Skip to contentSkip to conversation

imx6: icorem6: Rename engicam icorem6 defconfig files

PATCH New Jagan Teki 2 participants 2 messages Dec 16, 2016 Arm i.MX and Layerscape

lore
Share & tools
lore

Jagan Teki

author
#0 lore raw

PATCH v5 10/16 imx6: icorem6: Rename engicam icorem6 defconfig files

From: Jagan Teki <[email protected]>

Rename defconfig files for better compatible with
respective board names and dts files.

Cc Stefano Babic <[email protected]>
Cc Matteo Lisi <[email protected]>
Cc Michael Trimarchi <[email protected]>
Signed-off-by Jagan Teki <[email protected]>

---
Changes for v5:
- Add missing CONFIG_VIDEO_IPUV3 in configs/imx6q_icore_[mmc|nand]_defconfig

 board/engicam/icorem6/MAINTAINERS                  |  6 ++-
 board/engicam/icorem6/README                       | 19 ++++-----
 ...re_mmc_defconfig => imx6dl_icore_mmc_defconfig} |  0
 ..._nand_defconfig => imx6dl_icore_nand_defconfig} |  0
 configs/imx6q_icore_mmc_defconfig                  | 47 ++++++++++++++++++++++
 configs/imx6q_icore_nand_defconfig                 | 42 +++++++++++++++++++
 6 files changed, 100 insertions(+), 14 deletions(-)
 rename configs/{imx6qdl_icore_mmc_defconfig => imx6dl_icore_mmc_defconfig} (100%)
 rename configs/{imx6qdl_icore_nand_defconfig => imx6dl_icore_nand_defconfig} (100%)
 create mode 100644 configs/imx6q_icore_mmc_defconfig
 create mode 100644 configs/imx6q_icore_nand_defconfig
board/engicam/icorem6/MAINTAINERS +4 -2
index a425afb..0ef3a2c 100644
@@ -3,5 +3,7 @@ M:	Jagan Teki <[email protected]>
 S:	Maintained
 F:	board/engicam/icorem6
 F:	include/configs/imx6qdl_icore.h
-F:	configs/imx6qdl_icore_mmc_defconfig
-F:	configs/imx6qdl_icore_nand_defconfig
+F:	configs/imx6q_icore_mmc_defconfig
+F:	configs/imx6q_icore_nand_defconfig
+F:	configs/imx6dl_icore_mmc_defconfig
+F:	configs/imx6dl_icore_nand_defconfig
board/engicam/icorem6/README +7 -12
index e47f85f..6461c0a 100644
@@ -1,18 +1,16 @@
-How to use U-Boot on Engicam i.CoreM6 DualLite/Solo and Quad/Dual Starter Kit:
+How to use U-Boot on Engicam i.CoreM6 Solo/DualLite and Quad/Dual Starter Kit:
 -----------------------------------------------------------------------------
 
-- Configure U-Boot for Engicam i.CoreM6 QDL:
-
 $ make mrproper
-$ make imx6qdl_icore_mmc_defconfig
-
-- Build for i.CoreM6 DualLite/Solo
 
-$ make
+- Configure U-Boot for Engicam i.CoreM6 Quad/Dual:
+$ make imx6q_icore_mmc_defconfig
 
-- Build for i.CoreM6 Quad/Dual
+- Configure U-Boot for Engicam i.CoreM6 Solo/DualLite:
+$ make imx6dl_icore_mmc_defconfig
 
-$ make DEVICE_TREE=imx6q-icore
+- Build U-Boot
+$ make
 
 This will generate the SPL image called SPL and the u-boot-dtb.img.
 

@@ -33,6 +31,3 @@ MMC Boot: JM3 Closed
 
 - Insert the micro SD card in the board, power it up and U-Boot messages should
 come up.
-
-- Note: For loading Linux on Quad/Dual modules set the dtb as
-  icorem6qdl> setenv fdt_file imx6q-icore.dtb
configs/imx6dl_icore_mmc_defconfig renamed from configs/imx6qdl_icore_mmc_defconfig +0 -0
similarity index 100%
rename from configs/imx6qdl_icore_mmc_defconfig
rename to configs/imx6dl_icore_mmc_defconfig
configs/imx6dl_icore_nand_defconfig renamed from configs/imx6qdl_icore_nand_defconfig +0 -0
similarity index 100%
rename from configs/imx6qdl_icore_nand_defconfig
rename to configs/imx6dl_icore_nand_defconfig
configs/imx6q_icore_mmc_defconfig new file +47 -0

47 lines not on this page · raw message

configs/imx6q_icore_nand_defconfig new file +42 -0

42 lines not on this page · raw message

Signature · 1 line
1.9.1
#1 lore raw

PATCH v5 10/16 imx6: icorem6: Rename engicam icorem6 defconfig files

Quoted 5 lines · Jagan Teki

From: Jagan Teki <[email protected]>

Rename defconfig files for better compatible with respective board names and dts files.

Quoted 8 lines
Cc Stefano Babic <[email protected]>
Cc Matteo Lisi <[email protected]>
Cc Michael Trimarchi <[email protected]>
Signed-off-by Jagan Teki <[email protected]>

---
Changes for v5:
- Add missing CONFIG_VIDEO_IPUV3 in configs/imx6q_icore_[mmc|nand]_defconfig

ok, we are now quite ready. I am building everything again and then I push to the server.

Regards,
Stefano

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================