------------------------------------------------------------
Boris Brezillon (1):
mtd: nand: add support for the TC58NVG2S0H chip

Chen-Yu Tsai (9):
ARM: PSCI: Set ARMV7_PSCI_NR_CPUS default to 8 for sun9i/A80
sunxi: Add CCI-400 and CPUCFG registers base address for sun9i/A80
sunxi: Add base address of secure SRAM B for sun9i/A80
sunxi: Use secure SRAM B for secure RAM for sun9i/A80
sunxi: Add PRCM register definition for sun9i/A80
sunxi: Add CPUCFG register definitions for sun9i/A80
sunxi: Add support for TZPC on sun9i/A80
sunxi: Add basic PSCI implementation for A80
sunxi: Enable PSCI on sun9i/A80

Emmanuel Vadot (1):
sunxi: mmc: Set CONFIG_SYS_MMC_MAX_DEVICE

Hans de Goede (1):
sunxi: Mele_M5_defconfig: Drop non existing STATUSLED setting

Jelle van der Waa (1):
sunxi: Use the available Kconfig option for AHCI

Quoted 7 lines

Marcel Ziswiler (1):
colibri_pxa270: transition to driver model for serial

Maxime Ripard (3):
sunxi: Sync GR8 DTS and AXP209 with the kernel
tools: sunxi: Add spl image builder
nand: sunxi: Add options for the SPL NAND configuration

Hmmm, I'm not sure why it's in though.

I sent an update version of those since the first iteration had issues.

Maxime

Signature · 10 lines
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20161124/ece82f6f/attachment.sig>
#2 lore raw

Hi,

Quoted 57 lines · Maxime Ripard
Quoted 48 lines · Jagan Teki

Hi Tom,

These are the pending patches, from u-boot-sunxi/next.

Will send sunxi PR on top of u-boot-sunxi repo once I get the access, meanwhile please take this PR.

Hans, Let me know if I miss any patches from next.

thanks!
Jagan.

The following changes since commit fc127d184aea293ec415dd66e3282dba0b66c5f3:

colibri_pxa270: drop edit, elf, fpga, hush, regex et al. for space reason (2016-11-23 13:53:20 +0100)

are available in the git repository at:

git://git.denx.de/u-boot-spi.git sunxi

for you to fetch changes up to e68a831cacc85ea1da274f3c8d19bb98c1141a97:

nand: sunxi: Add options for the SPL NAND configuration (2016-11-24 19:40:49 +0530)

----------------------------------------------------------------
Boris Brezillon (1):
mtd: nand: add support for the TC58NVG2S0H chip

Chen-Yu Tsai (9):
ARM: PSCI: Set ARMV7_PSCI_NR_CPUS default to 8 for sun9i/A80
sunxi: Add CCI-400 and CPUCFG registers base address for sun9i/A80
sunxi: Add base address of secure SRAM B for sun9i/A80
sunxi: Use secure SRAM B for secure RAM for sun9i/A80
sunxi: Add PRCM register definition for sun9i/A80
sunxi: Add CPUCFG register definitions for sun9i/A80
sunxi: Add support for TZPC on sun9i/A80
sunxi: Add basic PSCI implementation for A80
sunxi: Enable PSCI on sun9i/A80

Emmanuel Vadot (1):
sunxi: mmc: Set CONFIG_SYS_MMC_MAX_DEVICE

Hans de Goede (1):
sunxi: Mele_M5_defconfig: Drop non existing STATUSLED setting

Jelle van der Waa (1):
sunxi: Use the available Kconfig option for AHCI

Quoted 7 lines

Marcel Ziswiler (1):
colibri_pxa270: transition to driver model for serial

Maxime Ripard (3):
sunxi: Sync GR8 DTS and AXP209 with the kernel
tools: sunxi: Add spl image builder
nand: sunxi: Add options for the SPL NAND configuration

Quoted 4 lines

Hmmm, I'm not sure why it's in though.

I sent an update version of those since the first iteration had issues.

Probably my bad, I put this in u-boot-sunxi/next before I stepped down as maintainer. Which of these 3 patches need to be dropped exactly?

Otherwise this pull-req looks good. Jagan, thank you for your work on this!

Regards,

Hans

author
#3 lore raw
Quoted 73 lines · Hans de Goede

Hi,

Quoted 63 lines · Maxime Ripard
Quoted 52 lines · Jagan Teki

Hi Tom,

These are the pending patches, from u-boot-sunxi/next.

Will send sunxi PR on top of u-boot-sunxi repo once I get the access, meanwhile please take this PR.

Hans, Let me know if I miss any patches from next.

thanks!
Jagan.

The following changes since commit
fc127d184aea293ec415dd66e3282dba0b66c5f3:

colibri_pxa270: drop edit, elf, fpga, hush, regex et al. for space
reason (2016-11-23 13:53:20 +0100)

are available in the git repository at:

git://git.denx.de/u-boot-spi.git sunxi

for you to fetch changes up to e68a831cacc85ea1da274f3c8d19bb98c1141a97:

nand: sunxi: Add options for the SPL NAND configuration (2016-11-24
19:40:49 +0530)

----------------------------------------------------------------
Boris Brezillon (1):
mtd: nand: add support for the TC58NVG2S0H chip

Chen-Yu Tsai (9):
ARM: PSCI: Set ARMV7_PSCI_NR_CPUS default to 8 for sun9i/A80
sunxi: Add CCI-400 and CPUCFG registers base address for sun9i/A80
sunxi: Add base address of secure SRAM B for sun9i/A80
sunxi: Use secure SRAM B for secure RAM for sun9i/A80
sunxi: Add PRCM register definition for sun9i/A80
sunxi: Add CPUCFG register definitions for sun9i/A80
sunxi: Add support for TZPC on sun9i/A80
sunxi: Add basic PSCI implementation for A80
sunxi: Enable PSCI on sun9i/A80

Emmanuel Vadot (1):
sunxi: mmc: Set CONFIG_SYS_MMC_MAX_DEVICE

Hans de Goede (1):
sunxi: Mele_M5_defconfig: Drop non existing STATUSLED setting

Jelle van der Waa (1):
sunxi: Use the available Kconfig option for AHCI

Quoted 7 lines

Marcel Ziswiler (1):
colibri_pxa270: transition to driver model for serial

Maxime Ripard (3):
sunxi: Sync GR8 DTS and AXP209 with the kernel
tools: sunxi: Add spl image builder
nand: sunxi: Add options for the SPL NAND configuration

Quoted 4 lines

Hmmm, I'm not sure why it's in though.

I sent an update version of those since the first iteration had issues.

Quoted 6 lines

Probably my bad, I put this in u-boot-sunxi/next before I stepped down as maintainer. Which of these 3 patches need to be dropped exactly?

Otherwise this pull-req looks good. Jagan, thank you for your work on this!

OK, couldn't see Maxime latest series. Will remove these 3 and send the PR.

thanks!

Signature · 4 lines
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.