Patch "ARM: dts: orion5x: fix number of sata port for linkstation ls-gl" has been added to the 4.8-stable tree

This is a note to let you know that I've just added the patch titled

ARM: dts: orion5x: fix number of sata port for linkstation ls-gl

to the 4.8-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
arm-dts-orion5x-fix-number-of-sata-port-for-linkstation-ls-gl.patch
and it can be found in the queue-4.8 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

From: Roger Shimizu <[email protected]>
Date: Fri, 2 Dec 2016 00:11:12 +0900
Subject: ARM: dts: orion5x: fix number of sata port for linkstation ls-gl

From: Roger Shimizu <[email protected]>

commit 038ccb3e8cee52e07dc118ff99f47eaebc1d0746 upstream.

Bug report from Debian [0] shows there's minor changed model of Linkstation LS-GL that uses the 2nd SATA port of the SoC. So it's necessary to enable two SATA ports, though for that specific model only the 2nd one is used.

[0] https://bugs.debian.org/845611

---
 arch/arm/boot/dts/orion5x-linkstation-lsgl.dts |    4 ++++
 1 file changed, 4 insertions(+)

@@ -82,6 +82,10 @@
 	gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
 };
 
+&sata {
+	nr-ports = <2>;
+};
+
 &ehci1 {
 	status = "okay";
 };

Patches currently in stable-queue which might be from [email protected] are

queue-4.8/arm-dts-orion5x-fix-number-of-sata-port-for-linkstation-ls-gl.patch